Mfastboot
Although Mfastboot.exe works with most Motorola Devices, the exact files and flash commands may vary, best to see specific forum/threads for the device.
I haven't updated this thread for a while.
Mfastboot still works, but the flash commands have changed for newer devices.
See Guide: Motorola Firmware
Watch Videos
Download
Verify Files
Install Moto Drivers
Setup Mfastboot.exe
Show known File Types
Short Version - Flashing System Only
Long Version -Using Mfastboot to Flash Firmware
Although Mfastboot.exe works with most Motorola Devices, the exact files and flash commands may vary, best to see specific forum/threads for the device.
I haven't updated this thread for a while.
Mfastboot still works, but the flash commands have changed for newer devices.
See Guide: Motorola Firmware
- Motorola devices only.
- Can be used with Windows/Linux/Mac but this thread will only have instructions for Window (10)
- Instruction for using Mfastboot on Linux/Mac should be similar as standard Fastboot for Android
Watch Videos
- [Video]Using Mfastboot.exe to Unbrick a Motorola device
- How to Firmware Restore your Motorola Device on Windows 10 without RSDlite by RootJunky
Download
- Motorola Drivers
- Mfastboot files: Mega - AFH - XDA - Drive -
DevHostno longer Safe - - Firmware for your Device
Verify Files
- Compare File Size with file size form download site
- Use Hash Checksums
- mfastboot-v2.zip (1.36 MB) MD5 Sum: 83650a3589d2ecd7c8115ce860d45a23
Install Moto Drivers
- Extract files from zip
- Run Motorola_End_User_Driver_Installation_....msi
- Reboot PC
Setup Mfastboot.exe
- Extract mafastboot.zip to a local drive
- Example - C:/Mfastboot
- Open start menu and type CMD
- Right click on CMD > select open file location
- Find cmd.exe, right click and copy
- Paste into Mfastboot folder
Show known File Types
- Open C:/Mfastboot folder
- Select View>options>Change folder and Search options
- In Folder Options Select Tab View
- Uncheck Box: Hide Extensions for Known file Types
- Select OK
Short Version - Flashing System Only
In some cases only System.img is necessary- Type commands
Code:
mfastboot flash system system.img
- Type commands
Code:
mfastboot reboot
- Press enter
if Device does not boot try Long Version
Long Version -Using Mfastboot to Flash Firmware
Note: The exact files needed will very by device model- Extract files from Firmware xml.zip
- Copy
Code:
NON-HLOS.bin system.img boot.img recovery.img
- Boot Device to AP Fastboot Mode (Power Off, Hold Volume Down, Press power button for 2-3 secs then release)
- Note Click here If you see Low Battery, Click here if you see Fastboot Reason: Sticky bit factory_fastboot
- Run cmd.exe in Mfastboot folder
- Type commands
Code:
mfastboot flash modem NON-HLOS.bin
- Press enter
- Type commands
Code:
mfastboot erase modemst1
- Press enter
- Type commands
Code:
mfastboot erase modemst2
- Press enter
- Type commands
Code:
mfastboot flash system system.img
- Press enter this may take several minutes to finish and be flashed in several segments.
- Type commands
Code:
mfastboot flash boot boot.img
- Press enter
- Type commands
Code:
mfastboot flash recovery recovery.img
- Press enter
- Type commands
Code:
fastboot erase cache
- Press enter
- Optional Data Wipe: Type commands
Code:
fastboot erase userdata
- Press enter
- Type commands
Code:
mfastboot reboot
- Press enter
- Device should boot normally, If not see RSD Lite or House of Moto
Attachments
Last edited: