[Guide] Complete Newbie Guide to Root & Install a Custom Rom [Updated 26/08]

Search This thread

mrbubba999

Senior Member
Mar 28, 2010
1,801
200
Google Pixel C
I managed to resolve, so if anyone is still having the problem, this is how to sort it.

Fastboot the Hero (press and hold the back button whilst powering on). Connect the phone to the USB cable and to the PC. Then go to device manager and select the HTC Hero in the list and update the driver. Choose the X64 drivers that are attached in the first post.
You should now be able to just run the RUU exe file and it should work....at least it did for me.

That was the longest part of the whole process, its taken me 3 hours to do and hopefully it will be worth it. My phone is just booting up with Villain4Beta2 (takes ages to boot up!!)
 

btdag

Senior Member
Nov 25, 2009
828
19
Bournemouth
@btdag

ok thanks but does that mean i'll have to use the goldcard method?

Probably, but not necessarily. Try the other method and if you get access denied error (you'll understand when you see it) then you'll have to try the gold card one.

they said my phone was bricked so they changed it for me . is it really necessary to upgrade the radio?

It isn't necessary, but as the radio deals with the signal stations which the phone connects to it is recommended to have the latest one for the best signal. To be honest I have crap signal on any of the radio's so it doesn't change much for me but each experience is different.

I'm having the same issue and doing the above doesn't make a difference.

Its loads the Bootloader and then just says "Waiting for bootloader", when it gets to 90, I get the USB 171 or USB 170 error message.

i then have to remove the battery and power the phone up again. I've tried 4 times now with the exact same problem

any ideas?

Have you tried a different USB port, or a different computer? Try googling the USB 171 and USB 170 errors (quoting the exact error message).
Edit: in fact read the above post.
 
Last edited:

mrbubba999

Senior Member
Mar 28, 2010
1,801
200
Google Pixel C
Probably, but not necessarily. Try the other method and if you get access denied error (you'll understand when you see it) then you'll have to try the gold card one.



It isn't necessary, but as the radio deals with the signal stations which the phone connects to it is recommended to have the latest one for the best signal. To be honest I have crap signal on any of the radio's so it doesn't change much for me but each experience is different.



Have you tried a different USB port, or a different computer? Try googling the USB 171 and USB 170 errors (quoting the exact error message).
Edit: in fact read the above post.

Managed to fix it (see post above yours), its to do with the USB driver not working when in bootloader, but the work around resolved it.

Been running villain4beta2 all day, its good, but noticed a bit of slow down every now and again
 

avindal

Senior Member
Feb 23, 2010
111
18
Lund
Guide worked like a charm. Flashed DefianceCR_030710_213121_signed without any problems on my Hero, now running Android 2.1!
 

Rptynan

Member
Mar 31, 2010
20
0
28
Co. Laois
I managed to resolve, so if anyone is still having the problem, this is how to sort it.

Fastboot the Hero (press and hold the back button whilst powering on). Connect the phone to the USB cable and to the PC. Then go to device manager and select the HTC Hero in the list and update the driver. Choose the X64 drivers that are attached in the first post.
You should now be able to just run the RUU exe file and it should work....at least it did for me.

That was the longest part of the whole process, its taken me 3 hours to do and hopefully it will be worth it. My phone is just booting up with Villain4Beta2 (takes ages to boot up!!)

Thanks for that fix, really helped me out.:)

Btw, Great guide btdag, Thanks:D
 

Rptynan

Member
Mar 31, 2010
20
0
28
Co. Laois
Btw, I think you should add a reminder to run a nandroid backup, (maybe even make a guide for us newbs :rolleyes: )
I completely forget to and now I'm on VillainRom 5.02, what should I do in terms of a nandroid backup?:confused:
 

Zero00SM

Senior Member
Oct 22, 2009
58
0
Btw, I think you should add a reminder to run a nandroid backup, (maybe even make a guide for us newbs :rolleyes: )
I completely forget to and now I'm on VillainRom 5.02, what should I do in terms of a nandroid backup?:confused:

in the custom recovery you can find the nand backup option also +ext

EDIT: no dalvik i ment ext

to be more precise in RA-hero-v1.6.2 (same in 1.5.2) you can find it in Backup/Restore tab
 
Last edited:

cyst

Member
Aug 9, 2006
43
0
www.allmediascotland.com
I managed to resolve, so if anyone is still having the problem, this is how to sort it.

Fastboot the Hero (press and hold the back button whilst powering on). Connect the phone to the USB cable and to the PC. Then go to device manager and select the HTC Hero in the list and update the driver. Choose the X64 drivers that are attached in the first post.
You should now be able to just run the RUU exe file and it should work....at least it did for me.

cheers,
worked a charm for me!
 

Rptynan

Member
Mar 31, 2010
20
0
28
Co. Laois
in the custom recovery you can find the nand backup option also +ext

EDIT: no dalvik i ment ext

to be more precise in RA-hero-v1.6.2 (same in 1.5.2) you can find it in Backup/Restore tab

Thanks for that,:)

What is the ext partition anyway? I know it's a linux format for partitions but what does it do in android?
 

Detol Loki

Senior Member
Apr 6, 2010
81
0
Newcastle
Argh, I've bought 3 SD cards trying to root this crap and none of them have worked.

Scandisk, Kingston and some no name thing.

Fed up.
 

de_annere

Senior Member
Feb 13, 2010
55
2
Thank you very much for this great tutorial, I used the standard method on my unbranded HTC Hero (Location: Germany) and now it runs as if powered with fairy dust :D

Edit:
Did I say I use Legendroid now?
Also flashed the radio, used xxx.22, was recommended to me for better batterie-live. Did work on second try, end then it only needed a minute, but it told me to reboot three times!
 
Last edited:

trikko

Member
Apr 11, 2010
22
0
Nice guide... it works perfectly. You should complete this guide with a way to restore original shipped rom (i think it's easy... we just need to use an htc update, right?)

What about radio roms? What are they used for? How can I flash them? In this guide they are not mentioned...
 

spooke

Senior Member
Dec 1, 2009
290
37
Bedfordshire
Hey, I just got a HTC Hero, its running

Build number - 1.76.110.6

and the radio/baseband is

63.18.55.06U_6.35.04.25

I know its not the latest and my signal is perfectly fine,

So, I can use the normal method of doing the flashrec and installing the recovery, then I am perfectly able to install ANY rom I want including 2.1 ones?

So basicly once I have the recovery installed I'm good to go installing roms and my radio does not affect this, just the signal quality..

Thanks so much for ur reply's and guide! :cool:

PS. Can anyone recommend me the most featured 2.1 Sense rom that's out there, including Flash if possible :rolleyes:

I'm looking at Legendroid 1.0.1, NeORoM v2.1 Legend, Villain 4.0 Legend Beta2 or Villain 5.2 *If it is running legend build*

Edit- Ok, I flashed the recovery fine, works perfect and was a easy process, thanks for the guide,

Now to find a good 2.1 rom to stick with :D
 
Last edited:

btdag

Senior Member
Nov 25, 2009
828
19
Bournemouth
So, I can use the normal method of doing the flashrec and installing the recovery, then I am perfectly able to install ANY rom I want including 2.1 ones?

So basicly once I have the recovery installed I'm good to go installing roms and my radio does not affect this, just the signal quality..

PS. Can anyone recommend me the most featured 2.1 Sense rom that's out there, including Flash if possible :rolleyes:

I'm looking at Legendroid 1.0.1, NeORoM v2.1 Legend, Villain 4.0 Legend Beta2 or Villain 5.2 *If it is running legend build*

1. Yes I think you can use the normal method, worst that will happen is you'll get an error and you can decide whether to follow the longer gold card method

2. Every rom you install just wipe each time

3. My personal favourite is still Villain 3.4 but i'm now on 5.2 and its not bad. Legend isn't that great and the CDMA port isn't as fast as its said to be (as far as i'm concerned) but I would say the CDMA port has the greatest working feature set at this point (Villain 5.2)
 

spooke

Senior Member
Dec 1, 2009
290
37
Bedfordshire
1. Yes I think you can use the normal method, worst that will happen is you'll get an error and you can decide whether to follow the longer gold card method

2. Every rom you install just wipe each time

3. My personal favourite is still Villain 3.4 but i'm now on 5.2 and its not bad. Legend isn't that great and the CDMA port isn't as fast as its said to be (as far as i'm concerned) but I would say the CDMA port has the greatest working feature set at this point (Villain 5.2)

Hey, thanks for ur help, I went ahead and rooted it the normal way, I decided to try the Legendroid rom as I love the look of the new rosie, I will try villain 5.2 at a later date, :D, Thanks though!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 11
    This is aimed at new "rooters". The process is incredibly easy.

    I also take no responsibility if you mess up somehow, and this is for GSM Hero's NOT Sprint Hero CDMA users.

    In order to create this guide I downgraded my phone to RUU Orange UK 2.73.61.66 (i.e. unrooted) then updated to the pre-2.1 release from Orange and then updated to the final 2.1 release from Orange. I then used Universal Androot to gain root access and from there install a custom recovery.

    I have now also included a link to z4root as an alternative.

    Here is a link to my backup guide but please be aware that most of it requires root access.

    Prelude:
    Install HTC Sync from here
    Download Universal Androot
    Download z4root
    Download Root Checker - only if you need to
    Download AmonRA Recovery v1.7.0.1.img - easier if you rename this "recovery.img" when it is on your sdcard
    Place both downloaded files on your SD Card



    Root & Recovery

    1. Download and install Astro File Manager from the Market (or use any other file management program of your choice)

    2. Open Astro and find and install Universal Androot (or if that doesn't work try z4root) from your sdcard:
    Select UniversalAndroot.apk > Open App Manager > Install > Settings> [tick] Unknown Sources > OK > Back > Select UniversalAndroot.apk > Open App Manager > Install > Install > Open

    3. In the app and choose the correct version from the dropdown box:
    Superuser for Android 2.0~2.2 - if you have updated your phone recently
    Superuser for Android 1.5~1.6 - if you have refused updates recently or your country/provider hasn't released one yet
    Then choose: "Root :)"
    Wait until it says "Woot ! Your device is rooted !" and exit the program.

    4. Download and install Android Terminal Emulator from the Market (use Better Terminal instead if this one doesn't work)

    5. Run "Terminal Emulator". Type (press and hold menu to get the keyboard up) in the following:
    su (press enter and wait for the "Super User Request Prompt". Choose "Allow" and make sure its ticked to Allow every time.)
    flash_image recovery /sdcard/recovery.img (press enter - make sure this is typed exactly as seen)

    N.B. If you have issues here, see * notes below for more assistance

    6. Turn off your phone and press Home + Power to start it up again. This should boot into recovery mode.



    Install Your Custom Rom

    Note: This part of the guide can be repeated with as many different rom's as you like. You do not have to repeat the previous section once you have a recovery image installed.

    1. Download a Custom ROM from here to your computer.

    2. Make sure your phone is in recovery mode (Home + Power)
    Plug your phone into your computer and select "USB-MS toggle" in recovery
    Place the Custom ROM on your SD card in the main directory and press Home when it has finished copying over

    3. Select Backup/Restore > Nand backup > confirm with Home > Wait
    (or Nand + Ext if you have A2SD setup)

    4. Press back then select Wipe from the main menu, then select:
    Wipe data/factory reset > Home
    Wipe cache > Home
    Wipe Dalvik-cache > Home
    Wipe SD:ext partition > Home
    Press back button
    Select Flash Zip from SD Card
    Select the file
    Press Home to confirm

    Note: Ignore any "errors", they are normal and usually mean you're not using that feature.

    5. Once it is done, select Reboot and you will boot into the new Custom ROM.



    Updating your Radio

    Note: The radio deals with your signal levels and connectivity.

    1. Download the latest radio from the following page
    N.B. Radio's are not region specific! Just get the latest

    2. Mount your SD Card so your computer can read it and place the downloaded file in the main directory

    3. Turn off your phone and boot into the recovery screen (holding Home + Power)

    4. Choose:
    Flash Zip from SD Card
    Pick the radio.zip file and press Home to confirm
    Wait
    Your phone will reboot a couple of times but when you're back on the Recovery Screen just press reboot system now and it will complete the install and put you back into your custom rom.

    DO NOT PULL THE BATTERY OUT, THIS WILL BRICK YOUR HANDSET.

    5. When this process has completed reboot the phone and you should have the new radio. This can be checked in Settings > About Phone



    *Useful Information!!
    Tested this on 1.5 the other day, nice one BtDaG ;)

    For those of you having problems flashing the recovery, try entering this before the flash_image command:
    Code:
    rm /data/local/rights/mid.txt
    ln -s /dev/mtd/mtd1 /data/local/rights/mid.txt
    (btw, ROM Manager has an option to flash Amon_RA at the bottom ;) )

    ** Missing flash_image - confirmed to work by another user, please inform if different
    Download the flash_image.zip and unzip to your PC folder. Setup ADB. Place the recovery_image .zip in a folder called recovery on your computers C: drive. Then you will be able to run the following adb commands below from a cmd prompt on your computer:

    cd c:\recovery
    this will ensure you are in the correct folder
    adb root
    This will start ADB as root, or notify if it is already running as root.
    adb remount
    This will mount the system partition (/system) as writable, allowing the following
    adb push flash_image /system/bin
    This will send the flash_image script into the /system/bin, so we can use it from within the shell
    adb shell chmod 0755 /system/bin/flash_image
    Finally, change the permissions of the script to allow it to perform the desired action. Now that the script is installed, we are ready to proceed with flashing the custom recovery, saved on the root of the SD card earlier:
    adb shell flash_image recovery /sdcard/recovery.img
    this will install the the recovery - now continue the process where you left off
    *** solution 3
    A big thankyou to duck0 for identifying the problem and botoo for getting me to a happy conclusion with the correct commands

    SOLUTION IS HERE USING Console mode from windows using ADB USB DEBUGGING HAS TO BE ENABLED WITH HERO CONNECTED TO PC THEN TYPE THE FOLLOWING
    THEN ENTER AFTER EACH COMMAND
    anyone needing help setting up adb see this link http://xdaforums.com/showthread.php?t=757233

    adb shell

    su

    mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system

    rm /system/etc/install-recovery.sh
    Thats it all done next step



    INSTALL ROM MANAGER FROM MARKET IT IS FREE
    open it and sellect flash alternate recovery image from the bottom, you can use the clockwork recovery but it is not compattable with all roms.
    once done turn phone off, boot into recovery home + power choose to exit recovery with reboot shut down once again and if you can enter recovery then everything is sweet.


    Setup Apps2SD

    ONLY RECOMMENDED ON CLASS 4+ SD CARDS. Don't bother if you don't know what this is :). GIYF.

    Do this process after doing everything else! So make sure you have a working custom rom installed which supports Apps2SD. This is designed for VillainROM which doesn't use a swap, if your ROM does support swap ask for a recommended amount. Also note that the ext2 partition will be unreadable from windows or through android os.

    1. Backup your SD card to your computer (very important as this process will wipe all the data on it)

    2. Restart your phone into recovery mode (Home + Power)

    3. Select:
    Partition sdcard
    Partition SD
    Press Home
    Swap-size = 0 MB
    Ext2-size = 512 MB (recommended)
    FAT32-size = Remainder
    Press Home

    4. Once complete Reboot system now and wait! This can take 20 minutes or so to complete, so just keep waiting!

    DO NOT USE EXT3 or EXT4 partitions. They will just wear out your sd card quicker. They are designed for large files systems (i.e. 50GB+) with full operating systems running on them! The only benefit they bring is indexing (which on a 512MB partition is worthless). (Optional - before reboot) - Under partition sdcard you can convert the ext2 partition to ext3 - "SD:ext2 to ext3" - however this isn't recommended as it will wear out your sd card quicker. There is also often support for ext4 so you can do "SD:ext3 to ext4" after the first one too. Though again this will typically just wear out your SD faster without providing any speed benefits. See note above.



    Code:
    [B]OLD PROCESS BACKED UP JUST IN CASE. PLEASE DO NOT FOLLOW THIS SECTION OF THE GUIDE![/B]
    
    Largely based upon the Unlockr guides, so thank you Unlockr!
    
    Please do NOT be mislead. This is NOT a quick process, though the time has been reduced significantly if you don't need the goldcard method.
    There is no "one-click" version or "quick-install".
    
    You should set aside at least an hour for this process and preferably read through the process once before actually attempting it.
    
    
    [B]Please make a quick post with your experiences, including your brand of phone and location.
    Please check the FaQ first before asking questions :)[/B]
    
    
    [COLOR=DarkGreen][SIZE=3][U]Contents[/U][/SIZE][/COLOR]
    
    [COLOR=DarkRed]Pre: Backup[/COLOR]
    
    [COLOR=Navy]1. Installing a Recovery Image
    a. Installing the Correct HTC ROM
    2. Loading the Custom ROM
    3. Updating your Radio[/COLOR]
    
    [COLOR=DarkOliveGreen]Setup Apps2SD
    Check A2SD[/COLOR]
    
    [COLOR=DarkSlateBlue]"GoldCard" Test Procedure
    I. Setting up the drivers
    II. Create a “GoldCard” from a MicroSD Card
    III. Downgrade the Hero using the Goldcard[/COLOR]
    
    [COLOR=DarkGreen]FaQ[/COLOR]
    
    
    
    [COLOR=DarkRed][SIZE=3][U]Pre: Backup[/U][/SIZE]
    
    1. Backup contacts etc with HTC Sync.
    
    2. Backup your SD Card or use a spare
    
    3. Backup SMS Messages with SMS Backup & Recovery[/COLOR]
    
    
    
    [COLOR=Navy][SIZE=3][U]1. Installing a Recovery Image[/U][/SIZE]
    
    1. On your phone, go to Settings > Applications - and make sure "Unknown Source" is ticked.
    
    2. On your phone, go to Settings > SD card and phone storage - click Unmount SD card.
    
    3. Then click Format SD card.
    
    4. Plug the phone into the computer via USB, then pull down the notification bar and click on the SD card notification. Then click mount.
    
    5. Download this APK and recovery image and save it to your computer:
    
    [URL]http://zenthought.org/content/project/flashrec[/URL] - FlashRec.apk 
    [URL]http://xdaforums.com/showthread.php?t=561124[/URL] - Amon_Ra’s Hero Recovery Image 
    
    6. Copy them both to your SD card (do NOT put them inside any folders on the SD card, just put them on the SD card itself).
    
    7. Unplug the phone from the computer once they are downloaded to the SD card.
    
    8. Go to the Market and download ASTRO File Manager or any file manager program if you do not already have one.
    
    9. Open the file manager and find the FlashRec apk file and click it and choose open app manager and then install it.
    
    10. When it is installed click Open. Click on Backup Recovery Image and wait for it to finish. If you get "backup failed" response see the text on the right for more details, if the backup is a success carry on to step 11.
    
    [RIGHT][SIZE=1][U]a. Installing the correct HTC ROM[/U]
    
    Orange UK Users - Please downgrade your ROM version to [URL="http://www.htc.com/uk/SupportViewNews.aspx?dl_id=675&news_id=261"]2.73.61.5[/URL]
    
    Generic Hero Users - Please downgrade to [URL="http://x7.to/6jexri"]2.73.405.5[/URL], or follow the goldcard method if this doesn't work
    
    T-Mobile UK Users – Please follow the "Goldcard" method below
    
    All Other Users - Please follow the "Goldcard" method below[/SIZE][/RIGHT]
    
    11. Once done, click on the empty text box in the FlashRec program and type:
    
    /sdcard/recovery-RA-hero-v1.6.2.img
    (replace exact name as new versions come out)
    
    Then click on the Flash Recovery Image button and wait for it to finish.
    
    
    
    [SIZE=3][U]2. Loading the Custom ROM[/U][/SIZE]
    
    N.B. This part of the guide can be repeated with as many different rom's as you like. You do not have to repeat the previous sections once you have a recovery image installed.
    
    1. Download a Custom ROM from  [URL]http://xdaforums.com/forumdisplay.php?f=512[/URL]  to your computer.
    
    2. Plug in your phone and pull down the Notification bar when the SD notification pops up.
    
    3. Click on the notification and select Mount.
    
    4. Open the SD Card fonder on your computer.
    
    5. Copy the Custom ROM from your computer to your SD Card, do NOT change it, extract the files or put it in any folders
    
    6. Unplug your phone and turn it off.
    
    7. Turn the phone on by holding down Home and Power till you get to the custom recovery screen.
    
    8. Select Wipe from the menu, then select:
    
    Wipe data/factory Reset
    Wipe Dalvik-cache
    Wipe SD:ext partition
    Press back button
    Select Flash Zip from SD Card
    Select the file
    Click Confirm
    
    N.B. Ignore any "errors", they are normal and usually mean you're not using that feature.
    
    9. Once it is done, select Reboot and you will boot into the OS. Once you are loaded in make sure you format your SD card once more through the settings menu and then reboot the phone one last time. This will ensure you get the correct apps.[/COLOR]
    
    
    
    [COLOR=Navy][SIZE=3][U]III. Updating your Radio[/U][/SIZE]
    
    [B]N.B. People have been reporting problems with this part of the guide, try it at your own risk. It is not required to be on the latest radio when using a Custom ROM, however it is usually recommended! The radio deals with your signal levels, I found it to increase my signal from a maximum of 2 bars to full. It is likely to help if you travel, but if you are happy with your signal and tend to stay in the same place it may not be worth it.
    
    Be aware that if this doesn't work it can potentially brick you phone... though I've had no reports of that so far. Just people finding it doing different things after it flashes.[/B]
    
    1. Download the latest radio from the following site:
    At time of writing that is: [URL="http://www.villainrom.co.uk/radio/Radio_Signed_HERO_63.18.55.06PU_6.35.15.14.zip"]63.18.55.06PU_6.35.15.14[/URL]
    [B]N.B. Radio's are not region specific![/B]
    
    2. Mount your SD Card so your computer can read it and place the downloaded file in the main directory
    
    3. Turn off your phone and boot into the recovery screen (holding Home + Power)
    
    4. Choose:
    Flash Zip from SD Card
    Click Confirm
    Reboot system now when prompted
    
    N.B. This can take anywhere between 1 - 10 minutes or maybe even longer in some cases. Do not touch your phone until you either: get back to the recovery screen or your custom rom loads and you see the unlock screen.
    
    DO NOT PULL THE BATTERY OUT, THIS WILL BRICK YOUR HANDSET.
    
    5. When this process has completed reboot the phone and you should have the new radio. This can be checked in Settings > About Phone > Software Information > Baseband Version[/COLOR]
    
    
    
    [COLOR=DarkOliveGreen][U][SIZE=3]Check A2SD[/SIZE][/U]
    
    Please assume it is automatically working unless you can load applications without your SD card inserted. However, here is the process for those who are pedantic about these things. Many thanks to VillainROM Wiki for this process.
    
    1. Download check.zip from the bottom of this guide.
    
    2. Extract check.sh
    
    3. Download GScript Lite from the market
    
    4. Place check.sh on your SD card in a folder named gscript
    
    5. Open GScript and press:
    Menu
    Add Script
    Uncheck "needs su"
    Load File
    Select check.su
    Save
    
    6. Then click check from the main screen and you will get a readout of whether it is enabled or not.[/COLOR]
    
    
    [COLOR=DarkSlateBlue][SIZE=3][U][B]"GoldCard" Test Procedure[/B][/U][/SIZE]
    
    Please comment on whether this procedure works, it is untested. Thanks to [URL="http://www.villainrom.co.uk/viewtopic.php?f=46&t=1735"]ante0's guide[/URL] for some details used.
    
    [SIZE=3][U]I. Setting up drivers etc[/U][/SIZE]
    
    1. Download the latest HTC Sync from [URL="http://www.htc.com/www/SupportViewNews.aspx?dl_id=933&news_id=631"]here[/URL] and the latest SDK from [URL="http://developer.android.com/sdk/index.html"]here[/URL]
    
    2. Install HTC Sync & extract the Android SDK .zip file to C:\ (may help to re-name the folder to a shorter name, in this tutorial it will be C:\android\ )
    
    3. Click on your Windows Start menu and right click on "Computer" > Properties > Advanced System Settings > Environment Variables
    
    Find "Path" under "System Variables" and edit it. Add the following to the end of the text:
    ;C:\android\tools
    
    4. Restart your computer.
    On your phone, click Settings > Applications > Development and make sure USB Debugging is on.
    
    When back at your desktop plug then phone in and wait for it to install the correct drivers, this should be done automatically on the latest version of HTC Sync and adb should be enabled.
    
    5. Type the following into the command prompt window (Start > Search  > "cmd") and enter the following and press enter:
    
    adb devices
    
    You should see a serial number pop up and look like:
    000000000000    device
    It’s the serial number of your phone. This means the drivers are working in normal boot mode. Next we need to check them in fastboot mode (thanks to janhol for helping with this next part)
    
    6. Turn off your phone and load into fastboot by holding the Back button and pressing Power with the hero plugged into the computer
    
    7. "Start" > Right Click "Computer" > "Manage" > "Device Manager"
    
    8. Check that the "ADB Interface" reads "My Hero", not "Android bootloader drivers" or anything else.
    
    If it does then:
    Right click "Android bootloader drivers" > "Update Driver Software" > "Browse my computer..." > "Let me pick from..." > "Have Disk..." > "Browse" > "C:\Program Files (x86)\HTC\HTC Driver\Driver Files\Win7_x64" > "androidusb.inf"
    
    Once selected click "OK".
    
    "My HTC" should show in the list of "compatible hardware" now, so select that and click "Next" to install the driver. Switch off the phone (may have to pull the battery).
    
    
    [SIZE=3][U]II. Create a “GoldCard” from a MicroSD Card[/U][/SIZE]
    
    (Please keep in mind that some memory cards don’t work for this process)
    
    1. Put the memory card you want to use for the GoldCard into your phone, make sure all the data is backed up before proceeding as it will be formatted.
    
    2. With the memory card in your phone, and not connected to the PC, click on:
    Settings > SD and Phone storage > Unmount SD Card
    
    Once it unmounts, click Format SD Card.
    
    3. On your phone, click:
    
    Settings > Applications > Development and make sure USB Debugging is on.
    
    4. Return to the Command Prompt from earlier after re-plugging in your Hero. Then type the following with hitting enter at the end of each line:
    
    adb shell
    cat /sys/class/mmc_host/mmc1/mmc1:*/cid
    
    5. A code will display, write the code down into a notepad document or similar (MAKE SURE TO WRITE IT DOWN EXACTLY!)
    
    6. Go to this site:  [URL]http://hexrev.soaa.me/[/URL]  then put in your code you just wrote down into the text box and click submit. It will generate the code reversed and replace the first two digits with zeros automatically. Copy this.
    
    7. Then go to [URL]http://psas.revskills.de/?q=goldcard[/URL] and Paste your CID into the box and fill in the other details. You'll be e-mailed the goldcard. Save the goldcard image to disk.
    
    8. Now go to  [URL]http://download.cnet.com/HxD-Hex-Editor/3000-2352-10891068.html?part=dl-HxDHexEdi&subj=uo&tag=button[/URL]  to download the HxD Hex Editor. Install it to your computer.
    
    9. Mount your SD card on your phone so that it shows up on your computer as "Removable Disk" - Pull down the notification bar on the phone and select Mount CD Card.
    
    10. Open the Hex Editor (Run as Administrator if you're in Vista or Windows 7) and click on the Extra menu > Open Disk. Under "Physical Disk" select "Removable Disk". Make sure to UNcheck “Open as ReadOnly”. Click OK. 
    
    11. Go to the Extra menu again and click Open Disk Image. Open up the goldcard.img that you saved from your email. Press OK when prompted for Sector Size 512 (Hard Disks/Floppy Disks). You should now have two tabs, one is the SD card (Removable Disk) and the other is the goldcard.img. 
    
    12. Click on the Goldcard.img tab and press Ctrl + A (select all) Then Ctrl + C (copy).
    
    13. Click on the Removable Disk tab (Your SD Card) and select the complete lines from 00000000 to 00000170 then press Ctrl + V (paste).
    
    14. Click on File then click Save.
    
    15. Close the Hex Editor.
    
    16. Reboot the phone.
    
    Try to open the memory card on the computer (i.e. mount the drive), if it lets you, you are all set. If it asks/tells you to reformat the card, then try steps 13 – 19 again. If it gives you the same error again, then try a different memory card. You can confirm that it has worked by opening the Removable Disk in the hex editor again and making sure the code you pasted in has stayed but this shouldn't be necessary.
    
    
    
    [SIZE=3][U]III. Downgrade the Hero using the Goldcard[/U][/SIZE]
    
    1. With your phone plugged in, pull down the notification bar on the phone and select HTC Sync. Make sure it connects to HTC Sync on the computer (not sure if this is necessary anymore).
    
    2. Download this generic HTC Hero RUU
    
    Hero RUU - 
    [URL="http://x7.to/6jexri"]2.73.405.5[/URL]
    [URL="ftp://xda:xda@ftp.xda-developers.com/Hero/Official-ROMs/RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver.exe"]2.73.405.5[/URL] (alternative)
    
    3. Double click the RUU exe you downloaded while the phone is plugged in with the GoldCard in it and follow the on screen procedure. This will install the old generic Hero rom on your phone, this is to allow you to install a recovery image. Reboot and fill in as few details as possible as these will be overwritten soon.
    
    4. Now you have finished this procedure start from the beginning again.[/COLOR]
    
    
    
    Website: [URL]http://rootmydroid.co.uk/[/URL]
    
    Other Guides:
    [URL="http://xdaforums.com/showthread.php?t=669754"]How to Backup your Phone Between Wipes[/URL]
    
    
    
    Even older process - ignore
    [COLOR=DarkOrange][SIZE=3][U][B]Old "GoldCard" Procedure[/B][/U][/SIZE]
    [SIZE=3][U]I. Setting up the SDK[/U][/SIZE]
    
    1. Download the Latest Android SDK from Google
    
    Android SDK -  [URL]http://developer.android.com/sdk/index.html[/URL] 
    (currently - android-sdk_r06-windows.zip) but get the latest
    
    2. Extract the Android SDK .Zip file to C:\ (may help to re-name the folder to a shorter name, in this tutorial it will be C:\android\ )
    
    3. Run SDK Setup.exe
    
    4. Click "Settings" and check the "Force  [URL]https://.[/URL].. sources ..." option
    
    5. Click "Available Packages" and download the "USB Driver Package"
    
    6. On your phone, click Settings > Applications > Development and make sure USB Debugging is on.
    
    7. Plug your phone into your computer via USB cable.
    
    8. Go into device manager: Start --> Search for "device manager"
    
    9. Here we are checking the driver which is installed for your Hero, you may see either of the following scenarios:
    
    Other Devices > ADB
    or
    Android Phone > My HTC
    
    Either way you should do the following:
    Right Click > Update Driver > Browse > C:\android\usb_driver > Next and it should install "Android Composite ADB Interface"
    
    10. Type the following into the command prompt window (Start > Search  > "cmd") and enter the following hitting enter at the end of every line:
    
    cd c:\android\tools\
    adb devices
    
    You should see a serial number pop up, it’s the serial number of your phone. This means you are all set.
    
    If you do NOT see a serial number, then we need to reinstall the drivers.....
    end cut off due to size limits
    1
    Hi

    I have a Hero and am trying to upgrade the rom (from either villian 3.2 or 4 beta, sorry cannot remember which) for a second time. The problem I have is that I can only start the phone when a partitioned rom is present.

    This means that when I try and make a gold card the phone hangs whilst booting, yet when I take a partitioned card and copy the stuff in the hexi editor the phone says the card is faulty.

    How can I work around this please?

    I am finding it very frustrating as I did not have a problem last time as I was not troubled with partitioned cards

    Thanks

    You already have a Villain ROM installed, is that correct? So you should already have a custom recovery installed too?

    Turn off your phone, hold HOME + POWER to get onto the recovery console,... what writing does it have at the bottom? If its v 1. 6. 2 then your all set to go, if not, I'd update the recovery 1st. Follow BTDAG's guide in my signature for instructions.
    -------------------------------------
    Sent via the XDA Tapatalk App
    1
    This means that the recovery image didn't install properly. You have two options, start from 1. Installing a Recovery Image and try again (look out for error messages).

    Alternatively you could download "ROM Manager" from the market and install "ClockworkMod Recovery" using that. Though this may mean certain parts of the "2. Loading the Custom ROM" guide are slightly different.
    1
    Yes it is. See 1st post, REF | GUIDES in this thread
    1
    @Dark Emotion

    I'm pretty sure you just have to run the right .exe file on your PC:

    http://xdaforums.com/showthread.php?t=559622