[Kernel][LINARO][May- 28][ICS & JellyBean] Sliding_XSola v4.0 [Stock][CM]
- Thread starter OmarBizreh
- Start date
-
- Tags
- development
Both ext_card and internal_memory are mounting on PC and in the phone on stock with v3.1.
Re: [Kernel][LINARO][March - 29] Sliding_XSola v3.1 [Stock][CM]
Yes, you can
Sent from my MT27i using Tapatalk 2
Yes, you can
Sent from my MT27i using Tapatalk 2
Flashed the v3.1 Stock and EVERYTHING works as it should be!
Smooth,lag free,fast booting,all storages recognized properly.
There's a WIDE variety of Governors to use (Awesome!)
Finally,hands on the Lulzactiveq governor! :good: I'll get to test it right away!
Thank you so much Dev!!!! :good::good::good::good:
Keep up the excellent work!
Ps:What's new on the 3.0.71 Kernel?
Is there a place a could get something like a change log? Just asking!
Smooth,lag free,fast booting,all storages recognized properly.
There's a WIDE variety of Governors to use (Awesome!)
Finally,hands on the Lulzactiveq governor! :good: I'll get to test it right away!
Thank you so much Dev!!!! :good::good::good::good:
Keep up the excellent work!
Ps:What's new on the 3.0.71 Kernel?
Is there a place a could get something like a change log? Just asking!
Re: [Kernel][LINARO][March - 29] Sliding_XSola v3.1 [Stock][CM]
Latest kernel version available for xSola is 3.08
Plz bring a new update with this version
Sent from my MT27i using Tapatalk 2
Latest kernel version available for xSola is 3.08
Plz bring a new update with this version
Sent from my MT27i using Tapatalk 2
Latest kernel version available for xSola is 3.08
Plz bring a new update with this version
Sent from my MT27i using Tapatalk 2
Hi,
Some problems when flashing v 3 and 3.1 from v2, it's spends a long time checking for errors in internal storage. Wen't back to v2 ( na droid backup)
Any idea ? I am on Divash x2 xperience.
Thanks,
Re: [Kernel][LINARO][March - 29] Sliding_XSola v3.1 [Stock][CM]
Delete or move all files from system/etc/init.d
than try it
Sent from my MT27i using Tapatalk 2
Delete or move all files from system/etc/init.d
than try it
Sent from my MT27i using Tapatalk 2
Re: [Kernel][LINARO][March - 29] Sliding_XSola v3.1 [Stock][CM]
Why mine is usb not reconigzed if connected to PC?
But if I change the kernel with stock or munjeni kernel my usb wirking fine..
Sent from my MT27i using Tapatalk 2
Why mine is usb not reconigzed if connected to PC?
But if I change the kernel with stock or munjeni kernel my usb wirking fine..
Sent from my MT27i using Tapatalk 2
check this out..-->https://www.kernel.org/
it says the latest stable kernel is 3.8.5 why is it that your kernel was at 3.0.71?
it says the latest stable kernel is 3.8.5 why is it that your kernel was at 3.0.71?
Re: [Kernel][LINARO][March - 29] Sliding_XSola v3.1 [Stock][CM]
because there is no source for ux500 chipset so he survive with kernel 3.0.x
Sent from my MT27i using xda premium
---------- Post added at 08:30 PM ---------- Previous post was at 08:29 PM ----------
check the cable, mine is OK... no issues.
Sent from my MT27i using xda premium
because there is no source for ux500 chipset so he survive with kernel 3.0.x
Sent from my MT27i using xda premium
---------- Post added at 08:30 PM ---------- Previous post was at 08:29 PM ----------
check the cable, mine is OK... no issues.
Sent from my MT27i using xda premium
Re: [Kernel][LINARO][March - 29] Sliding_XSola v3.1 [Stock][CM]
Change USB connection mode from MTP to MSC
Sent from my MT27i using Tapatalk 2
Change USB connection mode from MTP to MSC
Sent from my MT27i using Tapatalk 2
I'm glad everything is working as it should be, Xperia P and U users are reporting issues, I'm happy here no one is complaining
For those who are having mounting issues, try a different port, different cable, remove device drivers from your pc then re-install them, that should fix the issue
As for kernel version, this is how linux kernel tree works:
3.0
| \ 3.0.1 - 3.0.2 - 3.0.3... 3.0.8 (the one Sony uses) -3.0.9 - 3.0.10 .... 3.0.71 (the one I'm using)
|
3.1
| \3.1.1-3.1.2 ....
|
3.2
The main line of the kernel is 3.x, every version that has a "y" (i.e. 3.x.y) the "y" refers to fixes from new versions backported. While I was applying those updates some of the patches had code that is included for patches in the 3.4 kernel, so the one Sony is using is old, but when the phone was out that was the newest version, I don't know why companies don't update their kernel's when a software update is released.
and I can't update the kernel to 3.8 because it needs a lot of code to be included and needs the manufacture to write it, they know best about the hardware they are selling
For those who are having mounting issues, try a different port, different cable, remove device drivers from your pc then re-install them, that should fix the issue
As for kernel version, this is how linux kernel tree works:
3.0
| \ 3.0.1 - 3.0.2 - 3.0.3... 3.0.8 (the one Sony uses) -3.0.9 - 3.0.10 .... 3.0.71 (the one I'm using)
|
3.1
| \3.1.1-3.1.2 ....
|
3.2
The main line of the kernel is 3.x, every version that has a "y" (i.e. 3.x.y) the "y" refers to fixes from new versions backported. While I was applying those updates some of the patches had code that is included for patches in the 3.4 kernel, so the one Sony is using is old, but when the phone was out that was the newest version, I don't know why companies don't update their kernel's when a software update is released.
and I can't update the kernel to 3.8 because it needs a lot of code to be included and needs the manufacture to write it, they know best about the hardware they are selling
thank you for your kernel.. feels like my sola is not laggy. oh my bad its not feels like. it realy doesnt lag at all even though im on stock fw. cheers. got to edit the signature though!... :0
Re: [Kernel][LINARO][March - 29] Sliding_XSola v3.1 [Stock][CM]
Ive got two unexpected reboots. I just left phone and found it rebooted.
Anyone or just me?
EDIT: it was me, i did something and the reboot followed few mins after. Now its ok, working very well.
Sent from my MT27i using xda app-developers app
Ive got two unexpected reboots. I just left phone and found it rebooted.
Anyone or just me?
EDIT: it was me, i did something and the reboot followed few mins after. Now its ok, working very well.
Sent from my MT27i using xda app-developers app
Last edited:
Hey guys I'm gonna be a bit late in reading all comments and taking necessary action because of one simple reason: Yesterday at 3 PM electricity went off in all Damascus because of major issue in electricity lines of the south parts in Syria, and until now it's not properly back, we still have blackouts, and my build machine is at home (while now I'm writing this reply from my laptop and I'm at the mall, so there is electricity )
once everything is back to normal I will go back to work
)once everything is back to normal I will go back to work
Tried flashing it 2 times so far, keeps making the phone unusable. It can't boot. I just reset it, fastboot, install older working kernel again and it boots.
Am i doing something wrong here?
It's stock ICS .54, jb experience v2. Others reported that it works without problems on it.
edit: Found it, was an error on my side after all. Sorry!
Am i doing something wrong here?
It's stock ICS .54, jb experience v2. Others reported that it works without problems on it.
edit: Found it, was an error on my side after all. Sorry!
Last edited:
Similar threads
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
80Kernel Features:
- Based on Sony Latest Source Code: 6.1.1.B.1.54 / .56 / .75/ 6.2.A.0.400.
- Based on Linux Kernel Source Code: 3.0.78. (JellyBean kernel is still 3.0.08)
- Compiled Using Linaro 4.7
- FXP Recovery
- Init.d Support.
- Auto Root.
- Auto Install for Wi-Fi Modules.
- Good Battery Life.
- NTFS Support
- CIFS Support
- Clean-Cache Support
- ext 2 / 3 / 4 Support.
- Kernel Image Compressed Using LZO.
- Governors:
- IO schedulers:
Things you MUST know about:
- None so far
Recommended Governor - I/O Schduler for best performance and battery life.
- You tell me, I can't make the decision since i don't own the device.
Recommended For All Users:
- To get better graphics score for 2D graphics, go to: Settings -> Developer Options -> Force GPU 2D Rendering
I used to get 270 in benchmarking score for 2D Graphics, but after enabling it, I started getting above 970 (That was the case on Xperia P)
Known Issues:
- Auto Root script is not working so I had to remove it from the kernel for now, please refer to 2nd post for rooting
Credits:- Thanks To Sony for: Kernel Source Code.
- Thanks To @DooMLoRD for: Auto Root Script & Init.d Enabler Script.
- Thanks To @matood for: Helping me in testing.
- Special Thanks To @FXP For The Source Code.
- Special Thanks To @alivanov79 For His Ramdisk.
Always Remember:
- Please Don't mirror my files, I like to keep track of download count.
- Report Bugs in this thread and I will fix them as soon as possible.
- If you like my kernel please rate it
- If you like my work and would like to support me ( Here ) I appreciate it
Change Log in Second Post:
--------------------------------------------------------------------------------------------
Download Link: (Clearing Cache and Dalvik-Cache recommended)
--------------------------------------------------------------------------------------------
Old Releases:
--------------------------------------------------------------------------------------------
How To Flash
- fastboot flash boot name_of_file_you_downloaded.img
- You need an unlocked bootloader to use this kernel
Sources: Github
24Version 4 (Stock ONLY) Change Log
- ICS kernel links for CM9.1 & Stock included in Download section of this post.
- v4 is for Stock JellyBean ONLY. v3.x & v2 are for ICS ONLY
- Based on FXP source code for CM10
- All features of ICS kernel included
- All Governors & IO Schedulers of ICS kernel also included (maybe I missed on or two, but the important ones are there )
- irq: Set CPU affinity as soon as the irq thread is created [1]
- ARM: decompressor: Enable unaligned memory access for v6 and above [2]
- Source code will be uploaded tomorrow
Explanation for [1] & [2]
------------------------------------------------------------------------------------------------------
Side Note
- You may have heard of XDA - DevCon, well I got an invitation to that event but my only issue is I'm financially tied.
Download
- Sliding_XSola [Link is for both Stock and CM + includes ICS and JellyBean kernel] (Wipe cache and dalvike cache, it's a
MUST)
23Rooting Your Device:
- Flash this via CWM and your device will be rooted
- Only flash the file above if your device is not rooted
- The file linked above is for the SuperSU app by Chainfire.
------------------------------------------------------------------------------------------------
Change Log:
------------------------------------------------
[9-4-2013] Version 3.3
------------------------------------------------------------------------------------------------
- Fixed remaining bugs.
- Improve performance.
- Improve battery life.
[5-4-2013] Version 3.2
------------------------------------------------------------------------------------------------
- Added new governors: OnDemandQ - Hotplug (got it from a different source) -
InteractiveTest (it's the same as InteractiveX but got it from a different source,
please test it and tell me if it's better than the already included interactiveX) - Some under the hood changes
[29/3/2013] Version 3.1:
- Added Nightmare and Lulzactiveq governors.
- Updated to latest Linux Kernel Source Code: 3.0.71.
- Fix current issues.
[27/3/2013] Version 3:
- Compiled Using Linaro 4.7
- Updated to latest Linux Kernel Source Code: 3.0.70.
- Fix current issues.
[25/3/2013] Version 2:
- Added all missing functions in OP.
- Few more modifications for better performance.
[23/3/2013] Version 1:
- Initial Release.
------------------------------------------------------------------------------------------------13Version 3.4 (Stock & CM) Change Log
- Updated linux kernel source code to 3.0.78
- Enabled zCache and zRam
- Added missing flags for a complete -O2 optimization..
- Enabled Cleancache.
Download
- Sliding_XSola 3.4 - Stock (Wipe cache and dalvike cache, it's a
MUST) - Sliding_XSola 3.4 - CM (Wipe cache and dalvike cache, it's a MUST)
Side Note
- You may have heard of XDA - DevCon, well I got an invitation to that event but my only issue is I'm financially tied. This kernel got 600+ downloads for v3.3 (and 10$ donations which I'm really grateful for donations are calculated for each version.), I really appreciate it if at least each one of you guys donate a 1$ so I can afford paying for the plane ticket .
- Special Thanks To: @matood & @itachilinux, they where always here for help
11
no offence taken my friend, itachilinux point was:
Kernel development takes lots of time and hardwork, and no one on this forum is forcing people to use specific kernel / rom / mod ..etc
so if someone doesn't like what he got from a certain kernel / rom / mod on this forum he can simply use another one without providing a feedback with negative attitude.
I'm not talking about your comment where you asked for the CWM touch version you have the right to add requests, but I've seen lots of negative attitudes from users and some from Recognized devs trying to just devastate someone to push him to a point where he stops doing what he is doing (and it happened on S3 forum a dev pulled out all of his work for the S3 just because of such attitudes)
a recognized dev on xperia p started rating my kernel as bad, and attacking, because his kernel was the best custom kernel before I came and made my Sliding_XP, that's when competition started for him.
I'm still trying to find a way to bypass the block Google put on Syrian IP Addresses preventing them from accessing AOSP servers. For now I will do what @pukhrajsoni suggested, make a version without recovery so you guys can install the touch recovery, hopping I can find a way to be able to download CWM source code and apply the touch patch on it and include it in my kernel
Remember we are here to help and get help
