problem is with 13,14 channels! maybe also 12
if router transmit at this channels, then we cant connect.
i need to tune wifi driver to allow such channels.
stop posting. about wifi, i have no more time reading same posts all day.
[Kernel 3.12.rc6][24 OCT][DEV THREAD!] Dorimanx 8.43 ONLY JB I9100 +RECOVERY+ROOTED.
- Status
problem is with 13,14 channels! maybe also 12
if router transmit at this channels, then we cant connect.
i need to tune wifi driver to allow such channels.
stop posting. about wifi, i have no more time reading same posts all day.
well it apprently based on my experience i really feel a slight battery drain with s2w and based for other users that i read...but again i repeat slight
oh 9999?i think i will have s7 in that day haha
Yeah I'm noob in this field but there must be something activated what is still on standby and waiting for the slide - apparently that is using battery.
Anyway I have to sent application to Dori about turn it off by default in battery profile
Crescendo Xenomorph
Senior Member
Me too, did the normal kernel only flashing, reset ET, restore ET, and voila no problem. Using Cisco AP @ dual channel but connected at 5Ghz. Region set to Japan. :good:
And battery life is soooo CRAZY! I played 3D game for nearly 1 hour with only 13% drop?
The only problem is my own problem about memory and slowdown. Its my fault, I disabled the taskman in favor of System Tuner Pro. But sometimes I forgot to check the free RAM till all laggy, solved by kill-all.
No memleaks whatsoever. :highfive:
FYI, my channel is 6, it works from office but does not from home. Where as 5.86 works fine.
Sorry about the rant of wifi
, that's fine I can live with current setup. Thank you.
Crescendo Xenomorph
Senior Member
Use SEARCH! And READ the OP! I already reported all the trolls here who posting the same obvious repetitive questions to mods.
---------- Post added at 11:48 PM ---------- Previous post was at 11:44 PM ----------
Can't you just read the OP if you got time TROLLING here?! Why are you so lazy?!
---------- Post added at 11:52 PM ---------- Previous post was at 11:48 PM ----------
FYI, my channel is 6, it works from office but does not from home. Where as 5.86 works fine.
Sorry about the rant of wifi
Maybe you could try to re-set your router? Change the region or update the router's firmware?
I got same problem before, but with my laptop. Solved by updating my router's firmware. Try it...
As an aside, it occurs to me that a widget to toggle the Cortex AutoWifi would be a boon (think streaming radio). Anyone know if such a thing exists or has been requested?
Sent from my GT-I9100 using xda premium
Sent from my GT-I9100 using xda premium
dori...
your latest mali kernel 7.1 runs much smoother on bajee's android 4.1.2 RootBOX 2.9
i love the performance, and smoothness of this combination,
no issues so far even wifi works,
really really impressed for this kernel, :thumbup::thumbup::thumbup:
thanks.. love it...
i want to touch and scroll my phone all the time, hahaha, i am addicted to the smoothness, animation, responsiveness,
thanks dori...
Sent from my SimpleSoft themed Galaxy S2 using Tapatalk 2
your latest mali kernel 7.1 runs much smoother on bajee's android 4.1.2 RootBOX 2.9
i love the performance, and smoothness of this combination,
no issues so far even wifi works,
really really impressed for this kernel, :thumbup::thumbup::thumbup:
thanks.. love it...
i want to touch and scroll my phone all the time, hahaha, i am addicted to the smoothness, animation, responsiveness,
thanks dori...
Sent from my SimpleSoft themed Galaxy S2 using Tapatalk 2
Last edited:
For all those having wifi problems it may be just a case of factory resetting your router. I have had many problems with loss of wifi on various channels and configurations following flashing Dori and RR zip files. I would lose connectivity on all wireless devices in my house.
It was a case of resetting the router and starting again. Sometimes we just have to be a bit more proactive instead of ranting and posting the same old posts.
Dori, the devs and mods do a great job so cut them some slack and accept there are going to be a few teething problems. Without them we would be using stock kernels and roms.
Sent from my GT-I9100 using xda app-developers app
It was a case of resetting the router and starting again. Sometimes we just have to be a bit more proactive instead of ranting and posting the same old posts.
Dori, the devs and mods do a great job so cut them some slack and accept there are going to be a few teething problems. Without them we would be using stock kernels and roms.
Sent from my GT-I9100 using xda app-developers app
and kernel is 5.XX ?
if yes, then it's should work.
problem is with 7.X JB-MALI
P.S
Good new i have traced back 700 commits and found the USB tether broken CODE!
now it's working...
i will try to remove broken commits from source and see if 5.87 / 7.1 will work
UPDATE!
USB tether BUG EXTERMINATED
on both kernels
BUG found 21 pages back!
https://github.com/dorimanx/Dorimanx-SG2-I9100-Kernel/commits/master-jelly-bean?page=21
Last edited:
Some one have problemi with deep sleep governor? Becouse if i put a different governor from wake up governor i have black screen when i try to wake up kernel 7.1. Rom jellybam
Inviato dal mio GT-I9100 con Tapatalk 2
Inviato dal mio GT-I9100 con Tapatalk 2
Flashed the last version over the latest cm10 nightly and got black screen after logotype of sgs2. No boot. Tried other cm10 rom, 4.1.2, the same black screen, what is wrong?
Sent from my GT-I9100 using Tapatalk 2
Sent from my GT-I9100 using Tapatalk 2
Just installed RootBox 2.9+Dori 7.1 too and great combo so far. All working ok, Wifi is perfect here (was ok too with PA 2.18)dori...
your latest mali kernel 7.1 runs much smoother on bajee's android 4.1.2 RootBOX 2.9
i love the performance, and smoothness of this combination,
no issues so far even wifi works,
really really impressed for this kernel, :thumbup::thumbup::thumbup:
thanks.. love it...
i want to touch and scroll my phone all the time, hahaha, i am addicted to the smoothness, animation, responsiveness,
thanks dori...
Sent from my SimpleSoft themed Galaxy S2 using Tapatalk 2
Installed RootBox 2.9 (AOKP JellyBean 4.1.2) with Dorimanx 7.1
Doing well so far
Edit: Also got the new Nova Launcher Beta which is based in 4.1.2 too
So I take it the full wipe recommendation worked out for you
PHONE : SGSII
Sent via: Tapatalk 2
Main ROM: RB JB Mali 2.9 (ONLINE)
2nd Rom: RR ics 2.7-hibernation
KERNEL : Dorimanx 7.1 Mali
MODEM : LPS
ROOT APP : SuperSu 0.96
Long time since i used to use "battery" preset in cwm, but it lose the smoothness and finding the right setup via extweaks made me headache so i stick with default + UV, but my battery drains a lot faster, duh.
In 7.0 + PA2.18 i'm curious about new mali jb driver, so i tried "battery" preset available in extweaks with -50mV cpu uv, vga 62/100/160/200 800/850/900/950mV, no s2w, no bln; I was surprised with the results, now i get a decent battery life + no slow down, very smooth performance. Also i uninstalled my task manager, no lag/temporal freeze/slow down too like before!!! 4 thumbs up to DORI!!! :thumbup::thumbup::thumbup::thumbup:
Sent from Paranoid Nokia 3310 4G/LTE® with iRoundCorner™
In 7.0 + PA2.18 i'm curious about new mali jb driver, so i tried "battery" preset available in extweaks with -50mV cpu uv, vga 62/100/160/200 800/850/900/950mV, no s2w, no bln; I was surprised with the results, now i get a decent battery life + no slow down, very smooth performance. Also i uninstalled my task manager, no lag/temporal freeze/slow down too like before!!! 4 thumbs up to DORI!!! :thumbup::thumbup::thumbup::thumbup:
Sent from Paranoid Nokia 3310 4G/LTE® with iRoundCorner™
Using Cm10 latest nightly with dorimanx kernel 7.1!
Settings extreme proformance!
Everything is very smooth!
Battery not so bad either!
1 problem, don't know if it's the rom or the kernel!
WIFI is very bad! It keeps disconnecting! And when I play a video on YouTube, it keeps stop buffering, even with downloads I download!
Anybody got a idea what it is?
Maybe a wrong settings in extweak? The ROM?
The Kernel?
Thx
Sent from my GT-I9100 using xda premium
Settings extreme proformance!
Everything is very smooth!
Battery not so bad either!
1 problem, don't know if it's the rom or the kernel!
WIFI is very bad! It keeps disconnecting! And when I play a video on YouTube, it keeps stop buffering, even with downloads I download!
Anybody got a idea what it is?
Maybe a wrong settings in extweak? The ROM?
The Kernel?
Thx
Sent from my GT-I9100 using xda premium
This are discussed on the previous pages, the last that @dorimanx says:
I recently switched from Siyah to Droimanx. Since i've used Siyah I had no problems with battery life and AOKP build 3/4. After installing AOKP BDay edition and flashing Dorimanx B3/B4/7.1 battery life is worse than stock kernel.
With Syiah I was able to get like 3-3.5 hours of screentime, on Dorimanx I loose about 1% in 7-10 minutes of browsing texting.
Kernel/ROM was installed after a full wipe (except sdcard).
Extweaks settings are by my opinion very balanced:
Any ideas?
With Syiah I was able to get like 3-3.5 hours of screentime, on Dorimanx I loose about 1% in 7-10 minutes of browsing texting.
Kernel/ROM was installed after a full wipe (except sdcard).
Extweaks settings are by my opinion very balanced:
Code:
secondcore=hotplug
cpustepcount=15
scaling_max_freq=1200000
scaling_min_freq=100000
smooth_level0=8
scaling_governor=pegasusq
load_l1=41
load_h0=60
min_rq=2
load_rq=20
rate=100
freq_min=800000
GENTLE_FAIR_SLEEPERS=on
ARCH_POWER=on
cpu_undervolting=-50
enable_mask=3
sched_mc_power_savings=2
busfreq_up_threshold=23
scaling_max_suspend_freq=600000
scaling_min_suspend_freq=100000
deep_sleep=pegasusq
standby_freq=100000
mali_touch_boost_level=1
GPUFREQ1=50
GPUFREQ2=100
GPUFREQ3=160
GPUFREQ4=267
GPUVOLT1=800
GPUVOLT2=800
GPUVOLT3=800
GPUVOLT4=900
GPUTHRESHOLD1UP=70
GPUTHRESHOLD2DOWN=50
GPUTHRESHOLD2UP=85
GPUTHRESHOLD3DOWN=50
GPUTHRESHOLD3UP=90
GPUTHRESHOLD4DOWN=70
mov_hysti=3
min_bl=30
min_gamma=0
max_gamma=24
power_reduce=on
user_mode=on
user_cb=130
user_cr=133
user_gamma_adjust=0
pwm_val=75
tsp_touch_freq=300000
tsp_slide2wake=off
mdnie_shortcut_enabled=off
negative_tweak=1
TOUCHSCREEN1=50
TOUCHSCREEN2=40
TOUCHSCREEN3=12
TOUCHSCREEN4=53
TOUCHSCREEN5=38
TOUCHSCREEN6=44
soundgasm_hp=2
sound_volume1=0
sound_volume2=0
sound_volume3=0
gesture_tweak=off
enabled=off
bln_switch=2
enabled_charging=off
notification_timeout=300000
bln_reset_notification=0
bln_charging_notification=0
bln_check_battery=6
led_timeout=2
tsp_flash_timeout=on
led_fadeout=on
touchkey_brightness=2850
logger=off
adb_mode=0
bootmenu_enabled=1
supplicant_scan_interval=360
zramtweaks=4
gpsregion=Europe
scheduler=cfq
usb_mode=default
default_stats=off
chargecurrent=2
install_root=on
cortexbrain_background_process=1
cortexbrain_auto_tweak_brightness=off
cortexbrain_auto_tweak_wifi=off
android_logger=disabled
cortexbrain_firewall=off
cortexbrain_tcp=on
cortexbrain_cpu=on
cortexbrain_memory=on
cortexbrain_battery=on
cortexbrain_extra_battery=on
cortexbrain_system=on
cortexbrain_kernel_tweaks=on
cortexbrain_io=onAny ideas?
should i use it with dorimanx kernel?
http://xdaforums.com/showthread.php?t=1908269
7 minutes per 1% is 11.6 hours of screen time
http://xdaforums.com/showthread.php?t=1908269
I recently switched from Siyah to Droimanx. Since i've used Siyah I had no problems with battery life and AOKP build 3/4. After installing AOKP BDay edition and flashing Dorimanx B3/B4/7.1 battery life is worse than stock kernel.
With Syiah I was able to get like 3-3.5 hours of screentime, on Dorimanx I loose about 1% in 7-10 minutes of browsing texting.
Kernel/ROM was installed after a full wipe (except sdcard).
Extweaks settings are by my opinion very balanced:
Code:secondcore=hotplug cpustepcount=15 scaling_max_freq=1200000 scaling_min_freq=100000 smooth_level0=8 scaling_governor=pegasusq load_l1=41 load_h0=60 min_rq=2 load_rq=20 rate=100 freq_min=800000 GENTLE_FAIR_SLEEPERS=on ARCH_POWER=on cpu_undervolting=-50 enable_mask=3 sched_mc_power_savings=2 busfreq_up_threshold=23 scaling_max_suspend_freq=600000 scaling_min_suspend_freq=100000 deep_sleep=pegasusq standby_freq=100000 mali_touch_boost_level=1 GPUFREQ1=50 GPUFREQ2=100 GPUFREQ3=160 GPUFREQ4=267 GPUVOLT1=800 GPUVOLT2=800 GPUVOLT3=800 GPUVOLT4=900 GPUTHRESHOLD1UP=70 GPUTHRESHOLD2DOWN=50 GPUTHRESHOLD2UP=85 GPUTHRESHOLD3DOWN=50 GPUTHRESHOLD3UP=90 GPUTHRESHOLD4DOWN=70 mov_hysti=3 min_bl=30 min_gamma=0 max_gamma=24 power_reduce=on user_mode=on user_cb=130 user_cr=133 user_gamma_adjust=0 pwm_val=75 tsp_touch_freq=300000 tsp_slide2wake=off mdnie_shortcut_enabled=off negative_tweak=1 TOUCHSCREEN1=50 TOUCHSCREEN2=40 TOUCHSCREEN3=12 TOUCHSCREEN4=53 TOUCHSCREEN5=38 TOUCHSCREEN6=44 soundgasm_hp=2 sound_volume1=0 sound_volume2=0 sound_volume3=0 gesture_tweak=off enabled=off bln_switch=2 enabled_charging=off notification_timeout=300000 bln_reset_notification=0 bln_charging_notification=0 bln_check_battery=6 led_timeout=2 tsp_flash_timeout=on led_fadeout=on touchkey_brightness=2850 logger=off adb_mode=0 bootmenu_enabled=1 supplicant_scan_interval=360 zramtweaks=4 gpsregion=Europe scheduler=cfq usb_mode=default default_stats=off chargecurrent=2 install_root=on cortexbrain_background_process=1 cortexbrain_auto_tweak_brightness=off cortexbrain_auto_tweak_wifi=off android_logger=disabled cortexbrain_firewall=off cortexbrain_tcp=on cortexbrain_cpu=on cortexbrain_memory=on cortexbrain_battery=on cortexbrain_extra_battery=on cortexbrain_system=on cortexbrain_kernel_tweaks=on cortexbrain_io=on
Any ideas?
7 minutes per 1% is 11.6 hours of screen time
Last edited:
- Status
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
975
Dorimanx Kernel for SGII-I9100
Supporting 5 ROM Platforms!
My kernel was based on SiyahKernel 4.0 long time ago in other realty,
Kernel Tree is 3.12.rc6-R101, + Samsung JB updates + my tweaks and lots of tuning!
Thank you Gokhanmoral for your great work in the past!
Warning!!!
Do not install this kernel on any Android version lower than 4.1.Y
Do a Nandroid Backup of your ROM before first try it! just in case
Constant OC will drain more battery! use low speeds on screen off! min 200/100 max 800
CPU will shutdown in case of over-volt or under-volt so be careful
I'm no responsible for any hardware damage or system corruption that can happen after using this kernel,
you are using this kernel from your own will and accept any responsibility by using it.
If you install this kernel your warranty will be void!
Of course you can be relaxed, I'm trying every release on my phone several hours before of release it so,
if something wrong, i will get the damage first, you get a tested and tuned working kernel...
« Thread rules
« Which kind of posts are allowed in this thread?
- Report of bugs after test it personally and including the proper log (Please refer to the Voku's guide of How to report bugs for further information about logs.)
- Feedback that could genuinely helps to the development of the kernel, for example tests of a new feature including a complete explanation, documentation and results.
- Requests of new features for the next versions of the kernel with the proper explanation of why you expect to see it and why do you think that will be an improve to the kernel.
« Which kind of posts are not allowed here and belongs only to the discussion thread?
- Battery life related, which include: Discussion of battery life, statistics of your battery life, screenshots about your configuration, your configuration itself (with the intention of help another users)
- Reports of SOD if you undervolt / overclock your phone
- General discussion about settings of the kernel, which include: Governors, schedulers, I/O, dual-boot, etc.
- Requests of new features for the next versions of the kernel without the proper explanation of why you expect to see it and why you think that will be an improve to the kernel.
- Bug reports with the proper attachments like logcat and kernel log (This is the exception, you can post it here and in the development thread, again, only with the log attached, otherwise the report will be ignored), please refer to the voku's guide of How to report bugs for further information about logs.
- Deep sleep issues. Mostly of this issues are not kernel dependent, the rogue apps cause wakelocks and other weird behavior so, the first suggestion will be go to the BBS (Better Battery Stats) thread, install the app, and drop the log in there but as complement you can expose your issue here.
« Useful Links and Guides
Official Dorimanx's site
Facebook Fan Page
Kernel GIT Repository
INITRAMFS Repository (recovery)
Dorimanx change logs by kantjer
How to save battery by Voku
All you need to know about UV/OC by the professional chip designer Vikas [Very important to read]
[GUIDE] CPU Governors, TCP algorithms, Android Tips, & IO Schedulers: In my Own Words by MBQsniper
Kernel Governors, Modules, I/O Schedulers, CPU Tweaks, AIO App Configs by droidphile
How to make your own .TAR kernel file to flash with ODIN by dorimanx and a ready to use .TAR by kantjer
How to tune the touch screen if you need it by Crescendo Xenomorph
Kernel Gestures Builder by Flint2
SAMSUNG USB DRIVERS by Daerragh
[Tutorial] How To Logcat by paxChristos
Dorimanx kernel ICS/JB - Dummies Guide by ironass
- Kernel is updated to 3.12.Y and beyond.(hybrid)(we have 93% from 3.12.Y kernel!)
- Kernel SUPPORT JB 4.1.x/4.2.x/4.3.x
- This is JB Tuned Kernel only! not supporting any 2.x.x/4.0.x roms!
- Dual CPU support
- Default CPU governor: HYPER
- CFS CPU SCHEDULER Tweaks.
- Default CPU frequency: 200-1200 MHz (MAX OC up to 1.6Ghz speed!)
- Kernel Support STweaks and 5 Profiles.
- Overclocking to 1600 MHz. (via ANY CPU Tweak Apps or STweaks)
- Kernel support 16 CPU steps! 1600Mhz->100Mhz by static default!
- You can set MIN/MAX CPU Freq in STweaks app! + lots of CPU tweaks.
- Kernel will sleep in deep sleep on 200Mhz->800Mhz as Samsung requesting to prevent SOD.
- Support undervolt/overvolting via sysfs interface/apps interface. and STweaks (800-1500mV) (all set to best)
- Be very careful with voltage settings! (all set already)
- Default I/O Scheduling: BFQ
- More I/O Scheduling present in kernel: DEADLINE, VR, NOOP, FIFO, CFQ, SIO, ZEN, BFQ
- Native USB Tethering.
- Native Wi-Fi Tethering
- File systems support: Ext3/4, FAT32, CIFS, NTFS, EXFAT
- Added tweaks to increase I/O Speed.
- Added tweaks to increase CPU speed
- Removed all the debuggers to free kernel from unneeded jobs, and logs.
- More Govs present, HYPER, conservative, performance, pegasusq, nightmare, darkness, zzmoove, ondemand(default sleep gov), sleepy.
- ZRAM SWAP add more 150/300/600MB compressed RAM, activated by STweaks, set to off by default.
- Tweak camera (better picks quality)
- Kernel Include Siyah Recovery with Dual ROM support!
- In Recovery you have section to select kernel profile. Performance, default, battery, the default is DEFAULT.
- Kernel will Auto ROOT your device!
- You can disable ROOT in STweaks app!
- Tuned for I/O Mega Speed SQLite is injected to ROM after install.
- BLN by GM! lights time out, and blink/breathing effect, see STweaks BLN tab to activate! (READ ABOUT BLNWW!)
- New Kernel Management app STweaks by GM! installed with kernel.
- BLN without Wakelock to save battery when BLN active till timed out. by GM.
- Touch Keys Light change with the screen brightness! by GM.
- Massive script for kernel/ROM management made by Voku,Alucard and me
It's will work by auto and set lots of tweaks: NET tweaks, GPU tweaks, CPU management, Deep Sleep Tuning, Charging states, and more!
It's name is cortexbrain-tune.sh - WE SAFE (MMC_CAP_ERASE not present) in kernel MMC Code!
- MMC code merged with SAMMY Update 10 + 3.10.y updates!
- FM-RADIO WORKING! (you need Spirit FM PAID!!!!) or Sammy ROM with FM APP.
- Touch screen color + touch thresholds are in STweaks,
- Kernel Cleaning Script is build IN! by VOKU.
- BT Support for SAMMY 4.1.2 and all 4.2.X + 4.3.x
- Video(GPU) + Camera Driver from SAMMY JB/CM10.1 + patches
- WIFI Driver 1.61.56 ported from SG4
- Modem Driver from SAMMY JB SOURCE
- SMP Processor code updated from Kernel 3.12.Y
- RCU + SRCU Processor code updated from Kernel 3.12.Y
- Kernel Code for on screen gestures by Tungstwenty fixed by MARIO1968
- All FS used Code merged with 3.12.Y kernel
- SLUB fully merged with 3.12.Y Google Android kernel
- SCHED CORE fully merged with 3.12.Y kernel.
- RAM merged with 3.12.Y + Google Android kernel.
- VFP updated to MAX from 3.12.Y
- Slide2Wake by FLUXI, (swipe from left to right on turned off screen to wakeup device, tweak can be turned on/off in STweaks, this mod use 5% battery! (Modded by GM for less battery drain)
- Sound boost controls by FLUXI in STweaks.
- New Mali V2 Video Driver combined with old to support JB STOCK in one kernel(8.X branch) by Gokhanmoral/me/CM-TEAM!
- In 9.X branch we have MALIv2 ONLY video driver for CM/AOKP new ROMS! no STOCK SUPPORT!.
- Added mdnie interface and made hardcore’s sharpness tweaks optional by GM!
- 5 GPU FREQ Steps from 108Mhz to 520Mhz by GM!
- Ultra KSM from 3.9.y kernel.
- Powered by SuperSU "Please support SuperSU" dev Chainfire!
- Recovery can backup/restore STOCK ROM! include the preloaded partition!
NOTE: This kernel is for JB AOKP / CM10.1 / MIUI(STOCK JB BASE) / SAMSUNG STOCK JB ROMs
WARNING:
It's not possible to dual-boot with the JB SAMMY ROMs in any combination.
So, please! don't try it and don't report it as a bug, it's a known issue.
---------------------------------------------------------
Disclaimer:
Every user must use his / her own criteria to report the off-topic posts,
The rules are just a guide to what is expected to see in a development thread,
But if you don't want report posts at least don't answer the repeated questions,
This open the door to the spoon feeders to ask again and again and again...
Live Change Logs from GITHUB:
Initramfs
Kernel 8.x
Kernel 9.x
(To download kernel, go to links at bottom of >this page!< YES the OP PAGE!)
ICS is no longer supported!
for ICS ROMS use 5.x/7.x/8.1 only!
Discussion, Q&A Dorimanx Thread Go >HERE< For Help.
Change logs:
24/10/13 time 12:50
Kernels 8.43 + 9.43 <Stable>
Kernels 8.42 + 9.42 <Major BUG found and fixed in x.43>
Kernels 8.41 + 9.41 <Stable>
03/09/13 time 16:10
Kernels 8.40 + 9.40 < NEW BETA TEST! >
Kernels 8.39 + 9.39 <stable but with small bugs in ram count>
Added 4.3 support!
Kernels 8.38 + 9.38 <STABLE BUILD!>
15/08/13 time 04:00AM
NO 4.3 SUPPORT!
Kernels 8.37 + 9.37 <DELETED! BUGGED>
"Declared as 3.10.rc5 in X.36 build"
Kernels 8.36 + 9.36 <DELETED! BUGGED>
Kernels 8.35 + 9.35 <MASSIVE UPDATE! V2 Stable for most users>
Kernels 8.34 + 9.34 <MASSIVE UPDATE! Stable for most users>
Kernels 8.33 + 9.33 <Stable for most users! BUT do backups! to PC>
Kernels 8.32 + 9.32 <Considered stable by many, but still some got SODS(for some users). (bugs fixed)>
Kernels 8.31 + 9.31 < test V7, STABLE 90% but low vibrate and small bugs.>
Kernels 8.30 + 9.30 < test V6 STABLE 93%, OOM profiles still broken.>
Kernels 8.29 + 9.29 <new beta test V5, OOM FIXED! stable, but oom profiles broken.>
Kernels 8.28 + 9.28 <new beta test V4, half stable, 80% OK.>
Kernels 8.27 + 9.27 <STILL SODS, OOM Broken!>
Kernels 8.26 + 9.26 <STILL SODS, OOM Broken!>
Kernels 8.25 + 9.25 <DELETED, SYNC BUG>
27/05/13 time 02:50
Kernels 8.24 + 9.24 <Reported as 90% Stable release!>
Kernels 8.23 + 9.23 < DELETED SOD BUG>
Kernels 8.21 + 9.21 < DELETED SOD BUG>
kernels 8.20/9.20 < DELETED SOD BUG>
Kernels 8.19 + 9.19 < DELETED SOD BUG>
Kernels 8.18 + 9.18 < DELETED SOD BUG>
Kernels 8.17 + 9.17 < DELETED SOD BUG>
04/05/13 time 14:45
Kernels 8.16 + 9.16 <Reported as 95% Stable release!>
16/04/13 time 11:35
Kernels 8.14 + 9.14 <STABLE and WORKING OK!>
04/04/13 time 00:10
Kernels 8.13 + 9.13 <STABLE and WORKING OK!>
Kernels 8.12 + 9.12 <STABLE, but with WIFI BUG!>
23/03/13 time 23:40
Kernels 8.11 + 9.11
Kernels 8.10 + 9.10
Kernels 8.4/9.2 -> 8.9/9.9 DELETED! <MEM SOD BUG>
Kernels 8.3 + 9.1
Kernel 8.2 + 9.0
Kernel 8.1 <LAST ICS SUPPORTING KERNEL>
Old History:
Goals for next builds:
- Debug and find more code errors! (always something new)
- Add cool features and tweaks
- Extend battery life.
- Boost performance.
« Installation
- Download the file
- Place it on your SD card
- Reboot into recovery
- Flash the file
- Reboot
In case of a new installation on a non rooted or non recovery device:
You can Download ODIN 3.04 attached to page.
- Reboot to Download mode (Hold Power + Home + Vol down, then vol up when you see the download menu)
- Connect USB, wait until the drivers be installed
- Install kernel via ODIN, choosing the option PDA, search for the file that you downloaded and push start
- If all going fine the phone will reboot and you done
Mirror #1 by Bmbm
Mirror #2 by Willflint
Mirror #1 Here
Mirror #2 Here
Dev-Host mirror (just in case that main mirror be overloaded)
Alternative mirror provided by Looki75
> Server in standby, no content <
« Credits
- Gokhanmoral (Siyah Kernel)
- Myfluxi (xxICSKernel)
- Pinpong (Thoravukk_i9100)
- Voku1987(This Kernel)
- Alucard_24(This Kernel)
- STANTRC(This Kernel)
- Halaszk (siyahkernel-sgs3)
- AndreiLux(Perseus-S3 Kernel)
- Teamhacksungb (CM Kernel)
- Pershoot (Galaxy-2636)
- Dror2169 (KernelSanders-OMAP)
- Faux123 (Great Mega Elite Dev, many kernels)
- Simone201 (Neak-ICS kernel)
- Angelom (Abyss kernel)
- DerTeufel (Samsung kernel - Aries)
- Entropy512 (CyanogenMod)
- Talustus ( Dream Kernel - ICS)
- Tungstwenty (On screen gestures addon)
- Renaudallard (GNexus kernel)
- Torvalds (Kernel 3.6.Y maintainer)
- Robertobsc (Siyah kernel 3)
Please treat him as full time developer for this kernel, any of his answers are considered as if i have answered.
Thanks a lot for your help and support!
Third Kernel developer Alucard_24 GIT
Please treat him as full time developer for this kernel, respect his answers as he know much and helping in development!
Thanks a lot for your help and support!
Forth Kernel developer StanTRC GIT
Please treat him as full time developer for this kernel, respect his answers as he know much and helping in development!
Thanks a lot for your help and support!
Great Fearless Beta Test Team!
- Eskriminal
- Rkoby13
- Infatality
- Shahan_mik3
- Computoncio
- Metalgearhathaway
- PSyCh¤_O_O
- Crazy-Silver
- Cybernetus
- Bogdan1980
- Markox89
- Stopro
- Misk77
The most active and honored team members are:
- Voku1987 ★
- Alucard_24 ★
- StanTRC ★
- THE RED BLUR ★
- Manulemaboul ★
- GaboWinter ★
- Johnbeetee
- Xanthrax
- Cybernetus
- Big_bum
- Rkoby13
- Unexist6969
- Bologna
- Kantjer
- Crazy-Silver
- Sybregunne
- #illidan
- It_ler
- Flint2
- Wonsky21
- Zeppelinrox
- Fhasovic
- Lyndonguti
- Nasty_z
- Krishnadusad
- Crescendo Xenomorph
- Jgcaap
- Bleuxeon
TO DONATE CLICK HERE
Donators:
- Donation from a XDA Guests x36
- Bmbm (Huge donation! Great Main Mirror!)
- Willflint(Huge donation! Great Second Mirror!)
- Bleuxeon x5
- Sun90 X3
- Rkoby13 X3
- THE RED BLUR x2
- Xanthrax x2
- Kantjer x2
- Flint2 x2
- PigMachine x2
- Nuclear******* x2
- Jgcaap X2
- Didgesteve X2
- Toffiko X2
- Ercxar X2
- NeGriTa79 x2
- O0boiboi0o x2
- Axonn x2
« Extras
GESTURES!
Here you can download the app to set the gesture_set.sh script to make your own gestures.
I am here for you so, ask, debug and comment!
Help me to make this kernel as good as possible!
Recognized by followers
Great Developer DORIMANX
Page modifications by GaboWinter!
302This is long INFO post from real chip designer that help to create CPU/GPU and other chips for the living for 14 years now, so respect
He sent me PM, for now he cant post that by him self.
Vikas is monitoring our thread and want to say his professional stand about UV/OV and why it's works for some and why not for others.
==================
I am calling Vikas(vikas.mishra) to the speech stand
Hello people.
Let me introduce myself - my name is Vikas Mishra and I am a chip designer by profession. .
I have worked on critical parts of design of TI OMAP4, OMAP5, Nvidia Tegra 3 etc and have been doing this for the last 14 years.
Of late - I have seen a lot of folks posting BUGS about undervolting of the GPU/CPU.
I think I can explain what are the possible issues with undervolting/overclocking in a laymans language.
It is a little long winded but I think the length is needed for providing the appropriate context.
* What is inside your Cellphone
Your cellphone is an amazing device. It is a full fledged computer
that fits into your pocket. They have all the standard components
that a computer has - except that they are all usually soldered on
the motherboard directly and are not meant to be user-servicable.
The chief components inside your cellphone are
1. Application Processor (AP)- this is the heart of a modern
cellphone. These are manufactured by many companies - the main
ones are Qualcomm, Nvidia, Samsung and Apple. The other not so
well known ones are made by Texas Instruments, ST Ericsson,
Marvell and Broadcom.
A modern AP has logic to control the camera and process the image
that it generates, to do video encoding (video recording) and
video decoding (movie watching), Audio processor etc. in addition
to the well known CPU and GPU.
2. Power Management Controller - This is the chip that is
responsible for generating and regulating the voltages that are
used by all the components on the board.
3. DRAM - not very different from the DRAM found on a PC (except
that it is lower voltage)
4. Flash - for storage
5. Touchscreen controller
6. Logic for microphone, speaker
7. Battery
One of the most complex piece of circuitry on the phone is the AP
and the power management controller.
* Circuit Basics
A modern AP has millions of circuit units called (Flip
Flops). These flip flops have two parameters associated with them
called Setup time and Hold time. More details on what a flip flop
can be found on the wikipedia at
http://en.wikipedia.org/wiki/Flip-flop_(electronics) . This is a
nice bit of bedside reading if you are interested.
A setup time roughly indicates what frequency you can run a design
or an AP at before it becomes unstable.
A hold time roughly indicates the maximum voltage till which a
design is stable.
A fully technical analysis of what is involved in these timing
parameters requires a degree in electrical engineering but in broad
terms the problem is described below.
Chip designers diligently ensure that all of the millions of the
flip flops in a chip meet the setup and hold time across a broad
range of voltages and silicon parameters. They do a pessimistic
analysis to ensure that a chip will run reliably across a wide
range of voltage/frequency combinations.
However, contrary to the popular belief, chips vary widely in their
silicon parameters. Even chips on a the same wafer and different
flip-flops within the same chip can have widely different silicon
parameters. This is why what works on one particular chip will not
work on the other chip.
Your silicon manufacturer provides a range of voltages and
frequencies across which the device can work reliably. The phone
manufacturer will further narrow down the range depending on the
other components they choose within the phone board.
* How does voltage affect the design
Reducing voltage makes the design slower and increasing voltage
makes the design faster.
So can I keep on increasing the voltage for ever and make the
circuit faster and faster. The answer is no - a point will come when
the circuit will become unreliable. This becomes unreliable because
the "hold time" of one or more of the flops will start
violating.
As you reduce the voltage of the design, the circuit will start
becoming slower. However typically it will continue to work till at
apoint it starts failing - this failure occurs due to violation of
"setup time" of one or more flops in the design.
So what happens when the setup time or the hold time of a design
fails - the answer is that it is unpredictable. Meaning suddenly if
you ask the processor what is the value of 2+2, the answer it will
provide could be unreliable - in some cases it could be 3, in some
cases it could be 4 in some cases it could be -2349783297 (a random number).
I am of course oversimplifying but I hope you get the picture.
* How does undervolting affect your phone processor
The reason undervolting is so appealing to people because they
thing that undervolting will save power and improve battery
life. While this is true in theory, in practice there is a caveat.
It will reduce the power of the chip, but the power consumed by the
phone as a whole will not improve. In some cases in fact it can
deteriorate. Let me explain.
The most power hungry part in the phone is not the AP - it is the
LCD screen. All of these screens consume a ton of power. So even
though your AP is now consuming lesser power, the overall impact to
the phone as a whole is not that much.
If you accompany undervolting with a frequency reduction (which you
should), the total time taken for doing a web page rendering (for
example) would increase. During this time the screen is on and it
has more than compensated for the power that you saved in the
AP.
You could of course come up with examples where this wouldn't
happen - but on a whole, IMHO, you should leave the voltage of the
AP/GPU/CPU to the guys who know the system best - the guys who
designed the chip and people who manufactured it.
* How does overvolting/overclocking affect your phone processor
If you want that last drop of performance from your phone and you
over clock it, at a point some of the design flops will start
violating the hold time and the design will stop working reliably.
Again, in some anecdotal cases this would work - but this is not a
reliable means/mode of working. Just because your friend's or your
first cousin's girlfriend's phone works - doesn't mean yours will
work as well.
* What are the user observable impacts of undervolting/overclocking?
It is hard to say - simply because there are so many of flops in
the design.
In some cases - you wouldn't see anything wrong with the phone
until one day you do. In some cases it will result in a SOD
immediately. In some cases it will result in your phone not waking
up reliably.
IMHO the risks of issues with undervolting/overclocking far
outweighthe potential gains you may get out of it. Usually there
is no lasting damage to the phone/AP if you overlock/undervolt but
it is possible to do it. For example, You run the phone at such a
high frequency that the chip temperature becomes more than what it
was designed for and the Silicon just fails.
So "Just say No". Don't overclock or undervolt your phone -
leave it to the guys who really understand what they are doing.
Thanks,
Vikas233News update!!!
Kernels 8.14 + 9.14 ONLINE!
Kernel is STABLE with good performance + good battery, we worked very hard on this one. (Me and Voku!)
Change Log:
*Voku updated Interactive CPU gov and enabled it. (need to test!)
*Voku updated/Ported many system code and ROW I/O sched tuning.
*Voku Ported and Tuned and reconstructed new CPU HOTPLUG code,
it's name is Inteli Hotplug, originally made by Faux123 for his OMAP device.
this new driver will help to save more power and give us nice performance.
*Voku Ported 3.0.72+73 Main Stream patch's.
*Voku Tuned cortex and profiles to mach new drivers.
*Updated to latest Linaro 13.03 kernel builder.
*Added new EDS module to allow using EDS paid/lite app to encrypt data on your device, module can be loaded via app or via STweaks.
*Allowed to use 1450mV for 520Mhz GPU freq.
*Equalized last CPU chip Voltage table (number 1) to have same CPU voltage as others!
We have 4 different CPU chips all over the world in same device! now all will have same voltage, this will allow higher OC and better battery save for all.
*Added +25mv to 1500mhz and 1600mhz for all chips. to give more stability.
*Updated many CORE and MEM code from 3.9.y kernel.
*Updated many SYSTEM code from 3.9.y kernel.
*Updated many CPU and SMP code from 3.9.y kernel.
*Added auto read ahead tweak, based on sdcard size!
*Updated INIT boot from latest CM-Kernel for 10.1 based ROMS.
*Cleaned old standard hotplug settings and script code.
*Added some STweaks better descriptions in BLN.
*Limited battery charge mA to 650mA, we cant get more any way, hardware limit! no way to have MORE, so 700mA was actually 650,
and we can have MIN of 450mA so no need to ask to set lower, it's will not work.
More can be seen in GIT, for all that love to dig deep
Have fun, and Report = good debug info!
Thanks!
do not REPLY to this POST!201News update!!!
New Kernels: 8.15 + 9.15 (CM/AOKP/STOK and ONLY CM/AOKP)
373 commits added!
856 files changed, 54713 insertions(+), 9173 deletions(-)
This Kernel is A MAJOR update! i have never done such big update before!
We need to test all we can.
Change Log: (i cant write all, it's too much! see gits)
*Voku ported new CPU GOV = ZZMOOVE it's good gov with HOTPLUG ability's and smart cpu management on sleep and wake.
for now no controls for it in STweaks, but you can select it.
*Voku ported new Ultra KSM code from 3.9.Y kernel, it's still in tests, we will see what good we can get from it, read google what is KSM (shared memory control with many apps)
*Voku tuned the Dynamic CPU freq on touch, seems to work good.
*Voku ported kernel patch 3.0.74-76 from main stream.
*Voku ported System code for ARM CPU and system.
*Voku tuned profiles for interactive GOV and other stuff.
*Till we can fix slide2wake to be off in call, it's OFF by default in all profiles.
*Voku ported good patch for Interactive CPU GOV. we need extensive testing.
*Voku ported updates for ROW and NOOP I/O scheds.
*I have made FULL sync of all new code for RAM from 3.9.y Kernel. we have all
*I have ported major update to filesystem + kernel main code + lib, from 3.9.y branch. (it's HUGE update!)
*We have fixed some small bugs in scripts.
*Voku added function to add DATE and TIME to kernel LOGO on each kernel release! that is very COOL
done by auto on kernel build.
have fun, report and test all you can,
RAM performance is now X2 and cpu power is awesome!
battery is holding longer!
it's for now great kernel, but need more time to know that this is STABLE release.
P.S
if you like my hard work, buy me a beer (my beer account is empty )
Thanks for waiting
I hope you READY to see the PICKS
HTC ONE X in the TRASH
performance profile + rootbox 22/04/13 nightly
==========
After some more tests i have fixed some more and tuned profiles.
ALL, please update to 8.16 + 9.16 kernels! (online)
Change Log:
*Voku ported Interactive GOV as is from Google Android Kernel 3.4
*I have reset profiles to not use Interactive as main Default GOV, as it's may be unstable for some users. (profiles will be reset, on boot)
*I have ported major function update from 3.9.y kernel to fix the Ultra KSM and much more.
*I have set HZ value to 250 (was 200) it's effect globally on system performance. and it's best default for android.
============170News update!
OK! here we go again!
ATTENTION ALL ALL!
Kernel 8.0 support ONLY new ROMS based on CM10.1 LAST nightly!
AND all JB SAMMY + ICS SAMMY ROMS!
DO NOT INSTALL on OLD CM/AOKP ROMS! get black screen, dont bother to write here!
=======================================================
Kernel 7.50 THE LAST ONE in 7.XX branch!!!
Support ALL older CM/AOKP + JB SAMMY + ICS SAMMY
NOT SUPPORT ANY NEW CM/AOKP ROMS!
2 kernel have the same new stuff and fixes except the VIDEO DRIVER! and all that needed for NEW CM/AOKP ROMS.
READ the change LOG x 10 times!
Change log:
*Added new video MALI V2 driver to kernel 8.0!
*Fixed WIFI HOTSPOT for new CM/AOKP ROMS (kernel 8.0)
*Fixed broken baseband for new CM/AOKP ROMS (kernel 8.0)
*Fixed SLOW GPU for new CM/AOKP ROMS (kernel 8.0) faster than CM-KERNEL!
*WIFI toggle now works, new CM/AOKP ROMS (kernel 8.0) (ROM BUG)
*Set HYPER as main GOV
*Tuned Kernel performance, now much faster.
*Voku added dynamic touch freq mod.
*Voku added Auto DATA off/on with screen on/off, mod OFF by default.
*Voku fixed KSM MOD.
*I have removed lulzactive CPU GOV from kernel. (was not stable for us)
*Added new JB SAMMY INIT updates from latest kernel.
*Added new CM10.1 INIT updates and mount fixes.
Have FUN.
in download pages, new kernel is in his own section + ODIN kernel.
DO not answer STUPID questions HERE about WHY!!!!????? my screen is BLACK!
and i installed kernel 8.0 on some old junk!
Thanks.
