[Q] hack sound or boost sound for s3mini?

Search This thread

Black_Armor

Member
Dec 9, 2012
27
7
Hi everyone, I'm looking for a method to make sound louder in ringtones, notifications, music, I tried several methods but none results.:crying:

I try hack mod

My phone haven't the file default_gain.conf

only one result is a hack camera sound, editing volume.db

I try with volume+ and speaker boost none results..

if anyone knows some method, please can you post it


sorry by my english

my s3mini firmware is I8190XXALL2 I8190OXXALL1 rooted by avicohh

Thanks avicohh :good:
 

leather.face

Senior Member
Dec 9, 2012
1,672
1,987
>>> Gera <<<
Hi, I have activate in my rom this mod:

XxXPachaXxX Sony Exclusive Pack! | BRAVIA-xLoud | PlayStation Cert WORKING!

This works very good and I've noticed so far no bugs. If demand for explanations, links exist then please write again.

Thanks and sorry for my bad english ... :) Then I have enabled init.d support for Stock rom & stock (secure) kernel.


Greeting,

leather.face (formerly Prototyp1981)
 
Last edited:
  • Like
Reactions: Black_Armor

Black_Armor

Member
Dec 9, 2012
27
7
Hi, I have activate in my rom this mod:

XxXPachaXxX Sony Exclusive Pack! | BRAVIA-xLoud | PlayStation Cert WORKING!

This works very good and I've noticed so far no bugs. If demand for explanations, links exist then please write again.

Thanks and sorry for my bad english ... :) Then I have enabled init.d support for Stock rom & stock (secure) kernel.


Greeting,

leather.face (formerly Prototyp1981)

Thanks leather.face, please can you post the installation instructions for s3mini :fingers-crossed:
 

leather.face

Senior Member
Dec 9, 2012
1,672
1,987
>>> Gera <<<
Install Instruction for the " xLoud and bravia engine "

Thanks leather.face, please can you post the installation instructions for s3mini :fingers-crossed:

Hi, yes I can send the installation instructions but today it is nothing more, tomorrow (sometime) ... I post only the install instruction for the xLoud & Bravia Engine without the batchscript for init.d support. I send Faria the batchscript and he will included the init.d files in his next rom update.

Greeting

Edit: I post in the next 2 hours the instruction with files (zip).


Edit 2:


" Install Instruction "

Sorry I can not posting outside links in their messages ... For screenshots in permissions please send me a PM and when I have more 10 posts then I can posting outside links. Thanks for your understanding!

xLoud & Bravia Engine by XxXPachaXxX

Search in google for this zip " XxXPachaXxX_Sony_ICS_pack.zip " and extract this zip on your micro sd-card. Then start a root file manager and open/edit your build.prop in the system folder with a text editor and add these lines for xLoud & Bravia Engine:

Code:
#Xloud Engine Service
nro.semc.sound_effects_enabled=true
nro.semc.xloud.supported=true
npersist.service.xloud.enable=1
#
#Bravia Engine Service
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1

" build.prop before leaving store " and delete the build.prop.bak. The permission for the build.prop is r-w-r-r . Then copy and paste all files in the specified folder. Permissions must be set manually!

The folder playcert in the XxXPachaXxX_Sony_ICS_pack.zip is unimportant for the xLoud & Bravia Engine Hack.

Once these steps are completed perform a reboot and it should work :). Should questions arise, I will help very much further and I hope I could help with this mod.

I send all my credits for this mod to " XxXPachaXxX " !


Optional - more build.prop tweaks - incrase performance, scroll speed and more. Open/edit your build.prop in the system folder with a text editor and add these lines:

Code:
#Optimizations
persist.adb.notify=0
persist.sys.purgeable_assets=1
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=v=n,o=v
persist.sys.purgeable_assets=1
#
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
#
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
#
#PowerSaver Tweaks
debug.sf.hw=1
pm.sleep_mode=1
usb_wakeup=enable
proximity_incall=enable
power_supply.wakeup=enable
ro.config.hw_power_saving=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
persist.sys.use_dithering=0
#
# Signal Tweaks
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
persist.cust.tel.eons=1
#
#Support for ipv4 and ipv6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
#
#Enable Dual Transfer Mode
ro.ril.enable.dtm=1
#
#Net Tweaks
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.tcp.buffersize.default=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.wifi=262144,524288,1048576,262144,524288,1048576
net.tcp.buffersize.lte=262144,524288,3145728,262144,524288,3145728
net.tcp.buffersize.hsdpa=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.evdo_b=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.umts=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.hspa=6144,87380,262144,6144,16384,262144
net.tcp.buffersize.gprs=6144,8760,11680,6144,8760,11680
net.tcp.buffersize.edge=6144,26280,35040,6144,16384,35040
#
#Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
#
#Increase overall touch responsiveness
windowsmgr.max_events_per_sec=90
debug.performance.tuning=1
video.accelerate.hw=1
#
#Faster Scrolling
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
#
#Touch tunning
touch.presure.scale=0.001
#
#For sensor sleep control
ro.ril.sensor.sleep.control=1
#
#Improve overall media quality
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
#
#Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25

" build.prop before leaving store " and delete the build.prop.bak. The permission for the build.prop is r-w-r-r . Reboot your phone.


Greeting and I wish all users a nice saturday! :)

leather.face (Prototyp1981)

PS: Everything should be working then I would appreciate a thank you on the button. :angel:
 
Last edited:

leather.face

Senior Member
Dec 9, 2012
1,672
1,987
>>> Gera <<<
Volume+ by Meltus

Sent from Spaceball One.


Hi, sorry for my noob question but who is Meltus?

Regards

---------- Post added at 03:18 PM ---------- Previous post was at 03:16 PM ----------

Thanks leather.face, works well.. :highfive:

Sorry for the delay, I had a lot of work


Hi, thanks for your statement and in the future I modfied more but I must see what is the result of my work. I wish a nice day.

Regards leather. :)
 

blackknightavalon

Senior Member
Feb 1, 2009
3,216
534
Somewhere in NYC
Hi, sorry for my noob question but who is Meltus?

Regards

---------- Post added at 03:18 PM ---------- Previous post was at 03:16 PM ----------




Hi, thanks for your statement and in the future I modfied more but I must see what is the result of my work. I wish a nice day.

Regards leather. :)

"Meltus" is one of the Android hackers from WAY back when the HTC Dream was still the brand-new iPhone killer who came up with the original volume hacks.
 

Maverix.25

Member
Feb 23, 2013
41
20
Jakarta
anybody can help me?

Hi, yes I can send the installation instructions but today it is nothing more, tomorrow (sometime) ... I post only the install instruction for the xLoud & Bravia Engine without the batchscript for init.d support. I send Faria the batchscript and he will included the init.d files in his next rom update.

Greeting

Edit: I post in the next 2 hours the instruction with files (zip).


Edit 2:


" Install Instruction "

Sorry I can not posting outside links in their messages ... For screenshots in permissions please send me a PM and when I have more 10 posts then I can posting outside links. Thanks for your understanding!

xLoud & Bravia Engine by XxXPachaXxX

Search in google for this zip " XxXPachaXxX_Sony_ICS_pack.zip " and extract this zip on your micro sd-card. Then start a root file manager and open/edit your build.prop in the system folder with a text editor and add these lines for xLoud & Bravia Engine:

Code:
#Xloud Engine Service
nro.semc.sound_effects_enabled=true
nro.semc.xloud.supported=true
npersist.service.xloud.enable=1
#
#Bravia Engine Service
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1

" build.prop before leaving store " and delete the build.prop.bak. The permission for the build.prop is r-w-r-r . Then copy and paste all files in the specified folder. Permissions must be set manually!

The folder playcert in the XxXPachaXxX_Sony_ICS_pack.zip is unimportant for the xLoud & Bravia Engine Hack.

Once these steps are completed perform a reboot and it should work :). Should questions arise, I will help very much further and I hope I could help with this mod.

I send all my credits for this mod to " XxXPachaXxX " !


Optional - more build.prop tweaks - incrase performance, scroll speed and more. Open/edit your build.prop in the system folder with a text editor and add these lines:

Code:
#Optimizations
persist.adb.notify=0
persist.sys.purgeable_assets=1
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=v=n,o=v
persist.sys.purgeable_assets=1
#
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
#
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
#
#PowerSaver Tweaks
debug.sf.hw=1
pm.sleep_mode=1
usb_wakeup=enable
proximity_incall=enable
power_supply.wakeup=enable
ro.config.hw_power_saving=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
persist.sys.use_dithering=0
#
# Signal Tweaks
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
persist.cust.tel.eons=1
#
#Support for ipv4 and ipv6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
#
#Enable Dual Transfer Mode
ro.ril.enable.dtm=1
#
#Net Tweaks
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.tcp.buffersize.default=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.wifi=262144,524288,1048576,262144,524288,1048576
net.tcp.buffersize.lte=262144,524288,3145728,262144,524288,3145728
net.tcp.buffersize.hsdpa=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.evdo_b=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.umts=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.hspa=6144,87380,262144,6144,16384,262144
net.tcp.buffersize.gprs=6144,8760,11680,6144,8760,11680
net.tcp.buffersize.edge=6144,26280,35040,6144,16384,35040
#
#Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
#
#Increase overall touch responsiveness
windowsmgr.max_events_per_sec=90
debug.performance.tuning=1
video.accelerate.hw=1
#
#Faster Scrolling
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
#
#Touch tunning
touch.presure.scale=0.001
#
#For sensor sleep control
ro.ril.sensor.sleep.control=1
#
#Improve overall media quality
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
#
#Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25

" build.prop before leaving store " and delete the build.prop.bak. The permission for the build.prop is r-w-r-r . Reboot your phone.


Greeting and I wish all users a nice saturday! :)

leather.face (Prototyp1981)

PS: Everything should be working then I would appreciate a thank you on the button. :angel:

'Then copy and paste all files in the specified folder' >> where to locate all files inside .zip? i cant found META-INF folder in my device... where is the folder should be?

sorry for the stupid questions because i'm a noob in android. i'm confuse, hoping someone answer me... thanks in advance
 

nonobio

Senior Member
Jun 27, 2013
103
5
Hi,
I lives in france and so i have a volume limit inbuilt on my S3 mini GT-I8190 due to the european law.
I found a tuto for the S3 (at mobilenewspedia) and try to apply it to the S3 mini but i didn't found the default_gain.conf file.
Is your mod a way to disable the european limit ?

Thanks
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Install Instruction for the " xLoud and bravia engine "

    Thanks leather.face, please can you post the installation instructions for s3mini :fingers-crossed:

    Hi, yes I can send the installation instructions but today it is nothing more, tomorrow (sometime) ... I post only the install instruction for the xLoud & Bravia Engine without the batchscript for init.d support. I send Faria the batchscript and he will included the init.d files in his next rom update.

    Greeting

    Edit: I post in the next 2 hours the instruction with files (zip).


    Edit 2:


    " Install Instruction "

    Sorry I can not posting outside links in their messages ... For screenshots in permissions please send me a PM and when I have more 10 posts then I can posting outside links. Thanks for your understanding!

    xLoud & Bravia Engine by XxXPachaXxX

    Search in google for this zip " XxXPachaXxX_Sony_ICS_pack.zip " and extract this zip on your micro sd-card. Then start a root file manager and open/edit your build.prop in the system folder with a text editor and add these lines for xLoud & Bravia Engine:

    Code:
    #Xloud Engine Service
    nro.semc.sound_effects_enabled=true
    nro.semc.xloud.supported=true
    npersist.service.xloud.enable=1
    #
    #Bravia Engine Service
    ro.service.swiqi.supported=true
    persist.service.swiqi.enable=1

    " build.prop before leaving store " and delete the build.prop.bak. The permission for the build.prop is r-w-r-r . Then copy and paste all files in the specified folder. Permissions must be set manually!

    The folder playcert in the XxXPachaXxX_Sony_ICS_pack.zip is unimportant for the xLoud & Bravia Engine Hack.

    Once these steps are completed perform a reboot and it should work :). Should questions arise, I will help very much further and I hope I could help with this mod.

    I send all my credits for this mod to " XxXPachaXxX " !


    Optional - more build.prop tweaks - incrase performance, scroll speed and more. Open/edit your build.prop in the system folder with a text editor and add these lines:

    Code:
    #Optimizations
    persist.adb.notify=0
    persist.sys.purgeable_assets=1
    dalvik.vm.verify-bytecode=false
    dalvik.vm.dexopt-flags=v=n,o=v
    persist.sys.purgeable_assets=1
    #
    #Disable Kernel Error Checking
    ro.kernel.android.checkjni=0
    ro.kernel.checkjni=0
    #
    # Disables data sent and logging
    ro.config.nocheckin=1
    profiler.force_disable_err_rpt=1
    profiler.force_disable_ulog=1
    #
    #PowerSaver Tweaks
    debug.sf.hw=1
    pm.sleep_mode=1
    usb_wakeup=enable
    proximity_incall=enable
    power_supply.wakeup=enable
    ro.config.hw_power_saving=1
    ro.config.hw_fast_dormancy=1
    ro.config.hw_quickpoweron=true
    persist.sys.use_dithering=0
    #
    # Signal Tweaks
    ro.ril.hsxpa=1
    ro.ril.gprsclass=10
    ro.ril.hsdpa.category=8
    ro.ril.hsupa.category=6
    persist.cust.tel.eons=1
    #
    #Support for ipv4 and ipv6
    persist.telephony.support.ipv6=1
    persist.telephony.support.ipv4=1
    #
    #Enable Dual Transfer Mode
    ro.ril.enable.dtm=1
    #
    #Net Tweaks
    net.dns1=8.8.8.8
    net.dns2=8.8.4.4
    net.tcp.buffersize.default=6144,87380,110208,6144,16384,110208
    net.tcp.buffersize.wifi=262144,524288,1048576,262144,524288,1048576
    net.tcp.buffersize.lte=262144,524288,3145728,262144,524288,3145728
    net.tcp.buffersize.hsdpa=6144,262144,1048576,6144,262144,1048576
    net.tcp.buffersize.evdo_b=6144,262144,1048576,6144,262144,1048576
    net.tcp.buffersize.umts=6144,87380,110208,6144,16384,110208
    net.tcp.buffersize.hspa=6144,87380,262144,6144,16384,262144
    net.tcp.buffersize.gprs=6144,8760,11680,6144,8760,11680
    net.tcp.buffersize.edge=6144,26280,35040,6144,16384,35040
    #
    #Raise JPG quality to 100%
    ro.media.enc.jpeg.quality=100
    #
    #Increase overall touch responsiveness
    windowsmgr.max_events_per_sec=90
    debug.performance.tuning=1
    video.accelerate.hw=1
    #
    #Faster Scrolling
    ro.max.fling_velocity=12000
    ro.min.fling_velocity=8000
    #
    #Touch tunning
    touch.presure.scale=0.001
    #
    #For sensor sleep control
    ro.ril.sensor.sleep.control=1
    #
    #Improve overall media quality
    ro.media.enc.jpeg.quality=100
    ro.media.dec.jpeg.memcap=8000000
    ro.media.enc.hprof.vid.bps=8000000
    #
    #Dialing Tweaks
    ro.telephony.call_ring.delay=0
    ro.lge.proximity.delay=25
    mot.proximity.delay=25

    " build.prop before leaving store " and delete the build.prop.bak. The permission for the build.prop is r-w-r-r . Reboot your phone.


    Greeting and I wish all users a nice saturday! :)

    leather.face (Prototyp1981)

    PS: Everything should be working then I would appreciate a thank you on the button. :angel:
    1
    Hi, I have activate in my rom this mod:

    XxXPachaXxX Sony Exclusive Pack! | BRAVIA-xLoud | PlayStation Cert WORKING!

    This works very good and I've noticed so far no bugs. If demand for explanations, links exist then please write again.

    Thanks and sorry for my bad english ... :) Then I have enabled init.d support for Stock rom & stock (secure) kernel.


    Greeting,

    leather.face (formerly Prototyp1981)
    1
    Works fine Big THX

    Gesendet von meinem GT-I8190 mit Tapatalk
    1
    Thanks leather.face, works well.. :highfive:

    Sorry for the delay, I had a lot of work
    1
    Thanks for comfirming!

    Did you noticed significant gains?

    Thanks!

    Sent from my GT-I8190 using xda app-developers app

    Not "significant," but noticeable.