T
TheLostPlaces
Guest
Dear,
Thank thanks a lot for your support and patience.... It's working very well!
You are welcome
Dear,
Thank thanks a lot for your support and patience.... It's working very well!
Short answer: Yes.Would the easiest way to test this is just run a wire from the 2 grounds to the ground on my battery and test. That way I don't have to drill another ground if it is still happening?
Sent from my Ascend Mate 2
Under 10 ohms?So when I check the ground with the voltage meter on the wire harness what should it be reading?
Sent from my Ascend Mate 2
Hey guys,
so I tried now to remap my hardware keys of the unit.
I want to change my radio button to Spotify. So I've got car service and the correct pkg name for Spotify (com. spotify.music) and know which button it is in my case (app_43). Car Service is also enabled in Xposed.
I created the "mtc-keys" folder in all mentioned paths (mnt/internal_sd mnt/internal_storage mnt/external_sd) and created a "mtc-keys.ini" file in there. But the button is still mapped with its original function.
Any ideas what I could try next?
I'm wondering is the function acutally remapped with this method or is the button doubly occupied?
Hey guys,
Any ideas what I could try next?
I'm wondering is the function acutally remapped with this method or is the button doubly occupied?
My Huifei 2-din audi a4 avant rk3188 from 2002 with subwoofer and amplifier.
the amplifier also sit on the back seat
By update I had to set the recovery all over again
No sound along behind or do not become activated
It did work
Who can help me to put into effect this again
Is there a secret menu in the radio voltages?
or do I need to type something in the terminal
it is possible that it may be due to the radio, because it has always worked.There is not a specific number, the closer to 0 the better.
---------- Post added at 11:23 PM ---------- Previous post was at 11:19 PM ----------
Can you remap the other buttons? It took some trial and error for mine to work. I moved the ini file to every SD location before I found the correct location. Also the case and wording of the ini commands make a huge difference. And always reboot the system between changes.
---------- Post added at 11:27 PM ---------- Previous post was at 11:23 PM ----------
Have you checked the lines going to the Amp. Make sure the amp is still working. Is the Amp not turning on because its not getting the correct turn on signal or is it bad? Maybe bad fuse.
Hi all,
I guess this is my first reply in these forums, though I follow topics I'm interested in.
I was wondering if anyone could help me with an advice on what could be the problem with my unit.
I have a Klyde unit for Mazda 3 2008. It is the 4x Core and HD screen one. The problem seems to be with the Canbus decoder I got. Thing is the buttons on the steering wheel work well, also, I can adjust the car's clock using the interface provided with the unit (Control Settings I think is the name of the app) but I cannot access the Trip Computer no matter what.
Previously I had Eonon D5151 (WinCE one) and it worked to access the Trip Computer using the steering wheel buttons, but with this one...no chance.
What I tried without success:
- changed the Canbus selection in the Factory Settings (not all of them, just the ones containing MAZDA in their title)
- click all the buttons on the same interface used to access the car's internal clock
- tried to remap the SWC buttons but this action doesn't seem to work either (not sure why I did this, though, cause it would make no difference, haha)
The Canbus decoder I got is
MAZDA-RZ-01, HW: V3.4
Since I can access Clock functions on my vehicle I was thinking the Canbus decoder is the correct one. Or ... is it? Should I ask for a different Canbus decoder? (anyone with Mazda 3 BK has a model of decoder that works and can tell me the SN?)
Few more secondary questions:
- my Up/Down arrow keys on the steering wheel change the songs in the opposite direction (Up changes to next while Down changes to previous). Since I can't reconfigure my keys from the HU, is there any other way of doing this? (except getting used to it, of course )
- there is a Beep sound when clicking the screen etc, which I would like to have. But the "stock" one is very very very loud and this version of Android doesn't seem to have Volume adjustment for it. Is there any way to solve it?
Thanks!
it is possible that it may be due to the radio, because it has always worked.
after the update / new mcu, it no longer works
otherwise I'll go check the wires and fuse
What color is the origin wire?
I have snatched this fresh rk3066, 800x480, official firmware from KLD:
KLD_rk3066_p(20150820).7z.part2.rar
KLD_rk3066_p(20150820).7z.part1.rar
I could make a fake rk3188 800x480 image out of it, too. But maybe @typos1 gets access to the rest of them?
Can someone explain what these options stand for and what they do. I know what front cam is and key light lol. 2
What about keymap option? I have 3 to choose fromRadio Data System (RDS) is a communications protocol standard for embedding small amounts of digital information in conventional FM radio broadcasts. RDS standardizes several types of information transmitted, including time, station identification and program information.
Wheel3 is mistranslation. Something like free wheel. Has to do with the volume knob. Check that box and the volume knob doesn't work.
Rudder is mistranslation for steering wheel. Lets the unit know whether it is in a left hand drive or right hand drive car.
Disable app install prevents the installation of apps from unknown sources. Check that box and the menu setting that allows you to install apk from unknown sources will be grayed out.
View attachment 3538172
Can someone explain what these options stand for and what they do. I know what front cam is and key light lol.
Sent from my Ascend Mate 2
I have some questions.
1. I mean that i read it here, but I'm not sure. At the moment I have very often the bug, that the volume button not works. Mute works, but louder and quieter not. I don't know when it doesn't work, but after a while no function.
2. Since a few days I have the wifi problem, that wifi works sometimes and after a while too, it shows empty bars and shows the connection but it doesn't work. In other case if I start the radio he can't find any WiFi. Why?
3. Since a few days the touchscreen doesn't work. I have set, that i can See if i touch. Then it shows a point. so i can see that the touch works, but there is no reaction. After a minuten the radio shows the bootlogo and have a loop. So i have start the radio new with reset or power off from the car.
All this errors are since a few days. I tried to do any settings but the problem is always here. Does anyone no about that? I think it's an app, but I don't know which one. The last chance (if I get no solutions) is to install another rom?
I have JY 2.73 with the Malaysk Rom from September (1024).
Thanks
Hi together this is an important announcement!
As you knew Mike an me we were talking about a dedicated section.
This is now achieved and I am requested by him to sort things out from here.
I will split out some Key knowledge posts, for example malaysks Firmware-Post, to new Threads in our subforums.
Developers
Please if you create new work open you own Thread in the new forums. If you already have posted here probably wait until I split your post out or write to me to ensure I will split you out if you think I missed you or you have a critical release.
Questionning Users
Please open your own thread for your questions in our new section. I can not split out every question from here. This thread will be left over for searching so please if you have current questions just ask in our new Q&A-Section.
I will start splitting up this thread in about one hour.
You can find the new section at the bottom of this link:
http://xdaforums.com/android-auto
Thank you!
- [user=853627]@coudu[/user] (rooted, stock). Early v4.0 and v4.1 have some problems.
- [user=3590033]@Malaysk[/user] (rooted, with very useful mods, some come with NEXT launcher)
- [user=6041319]@dsa8310[/user] (rooted, almost stock)
[B]- Boot Up:[/B]: time is around 30s.
[B]- GPS[/B]: GPS positions very fast. TomTom, Navigon, Sygic, and regular off-line GPS work. Navigon and Sygic have some problems with some ROMs
[B]- Stand by mode[/B]: Latest ROMs and MCU have the possibility of choosing stand by mode with various times chosen.
[B]- Radio:[/B] radio stations are saved as frequencies
[B]- Bluetooth contacts:[/B] contacts are saved on the device.
- Works fine with Bose system (Audi)
- Possible ground loop noise that needs some tricks to be removed (see section problems)
- Torque works and can run in parallel with A2DP
- ELM327 works (might need special app like CarService in very weird cases)
- Camera works (might be better to get the one with RK3188 chip)
- There is no automatic brightness control because the unit does not have light sensor, but there are apps that can help
- The touch screen is extremely responsive. It works as good as most phones.
1- Install the APK.
2- Make sure you are connected to WiFi and you have an internet connection.
3- Open Root Master (do not upgrade to newer version unless you can read chinese, The newest version has different options, all in chinese. Version 2.1.1 just has a button that says "root".))
4- Press root button
5- Chinese characters will flash across the screen.
6- A second popup box will appear, press the purple button.
- cd /mnt/sdcard
- su
- pm install "NameOfTheApp".apk