WARNING: By doing this your Spen will not work anymore
Ok here is how to root the P607T right now. It is the same way as Root for the P605 right now. After reading
http://xdaforums.com/showthread.php?t=2766394&page=9
on post 88. Someone with the P605 used the P905 CF-Auto root to root their 605.
here are the steps
1. Download to your PC
http://download.chainfire.eu/385/CF-Root/CF-Auto-Root/CF-Auto-Root-viennalte-viennaltexx-smp905.zip
2. Reboot your P607T into Download Mode. You can do this by turning off the tablet. then hold Home + Vol-D + Power you will get a screen that says Press Vol D to get into Download mode.
3. Plug your P607T into your PC.
4. Open Odin 3.07 which is included with the down you already did. You should see a Blue tab that says something like Com1.
5. Make sure the only thing that is checked is Auto-reboot.
6. Click PDA and file the CF-Auto-Root-viennalte-viennaltexx-smp905.tar that was in the Zip file you just unziped.
7. Click start and wait.
Your tablet will now reboot into a P905 recovery and flash SuperSU. It can take awhile for the reboot into recovery to happen so just wait. After this is all done your tablet will boot back into Android. Go into the play store and update SuperSU. SuperSU will keep FCing until you update it in the Playstore.
Now here is the problem we run into if you do all this. After CF-Auto Root is done it is going to put a P905 recovery on your Tablet not a P607T recovery. If you want to get your P607T recovery back for future OTAs you need to Odin the full Firmware for the P607T which you can find here.
http://www.sammobile.com/firmwares/3/?download=29807 Once they get a working TWRP for KitKat and the P605 we should be able to get everything else we need to get back our old recovery.
Now another problem That I have found as well is that the Spen does not work after doing this. I do not really care because I do not really use the Spen. I know there is a fix in this thread
http://xdaforums.com/showthread.php?t=2766394&page=9 but I have yet to get it to work because I do not know how to type the *#2663# in phone app and then update wacom firmware from kernel to get the Spen to work. We do not have a Phone app to do that. So you are warned that your Spen will not work after doing this.
Other Wise enjoy root until a better way is out.