[Kernel] ICS (3.1 and 2.6.39 versions) (V25.5 and V1.1)

dragonfire353 · Apr 22, 2012

I left my tf101 in the dock with an SD card all night and woke up to a sod as well

Sent from my Transformer TF101 using XDA

woti23 · Apr 22, 2012

dragonfire353 said:
I left my tf101 in the dock with an SD card all night and woke up to a sod as well

Sent from my Transformer TF101 using XDA

same here, SOD with sd card in dock, micro sd in screen works without SOD

linuques · Apr 22, 2012

I can also confirm that the SOD is still present with dock and SD card. Its less frequent, but still there.
If it sleeps for only a few minutes, there is no SOD. It seems to only occur in longer periods of deep sleep.

henkmasterpro · Apr 22, 2012

For the first time in a long period (1 month), the tablet didn't have a SOD. As soon as i place a SD card in the dock (also adapters) the first SOD is only minutes away (after standby). It's clear that the SOD I'm facing with has something with the notification "preparing external memory" of something (I think)

Puzzlegirl · Apr 22, 2012

linuques said:
I can also confirm that the SOD is still present with dock and SD card. Its less frequent, but still there.
If it sleeps for only a few minutes, there is no SOD. It seems to only occur in longer periods of deep sleep.

+ 1, this is what I've noticed too. Just taken the SD card out of the dock to see how it goes. It's still a great kernel though!

Sent from my Galaxy Nexus using Tapatalk 2

taptotap · Apr 22, 2012

with #15 and sd card in dock NO sod!

#16... sod.. soo.... back to #15 for now.... (testymeh sod as well with sd in dock)

antond57 · Apr 22, 2012

I'm on Megatron 1.0.4.
With kernel #15 almost a week without RR or SOD.
This morning kernel #16 flashed (downloaded via Megatron Parts) and this evening a the first SOD.
Used clocks 216 / 1200 Interactive. Changed to 312 / 1200 now and lets wait.
Btw it's a TF101G, docked, without any external storage / SD card.

darsej · Apr 23, 2012

Test 15 is giving me SODs constantly... Trying now test 16!

ugrubni · Apr 23, 2012

i donno if its kernel related but i flashed #16 and i cant find some wifi networks anymore, ..tried with my one x and laptop also, ..everything fine

other wlan networks the transformer found working fine

suur13 · Apr 23, 2012

ugrubni said:
i donno if its kernel related but i flashed #16 and i cant find some wifi networks anymore, ..tried with my one x and laptop also, ..everything fine

other wlan networks the transformer found working fine

To me also with 16 signal strength was lower (altough the speed might have been faster because of VENO).

ugrubni · Apr 23, 2012

suur13 said:
To me also with 16 signal strength was lower (altough the speed might have been faster because of VENO).

yes, but iam just beside the wlan router

drakal · Apr 23, 2012

My tab shut down in deepsleep. I think voltage for loxs frequencies is to undervolt. Before i have +50MV at 216-312-456-608...

CAn you make a v16b with best voltage for low frequencies?

woti23 · Apr 23, 2012

drakal said:
My tab shut down in deepsleep. I think voltage for loxs frequencies is to undervolt. Before i have +50MV at 216-312-456-608...

CAn you make a v16b with best voltage for low frequencies?

+1 i think you have a point, they are too low

i made an init.d script

Code:

#!/system/bin/sh
echo "0 0 0 0 0 0 0 -50 -50 -100 -100 -100 -100" > /sys/devices/system/cpu/cpu0/cpufreq/UV_mV_table

which gives following higher voltages (negative in UV_mV_table means higher voltage !)

Code:

1704000 1475 1475
1640000 1450 1450
1600000 1425 1425
1504000 1350 1350
1400000 1275 1275
1200000 1100 1100
1000000 1000 1000
912000 950 1000
760000 875 925
608000 850 950
456000 800 900
312000 775 875
216000 750 850

and the SOD when inserted sd card in dock is gone.

edit: well - the fun was not long - now it lasts a little longer till SOD, after a while still SOD

still think its too low

edit2: did set the voltages higher again

Code:

echo "0 0 0 0 0 0 -50 -100 -100 -125 -150 -175 -200" > /sys/devices/system/cpu/cpu0/cpufreq/UV_mV_table

no SOD after 20 minutes, will try longer

chatch15117 · Apr 23, 2012

if i take the damn SD card out i dont get sleep problems. wtf man

and i mean the dock sd card, not the microsd. also the tablet doesnt have problems if i undock it

Nick502 · Apr 23, 2012

yea, mine wakes up in sleep every 2mins or so.

Is this kernel stable enough for daily use ?

woti23 · Apr 23, 2012

chatch15117 said:
if i take the damn SD card out i dont get sleep problems. wtf man

and i mean the dock sd card, not the microsd. also the tablet doesnt have problems if i undock it

with the higher voltages for the lower frequencies at works now for me with sd card in dock.

woke up after 2 hours in deep sleep without any problem

BLAST3RR · Apr 23, 2012

Have been trying out test15 for a week now..

I can say I really love it!

Doing 7 days on a single battery load, without a single SOD and WiFi on. Have had a SD card in briefly, and I haven't got a dock.
Must say I don't really use the tablet that much (although it's a good alarm in the morning). Just love the stability.

In any way muchos better than the stock kernel.

test15 + ARHD 3.2.0

Saav · Apr 23, 2012

Using test16 kernel on ARHD 3.2.1, no problems so far, super smooth

. I've noticed the default clock is 1200Mhz now. I haven't been a fan of overclocking so my question is, is it safe for daily use? Will it have any long term negative effects? I know i can return it to stock frequency but it seems overall smoother and i want to leave it like this.

suur13 · Apr 23, 2012

suur13 said:
PM sent.

Tried test13. Same - SOD in 10 minutes.

I can really say that something is in this new suspend code with TF101G and/or dock. My tab sleeps fine with your test 11b and TestyMeh 0.8 kernel (both released before this code change). Test 13 and > or Testymeh 1.0 both produce SOD even with WAKE LOCK.

But the issue is that with your kernel I do not have CIFS and with 0.8 no 3g data.

db3 · Apr 23, 2012

Saav said:
Using test16 kernel on ARHD 3.2.1, no problems so far, super smooth . I've noticed the default clock is 1200Mhz now. I haven't been a fan of overclocking so my question is, is it safe for daily use? Will it have any long term negative effects? I know i can return it to stock frequency but it seems overall smoother and i want to leave it like this.

I think that's been default for the last 2 versions at least. i actually increase it to 1400 and haven't had any issues at all (YMMY). It's incredibly stable. I also set the governer to conserative -- battery life has been very nice too.

suur13 said:
I can really say that something is in this new suspend code with TF101G and/or dock. My tab sleeps fine with your test 11b and TestyMeh 0.8 kernel (both released before this code change). Test 13 and > or Testymeh 1.0 both produce SOD even with WAKE LOCK.

But the issue is that with your kernel I do not have CIFS and with 0.8 no 3g data.

Try a later version. I'm on Test v15 and AOKP-33 and have not had any issues at all. it's wonderful!

[Kernel] ICS (3.1 and 2.6.39 versions) (V25.5 and V1.1)

Senior Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Top Liked Posts