[JB : 4.1.2][Hybrid][P6200\P6210] Paranoid Android v2.50 [25/10][WIP]
- Thread starter Androguide.fr
- Start date
Did it count that I made a logcat after FC?
FC happens after reboot, always. I then run my logcat after I got to adb wireless (because for some reason I couldn't connect my devices to adb via USB).Because I'm so surprised my logcat is long, I did make a logcat again here
http://pastebin.com/T6bcGBHf
I think I saw E about systemui status bar tabletmode something there ..
Also I did experience couple of systemui FC (I didn't run logcat this time, sorry
), once when I opened Youtube, and once Adobe reader, but offcourse It didn't FC the apps.Thank you for your effort!
Did it count that I made a logcat after FC?
Because I'm so surprised my logcat is long, I did make a logcat again here
http://pastebin.com/T6bcGBHf
I think I saw E about systemui status bar tabletmode something there ..
Also I did experience couple of systemui FC (I didn't run logcat this time, sorry
Thank you for your effort!
Thanks a lot for the detailed feedback:good:
Basically, if your logcat wasn't recording during the fc it wont appear in the log :s
But anyway i'll look into it, will surely try to rebuild at least the framework files later today.
Just flashing for p6200 build, been great so far. But soft button navigation bar for phablet is way too small, compared to cm10 build. Any way to increase this?
Thanks for the great work. It's a reward for us being patient
Sent from my GT-P6200 using xda premium
Thanks for the great work. It's a reward for us being patient
Sent from my GT-P6200 using xda premium
Hi, first off, thank you so.much for bringing PA to our device.
I installed and tested but it seems that PA setting cannot change any of the apps' size. I dont see any difference in apps no matter what size I set for an app.
For example, the interface and the size of Google Play store is always the same no matter what value I set under size or ui tab. Im not sure if PA setting works at all in the current build. (Too bad that you dont have the device)
Also, theres no difference between Phone and Phablet mode.
Anyone else experiencing this issue?
Anyway, Keep up the wonderful work! We will just keep reporting!
Sent from my GT-P6200 using xda app-developers app
I installed and tested but it seems that PA setting cannot change any of the apps' size. I dont see any difference in apps no matter what size I set for an app.
For example, the interface and the size of Google Play store is always the same no matter what value I set under size or ui tab. Im not sure if PA setting works at all in the current build. (Too bad that you dont have the device)
Also, theres no difference between Phone and Phablet mode.
Anyone else experiencing this issue?
Anyway, Keep up the wonderful work! We will just keep reporting!
Sent from my GT-P6200 using xda app-developers app
Last edited:
love this... just keep it up! Everything is running well..
its same reports like others
- fc's system ui on tablet mode..
- nav bar too small. i set the dpi size but still can't get the same size like on the 1st page
its same reports like others
- fc's system ui on tablet mode..
- nav bar too small. i set the dpi size but still can't get the same size like on the 1st page
Finally, the perfect rom arrived for our Devices! =D
Everythings fine but same FCs on systemUI:
Here my log for like 2 mins from startup till shutdown:
http://db.tt/D0shOY8x
I get tons of no recource for systemUI stuff like this from 10-19 16:17:42.0 :
Then, there is a fatal exception for System ui at 10-19 16:17:43.145 :
Did a wipe for cache + dalvik cache on install, no factory reset.
But since everyone got same issues...
Once again: Thanx a lot!!!
Edit: Switched to phablet mode with expanded desktopN
Size seems normal now, but the touch area for buttons is a bit off them.
(Existing issue on CM10 with our tablets)
Sent from my GT-P6200 using xda app-developers app
Everythings fine but same FCs on systemUI:
Here my log for like 2 mins from startup till shutdown:
http://db.tt/D0shOY8x
I get tons of no recource for systemUI stuff like this from 10-19 16:17:42.0 :
Then, there is a fatal exception for System ui at 10-19 16:17:43.145 :
Hope its usefull...
Did a wipe for cache + dalvik cache on install, no factory reset.
But since everyone got same issues...
Once again: Thanx a lot!!!
Edit: Switched to phablet mode with expanded desktop
NSize seems normal now, but the touch area for buttons is a bit off them.
(Existing issue on CM10 with our tablets)
Sent from my GT-P6200 using xda app-developers app
Last edited:
Edit: Switched to phablet mode with expanded desktop
Size seems normal now, but the touch area for buttons is a bit off them.
(Existing issue on CM10 with our tablets)
Sent from my GT-P6200 using xda app-developers app
Do you notice any difference between phone and phablet mode? Because I don't.
Also, do you get different sizes for apps set under PA setting? Because I don't no matter what size I set for any app.
Finally, the perfect rom arrived for our Devices! =D
Everythings fine but same FCs on systemUI:
Here my log for like 2 mins from startup till shutdown:
http://db.tt/D0shOY8x
I get tons of no recource for systemUI stuff like this from 10-19 16:17:42.0 :
Then, there is a fatal exception for System ui at 10-19 16:17:43.145 :
Hope its usefull...
Did a wipe for cache + dalvik cache on install, no factory reset.
But since everyone got same issues...
Once again: Thanx a lot!!!
Edit: Switched to phablet mode with expanded desktop
Size seems normal now, but the touch area for buttons is a bit off them.
(Existing issue on CM10 with our tablets)
Sent from my GT-P6200 using xda app-developers app
Thanks a lot man, now I can see what's wrong : looks like there's a typo in a systemui xml file :
Code:
Error inflating class com.android.systemui.statusbar.policy.CompatModeBu ttonCan you please confirm that the space in "CompatModeBu _ tton" exists in the original log ? (Just to make sure it's not a quoting typo).
Last edited:
in my logcat is like this..
E/AndroidRuntime( 2197): java.lang.RuntimeException: Unable to create service com.android.systemui.SystemUIService: android.view.InflateException: Binary XML file line #48: Error inflating class com.android.systemui.statusbar.policy.CompatModeButton
Now I know a little bit about logcat, lol...
keep up the good work :good:
edit: no space, but somehow it shows with space?!
Last edited:
Cant see a space in the log file. Only 4 to 5 results for CompatMode, only in 16:17:43.145 all with *Button behind but no spaces:
10-19 16:17:43.145 E/AndroidRuntime( 2183): java.lang.RuntimeException: Unable to create service com.android.systemui.SystemUIService: android.view.InflateException: Binary XML file line #48: Error inflating class com.android.systemui.statusbar.policy.CompatModeButton.
Iam gonna do a clean install when i get back to work and create a logcat again. Lemme know if i can do sth more.
Cheers dude! :beer:
Sent from my GT-P6200 using xda app-developers app
10-19 16:17:43.145 E/AndroidRuntime( 2183): java.lang.RuntimeException: Unable to create service com.android.systemui.SystemUIService: android.view.InflateException: Binary XML file line #48: Error inflating class com.android.systemui.statusbar.policy.CompatModeButton.
Iam gonna do a clean install when i get back to work and create a logcat again. Lemme know if i can do sth more.
Cheers dude! :beer:
Sent from my GT-P6200 using xda app-developers app
Thanks a lot. I'm actually compiling an experimental v2.23 build using the phablet overlay, like we do on p68xx. Not sure how it's gonna behave on a 1024x600 resolution though.
I'll need you guys to test it for me. If there are problems I'll rebuild using the regular hdpi overlay.
I'm thinking maybe the error comes from the fact that I built v2.22 just a few minutes after the new changes were merged, so maybe there still was an error that was quickly fixed afterwards. We'll see.
v2.23 Released
Ok guys, new build, new hope ^^
I built v2.23 only for p6200 atm, I'll wait for feedbacks on whether the paranoid prefs are working or not before building p6210.
The new build has been pushed OTA, so you can update right now using the goo manager app included in the previous build.
Or you can use the download link below :
Ok guys, new build, new hope ^^
I built v2.23 only for p6200 atm, I'll wait for feedbacks on whether the paranoid prefs are working or not before building p6210.
The new build has been pushed OTA, so you can update right now using the goo manager app included in the previous build.
Or you can use the download link below :
Patiently waiting for the P6210.
Sent from my Galaxy Nexus using Tapatalk 2
As above, really looking forward to this one
As above, really looking forward to this one
I really need to hear some feedback from a p6200 user of this latest build to know if I can build "as-is" for your tabs, or if the paprefs issue still persists.
But don't worry, either way I'll surely build for p6210 by tomorrow or the day after that
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
49
HOW TO SET THE WORKSPACE MODE
I do not own this device, I built Paranoid Android for p6200/p6210 on request.
Therefore, the builds are not tested before release, remember you flash this at your own risk
IF COMING FROM STOCK : Do NOT wipe anything, Flash this rom directly, reboot recovery, then wipe data (factory reset), cache and dalvik, and then Re-Flash this Rom again. This will get you safe from bricking your emmc chip.
¤ Download the ROM :
11v2.50 (build 2)
BothBoth P6200 and P6210? Or only one of them? Haven't flashed yet because I'm waitin' for ya update to v2.50.
Here's v2.50 using the previous v2.22 kernel. Most likely should solve most issues we had so far.
7New Builds
New builds (v2.53) for p6200 & p6210 are being uploaded as we speak.
Once again, as you know, I'm having problems with my smdk4210 builds lately, so these are for testing purposes only atm.
This time I'm using the latest teamhacksung's smdk4210_new kernel sources instead of the CyanogenMod smdk4210 sources I usually use.
Links will be posted as soon as they're available.7ok ill try that...thanks..
and no new update for new PA..? its already on v2.53 and it looks pretty cool!!
i know that ur so awesome! :highfive: this tab is already in very stable & almost perfect build..battery is really great
please..!more updates!!!
Well, I'm maintaining Paranoid Android for 6 different devices, writing the apk version of Pimp my Rom, rewriting all its scripts.
I also have a real-life job, I'm doing this development on my free-time, and moreover for free.
So please understand that I try my best to provide all my users with fast updates, I always build as soon as I can.
Asking for ETA's won't make things happen any faster.7Good news !
The bootloop issue is finally figured-out, thanks to matangelo
The problem is coming from the modifications I made to the smdk4210 kernel (mainly adding zRam support for p68xx). But though p68xx & p62xx share the same kernel, your tabs seem to not like my modifications.
A quick-fix while waiting for v2.50 to build is to replace the boot.img inside the pa zip with the boot.img from cm10, the rom should boot properly.
Thanks for your support and patience guys, you'll finally get a functional PA build today
