DEV ONLY - NAND access + Full Unlock for Lumia 710 & 800

Heathcliff74 · Apr 8, 2012

@biktor_gj

Thanks man!

I want to look into this. I'd prefer a portable linux distro, but I'm a Linux n00b, so I don't know which distro's would support this. So, even better would be Win7 drivers for this device.

Can you please give me some details about the usb/fs drivers you use (how is the usb-device and the filesystem recognized? ext4?)

I know you're already working on it with OS Builder. Maybe it's possible to insert an provxml in one of the wmparts and then hardreset and let coldinit.exe do the Interop Unlock. But it would be best to get access to exfat. Hopefully there's a way to accomplish that.

Ciao,
Heathcliff74

surya467 · Apr 8, 2012

biktor_gj said:
It seems it has more to do with firmware version than Serial/Zune menu availability on Diagnostics app. I haven't updated my Lumia, so I can't know for sure. Try powering down the phone and holding vol+, vol- & power. If windows detects a USB disk and tells you it's not formatted, it probably works for you (you can check it by going to Control Panel -> Administrative tools -> Computer Management -> Disk Management)

AGAIN, BE CAREFUL, YOU CAN BRICK YOUR PHONE.

12070 lumia 800 gives a USB input in device manager but doesnt show anythign anywhere in disk manager.

so..i dunno wat to do..if i downgrade i feel sorry for the apps i got

cdbase · Apr 8, 2012

i have installed ubuntu 11.10 and am pressing vol up down with power button and ...nothing happens man nothing appears
firmware 7720.11414

how long do you hold those keys ? do you wait for vibra ?

Heathcliff74 · Apr 8, 2012

I'm pretty sure biktor_gj has some specific drivers installed that allow him to do that. If I hold vol-up and vol-down while connected to windows, I see an extra device: USB\VID_0421&PID_05EE. Vendor ID 0421 is NOKIA. Product ID 05EE is unknown (to me). You need a driver on Linux or Windows to be able to do the connection. If you don't have a driver that connects to this device, the phone will not do anything. If you release the buttons, the phone will continue to boot.

biktor_gj · Apr 8, 2012

Heathcliff74 said:
@biktor_gj

Thanks man!

I want to look into this. I'd prefer a portable linux distro, but I'm a Linux n00b, so I don't know which distro's would support this. So, even better would be Win7 drivers for this device.

Can you please give me some details about the usb/fs drivers you use (how is the usb-device and the filesystem recognized? ext4?)

I know you're already working on it with OS Builder. Maybe it's possible to insert an provxml in one of the wmparts and then hardreset and let coldinit.exe do the Interop Unlock. But it would be best to get access to exfat. Hopefully there's a way to accomplish that.

Ciao,
Heathcliff74

The good thing about linux is that it detects the filesystems inside a partition even if its IDs are wrong, If I plug it on Windows (windows 8 consumer preview but it will work perfectly well on any other OS with usb disk support) it detects it as a USB mass storage device. The problem with Windows is it doesn't correctly detect the Fat32 partition (the partition containing adsp, amss and emmcboot) and asks if you want to format it. If it asks, SAY NO.

With the phone OFF, press and hold Volume UP+Volume DOWN+POWER until you notice a short vibration. Then plug it to the USB port and Windows should install the device like any other pendrive or usb hard disk.

This are the IDs (vendor:device): ID 05c6:9006 Qualcomm, Inc
As you can see it doesn't detect it as a Nokia phone, but a Qualcomm device. That's why I think some engineer at Nokia left some Qualcomm diagnostics application available on the phone. I don't know any other phone with this enabled, but there's something similar on a Huawei X5, which also uses a Qualcomm CPU. But to make my point clear, THIS SHOULDN'T BE ENABLED ON A PRODUCTION PHONE.

Also, just in case you need some more information about my phone:
Carrier: Vodafone Spain
Diagnostics App Version: 1.0.0.0
Firmware Revision: 1600.2475.7720.11414
Radio HW Revision: 8255
Radio SW Revision: 1.6.00.24
ROM Language: 0c0A (spanish)
ROM Version: 7.0.7720.0
OEM Device Name: RM-801 EU 214
Mobile Operator: VOD-ES
Mobile Operator Device Name: Lumia 800
Device HW Revision: 112.1402.2.3

Attached to this post you'll find:
EMMCBOOT.MBN: WinCE loader extracted from the Fat32 Partition
SDB1.ZIP: Contains a full dump of the first partition on the nand, containing the initial bootloader. I think this is just default Qualcomm bootloader
SDB2.ZIP: I think it has the second stage loader, including some kind of firmware update system.
SDB6.ZIP: Contains a full dump of one of the three 3Mb size partitions which I don't know what they are. Maybe you're luckier than me with them. I'd post my entire flash, but it has phone's IMEI, and all the file system on the phone, with all my contacts and stuff... and it's 15Gb in size and there's nowhere to upload that monster. But I'll leave here the hexdump of the 'head' of the file:

Code:

00000000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001c0  00 00 ef 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  01 00 00 00 00 00 55 aa  |..............U.|
00000200  5f 77 6d 73 74 6f 72 65  0b 85 f3 7e 01 a4 99 46  |_wmstore...~...F|
00000210  98 21 7a 4c 48 3f 6b aa  4f 00 53 00 00 00 00 00  |.!zLH?k.O.S.....|
00000220  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000250  00 00 00 00 00 00 00 00  20 00 00 00 00 00 00 00  |........ .......|
00000260  01 00 00 00 b4 2c 72 c4  f8 8e cc 01 00 00 00 00  |.....,r.........|
00000270  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000400  5f 77 6d 70 61 72 74 5f  42 00 53 00 50 00 00 00  |_wmpart_B.S.P...|
00000410  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000440  00 00 00 00 00 00 00 00  00 00 00 00 22 00 00 00  |............"...|
00000450  00 00 00 00 00 02 00 00  00 00 00 00 b4 2c 72 c4  |.............,r.|
00000460  f8 8e cc 01 29 00 00 00  02 00 00 00 00 00 30 02  |....).........0.|
00000470  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000600  5f 77 6d 70 61 72 74 5f  53 00 4c 00 44 00 52 00  |_wmpart_S.L.D.R.|
00000610  31 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |1...............|
00000620  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000640  00 00 00 00 00 00 00 00  00 00 00 00 22 02 00 00  |............"...|
00000650  00 00 00 00 cc 33 00 00  00 00 00 00 b4 2c 72 c4  |.....3.......,r.|
00000660  f8 8e cc 01 20 00 00 00  01 00 00 00 00 00 40 02  |.... .........@.|
00000670  02 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000680  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000800  5f 77 6d 70 61 72 74 5f  53 00 4c 00 44 00 52 00  |_wmpart_S.L.D.R.|
00000810  32 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |2...............|
00000820  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000840  00 00 00 00 00 00 00 00  00 00 00 00 ee 35 00 00  |.............5..|
00000850  00 00 00 00 cc 33 00 00  00 00 00 00 b4 2c 72 c4  |.....3.......,r.|
00000860  f8 8e cc 01 20 00 00 00  01 00 00 00 00 00 40 02  |.... .........@.|
00000870  01 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000880  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000a00  5f 77 6d 70 61 72 74 5f  4e 00 4b 00 00 00 00 00  |_wmpart_N.K.....|
00000a10  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000a40  00 00 00 00 00 00 00 00  00 00 00 00 ba 69 00 00  |.............i..|
00000a50  00 00 00 00 00 2e 00 00  00 00 00 00 b4 2c 72 c4  |.............,r.|
00000a60  f8 8e cc 01 23 00 00 00  01 00 00 00 00 00 50 01  |....#.........P.|
00000a70  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000c00  5f 77 6d 70 61 72 74 5f  55 00 53 00 50 00 00 00  |_wmpart_U.S.P...|
00000c10  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000c40  00 00 00 00 00 00 00 00  00 00 00 00 ba 97 00 00  |................|
00000c50  00 00 00 00 00 1b 00 00  00 00 00 00 b4 2c 72 c4  |.............,r.|
00000c60  f8 8e cc 01 1b 00 00 00  00 00 00 00 00 00 00 00  |................|
00000c70  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000e00  5f 77 6d 70 61 72 74 5f  44 00 50 00 50 00 00 00  |_wmpart_D.P.P...|
00000e10  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000e40  00 00 00 00 00 00 00 00  00 00 00 00 ba b2 00 00  |................|
00000e50  00 00 00 00 00 02 00 00  00 00 00 00 b4 2c 72 c4  |.............,r.|
00000e60  f8 8e cc 01 29 00 00 00  00 00 00 00 00 00 00 00  |....)...........|
00000e70  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00001000  5f 77 6d 70 61 72 74 5f  49 00 4d 00 47 00 46 00  |_wmpart_I.M.G.F.|
00001010  53 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |S...............|
00001020  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00001040  00 00 00 00 00 00 00 00  00 00 00 00 ba b4 00 00  |................|

As you can see it's a IMGFS filesystem

Now to see Fringe

Pleasee use the forum, I already have more than 5 PMs asking for stuff, TOO SOON!!

Heathcliff74 · Apr 8, 2012

Thanks for info.

Unfortunately I can't reproduce the behavior. I'm on Firmware 12070 and diagnostics 1.7, Windows 7.

I've tried both zune and serial mode.

I tried some Nokia driver packages.

If I restart the phone and hold the buttons until the vibrate, I only get 1 extra NOKIA device; an input device.

At no point I get a QUALCOMM or Mass Storage Device, so at this point installing Linux will probably not help me any further

Heathcliff74

ChrisKringel · Apr 8, 2012

Great Thing you have found there

I don't have a Linux PC around right now and really not much time to look into These files. But I justr wanted to give Feedback about entering this Qualcom-Mode: On my (unbranded) Lumia 800 with 12070 everything works fine. I received every update through Zune but this shouldn't matter. So you don't need to downgrade your phone. I just hope that Nokia will not fix this with the next update.

Heathcliff74 · Apr 8, 2012

ChrisKringel said:
Great Thing you have found there I don't have a Linux PC around right now and really not much time to look into These files. But I justr wanted to give Feedback about entering this Qualcom-Mode: On my (unbranded) Lumia 800 with 12070 everything works fine. I received every update through Zune but this shouldn't matter. So you don't need to downgrade your phone. I just hope that Nokia will not fix this with the next update.

Ok. I really don't understand why I can't reproduce this then

Edit: If I press and hold 3 buttons (vol-up, vol-down, power) the phone only gives a short vibration and screen stays black. Nothing will happen until I release the buttons. I get a long vibrate and then it will start with the NOKIA logo and boot to Windows. I don't get any message about a QUALCOMM or disk mode or anything.

Edit 2: My "Device OEM Name" is: "RM-801 EU NDT EURO1" and my "Mobile Operator" is: "000-33". This probably means I got some type of developer phone. Diag version 1.7, Firmware rev: 12070, OS: 7.10.8107. All revisions are the same as biktor_gj.

biktor_gj · Apr 8, 2012

Heathcliff74 said:
Ok. I really don't understand why I can't reproduce this then

Edit: If I press and hold 3 buttons (vol-up, vol-down, power) the phone only gives a short vibration and screen stays black. Nothing will happen until I release the buttons. I get a long vibrate and then it will start with the NOKIA logo and boot to Windows. I don't get any message about a QUALCOMM or disk mode or anything.

You wont see anything on screen since the display will stay black all the time
Release the buttons once you feel that short vibration, and plug the usb. If you keep holding power for more than 5 seconds you will reboot the phone...

Sent from my GT-I9100 using XDA

ombadboy · Apr 8, 2012

Works fine here with 12070.. Windows 8.. I get a USB thing was detected, wanna format bla bla..

Heath, turn off your lumia, plug it in while its powered off, press vol up and down, THEN press button (keep pressing them) until windows shows it detected the device..

let me know if that helped..

Heathcliff74 · Apr 9, 2012

biktor_gj said:
You wont see anything on screen since the display will stay black all the time
Release the buttons once you feel that short vibration, and plug the usb. If you keep holding power for more than 5 seconds you will reboot the phone...

Sent from my GT-I9100 using XDA

ombadboy said:
Works fine here with 12070.. Windows 7.. I get a USB thing was detected, wanna format bla bla..

Heath, turn off your lumia, plug it in while its powered off, press vol up and down, THEN press button (keep pressing them) until windows shows it detected the device..

let me know if that helped..

Both not working for me

I will try another computer tomorrow. But I doubt that will make a difference.

Also when I powered off and connect it to pc, the phone immediately powers on, so I'm not sure why I would need to press and hold the power button. I did it with and without power button; no difference.

Heathcliff74

ombadboy · Apr 9, 2012

Gonna try alternative ways and see if any of those work for you! Will edit with my findings

Try this: power off, hold vol up + down, keep pressing, and then keep pressing power.. After vibration, let go of power, plug in usb, and it should be detected in windows

Heathcliff74 · Apr 9, 2012

ombadboy said:
Gonna try alternative ways and see if any of those work for you! Will edit with my findings

Try this: power off, hold vol up + down, keep pressing, and then keep pressing power.. After vibration, let go of power, plug in usb, and it should be detected in windows

Nope. Doesn't work. If I do that, nothing happens until I release all of the buttons. I get a long vibration and then the phone boots to windows. I think I tried all possible combinations already.

Thanks for helping,
Heathcliff74

beidl · Apr 9, 2012

How did you dump your 15GB partition? Just dd'ing the device to a file?

Sent from my Lumia 710 using XDA Windows Phone 7 App

xsacha · Apr 9, 2012

I tried everything you guys have suggested.
I held two volume buttons and power. Released, noticed vibration. Plugged in to computer. Both Windows and Linux tell me it's "Nokia DLOAD". Shortly after, it will boot WP7.

Same if I plug in to computer first and then press volume and then power.

Is there a chance you guys got given some special developer device or maybe using a different country firmware?

SuperUserMovado · Apr 9, 2012

ON ubuntu 10.04 and works fine for me.
os 7.10.8107
My nautilus is corrupted so I'm not sure how to access the partitions with out it.
Bktor do you have the commands to dump these partitions?

ap3rus · Apr 9, 2012

The described behavior didn't work for me until I decided to update my firmware (12070 from other region -> official 12070 from navifirm/Nokia Care servers) using Nokia Care Suite. I was using it for the very first time, all previous manual updates were installed by updatewp.exe. Since I already was using 12070, but from other region, NCS didn't allow me to update, so only thing I had is to refurbish. What I noticed is that my phone received 2 updates, not one. First update was small, after rebooting phone showed standard 'The phone was updated', NCS meanwhile started sending 12070 update, then what I noticed again - phone didn't shut down with Goodbye words, its display just became black and in Device Manager a new device Nokia DLOAD appeared (I suspect short update was some driver to be able to use this mode), there was some progress moving in Nokia Care Suite after that, finally in some minutes I got the updated but cleaned up handset. What I also noticed, I can now use vol up + vol down combination while powering on to put Lumia into this Nokia DLOAD state (feeling a short vibrate while powering on instead of long vibrate as with usual boot up). I don't have Linux, but neither Windows/Mac show disk drives. Going to install linux now

Hoping this helps someone

biktor_gj · Apr 9, 2012

beidl said:
How did you dump your 15GB partition? Just dd'ing the device to a file?

Sent from my Lumia 710 using XDA Windows Phone 7 App

Well, I first did a DD of the entire disk just in case, and then a DD of all the partitions except partition 5 which is the Extended partition container...

Key combination which work for me:

Hold Power for more than 5 Seconds: Soft reset
Hold Camera+Power: Seems like what you guys call "Nokia DLOAD". I get a picture of a phone and a laptop on screen for some seconds, then it reboots to Windows Mobile. My linux box detects it as a Microsoft HID device:

Code:

generic-usb 0003:045E:041E.0007: hiddev0,hidraw2: USB HID v1.10 Device [Microsoft Windows Phone] on usb-0000:00:06.1-2/input0

Hold Volume UP + Power: I also get the mass storage device mode:

Code:

[  655.912077] usb 2-2: new high speed USB device number 9 using ehci_hcd
[  661.797096] usb 2-2: USB disconnect, device number 9
[  765.836050] usb 2-2: new high speed USB device number 10 using ehci_hcd
[  765.968707] usb 2-2: config 1 has an invalid interface number: 20 but max is 1
[  765.968713] usb 2-2: config 1 has no interface number 1
[  766.869700] usbcore: registered new interface driver uas
[  766.905673] Initializing USB Mass Storage driver...
[  766.905816] scsi2 : usb-storage 2-2:1.20
[  766.906108] usbcore: registered new interface driver usb-storage
[  766.906110] USB Mass Storage support registered.
[  767.906264] scsi 2:0:0:0: Direct-Access     Qualcomm MMC Storage      2.31 PQ: 0 ANSI: 2
[  767.964504] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  767.968542] sd 2:0:0:0: [sdb] 31047680 512-byte logical blocks: (15.8 GB/14.8 GiB)
[  767.969066] sd 2:0:0:0: [sdb] Write Protect is off
[  767.969069] sd 2:0:0:0: [sdb] Mode Sense: 0f 0e 00 00
[  767.970061] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  767.977005]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 >
[  767.977264] sdb: p9 size 30632075 extends beyond EOD, enabling native capacity
[  767.983196]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 >
[  767.983463] sdb: p9 size 30632075 extends beyond EOD, truncated
[  767.988075] sd 2:0:0:0: [sdb] Attached SCSI removable disk

Hold Volume UP+Volume DOWN + Power: The same as above...

EDIT: Shame on you you made me boot to Windows 7

About the Camera+Power key combo, if I plug it to the usb port, then press and hold camera+power, and then release power when I see the picture with the phone and a laptop (attached a photo), Windows 7 actually downloads a driver and puts the phone in something like a MTP device. Cannot access it on anyway, but when it doesn't have any driver it just says Windows Phone, when it installs the driver from Windows Update it calls itself 'SEARAY' (the mainboard codename)

EDIT2: Dump Tool is doing something guys! after 15 minutes my Mac Mini is starting to get a little hot...

Code:

sdb9_redump.payload:
Extracting XIP...Ok

  KERNEL          : WP7

  dllFirst        : 0x4001EF8A (User Lo=0x40010000; Kernel Lo=0xEF8A0000)
  dllLast         : 0x4002F000
  physFirst       : 0x80500000
  physLast        : 0x80956780
  modules         : 77
  RAMStart        : 0x80957000
  RAMFree         : 0x809EF000
  RAMEnd          : 0x83B00000
  CopyEntries     : 3
  CopyOffset      : 0x80583FC0
  ProfileLength   : 0x00000000
  ProfileOffset   : 0x00000000
  files           : 46
  KernelFlags     : 0x00000002
  FSRamPercent    : 0x00000004
  DrivglobStart   : 0x00000000
  DrivglobLength  : 0x00000000
  CPUType         : 0x01C2     (ARMV4I)
  MiscFlags       : 0x0002
  pExtensions     : 0x8050103C
  TrackingStart   : 0x00000000
  TrackingLength  : 0x00000000

XIP (memory spaces bounds):
  User space low bound   : 0x40010000   (ceddk.dll       0x40010000)
  Kernel space low bound : 0xEF8A0000   (rpc_server.dll  0xEF8A0000)

XIP (cecompr.dll): 
XPR: is not supported
LZX: is not supported
XPH: is supported 

XIP (packages):
2b9faa51-bf35-4e40-84d1-8a10aede910b.dsm  QC_7x30_NK                       1600.2475.11414.7720
02e1d1b8-8c53-4c34-9b5d-9228c54e7ba3.dsm  OEM_7x30_NK                      1600.2475.11414.7720
b5332311-48f1-4b76-ad70-8efa5db8fa3a.dsm  MSXIPKERNEL                      7.10.68.7720
f124a3e7-1321-4c02-8a77-73f625ebdc59.dsm  QC_7x30_NK_EMMC                  1600.2475.11414.7720
9ff7ec5f-f708-4d83-927c-c85689559e96.dsm  QC_7x30_NK_EMMC_LOCK             1600.2475.11414.7720
8057be06-5624-4cc3-ac20-3e983d4703ec.dsm  NOKIA_RM801_214_BrandingNK       1600.2475.11414.7720
e9f18a05-77ee-4579-a4f3-22d62c594c42.dsm  NOKIA_RM801_BrandingNK           1600.2475.1.7720
e8126878-1bd6-4aaf-ac1d-b315d7126607.dsm  NOKIA_RM801_214_PhoneMetadata    1600.2475.11414.7720
068e3145-5fbb-489d-ab5a-d6e8b9157d99.dsm  NOKIA_RM801_SPAIN_PhoneMetadata  1600.2475.1.7720
eebbabb2-0689-4692-9e80-5eb9a62126d1.dsm  BaseDrivers_NK                   7.10.68.7720
daf41ca7-392b-496f-ac29-9a88c3f07994.dsm  NOKIA_RM801_PhoneMetadata        1600.2475.1.7720
4f1c798e-206d-41c8-93c5-36781aeeb771.dsm  OEM_7X30_EMMCWP                  1600.2475.11414.7720
ed14fc29-d898-4b33-8d5b-f1d55291fb23.dsm  OEM_7x30_NK_DIP                  1600.2475.11414.7720
4c09c376-dc94-4033-9277-b6732fe19069.dsm  Watson_Core                      7.10.68.7720
7da1c1a8-1fd2-4a18-a081-84e4825266b1.dsm  WinCENLS                         7.10.68.7720
75604d75-c716-4137-86a2-9e3521eeac49.dsm  GFX_NK                           7.10.68.7720
1a4c638a-ecb1-48ad-9efa-92d6859ac1bf.dsm  CCFGSVC                          7.10.68.7720
42d1aab7-6dfa-4c03-9797-d66f7620883d.dsm  MSXIPKERNELLTK                   7.10.68.7720
8ba03a79-81f0-40ff-ae5a-112b35421ff0.dsm  KFPCRT                           7.10.68.7720


Reading IMGFS:
Reading packages.sof...Ok
Reading dsm...Ok

OS:	7.10.68.7720
NetCF:	7.10.68.7720

1600.2475.11414.7720  SYS\AKM_8975                                      
7.10.68.7720          SYS\AppChecker                                    
7.10.68.7720          SYS\APPCHECKER_Lang_0404                          
... too long to fit it in a post... 
7.10.68.7720          SYS\WindowsLiveIDUI_Lang_0809                     
7.10.68.7720          SYS\WindowsLiveIDUI_Lang_0816                     
7.10.68.7720          SYS\WindowsLiveIDUI_Lang_0C0A                     
7.10.68.7720          SYS\XmlLite                                       
7.10.68.7720          SYS\XNA                                           

Certificates:
CN=Microsoft Windows Mobile PCA, O=Microsoft Corporation, L=Redmond, S=Washington, C=US
CN=Microsoft Windows Mobile PCA, O=Microsoft Corporation, L=Redmond, S=Washington, C=US
CN=Microsoft Windows Mobile PCA, O=Microsoft Corporation, L=Redmond, S=Washington, C=US
CN=Nokia Online Certification Authority II, O=Nokia

Certificates in DefaultCerts.dat:
CN=Microsoft Windows Mobile Firmware Installation PCA, O=Microsoft Corporation, L=Redmond, S=Washington, C=US
CN=Microsoft Windows Mobile Firmware Installation PCA, O=Microsoft Corporation, L=Redmond, S=Washington, C=US
CN=Microsoft Windows Mobile Firmware CA, O=Microsoft Corporation, L=Redmond, S=Washington, C=US
CN=Nokia Windows Phone Firmware Signing Authority, O=Nokia
CN=Microsoft Mobile Device Unprivileged PCA, O=Microsoft Corporation, L=Redmond, S=Washington, C=US

What did you say you needed for InteropUnlock?

Dumping all the contents of the flash right now... Let's hope I can build them back!

Any instructions I could follow to recompile the imgfs into something flashable with InteropUnlock enabled?

EDIT3: Attached logs of everything...
EDIT4: This is what Dump Tool said after some minutes when I clicked 'Create Packages'

Creating template...Arithmetic operation resulted in an overflow.
But Advanced Dump Tool shows Packages, the tree structure etc. Don't know where to move forward...

I'm uploading copies of partitions and the structured flash dump to MediaFire so you can take a look to whatever you want... If you don't see it there, it means it's still uploading!

http://www.mediafire.com/?kknt4lnc3tn7w

surya467 · Apr 9, 2012

this is wat i get...but it just flicks away after i let go.
and nothing else happens

now im on ubuntu, and still not able to get it! :/
dis is so sad!

what am i missing?

i think 10207 on lumia 800 doesnt allow this!

beidl · Apr 9, 2012

surya467 said:
this is wat i get...but it just flicks away after i let go.
and nothing else happens

now im on ubuntu, and still not able to get it! :/
dis is so sad!

what am i missing?

i think 10207 on lumia 800 doesnt allow this!

Have you flashed the newest version using NaviFirm or Zune?
I used NaviFirm to flash my 710 (lets face it, chipset-/spec-in-general-wise they are the same) and it works perfectly.

I'll try to dump, unpack and repack mine in a few minutes.

DEV ONLY - NAND access + Full Unlock for Lumia 710 & 800

Inactive Recognized Developer

Senior Member

Senior Member

Inactive Recognized Developer

Senior Member

Attachments

Inactive Recognized Developer

Senior Member

Inactive Recognized Developer

Senior Member

Senior Member

Inactive Recognized Developer

Senior Member

Inactive Recognized Developer

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Attachments

Senior Member

Senior Member

Similar threads

Top Liked Posts