[RECOVERY][TWRP][J510][ROOT] TWRP 3.0.2 for Samsung Galaxy J5(2016)

wowanbelousov · Jun 27, 2016

TWRP 3.0.2 for Samsung Galaxy SM-J510@ J5(2016)

Description:
Bugs
- Brightness slider
- PC mounting MTP (but adb should work)
__________________________________________________________________________________________________
INSTALLATION(Instructions)

Code:

1. Install device usb drivers and Odin 
2. Power off the device.
3. Boot to download mode (VOLUME DOWN/HOME/POWER).
4. Volume UP once.
5. Open Odin  as an administrator, connect the device to a usb port, 
and make sure a blue button appears and says "Added" in description on the left.
6. Select AP or PDA for older Odin and search for the downloaded tar file.
7. Uncheck auto reboot from the second tab.
8. Start flash and you should see the succeeded command.
9. Unplug the device and long press POWER until it powers off or remove the battery.
10. Reboot to TWRP and enjoy! (VOLUME UP/HOME/POWER).

Many thanks vaibhavpandeyvpz!:good:
Tested model SM- J510H(FN)@ J5(2016) for other models not yet verified

ROOT J510 ( tested model J510H / J510FN / J510F / J510GN )
Flash zip SU
https://download.chainfire.eu/969/SuperSU/UPDATE-SuperSU-v2.76-20160630161323.zip
___________________________________________________________________________________
Ver / TWRP 2.8.7.0 fix
http://xdaforums.com/showpost.php?p=68624038&postcount=28

Yuen.Jason22 · Jun 28, 2016

Nice Bro!! Thank you for your work

Btw does it works in my J5108 lollipop 5.1.1? :highfive:

wowanbelousov · Jun 28, 2016

Recommended Installation Flow:
Flash TWRP via ODIN
Reboot to Recovery (TWRP)
Flash latest SuperSU zip (anything > 2.46)

wowanbelousov · Jun 28, 2016

Deleted

wowanbelousov · Jun 28, 2016

Got Root !::good:
All thanks vaibhavpandeyvpz!!!:good:

Yuen.Jason22 · Jul 4, 2016

That's great!

A huge step forward in the development of SM-J510

Thank you Bro! ????

XtremeX · Jul 4, 2016

Me too.
Got Root access on SM-J510GN. Thanks for the great work!

Yuen.Jason22 · Jul 4, 2016

Deleted

andre6b · Jul 21, 2016

Hi guys,

Just tried it on SM-J510GN, but flash failed:

<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!

On the phone screen it showed something about flash being prevented by security lock or similar. Maybe I was using wrong Odin? Any thoughts?

Yuen.Jason22 · Jul 22, 2016

andre6b said:
Hi guys,

Just tried it on SM-J510GN, but flash failed:

<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!

On the phone screen it showed something about flash being prevented by security lock or similar. Maybe I was using wrong Odin? Any thoughts?

Bro have you enabled USB Debugging in Developer Options in Settings app? It'd be better

XtremeX · Jul 24, 2016

Enable OEM Unlock in Developer options and also remove all Google accounts before proceeding to flash using ODIN. Otherwise your device will be stuck in boot loop (with Samsung boot screen).

Sent from my SM-J510GN using XDA-Developers mobile app

andre6b · Jul 25, 2016

Yuen.Jason22 said:
Bro have you enabled USB Debugging in Developer Options in Settings app? It'd be better

It was off! Well, thanks, will retry now

---------- Post added at 09:22 AM ---------- Previous post was at 09:09 AM ----------

By the way, will Samsung's updates still work after rooting?

Yuen.Jason22 · Jul 25, 2016

andre6b said:
It was off! Well, thanks, will retry now

---------- Post added at 09:22 AM ---------- Previous post was at 09:09 AM ----------

By the way, will Samsung's updates still work after rooting?

OTA updates probably won't, I guess

If you have already flashed TWRP recovery, then KNOX counter would have been triggered and no updates and warranty from Samsung. :crying:

But you can always flash new Samsung firmwares via Odin

just go to Samsung firmwares website and search for your model number and download the new updates manually

avicohh · Aug 1, 2016

Hi
There is some bug in this recovery,
After I install it, when I tried to make a factory reset from the settings, the phone keep booting to recovery again and agian after the wipe. even if i choose reboot>system in twrp it keep rebooting into recovery, until I flashed the stock recovery again.
Can you fix this problem please? my device is J510FN.
Thank you very much!

Huee · Aug 1, 2016

Brightness bug is only in slider on the task bar ? Can I change the level of the brightness in settings ?
Cuz i need this function but i want to delete all.of trashes which samsung gave me

. Last question if I will flash device to.orgginal software KNOX flag will be returning to correctly status and i shouldn't have problems with warranty?

Yuen.Jason22 · Aug 3, 2016

Huee said:
Brightness bug is only in slider on the task bar ? Can I change the level of the brightness in settings ?
Cuz i need this function but i want to delete all.of trashes which samsung gave me . Last question if I will flash device to.orgginal software KNOX flag will be returning to correctly status and i shouldn't have problems with warranty?

Once you tripped KNOX to 0x1, it would be recorded at a E-Fuse which permanently marked that you have void the warranty. Samsung customer service centres would refuse to repair your device

suhailr323 · Aug 9, 2016

I tried this methid and installed recovery image sucessfully. But after flashing Superuser.zip my phone stuck on Samsung logo. My model is J510FN. What may cause the problem. Any help is apprciated.

---------- Post added at 08:55 PM ---------- Previous post was at 08:52 PM ----------

XtremeX said:
Enable OEM Unlock in Developer options and also remove all Google accounts before proceeding to flash using ODIN. Otherwise your device will be stuck in boot loop (with Samsung boot screen).

Tried it all. Stuck on Samsung Animation after flashing superuser.zip

cilmanalo · Aug 20, 2016

Will this trigger the knox counter on the phone?

Yuen.Jason22 · Aug 21, 2016

cilmanalo said:
Will this trigger the knox counter on the phone?

Of course

flashing TWRP via Odin will trigger Knox 0x1 then no warranty

cilmanalo · Aug 21, 2016

Yuen.Jason22 said:
Of course flashing TWRP via Odin will trigger Knox 0x1 then no warranty

Oh that's unfortunate. Will flash after warranty then haha

[RECOVERY][TWRP][J510][ROOT] TWRP 3.0.2 for Samsung Galaxy J5(2016)

Senior Member

Attachments

Senior Member

Senior Member

Senior Member

Senior Member

Attachments

Senior Member

Member

Senior Member

Member

Senior Member

Member

Member

Senior Member

Senior Member

Member

Senior Member

Member

Member

Senior Member

Member

Similar threads

Top Liked Posts