Hard-SPL - Or How to (SIM)Unlock & Protect Your Device

Search This thread
By:
Advanced…
Razor1973

Razor1973

Senior Member
Jun 23, 2006
682
31
Florida
What am I doing wrong? (part 2)

capture02072008215529uv3.jpg


capture02072008215535yp2.jpg


As soon as I clicked Next, I get the following progress bar on my laptop:

capture02072008215538hv8.jpg


... and the typical "The program is from an unknown publisher..." on my Treo's screen for the enterbootloader.exe file. I accepted. Next one was the JumpSPL.exe file. Accepted. Right away, I got the red/blue/green/white screen and it said

By Olipro & Cmonex
IPL-SSPL-Olinex

By Olipro & Cmonex
SSPL-1.01.OliNex

USB

1.01 again.. Where am I supposed to see 1.40? Keep in mind I just downloaded this file from the beginning of this thread yesterday.

A short while later, I get an error message from CheetahUnlocker.

capture02072008215730ai7.jpg


What am I doing wrong?

One last comment. Neither my miniSD card nor my SIM card have been in the device while I do this.

Thanks in advance.
 
Last edited:
Razor1973

Razor1973

Senior Member
Jun 23, 2006
682
31
Florida
Actually, guys, I finally solved the problem using the RUUWrapper method in this thread. I believe the reason for my issues is because my Treo was already unlocked from when I did my WM5 to WM6 upgrade. I just get confused and don't know the exact differences between SIM-unlock, CID-unlock, ROM-unlock, etc.
 
dj_suca

dj_suca

Senior Member
Apr 12, 2007
293
32
Lisbon
hi everyone, i tryed to unlock my new treo 750v, but i dont have the usb cable so i have put the program on the card and runed but with no success because on net wirk 02

can any one tell me how to install from de memori card!
 
P

pariscy

Member
Feb 12, 2008
7
0
Larnaca
HELLO.
I HAVE A PALM TREO 75Ov.
i try to use the cheetah unlocker but i receive error message about the net framework. i install this too many times but the unlocker can't find it.

any help please.
many thanks
 
S

salkhap

New member
Apr 9, 2008
2
0
Information Inquired

HELLO. I HAVE A TREO 750 CINGULAR WITH IPL-0.20 y SPL-0.22.0000 AND TRY INSTALL THE UNLOCKER TO UPDATED TO WM 6.1. LITE. THE TREO DON´T ACEPT THE UNLOCKER AND THE SOFTWARE SAID THE FILE IS CORRUPTED. WHAT CAN I DO? THANKS FOR YOUR ATTENTION
 
C

cupubgt

New member
Jul 6, 2008
3
0
how can i upgrade my SPL version from 1.40 to higher.. my bootloader say ," Chee100 IPL-0.20" "And "chee100 SPL-1.40.Olinex"

any 1 can help me??
 
E

echo-trader

New member
Jun 30, 2007
2
0
OLDHAM
palm treo 750 unlocker dont work

I have done this about 15 times time after time this happens, after the first step finishes, when I click the second step this is the massage I get ( CHEETAH UNLOCKER Unhandled exception has occurred in your application. If you click continue ,the application will ignore this error and attempt to continue, if you click quit, the application will close immediately, the system cannot find the file specified) DETAILS See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.ComponentModel.Win32Exception: The system cannot find the file specified
at System.Diagnostics.Process.StartWithCreateProcess(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start()
at AthenaUnlocker.Form1.runExecutable(String path, String args, String wdir)
at AthenaUnlocker.Form1.button2_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///c:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
AthenaUnlocker
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Documents%20and%20Settings/daddy/Desktop/PALMTREO750UNLOKER/palmtreoUnlocker.exe
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
zip
Assembly Version: 0.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Documents%20and%20Settings/daddy/Desktop/PALMTREO750UNLOKER/palmtreoUnlocker.exe
----------------------------------------
AthenaUnlocker
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Documents%20and%20Settings/daddy/Desktop/PALMTREO750UNLOKER/palmtreoUnlocker.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

if I press continue the second stage starts it finishes and sys(your device must be unblocked with a program, please configure your device and then connect and sync. After doing so, click ok and watch your device screen,) I pressed ok then the first massage comes on again, I am sick of it please advice it’s doing my head in
 
N

nortonix

New member
Jul 10, 2008
2
0
Sos...

Hi all!
I have Treo 750v loked on Vodofone..
I type random unlock code 2 times. and i use 2 times "Hard-SPL and SIM Unlocker" . My treo on startup write : "You have tried 12 times, please wait until timeout". I'm wait 2 days... and no result(((

I use "CheetahUnlocker"..use STEP2.. he reflash my radio-module.. and program say "you telephone is unlocked!" but on startup SimLock with "wait until timeout"

Help, Please!!!
and sorry my English.i speak wery bead((


PS!!!
i have error after flashing :
"CHEETAH UNLOCKER Unhandled exception has occurred in your application. If you click continue ,the application will ignore this error and attempt to continue, if you click quit, the application will close immediately, the system cannot find the file specified"
 
Last edited:
A

artii

Member
Apr 4, 2008
17
0
HI,

I've downloaded the cheetah unlocker but the issue i'm having is that it gets stuck on the bootloader.

Any ideas on why this is happening?
I'm just trying to flash the phone so I can upgrade to 6.1

Thanks.
 
Last edited:
J

japunlock

Member
Aug 15, 2005
29
3
echo-trader said:
I have done this about 15 times time after time this happens, after the first step finishes, when I click the second step this is the massage I get ( CHEETAH UNLOCKER Unhandled exception has occurred in your application. If you click continue ,the application will ignore this error and attempt to continue, if you click quit, the application will close immediately, the system cannot find the file specified) DETAILS See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.ComponentModel.Win32Exception: The system cannot find the file specified
at System.Diagnostics.Process.StartWithCreateProcess(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start()
at AthenaUnlocker.Form1.runExecutable(String path, String args, String wdir)
at AthenaUnlocker.Form1.button2_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///c:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
AthenaUnlocker
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Documents%20and%20Settings/daddy/Desktop/PALMTREO750UNLOKER/palmtreoUnlocker.exe
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
zip
Assembly Version: 0.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Documents%20and%20Settings/daddy/Desktop/PALMTREO750UNLOKER/palmtreoUnlocker.exe
----------------------------------------
AthenaUnlocker
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Documents%20and%20Settings/daddy/Desktop/PALMTREO750UNLOKER/palmtreoUnlocker.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

if I press continue the second stage starts it finishes and sys(your device must be unblocked with a program, please configure your device and then connect and sync. After doing so, click ok and watch your device screen,) I pressed ok then the first massage comes on again, I am sick of it please advice it’s doing my head in
Click to expand...
Click to collapse
i have same error after step2
i did the procedure before but now it always show this error after step 2 and doesnt upload unlocker app
 
D

danielehk

Senior Member
Mar 21, 2007
64
0
Hi, I have the some problem.
Can someone send me the athenaunlocker step 3 cab file, I will try to install throught my sd card.
Daniele
 
guitardoc64

guitardoc64

Senior Member
Sep 26, 2007
2,120
556
Lake Charles,LA
OnePlus 7 Pro
OnePlus 8T
japunlock said:
i have same error after step2
i did the procedure before but now it always show this error after step 2 and doesnt upload unlocker app
Click to expand...
Click to collapse

I feel your pain. Trying to install this on a friends 750, It gets thru the first part, gets the error and never completes part 2 to move on to part 3.
Trying to get the upgrade(6.1) to function from the SD is not working either.
 
R

rioferraz

Senior Member
May 30, 2007
268
23
Dear friend ... follow the steps of release and see the message that appeared:

Decrypted stored Sum: 2020202020202020
Decrypted calcd Sum: CB2C31FAACFE5801
Checksums did NOT match!
Could not determine the key index to decrypt it.
Your ICD block must be corrupted or file is not
from a valid ICD dump!
Aborting operation.

As you guided me to proceed?
 
You must log in or register to reply here.

Similar threads

navenedrob
Treo 750 Hard-SPL/Unlock/Unbrand Guide
Replies
30
Views
54K
B
bluevoice
A
How to: Remove Olipro Hard-SPL 1.40
Replies
13
Views
14K
Fjtorsol
Fjtorsol
S
  • Sticky
Links to all known official WM6 releases
Replies
143
Views
146K
Gans15
Gans15
R
Rogers Phone [unlocked], FIDO SIM, always Roaming...
Replies
8
Views
17K
mpg187
mpg187
dubravk0
  • Poll
UNLOCKED TREO 750 WITH HERM_unlock_tool_v3
Replies
43
Views
42K
A
ahmedb

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 1
    Olipro
    Olipro
    [size=+2]Cheetah Hard-SPL and SIM Unlocker is now released![/size]

    Ignore any images for Hermes please... this all works for your device; if you ask once whether it's going to work properly, I will find you and kill you...r dog.

    YOU MUST HAVE .net framework 2.0 INSTALLED

    to download, [size=+1]Click Here[/size]

    If you are already SIM unlocked, then just run step 1, the other two are essentially optional for you.

    [size=+1]Please report success or failure on this thread[/size]

    SPL version displays 1.40.OliNex.

    Current Features:
    Code: 
    [b]CURRENT FEATURES[/b]
-SuperCID (no CID checks anyway)
-no Code Signing
-SPL protected
-IPL protected
-Password for commands not required
-Accepts any Password
-Run 'task 2a' via mtty to fix bad blocks
-Rtask also in SPL
-ModelID ignored

[b]Changelog[/b]

[b]Hard-SPL-1.40[/b]
-Initial Release
    View

New posts