AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 15.0
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Test builds: https://drive.google.com/open?id=1YBhi3TEGJb4NG5kFhekQiBrNiczu3m78
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Gapps: https://opengapps.org/ (Use nano or Micro, I have only tested nano)
20s firmware https://androidfilehost.com/?w=files&flid=165490
If you're dirty flashing, you might need to delete the locksettings.db file in /data/system
TWRP:
https://xdaforums.com/t/recovery-official-twrp-for-the-leeco-le-pro3-x727-x720-x722-zl1-zl0.4217101/
You tell...
FAQ:
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once (unless if you wipe the system)!
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash unless if you wipe the system
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_leeco_msm8996/tree/q10.0
Device trees:
https://github.com/AICP/device_leeco_zl1/tree/q10.0
https://github.com/AICP/device_leeco_msm8996-common/tree/q10.0
Vendor:
https://github.com/AICP/proprietary_vendor_leeco/tree/q10.0
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
XDA:DevDB Information
AICP, ROM for the LeEco Le Pro3
Contributors:
andr68rus,
infrag,
darkobas,
jrior001,
codeworkx,
villarleg,
wartomato,
ThE_MarD,
Lucchetto00,
mosimchah
ROM OS Version: 10.0.0 Q
Kernel: Linux 3.18.140
Version Information:
Status: Stable/Weekly
Release Date: 2019-09-18
You want to see a "normal" night at the "DEV office", click You want to see a "normal" night at the "DEV office", click here!!
Last edited:
