(OC)Official GingerBread Kernel/**Multitouch fix added Aug 08**/Ring no Fade updated

Search This thread

naturist

Senior Member
Dec 7, 2010
1,787
1,223
********* OFFICIAL FOR USE ONLY ON GINGERBREAD ***************
Special thanks to PaoloM70.

Personal Thanks to Andy, Mik_os, Franciscofranco, Ciaox, Noejn and all other devs.
AmonRA to flash it with the need to disable the verification of signatures.
Overclocking
Smartass
Smoothass
Cifs
Supports EXT4
+upstream to 2.6.35.13
+oc, interactive, smartass, smoothass, cifs, ext4
+governor added SavagedZen
+autogroup scheduler (the patch of 200 lines)
+ smoothass smartass with a capped rate (standby) to set minimum
V3 Kernel -Old kernel:
ADB Bugfix for device
Reconfigured various kernel parameters (For better power management, CPU profiles)
-Added for the inversion axes Sippola in the new touch screen driver.
-Simple-inserted I / O scheduler (sio)
-Included various other patches 5-6
-Removed references-debug (smaller kernels)
-Small fix to reduce the impact on the CPU more pressure on the display (you can check with Neocore first ... the difference came in 8-well 9fps now settles down to 2-3fps)

******Updated 25 July*********

Magazine-routine to increase the stability and overclocking performance, cameraflick is absent up to 729mhz
Touch-fix which decreases the occupation of the CPU when you press your finger on the display (should no longer have the lag that had the first version of V4 (I hope))
Magazines-and reinsert all the previous patches (66 patches in total)
Inserted by the kernel-2.6.36 backport of block, and mtd workque
Backport-inserted by the kernel 3.0rc6 and cpufreq of cpuidle

http://www.mediafire.com/?g8r37pzsr3ig21j

+same kernel but without the fix for employment cpu (maybe better in the scroll lag if you have one) **No touch fix kernel***

http://www.mediafire.com/?bed0ht9kcz0071c

******Updated 08 Aug*********
Touch V6 2.6.35.14

V5-like, but updated to version 2.6.35.14
-Added 2.6.36 kernel backported from the i2c
-Support Module tun.ko
-Vsync enabled

http://www.mediafire.com/?otpne0w1v8bhnp8

If you want to try the version NoTouch kernel

http://www.mediafire.com/?4wuiscjcu5xal58

After flashing, wipe cache and davlik.

If you have a2sd then run the following in terminal:
su
a2sd cachesd


The phone will reboot automatically.

Download Ringing with No fade :Now supports Gingerbread 2.3.3 :

http://www.mediafire.com/?1xqcc0jppl2w9ic

Flash and enjoy :)

To know more the original idea, please visit the thread here :

Special Thanks to Januka for the idea.

For devs :

I/Paolo doesn't have a repository, So its uploaded here :

Kernel Ginger Source
http://d-h.st/jvn

u only need to change one line in Makefile

at line 193 change from

Code:
CROSS_COMPILE    ?= /home/paolo/x-tools/arm-spica-linux-uclibcgnueabi/bin/arm-spica-linux-uclibcgnueabi- #CROSS_COMPILE    ?= arm-eabi-
to

Code:
#CROSS_COMPILE    ?= /home/paolo/x-tools/arm-spica-linux-uclibcgnueabi/bin/arm-spica-linux-uclibcgnueabi- CROSS_COMPILE    ?= arm-eabi-
 
Last edited:

metalboy94

Senior Member
May 12, 2011
680
170
Bucharest
Yes, I know I should use search, but please, can anyone explain to me how do smartass and smoothass work in comparison to, for example, conservative and ondemand?

And massive thanks to you mansirawat! :D
 

metalboy94

Senior Member
May 12, 2011
680
170
Bucharest
Otherwise, you prefer wasting perfectly good post space in order to lecture me. Just like half the members of XDA. And the fact that you supposedly come from Romania as well just shows...nah, why bring that up here, all foreigners know it already. :rolleyes:
 

Redpik

Senior Member
Jan 12, 2011
357
64
Bucharest
Stock rooted GB with this kernel (652/320)-> 1152 in quadrant. I don't care too much about those points, but my phone is smoother.
 
Last edited:

sajjan

Senior Member
Jan 24, 2011
136
24
bangalore
Working fine with void forever...yeah its smooth ...got 2020 in quadrant at 806 MHz

Sent from my LG-P500 using XDA App
 

N_lover27

Senior Member
Mar 26, 2011
993
233
********* OFFICIAL FOR USE ONLY ON GINGERBREAD ***************
Special thanks to
PaoloM70.

Overclocking
Smartass
Smoothass
Cifs
Doesn't support EXT4

Hey mansi hows the performance??? If its good then it will be included in my new ROM.

CWM can also be used to flash this zip. Tested(CWM 3.1.0.0) and worked.
 
Last edited:

sajjan

Senior Member
Jan 24, 2011
136
24
bangalore
Well I tried it out of curiousity ....and if not better it's definitely at par.....I still have to check battery life....

Sent from my LG-P500 using XDA App
 

devlin2427

Senior Member
Dec 18, 2010
138
10
its because krant,andy,mik's kernel are made of CM7 sources LG's are diff.

If you flash franco's kernel it will mk ur phone choppy. but you can try. if francos doesn't work you can flash this.....;)

I'm afraid you didn't understand my question. I was asking why would he flash this kernel instead of Francisco's on void#forever.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 34
    ********* OFFICIAL FOR USE ONLY ON GINGERBREAD ***************
    Special thanks to PaoloM70.

    Personal Thanks to Andy, Mik_os, Franciscofranco, Ciaox, Noejn and all other devs.
    AmonRA to flash it with the need to disable the verification of signatures.
    Overclocking
    Smartass
    Smoothass
    Cifs
    Supports EXT4
    +upstream to 2.6.35.13
    +oc, interactive, smartass, smoothass, cifs, ext4
    +governor added SavagedZen
    +autogroup scheduler (the patch of 200 lines)
    + smoothass smartass with a capped rate (standby) to set minimum
    V3 Kernel -Old kernel:
    ADB Bugfix for device
    Reconfigured various kernel parameters (For better power management, CPU profiles)
    -Added for the inversion axes Sippola in the new touch screen driver.
    -Simple-inserted I / O scheduler (sio)
    -Included various other patches 5-6
    -Removed references-debug (smaller kernels)
    -Small fix to reduce the impact on the CPU more pressure on the display (you can check with Neocore first ... the difference came in 8-well 9fps now settles down to 2-3fps)

    ******Updated 25 July*********

    Magazine-routine to increase the stability and overclocking performance, cameraflick is absent up to 729mhz
    Touch-fix which decreases the occupation of the CPU when you press your finger on the display (should no longer have the lag that had the first version of V4 (I hope))
    Magazines-and reinsert all the previous patches (66 patches in total)
    Inserted by the kernel-2.6.36 backport of block, and mtd workque
    Backport-inserted by the kernel 3.0rc6 and cpufreq of cpuidle

    http://www.mediafire.com/?g8r37pzsr3ig21j

    +same kernel but without the fix for employment cpu (maybe better in the scroll lag if you have one) **No touch fix kernel***

    http://www.mediafire.com/?bed0ht9kcz0071c

    ******Updated 08 Aug*********
    Touch V6 2.6.35.14

    V5-like, but updated to version 2.6.35.14
    -Added 2.6.36 kernel backported from the i2c
    -Support Module tun.ko
    -Vsync enabled

    http://www.mediafire.com/?otpne0w1v8bhnp8

    If you want to try the version NoTouch kernel

    http://www.mediafire.com/?4wuiscjcu5xal58

    After flashing, wipe cache and davlik.

    If you have a2sd then run the following in terminal:
    su
    a2sd cachesd


    The phone will reboot automatically.

    Download Ringing with No fade :Now supports Gingerbread 2.3.3 :

    http://www.mediafire.com/?1xqcc0jppl2w9ic

    Flash and enjoy :)

    To know more the original idea, please visit the thread here :

    Special Thanks to Januka for the idea.

    For devs :

    I/Paolo doesn't have a repository, So its uploaded here :

    Kernel Ginger Source
    http://d-h.st/jvn

    u only need to change one line in Makefile

    at line 193 change from

    Code:
    CROSS_COMPILE    ?= /home/paolo/x-tools/arm-spica-linux-uclibcgnueabi/bin/arm-spica-linux-uclibcgnueabi- #CROSS_COMPILE    ?= arm-eabi-
    to

    Code:
    #CROSS_COMPILE    ?= /home/paolo/x-tools/arm-spica-linux-uclibcgnueabi/bin/arm-spica-linux-uclibcgnueabi- CROSS_COMPILE    ?= arm-eabi-
    8
    Theres always room for improvement, if you can do it then it will be great

    This is a great kernel and I thank you Paulo for your hard work, but I'm more interested in taking the good things from it and informing franco and fserve so they can improve their kernels.

    Here's how I see it, this kernel has the CPU Touch fix which helps with battery life and gaming performance. It also supports WiFi tethering on Official LG. IMO francos kernel is equal to or better than it in all other facets. If these 2 fixes are added to francos kernel this one would be obsolete. Again, this is my opinion.

    Although I'm capable of tweaking a few things and updating governors I don't think it's worth the effort. I'd just end up copying the good things from francos kernel to this one, see what I mean, there's no point.
    3
    Hmm, isn't v5 better? I heard that v6 is buggy...

    I never found v6 to have more bugs than v5. Vsync is disabled in v5 so benchmarks are better but at the expense of overall quality. Also, v5 isn't patched to .14.

    Vonpire:
    Exactly what bugs exist in v6 that don't exist in v5? Would you please be more precise than "Yup V5 is much better"?

    I've found plenty of posts where people say "it's better" but with no decent explanation as to why. Is it just the better benchmarks? If so, then v5 is better if you prefer vsync off and v6 is better if you prefer vsync on. That's the only conclusion I can draw.
    3
    > Anyone still have v6 touch kernel and willing to revive a link?

    I think this is it, but I haven't tested it myself. Flash at your own risk. No touch version also included.

    kernel_2.6.35.14_v6-touch3.zip
    kernel_2.6.35.14_v6-notouch3.zip
    3
    As far as i remember his kernel came first, and since the beginning the camera flicker and wifi tethering were fixed, so its kinda hard to believe that he was copying you, but thats just my opinion.

    I didn't say he copied me, and I'm not adding you more fuel. Good day sir.