[Kernel]Atrix-GB/CM7/9[2.6.32.59/56/59](026/024/026)OC~1.45GHz/UV/SLQB/ZRAM[Jun-17]

Search This thread
By:
Advanced…
ricardowec

ricardowec

Senior Member
Jul 7, 2011
1,941
577
Galapagos Islands, ECUADOR
www.ricardowagner.com
Sorry to say, I ve been using Faux for a while (with Alien) and for the first time I have started to get random reboots wit 0.1.7. So I am going back to 0.1.6 . Same happened when I gave a try to The Dark Side and updated to 0.1.7. I thought it was the Rom but now I realize it's 0.1.7, plus the GPS goes wild with both Roms. I've been very proud of the stability of my setup .. Too bad
 
W

wintermute000

Senior Member
Jul 13, 2010
1,607
172
dcarpenter85 said:
Had to flash back to the stock kernel..just wasn't very impressed with the battery life of this kernel. After flashing back I immediately noticed an improvement in battery life. I should also add that I don't overclock at all.
Click to expand...
Click to collapse

Me too :( Been giving it a go since 1.2 and always find that I love the speed, CIFs support etc. but battery life is substantially worse. Given that stock isn't exactly a slouch, I go with battery life.

However mind you I've only ever tried this kernel with redpill and alien, coudl be to do with the way the kernel and ROM interacts, who knows.
 
E

earthdan

Member
Jul 13, 2008
47
4
guidoido004 said:
I think you mean outdated, right?

Sent from my MB860 using XDA App
Click to expand...
Click to collapse

So are you saying that it is incorrectly displaying the number of cores because it is an older program? I would really like to confirm wether or not my atrix is using both cores. Could you suggest another program that could do this? It wouldn't even have to be a benchmark program, it could just show CPU info.

Cheers
 
Auxilium

Auxilium

Senior Member
Aug 5, 2011
1,017
46
Key West, FL
earthdan said:
So are you saying that it is incorrectly displaying the number of cores because it is an older program? I would really like to confirm wether or not my atrix is using both cores. Could you suggest another program that could do this? It wouldn't even have to be a benchmark program, it could just show CPU info.

Cheers
Click to expand...
Click to collapse

I downloaded Quadrant Standard, opened it went to system information and it says Cores: 1, ran the full benchmark, submitted scores, went back to system information and it updated cores to 2.

Give that a try.
 
E

earthdan

Member
Jul 13, 2008
47
4
Auxilium said:
I downloaded Quadrant Standard, opened it went to system information and it says Cores: 1, ran the full benchmark, submitted scores, went back to system information and it updated cores to 2.

Give that a try.
Click to expand...
Click to collapse

I just tried that but it still says only 1 core.......strange

I'm currently using the gobstopper rom with the ATT radio 1.77.30 and faux 123's 0.1.7 kernel.

Could the rom or radio cause this?
 
E

earthdan

Member
Jul 13, 2008
47
4
Auxilium said:
Not sure, I've never used GobStopper, I'm running Alien v4 with AT&T, the same radio and kernel.
Click to expand...
Click to collapse

I know there are other places for benchmarks, but what is your quadrant score anyways? I am getting around 3300 with this current setup (average of 3 runs from 3000,3400,3500). If our scores are similar this would probably mean that the same number of cores would be used right? (guessing here tho).
 
K

kaedeyip

Member
Mar 11, 2008
20
1
Dear faux123, would you please help to create a overclock kernel for Hong Kong rom. Due to HK device cannot flash AT&T rom through RSD; So i can't flash your ATT OC kernel.
 
Auxilium

Auxilium

Senior Member
Aug 5, 2011
1,017
46
Key West, FL
earthdan said:
I know there are other places for benchmarks, but what is your quadrant score anyways? I am getting around 3300 with this current setup (average of 3 runs from 3000,3400,3500). If our scores are similar this would probably mean that the same number of cores would be used right? (guessing here tho).
Click to expand...
Click to collapse

My quadrant score from a couple tests I've run are 3600+, getting higher every time I ran it.

I also switched over to Aura from Alien.
 
T

TheToiletSpaula

Senior Member
Mar 12, 2011
107
6
Auxilium said:
I downloaded Quadrant Standard, opened it went to system information and it says Cores: 1, ran the full benchmark, submitted scores, went back to system information and it updated cores to 2.

Give that a try.
Click to expand...
Click to collapse

Hmm weird. My quadrant standard states that I have 2 cores and i haven't flashed any new kernel. I am on the .30P radio with faux's stock 4.5.91 Rom. I was thinking of either going through with flashing this or eternity projects kernel after flashing a new Rom, perhaps alien v4.

Sent from my MB860 using XDA App
 
K

kaedeyip

Member
Mar 11, 2008
20
1
Thx faux123, I will try the "INTL mbr_1100 original Kernel Version" Btw, may I know the different between INTL mbr_d00 & INTL mbr_1100?
 
Phalanx7621

Phalanx7621

Senior Member
Jul 17, 2011
5,017
2,277
Delaware
OnePlus 8 Pro
Google Pixel 5a
kaedeyip said:
Thx faux123, I will try the "INTL mbr_1100 original Kernel Version" Btw, may I know the different between INTL mbr_d00 & INTL mbr_1100?
Click to expand...
Click to collapse
If I'm not mistaken it has to do with the version of tegra processor. But I could be wrong on that, never looked into it. Also I found out the problem when downloading Faux123's stock Kernel ---the Multiupload is broken and stops at 93%, all other download links on that page work fine to my knowledge.
 
A

ali.almahdi

Member
Dec 27, 2010
33
21
I have been facing Phone FCs using v0.1.6 and v0.1.7.. No issues at all using v0.1.3.. Running ORFR eval's system.img.

Flashed eval's ORFR radio... Same issue..
 
E

earthdan

Member
Jul 13, 2008
47
4
Auxilium said:
My quadrant score from a couple tests I've run are 3600+, getting higher every time I ran it.

I also switched over to Aura from Alien.
Click to expand...
Click to collapse

Thanks for testing that, appreciate the help.

It must just be incorrectly reporting the cores since I too seem to be getting around the same score and increasing as i go up.

cheers,
Dan
 
J

jucapolito

Member
Nov 22, 2007
9
1
Swiftks said:
Flash back to stock kernel before flashing Alien ROM, then after you have that installed, come back here and flash this kernel. I believe stock kernels are listed in the OP of this thread as well (at least I know the US AT&T one is). If you haven't flashed a different kernel yet, then you are still on stock kernel.
Click to expand...
Click to collapse

Thanks Swiftks!

I'll try that as soon as I have some time... but I still have doubts ..

the picrust rom i've flashed has faux .6 kernel embedded ... if I only flash the .7 is it ok? Is it ok to flash alien#4 rom on top of my current? Here is what works or not:

- Battery lasts less than 10 hours with setcpu + profiles (little usage, most time idle )

- keyboard seems misaligned with touch

- swipe is buggy and doesn't work

- webtop works

- wifi, gps,3g working

- phone is super hot

My phone is from brazil, d00.

Any or advice is really welcome.

Thanks









Sent from my MB860 using XDA Premium App
 
You must log in or register to reply here.

Similar threads

mmontuori
[KERNEL] [3.1.10] Olympus (Atrix 4G) Kernel Project
Replies
2K
Views
1M
P
palmbeach05
Notorious544d
[CM7] Neutrino ROM V2.9 ¦ V3.00b1 [24/02]
Replies
10K
Views
2M
J
jman316
epinter
[ROM] CM10 (JellyBean) for Atrix
Replies
6K
Views
2M
D
DuyguSeli
t0dbld
  • Locked
* Official CM7 for Atrix Stable only (No Nightly )* Atrix CM Ba2tF RELEASED!!
Replies
4K
Views
1M
_Alex_
_Alex_
epinter
[ROM] CM 10.1(Android 4.2) for Atrix
Replies
4K
Views
1M
W
williamfrench

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 346
    faux123
    faux123
    Here's an official build of a kernel based on Motorola Atrix source code for ATT
    (Overclock via PimpMyCPU or SetCPU)

    Just a statement regarding kernel source: The Kernel Source is of course covered under GPL version 2. Free software does NOT mean no work or time was spent working on it. I have donated a large sum of my free time to hack this kernel. If you use my modified kernel source in its entirety, I kindly ask you to send me a github pull request or PM whenever you find bugs or think you can help improve my kernel hack further. This way the entire community will truly benefit from the spirit of open source. Thank you :cool:

    ​


    Compatible with: Rooted Stock, Debloated Stock ROMs and CM7 ROMs (Pick the correct version from below) :D Enjoy!

    I have patched in BFQ I/O scheduler and SLQB memory allocator for better I/O and memory performance.

    THIS IS ONLY FOR THOSE WHO ARE WILLING to LOAD THIS KERNEL ON THEIR OWN PHONES... IF YOU ARE NOT COMFORTABLE WITH THIS YOU SHOULD NOT FLASH THIS.




    [ FROYO Kernel 2.6.32.9 ]

    [<{ ATT OLYFR_U4_1.8.3 (Official ATT ONLY) }>]

    [ Original Stock Kernel ]
    The CWM File ==> ATT original Kernel Version <==

    [ Overclock Kernel, Max @ 1.1 GHz ]
    The CWM File ==> ATT FR Kernel Version 0.1.0n <==

    [ GINGERBREAD (2.3.4/5/6) Kernel 2.6.32.59]

    [<{ OLYGB_U4_5.9.1 (ATT, INTL Unified) }>]

    [ Original Stock Kernel ]
    The CWM File ==> ATT original Kernel Version <==
    The CWM File ==> INTL mbr_d00 original Kernel Version <==
    The CWM File ==> INTL mbr_1100 original Kernel Version <==

    [ Overclock Kernel, Max @ 1.45 GHz version ]

    The CWM File ==> Unified GB Kernel Version 026 @ 1.45 GHz <==
    md5sum ==> <==

    [ Overclock Kernel, Max @ 1.3 GHz ]

    The CWM File ==> Unified GB Kernel Version 026 @ 1.3 GHz <==
    md5sum ==> <==

    [ Enhanced Stock Kernel, Max @ 1.0 GHz ]

    The CWM File ==> Unified GB Kernel Version 026 @ 1.0 GHz <==
    md5sum ==> <==

    [ CYANOGENMOD 7 Kernel 2.6.32.56 ]

    [<{ CyanogenMod 7 (ATT, INTL Unified) }>]

    [ Original Stock Kernel ]
    The CWM File ==> cyanogenmod kernel <==

    [ Overclock Kernel, Max @ 1.45 GHz ]

    The CWM File ==> Unified CM7 Kernel Version 024_r2 @ 1.45 GHz <==
    md5sum ==> <==

    [ Overclock Kernel, Max @ 1.3 GHz ]

    The CWM File ==> Unified CM7 Kernel Version 024_r2 @ 1.3 GHz <==
    md5sum ==> <==

    [ Enhanced Stock Kernel, Max @ 1.0 GHz ]

    The CWM File ==> Unified CM7 Kernel Version 024_r2 @ 1.0 GHz <==
    md5sum ==> <==

    [ CYANOGENMOD 7 Kernel 2.6.32.56 ]

    [<{ CyanogenMod 9 (ATT, INTL Unified) }>]

    [ Original Stock Kernel ]
    The CWM File ==> cyanogenmod kernel <==

    [ Overclock Kernel, Max @ 1.45 GHz ]

    The CWM File ==> Unified CM9 Kernel Version 026 beta 1 @ 1.45 GHz <==
    md5sum ==> <==

    [ Overclock Kernel, Max @ 1.3 GHz ]

    The CWM File ==> Unified CM9 Kernel Version 026 beta 1 @ 1.3 GHz <==
    md5sum ==> <==

    [ Enhanced Stock Kernel, Max @ 1.0 GHz ]

    The CWM File ==> Unified CM9 Kernel Version 026 beta 1 @ 1.0 GHz <==
    md5sum ==> <==

    [ Installation procedure: ]

    [ CWM Method ]
    1. reboot to CWM
    2. Clear cache
    3. install zip from SDcard
    4. Reboot

    DONE!

    [ Bulletin: ]

    Version 0.2.3 is OUT!

    CIFS+UTF-8... check out CIFS Manager from fellow XDA Developer :D


    [ Bugs: ]

    [<{ ATT OLYFR_U4_1.8.3 }>]
    None So far....

    [<{ ATT OLYGB_U4_5.9.1 }>]
    None So far....

    [<{ CyanogenMod }>]
    webtop issues

    [ Change History: ]

    See 2nd Post!


    Standard Disclaimer: Not responsible for bricking your phone, voiding your warranty, or any other pain or suffering you may feel as result of using this ROM or Kernel!!!


    My github in Compliance with GPL :D
    View
    69
    faux123
    faux123
    [ History: ]

    Version 0.0.1 (deprecated)

    Added FakeShmoo OC/UV
    Compiled with Tegra2 specific VFP optimizations, Tegra2 specific optimizations :D
    Added BFQ I/O Scheduler
    Added SLQB memory allocator
    Added EXT4 support (NOT ENABLED YET) :D
    Added CIFS + UTF-8 support :D (for windows shares)
    Added TUN/TAP support directly
    Added FUSE (file system in user space)
    Added AVP overclock (system bus)
    Merged WiFi Module into kernel source tree

    Version 0.0.2 (deprecated)

    Compiled with 1.5.7 config

    Version 0.0.3 (deprecated)

    Reduced CPU Freq/Voltage table from 7 to 6 slots
    Adjusted CPU Freq/Voltage table

    Version 0.0.4 (deprecated)

    Updated Freq Table to allow for 1.2 GHz OC
    Updated WiFi module compilation flags

    Version 0.0.5 (deprecated)

    Revert "Updated Freq Table to allow for 1.2 GHz OC"

    Version 0.0.6 (deprecated)

    Re-base on MT870's 2.3.4 Kernel Hack (Credit to edgan for point this out!)
    Preserved all previous patches except WiFi (No WiFi module included!)

    Version 0.0.7 (deprecated)

    Fixed a patch error... Oops... (DOH!)

    Version 0.0.8 (deprecated)

    Revert back to SLUB from SLQB

    Version 0.1.0n (Long Term Stable Release, FR)

    [{< OLYFR_U4_1.8.3 >}] (ATT)
    Based on latest ATT source OLYFR_U4_1.8.3
    Enabled SLQB again
    Working WiFi Moudle (Finally)
    Overclocking Works! (Finally, use SetCPU latest version)

    Version 0.1.1_r2 (deprecated)

    Based on latest MT8710 source for China Market
    Re-Introducing EXT4 File system :D
    (the file system is formatted as EXT3, but mounted as EXT4. 100% BACKWARDS COMPATIBLE with EXT3)
    Overclock option for 1.2 GHz, but system only allows up to 1.1 GHz for now :rolleyes:
    init.rc optimization ;)

    Version 0.1.2 (deprecated, GB)

    Cleaned up FakeShmoo Overclocking code in general for future updates
    Overclocked 3D engine (350 MHz)
    Overclocked SDRAM from 300MHz to 333MHz
    Overclocked AVP further (280 MHz)
    Enabled Undervolting Support in SetCPU to allow for User Undervolt

    Version 0.1.3 (deprecated, GB)

    Based on Official Motorola U4_5.91 Source Code Release

    Version 0.1.4 (deprecated, CM7)

    Based on Official Motorola U4_5.91 Source Code Release
    Patched to Linux Kernel 2.6.32.39

    Version 0.1.6 (deprecated, GB/CM)

    Boot time command line ATAG fix up for all tegra parts. (Thanks to Eval- for patching this ;) )

    Version 0.1.7 (deprecated, GB/CM7)

    Fixed minor code error in overclocking

    Version 0.1.8 (deprecated, GB/CM7)

    Introducing 1.3 GHz Overclock :androidwink:
    ARM optimized spinlock
    THUMP-EE enabled

    Version 0.1.9 (deprecated, GB/CM7)

    Tweaked voltage table for better 1.3 GHz stability

    Version 0.2.0 (deprecated, GB/CM7)

    Added AVP processor suspend (this will greatly improve battery life)
    Added Fixes from the new Photon 4G source code
    Added ARM SWP/SWPB instructions back
    Added Several Power management patches
    Added CPU sibling code for setting cpu policies for 2nd CPU
    Added JHash3
    Added 1.0 GHz stock clock
    Added RCU optimization

    Version 0.2.1 (deprecated, GB/CM7)

    Optimized memcpy and memmove
    Optimized CRC32 and CRC32c
    Updated Binder to latest AOSP version
    Updated Low Memory Killer to latest AOSP version
    Increased OC to 1.45 GHz stable :D

    Version 0.2.2 (deprecated, GB/CM7)

    cpufreq: fix cpu freq issues
    block: limit default readahead size for small devices
    PM / Suspend: Fix bug in suspend statistics update
    mm/vmalloc.c: eliminate extra loop in pcpu_get_vm_areas error path
    lockdep: print lock name for lockdep_init_error
    init/main.c: execute lockdep_init as early as possible
    [PATCH] Input: introduce device properties
    [PATCH] input: mt: Add hovering distance axis
    input: mt: Break out slots handling
    Input: introduce MT event slots
    USB: f_mass_storage: Disable write cache support
    kernel:sched: LOAD_FREQ (4*HZ+61) avoids loadavg Moire
    sched: don't call task_group() many times in set_task_rq()
    compilation: clean up most warning messages during compile
    PM: wakelocks: Don't report wake up wakelock if suspend aborted
    aes1750: Suspend fingerprint sensor earlier
    rtc alarm: fix bad index when canceling alarms[]
    kernel patch: 2.6.32.47 -> 2.6.32.48
    mmc:core: revert to pre-2.6.32.40 mmc driver
    irq: fix build error due to missing irq_pm_syscore_resume
    kernel patch: 2.6.32.9 -> 2.6.32.47
    ARM: support XZ compressed kernels
    decompressors: add boot-time XZ support
    decompressors: add XZ decompressor module
    arm: Allow CPU-supported unaligned accesses
    PM: wakelocks: Display wakelocks preventing suspend by default
    mmc: core: put eMMC in sleep (cmd5) mode before suspend
    staging:lowmemkiller add Fudgeswap
    Staging:zram: Specify default disksize via menuconfig (in bytes)
    zram: Set initial disksize to some default value
    zram: Simplify zram disk resizing interface
    zram: Kernel config option for number of devices
    Staging:ZRAM: Make default zram allocation configurable via menuconfig
    zram: Fix sparse warnings
    swap: Add swap slot free callback to block_device_operations
    Add zram driver


    Version 0.2.3 (Short Term Release, GB/CM7)

    The CWM File ==> Unified GB Kernel Version 023 @ 1.45 GHz <==
    The CWM File ==> Unified GB Kernel Version 023 @ 1.3 GHz <==
    The CWM File ==> Unified GB Kernel Version 023 @ 1.0 GHz <==
    The CWM File ==> Unified CM7 Kernel Version 023 @ 1.45 GHz <==
    The CWM File ==> Unified CM7 Kernel Version 023 @ 1.3 GHz <==
    The CWM File ==> Unified CM7 Kernel Version 023 @ 1.0 GHz <==

    Fixed Various Gaming issues including Plants Vs Zombies
    Fixed Webtop issues (GB version only!)
    kernel.h: Add BUILD_BUG() macro.
    hugetlb: Replace BUG() with BUILD_BUG() for dummy definitions.
    ARM: Add optimised swahb32() byteswap helper for v6 and above
    sched/rt: code cleanup, remove a redundant function call
    PM / Sleep: Unify diagnostic messages from device suspend/resume
    PM / Sleep: Drop pm_op() and pm_noirq_op()
    mm: retry page fault when blocking on disk transfer
    kernel patch: 2.6.32.48 -> 2.6.32.49
    kernel patch: 2.6.32.49 -> 2.6.32.50
    overclock: fix freq table derpage at nvrm_clocks_limits.c
    PM / Sleep: fixed coding derp from "Drop pm_op() and pm_noirq_op()"

    Version 024 (Current, GB/CM7)

    switched to fast NoHz tree RCU
    Completely rebuilt from scratch based on ATT 4591 baseline
    Both Stock and Cyanogen now share the same baseline code base
    Patched to latest kernel.org 2.6.32.56
    Fixed some warnings during compilation
    enabled NETFILTER_XT_MATCH_MAC (for wifi tethering app users)
    arm/vfp: vfp_pm_suspend: Use local variable instead of rereading from register
    ARM: vfp: clear fpscr length and stride bits on entry to sig handler
    ARM: vfp: move user vfp state save/restore code out of signal.c
    ARM: vfp: flush thread hwstate before restoring context from sigframe
    crc32: Don't reference unnecessary crc32 tables in single-bit mode
    ARM: proc-v7.S: remove HARVARD_CACHE preprocessor guards
    ARM: net: JIT compiler for packet filters enabled by default
    ARM: net: JIT compiler for packet filters
    include/filter.h: add missing rcu_types.h for kernel usage
    ARM: hwcaps: add new HWCAP defines for ARMv7-A
    ARM: hwcaps: use shifts instead of hardcoded constants
    mmc: fix deadlock from mmc core when suspend the device
    mmc: change mmc_delay() to use usleep_range()
    nohz: Remove ts->inidle checks before restarting the tick

    Version 026 (Current, GB/CM9)

    Incorporated kernel code fix up from Epsylon3
    Incorporated kernel code fix up from LGE's v21y kernel source drop
    Updated to mainline 2.6.32.59
    Incorporated few patches from Android Common
    Enabled Early Suspend/Late Resume driver for cpufreq to limit max screen off frequency
    -- While Screen is OFF
    ---- CPU is limited to 503MHz max and 2nd core taken offline.
    Enabled kernel version of memcpy instead of userspace copy (to use more efficient kernel memcpy routines)


    Standard Disclaimer: Not responsible for bricking your phone, voiding your warranty, or any other pain or suffering you may feel as result of using this ROM or Kernel!!!


    My github in Compliance with GPL :D
    View
    31
    faux123
    faux123
    Remember folks, hit them [Thanks] button if you enjoyed my efforts! ;) :cool:
    View
    30
    faux123
    faux123
    Reserved 2... maybe
    View
    25
    faux123
    faux123
    quick status update:

    I have recently patched the kernel to the latest kernel.org version 2.6.32.48 and added a number of patches and enhancements to it. The next weekly CM update should have all the things I just mentioned.

    I am re-writing the OC completely from scratch. This will probably miss the next weekly update window. The current OC scheme has some flaws:

    1. Unable to control max speed with SetCPU or other OC apps
    2. Webtop will always use MAX freq regardless
    3. No built-in thermal protection (esp for users of 1.45 GHz version)

    I am trying to address ALL of the above in 1 gigantic re-write, but lately I've been dealing with personal life as well and so it has been slow... I should have some time this weekend starting tonight. I will try to squeeze as much in as possible this weekend and hopefully have something workable when the weekend is finished.
    View

New posts