G
GuestK00288
Guest
This Eclair 2.1 rom is fast and stable.
The interface is standard AOSP ui.
This is a ported version of Super@tmel's latest SuperEclair v8.8. He based his rom off CM5 and made some improvements. Some users in other forums are saying they think it is better than the latest CM5. I have never used CM5 so I can't comment from personal experience.
Linpack scores of 3.6+ with Sanpei's OC kernel update, JitHack, and AutoKiller.
A HUGE thanks goes to lefeudedieu and Switch33 for their contributions.
Apps2SD is working and is the same as Apps2SD in CM5 with sd-ext.
---> The rom will also boot without sd-ext defined. If you want to use Apps2SD make sure the correct partitions defined on your sd card. Read CM5 guides for partition instructions.
It uses Sanpei's latest .32 OC Kernel for 6.35 radio.
Works with both Cursordroid's and Amon Ra's recovery images.
Everything seems to be working except for LWP (see change log in second post for what is working).
Working:
-Multi-language support
-JitHack
-GPS
-Youtube
-Camera
-Bluetooth
-wifi
-VPN
-3D Gallery
-SupSetup4 (not in v2.1)
-Camcorder recording & video playback
-Apps2SD (Must format ext partition to sd-ext[/COLOR]
-Battery life is improved because of kernel update
See change log in next post
Download the cooked ROM :
rapidshare v2.1 FULL
MD5sum 1c1234ce14dc13749461cdce37c64fff
NOTE: If coming from a previous version of this rom or any other rom, do a full wipe and delete the SupSetup folder from your sdcard before booting for the first time.
Instructions:
You need new radio 6.35.10.18, SPL 1.76.2007 and recovery-RA-Magic32A-6.35-v1.6.2 or recovery-RA-hero-v1.6.2.img.
It might work on with other recovery images, but I have not tested them.
If you do not know how to change your radio, SPL and recovery, click here at Cursor's post.
Partition SD Card:
1. Use Cursor's or Amon Ra's recoveries to partition SD card.
2. When phone is off, press Home and Power buttons at the same time to start into recovery.
3. Select Partition sdcard.
4. Select Partition SD.
5. Press Home to confirm.
6. Use trackball to select minimum swap-size of 64 MB (I use 96 MB).
7. Press Home to set swap-size.
8. Press Home to set Ext-size of 512 MB. FAT32-size will be the remainder of the sd card.
9. Press Home to confirm and partition.
10. Press Home to confirm.
11. Exit.
Install ROM:
1. Download the cooked ROM
2. Save the ROM to sd card
3. Wipe data/factory reset
4. Wipe Dalvik-cache
5. Wipe SD:ext partition
6. Flash ROM
7. Reboot
8. Let the rom take its time.
9. Open AutoKiller, click Menu, select/click Presets, select/click Optimal.
10. Open SupSetup and activate JIT.
11. Open TasKiller and AutoKiller to ignore (not sure if this matters, but I don't want TasKiller to shutdown these 2 apps)
12. Configure phone settings, set up accounts, sync, etc.
13. Reboot.
NOTES:
(1) The SupSetup app (if you flashed a version where it is included) in the ROM allows you to tweek the settings for Apps2SD, LinuxSwap, CPU Options, JIT, etc.
(2) AutoKiller optimises the allocation/use/freeing up of memory. After first boot and initial set up, launch AutoKiller app, select Presets, apply desired setting, and reboot.
I am not responsible if you brick your phone.
Apps/Features:
-Sanpei's .32 kernel for 32A 6.35 radio
-JitHack
-Multi-language support
-AutoKiller (for memory optimisation & performance)
-Camcorder recording & video playback
-Apps2SD
-Default home launcher
-3D Gallery
-Gallery
-Astro File Manager
-Battery Widget (by geekyouup)
-Bluetooth File Transfer
-Bookmark Backup
-Car Dock/Home
-Car Mode
-Circular Battery (with percentage) in notification bar
-Custom Locale
-Desk Clock
-Facebook Sync
-Maps4.1 With Navigation Outside USA (Brut's Maps)
-Music Player Widget (from SuperD)
-Phonalyzr
-SupSetup4 (if included)
-TasKiller
-Voice Keyboard
Credits and roms I based my rom on:
....SuperEclair V8.8 original rom by Superatmel
....[KITCHEN] Basic ROM kitchen for aspiring Magic cooks by dsixda
....I used Sanpei's latest 32a .32 new radio 6.35 kernel with OC
....I pulled some lib files from ahmgsk to get the camera working
....Autokiller app by ratson
The interface is standard AOSP ui.
This is a ported version of Super@tmel's latest SuperEclair v8.8. He based his rom off CM5 and made some improvements. Some users in other forums are saying they think it is better than the latest CM5. I have never used CM5 so I can't comment from personal experience.
Linpack scores of 3.6+ with Sanpei's OC kernel update, JitHack, and AutoKiller.
A HUGE thanks goes to lefeudedieu and Switch33 for their contributions.
Apps2SD is working and is the same as Apps2SD in CM5 with sd-ext.
---> The rom will also boot without sd-ext defined. If you want to use Apps2SD make sure the correct partitions defined on your sd card. Read CM5 guides for partition instructions.
It uses Sanpei's latest .32 OC Kernel for 6.35 radio.
Works with both Cursordroid's and Amon Ra's recovery images.
Everything seems to be working except for LWP (see change log in second post for what is working).
Working:
-Multi-language support
-JitHack
-GPS
-Youtube
-Camera
-Bluetooth
-wifi
-VPN
-3D Gallery
-SupSetup4 (not in v2.1)
-Camcorder recording & video playback
-Apps2SD (Must format ext partition to sd-ext[/COLOR]
-Battery life is improved because of kernel update
See change log in next post
Download the cooked ROM :
rapidshare v2.1 FULL
MD5sum 1c1234ce14dc13749461cdce37c64fff
NOTE: If coming from a previous version of this rom or any other rom, do a full wipe and delete the SupSetup folder from your sdcard before booting for the first time.
Instructions:
You need new radio 6.35.10.18, SPL 1.76.2007 and recovery-RA-Magic32A-6.35-v1.6.2 or recovery-RA-hero-v1.6.2.img.
It might work on with other recovery images, but I have not tested them.
If you do not know how to change your radio, SPL and recovery, click here at Cursor's post.
Partition SD Card:
1. Use Cursor's or Amon Ra's recoveries to partition SD card.
2. When phone is off, press Home and Power buttons at the same time to start into recovery.
3. Select Partition sdcard.
4. Select Partition SD.
5. Press Home to confirm.
6. Use trackball to select minimum swap-size of 64 MB (I use 96 MB).
7. Press Home to set swap-size.
8. Press Home to set Ext-size of 512 MB. FAT32-size will be the remainder of the sd card.
9. Press Home to confirm and partition.
10. Press Home to confirm.
11. Exit.
Install ROM:
1. Download the cooked ROM
2. Save the ROM to sd card
3. Wipe data/factory reset
4. Wipe Dalvik-cache
5. Wipe SD:ext partition
6. Flash ROM
7. Reboot
8. Let the rom take its time.
9. Open AutoKiller, click Menu, select/click Presets, select/click Optimal.
10. Open SupSetup and activate JIT.
11. Open TasKiller and AutoKiller to ignore (not sure if this matters, but I don't want TasKiller to shutdown these 2 apps)
12. Configure phone settings, set up accounts, sync, etc.
13. Reboot.
NOTES:
(1) The SupSetup app (if you flashed a version where it is included) in the ROM allows you to tweek the settings for Apps2SD, LinuxSwap, CPU Options, JIT, etc.
(2) AutoKiller optimises the allocation/use/freeing up of memory. After first boot and initial set up, launch AutoKiller app, select Presets, apply desired setting, and reboot.
I am not responsible if you brick your phone.
Apps/Features:
-Sanpei's .32 kernel for 32A 6.35 radio
-JitHack
-Multi-language support
-AutoKiller (for memory optimisation & performance)
-Camcorder recording & video playback
-Apps2SD
-Default home launcher
-3D Gallery
-Gallery
-Astro File Manager
-Battery Widget (by geekyouup)
-Bluetooth File Transfer
-Bookmark Backup
-Car Dock/Home
-Car Mode
-Circular Battery (with percentage) in notification bar
-Custom Locale
-Desk Clock
-Facebook Sync
-Maps4.1 With Navigation Outside USA (Brut's Maps)
-Music Player Widget (from SuperD)
-Phonalyzr
-SupSetup4 (if included)
-TasKiller
-Voice Keyboard
Credits and roms I based my rom on:
....SuperEclair V8.8 original rom by Superatmel
....[KITCHEN] Basic ROM kitchen for aspiring Magic cooks by dsixda
....I used Sanpei's latest 32a .32 new radio 6.35 kernel with OC
....I pulled some lib files from ahmgsk to get the camera working
....Autokiller app by ratson
Attachments
-
snap20100623_085959.png43.3 KB · Views: 2,637
-
snap20100623_090007.jpg18.4 KB · Views: 2,444
-
snap20100623_091207.jpg16.5 KB · Views: 2,537
-
snap20100623_091221.png50.4 KB · Views: 2,048
-
snap20100623_091243.png29.4 KB · Views: 1,759
-
snap20100623_091251.png26.2 KB · Views: 2,041
-
snap20100623_091347.png17.4 KB · Views: 1,416
-
snap20100623_091422.png82.2 KB · Views: 1,454
Last edited: