[Read OP First] Official ViPER4Android Audio Profiles

Search This thread

Morgrain

Senior Member
Aug 4, 2015
1,129
1,312
Hi,

i am attaching my files, included latest XM3 profile.

Select XM3 V2.

I just downloaded the files and copied the presets to my phone. I also have the Pixel 4 XL and the Sony XM3. I just wondered that you deactivated VIPER clarity and auditory system protection bei default, even though it seems to be configured. Is that right?

Thank you by the way for the awesome preset. It sound wonderful. I like it very much. I am still amazed that the Sony XM3 can produce such a kind of good sound.
 
Last edited:

EzerchE

Senior Member
Jan 31, 2013
308
68
Istanbul
I just downloaded the files and copied the presets to my phone. I also have the Pixel 4 XL and the Sony XM3. I just wondered that you deactivated VIPER clarity and auditory system protection bei default, even though it seems to be configured. Is that right?

Thank you by the way for the awesome preset. It sound wonderful. I like it very much. I am still amazed that the Sony XM3 can produce such a kind of good sound.

Hello, thank you and i am glad you have liked it. My latest profile has Clarity activated. But i have deactivated Auditory system protection.

Master limiter: On
Viper-DDC: On / Headset correction: Sony MDR-E888
Convolver: On / Impulse response: TubeAmplifier & Technics Preamp Extreme v.2 / Cross Channel 0% (Be careful! High volume! Lower the volume before activating this.)
Dynamic system: On / Device type: High-end headphone(v2) / Dynamic bass strength: 20%
Viper bass: On / Bass mode: Pure bass+ / Bass frequency: 50Hz / Bass gain: 6dB
Viper clarity: On / Clarity mode: Natural / Clarity gain: 10dB

Optional;
Field Surround: On / Surround Strength: 1 / Mid image strength: 6
Headphone surround +: On / Level 1
Reverbation: On / Room size: 25m2 / Sound field: 5m / Damping factor: 0% / Wet Signal: 0% / Dry signal: 50%


Enjoy!
 
Last edited:

Morgrain

Senior Member
Aug 4, 2015
1,129
1,312
Hello, thank you and i am glad you have liked it. My latest profile has Clarity activated. But i have deactivated Auditory system protection.

Master limiter: On
Viper-DDC: On / Headset correction: Sony MDR-E888
Convolver: On / Impulse response: TubeAmplifier & Technics Preamp Extreme v.2 / Cross Channel 0%
Field Surround: On / Surround Strength: 1 / Mid image strength: 6
Headphone surround +: On / Level 1
Reverbation: On / Room size: 25m2 / Sound field: 5m / Damping factor: 0% / Wet Signal: 0% / Dry signal: 50%
Dynamic system: On / Device type: High-end headphone(v2) / Dynamic bass strength: 20%
Viper bass: On / Bass mode: Pure bass+ / Bass frequency: 50Hz / Bass gain: 6dB
Viper clarity: On / Clarity mode: Natural / Clarity gain: 10dB

enjoy!

Interesting preset. But I am not sure if I like it. The reverberation is a bit annoying/strange. I like clear and neutral/a bit vocal heavy music and the preset V 2.0 fit that better I think. Even though with the new preset I can differentiate much better between music instruments.
 

EzerchE

Senior Member
Jan 31, 2013
308
68
Istanbul
Interesting preset. But I am not sure if I like it. The reverberation is a bit annoying/strange. I like clear and neutral/a bit vocal heavy music and the preset V 2.0 fit that better I think. Even though with the new preset I can differentiate much better between music instruments.

Hi, field surround, headphone surround and reverb are optional for sure :)
 

BigCountry82

Member
Jan 24, 2018
7
2
don't know where else to post and I hope I'm in the right place. Sorry if I'm not.

I got a note 10 plus (snapdragon) locked bootloader as of now. I hope that changes. I've looked and looked and thus far I have to flash V4A but stock rom and no root available is there anyway possible i can get V4A?

If not what are the next best recommendations because NOTHING on Google play compares !

Thank you in advance!!
 

DR4LUC0N

Senior Member
Jun 1, 2014
125
43
Google Pixel 6 Pro
don't know where else to post and I hope I'm in the right place. Sorry if I'm not.

I got a note 10 plus (snapdragon) locked bootloader as of now. I hope that changes. I've looked and looked and thus far I have to flash V4A but stock rom and no root available is there anyway possible i can get V4A?

If not what are the next best recommendations because NOTHING on Google play compares !

Thank you in advance!!

There is no way to get V4A on your device. My suggestion is to not buy Samsung if you want better sound from here on out. They have been locking down their devices. I gave up on Samsung and it's been the best move I've made.

Next best option might be power Amp? I know it has a equalizer and bass/tone knobs when I used it like 5 years ago.
 

edbassman23

Senior Member
Jan 19, 2015
213
44
There is no way to get V4A on your device. My suggestion is to not buy Samsung if you want better sound from here on out. They have been locking down their devices. I gave up on Samsung and it's been the best move I've made.



Next best option might be power Amp? I know it has a equalizer and bass/tone knobs when I used it like 5 years ago.
Just unlock and root Your phone. By the way 10+ it's great phone.

Wysłane z mojego SM-N975F przy użyciu Tapatalka
 

Morgrain

Senior Member
Aug 4, 2015
1,129
1,312
Hi, field surround, headphone surround and reverb are optional for sure :)

I have been using your preset with surround/reverb for a few weeks now and I think I like it better than the version without it. Thanks again for the awesome preset, Mozart or Rammstein sound truly wonderful on my XM3 now.
 

topbasework

Senior Member
Oct 25, 2011
644
107
Hello, thank you and i am glad you have liked it. My latest profile has Clarity activated. But i have deactivated Auditory system protection.

Master limiter: On
Viper-DDC: On / Headset correction: Sony MDR-E888
Convolver: On / Impulse response: TubeAmplifier & Technics Preamp Extreme v.2 / Cross Channel 0% (Be careful! High volume! Lower the volume before activating this.)
Dynamic system: On / Device type: High-end headphone(v2) / Dynamic bass strength: 20%
Viper bass: On / Bass mode: Pure bass+ / Bass frequency: 50Hz / Bass gain: 6dB
Viper clarity: On / Clarity mode: Natural / Clarity gain: 10dB

Optional;
Field Surround: On / Surround Strength: 1 / Mid image strength: 6
Headphone surround +: On / Level 1
Reverbation: On / Room size: 25m2 / Sound field: 5m / Damping factor: 0% / Wet Signal: 0% / Dry signal: 50%

Enjoy!


Hai r u have profile bass boost for AKG Samsung S10
 

EzerchE

Senior Member
Jan 31, 2013
308
68
Istanbul
I have been using your preset with surround/reverb for a few weeks now and I think I like it better than the version without it. Thanks again for the awesome preset, Mozart or Rammstein sound truly wonderful on my XM3 now.

I am glad you like it. Me too, i am using it without reverb effects.

Hai r u have profile bass boost for AKG Samsung S10

No i dont have it sorry, but you can give it a chance to XM3 profile :)


I am glad you like it
 

ffchampmt

Senior Member
Dec 27, 2013
408
151
Montana
Here's are some setups for Sony Wh-1000xm3. Light processing and still pretty warm. Feedback appreciated.

Sent from my crosshatch using XDA Labs
 
  • Like
Reactions: mkr2511

dumakos

Senior Member
Jul 22, 2010
62
5
Thessaloniki
Hello to everyone
I've ordered the ''Anker soundcore life q20'' bluetooth headset (the price was very good),so i ask if anyone here own this headset and would like to share his settings.
Thanks in advance.
 
  • Like
Reactions: DarcyHart

Top Liked Posts

  • There are no posts matching your filters.
  • 125
    If you want to share at another forum, PM me to request maintainer permission.​
    V4Arena Facebook Chat Room(Please join!): www.facebook.com/groups/v4a.en
    Original ViPER520 Post: https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/543409_545378615533820_1857812272_n.png/

    OP Index:
    1. Information
    2. Personal Profiles
    3. Setting a Profile


    v4aofficial.jpg

    Purpose: Have you found an amazing profile setup for music and want to share? This is the Place!

    Notice: For those who think uploading the profile file will be easier. Your right, it would be easier. Most likely though, using this file from device to device will not function properly. Therefore, just share the way asked.

    To share simply make a post in this format:

    If a feature is not being used go ahead and leave it out.

    FX:

    1. MASTER POWER:
    (ii) Force Enable V4A
    2. PLAYBACK CONTROL GAIN:
    (ii) Select Effect Strength:
    (iii) Max Gain:
    (iv) Max Output:
    3. VIPER-DDC:
    (ii) Listening Device:
    4. SPECTRUM EXTENSION:
    (ii) Strength:
    5. FIREQUALIZER:
    (ii) Select Preset:
    6. CONVOLVER:
    (ii) Impulse Response:
    (iii) Cross Chanel
    7. FIELD SURROUND:
    (i) Select Field Surround Strength:
    (ii) Select Mid Image Strength:
    8. DIFFERENTIAL SURROUND:
    (i) Select Delay Time:
    9. HEADPHONE SURROUND +:
    (i) Select Effect Quality:
    10. REVERBERATION:
    (i) Room Size:
    (ii) Sound Field:
    (iii) Damping Factor:
    (iv) Wet Signal:
    (v) Dry Signal:
    11. DYNAMIC SYSTEM:
    (i) Select Listening Device:
    (ii) Select Dynamic Bass:
    12. TUBE SIMULATOR (6N1J):
    13. FIDELITY CONTROL:

    (i) Enable ViPER Bass:
    Select Bass Mode:
    Select Bass Frequency:
    Select Bass Boost:
    (ii) Enable ViPER Clarity:
    Select Clarity Mode:
    Select Clarity:
    14. AUDITORY SYSTEM PROTECTION:
    (ii) Select Binaural Level:
    15. MASTER GATE (Limiter):
    (i) Output Gain:
    (ii) Channel Pan:
    (iii) Limit Threshold:
    See Personal Profiles below for a hint of what to do!


    Download V4A FX & XHiFi
    Note: This product is completely free, of course, you can donate to ViPER520(creator) or zhuhang.
    Make sure you are connected to internet when installing V4A. So we can calculate number of installations. Thanks.
    Refer to the Official Thread HERE to install and troubleshoot.
    104
    Personal Profiles // Carnage Profiles

    Personal Profiles
    Here are some awesome Profiles from zhuhang and I!

    My Profile:
    Carnage 4.1

    For a clearly amazing experience with your music!
    Code Name: Twinkle


    Made with ATH-M50 // M50x
    FX:

    1. MASTER POWER:
    (ii) Force Enable V4A:
    2. PLAYBACK CONTROL GAIN:
    (ii) Select Effect Strength: Slight
    (iii) Max Gain: 4x
    (iv) Max Output: 0 dB
    3. VIPER-DDC:
    (ii) Listening Device:
    4. SPECTRUM EXTENSION:
    (ii) Strength:
    5. FIREQUALIZER:
    (ii) Select Preset: Custom
    Custom Equalixer FX:
    +3.1, +2.5, +1.5, +0.8, +1.3, +2.0, +1.6, +1.1, +2.2, +2.8
    6. CONVOLVER:
    (ii) Impulse Response:
    (iii) Cross Chanel:
    7. FIELD SURROUND:
    (i) Select Field Surround Strength:
    (ii) Select Mid Image Strength:
    8. DIFFERENTIAL SURROUND:
    (i) Select Delay Time:
    9. HEADPHONE SURROUND +:
    (i) Select Effect Quality:
    10. REVERBERATION:
    (i) Room Size:
    (ii) Sound Field:
    (iii) Damping Factor:
    (iv) Wet Signal:
    (v) Dry Signal:
    11. DYNAMIC SYSTEM:
    (i) Select Listening Device: Extreme Headphone (v2)
    (ii) Select Dynamic Bass: 9 Percent
    12. TUBE SIMULATOR (6N1J):
    13. FIDELITY CONTROL:

    (i) Enable ViPER Bass:✔
    Select Bass Mode: Natural
    Select Bass Frequency: 80 Hz
    Select Bass Boost: 8.0 dB
    (ii) Enable ViPER Clarity:✔
    Select Clarity Mode: Natural
    Select Clarity: 6.0 dB
    14. AUDITORY SYSTEM PROTECTION:
    (ii) Select Binaural Level:
    15. MASTER GATE (Limiter):
    (i) Output Gain: -6.0 dB
    (ii) Channel Pan: 0.5 : 0.5
    (iii) Limit Threshold: 0 dB

    Made with JVC HA-FX30 (The Original Carnage Profile)
    FX:

    1. MASTER POWER:
    (ii) Force Enable V4A:
    2. PLAYBACK CONTROL GAIN:
    (ii) Select Effect Strength: Moderate
    (iii) Max Gain: 2x
    (iv) Max Output: 0 dB
    3. VIPER-DDC:
    (ii) Listening Device:
    4. SPECTRUM EXTENSION:
    (ii) Strength:
    5. FIREQUALIZER:
    (ii) Select Preset: Custom
    Custom Equalixer FX:
    +3.0, +1.5, +1.0, +1.6, +1.4, +2.1, +2.9, +2.3, +3.8, +2.5
    6. CONVOLVER:
    (ii) Impulse Response:
    (iii) Cross Chanel:
    7. FIELD SURROUND:
    (i) Select Field Surround Strength:
    (ii) Select Mid Image Strength:
    8. DIFFERENTIAL SURROUND:
    (i) Select Delay Time:
    9. HEADPHONE SURROUND +:
    (i) Select Effect Quality:
    10. REVERBERATION:
    (i) Room Size:
    (ii) Sound Field:
    (iii) Damping Factor:
    (iv) Wet Signal:
    (v) Dry Signal:
    11. DYNAMIC SYSTEM:
    (i) Select Listening Device: Common Earphone (v2)
    (ii) Select Dynamic Bass: 14 Percent
    12. TUBE SIMULATOR (6N1J):
    13. FIDELITY CONTROL:

    (i) Enable ViPER Bass:✔
    Select Bass Mode: Natural
    Select Bass Frequency: 66 Hz
    Select Bass Boost: 3.5 dB
    (ii) Enable ViPER Clarity:✔
    Select Clarity Mode: Natural
    Select Clarity: 6.0 dB
    14. AUDITORY SYSTEM PROTECTION:
    (ii) Select Binaural Level:
    15. MASTER GATE (Limiter):
    (i) Output Gain: 0 dB
    (ii) Channel Pan: 0.5 : 0.5
    (iii) Limit Threshold: 0 dB

    Made with JVC HA-FR37
    FX:

    1. MASTER POWER:
    (ii) Force Enable V4A:
    2. PLAYBACK CONTROL GAIN:
    (ii) Select Effect Strength: Slight
    (iii) Max Gain: 3x
    (iv) Max Output: -1.0 dB
    3. VIPER-DDC:
    (ii) Listening Device:
    4. SPECTRUM EXTENSION:
    (ii) Strength:
    5. FIREQUALIZER:
    (ii) Select Preset: Custom
    Custom Equalixer FX:
    +3.0, +1.9, +1.3, +1.6, +1.4, +2.2, +1.7, +0.7, +1.4, +0.8
    6. CONVOLVER:
    (ii) Impulse Response:
    (iii) Cross Chanel:
    7. FIELD SURROUND:
    (i) Select Field Surround Strength:
    (ii) Select Mid Image Strength:
    8. DIFFERENTIAL SURROUND:
    (i) Select Delay Time:
    9. HEADPHONE SURROUND +:
    (i) Select Effect Quality:
    10. REVERBERATION:
    (i) Room Size:
    (ii) Sound Field:
    (iii) Damping Factor:
    (iv) Wet Signal:
    (v) Dry Signal:
    11. DYNAMIC SYSTEM:
    (i) Select Listening Device: Common Earphone (v2)
    (ii) Select Dynamic Bass: 1 Percent
    12. TUBE SIMULATOR (6N1J):
    13. FIDELITY CONTROL:

    (i) Enable ViPER Bass:✔
    Select Bass Mode: Natural
    Select Bass Frequency: 66 Hz
    Select Bass Boost: 8.0 dB
    (ii) Enable ViPER Clarity:✔
    Select Clarity Mode: Natural
    Select Clarity: 6.0 dB
    14. AUDITORY SYSTEM PROTECTION:
    (ii) Select Binaural Level: Slight
    15. MASTER GATE (Limiter):
    (i) Output Gain: -3.0 dB
    (ii) Channel Pan: 0.5 : 0.5
    (iii) Limit Threshold: 0 dB

    Made with Logitech S715i
    FX:

    1. MASTER POWER:
    (ii) Force Enable V4A:
    2. PLAYBACK CONTROL GAIN:
    (ii) Select Effect Strength:
    (iii) Max Gain:
    (iv) Max Output: 0 dB
    3. VIPER-DDC:
    (ii) Listening Device:
    4. SPECTRUM EXTENSION:
    (ii) Strength:
    5. FIREQUALIZER:
    (ii) Select Preset: Custom
    Custom Equalixer FX:
    +1.9, +1.6, +2.1, +3.0, +3.2, +4.3, +3.9, +4.6, +5.0, +3.7
    6. CONVOLVER:
    (ii) Impulse Response:
    (iii) Cross Chanel:
    7. FIELD SURROUND:
    (i) Select Field Surround Strength:
    (ii) Select Mid Image Strength:
    8. DIFFERENTIAL SURROUND:
    (i) Select Delay Time:
    9. HEADPHONE SURROUND +:
    (i) Select Effect Quality:
    10. REVERBERATION:
    (i) Room Size:
    (ii) Sound Field:
    (iii) Damping Factor:
    (iv) Wet Signal:
    (v) Dry Signal:
    11. DYNAMIC SYSTEM:
    (i) Select Listening Device:
    (ii) Select Dynamic Bass:
    12. TUBE SIMULATOR (6N1J):
    13. FIDELITY CONTROL:

    (i) Enable ViPER Bass:✔
    Select Bass Mode: Natural
    Select Bass Frequency: 66 Hz
    Select Bass Boost: 6.0 dB
    (ii) Enable ViPER Clarity:✔
    Select Clarity Mode: Natural
    Select Clarity: 8.0 dB
    14. AUDITORY SYSTEM PROTECTION:
    (ii) Select Binaural Level:
    15. MASTER GATE (Limiter):
    (i) Output Gain: 0 dB
    (ii) Channel Pan: 0.5 : 0.5
    (iii) Limit Threshold: -1.9 dB




    Please Note: The Profiles below this are for Reference.

    zhuhang's Profiles
    Extreeme Clarity Profile (V4A FX & XHiFi Co-exists) - Headset Only

    FX:

    1. Master Power: ✔
    2. Playback Gain Control: ✔
    (ii) Select Effect Strength: Slight //Moderate
    (iii) Max Gain: 4x //8x
    (iv) Max Output: -1.9dB
    3. FIR Equalizer: ✔
    (ii) Select Preset: Acoustic*
    4. Convolver: ✔
    (ii) Impulse Response: Sony Xperia Clear Audio+ Try: SPL GoldMike Impulse w Flair//DBX//JoeMeek *PopEQ
    5. Field Surround: ✘
    6. Reverberation: ✘
    7. Dynamic System: ✘
    (iv) Tube Simulator(6N1J): ✘
    8. Auditory System Protection (Cure Tech+): ✔
    (ii) Select Binaural Level: Moderate

    XHIFI:
    1. Master Power: ✔
    2. Playback Gain Control: ✘
    3. FIR Equalizer: ✔
    (ii) Select Preset: Vocal Boost**
    4. Audio Reconstruction: ✔
    (ii) Hi Clarity: 100**
    (iii) Lo Contour: 70*
    * Adjust to your desired bass level
    ** Adjust to your desired vocal level
    ExplOOit Bass Profile (V4A FX & XHiFi Co-exists) - Headset Only

    FX:

    1. Master Power: ✔
    2. Playback Gain Control: ✔
    (ii) Select Effect Strength: Slight //Moderate
    (iii) Max Gain: 4x //8x
    (iv) Max Output: -1.9dB
    3. FIR Equalizer: ✔
    (ii) Select Preset: Acoustic*
    4. Convolver: ✔
    (ii) Impulse Response: Sony Xperia Clearbass Try: PopEQ
    5. Field Surround: ✘
    6. Reverberation: ✘
    7. Dynamic System: ✔
    (ii) Select Listening Device: Common Earphone(v2)*
    (iii) Select Dynamic Bass: 100 Percent*
    (iv) Tube Simulator(6N1J): ✘
    8. Auditory System Protection (Cure Tech+): ✔
    (ii) Select Binaural Level: Slight

    XHIFI:
    1. Master Power: ✔
    2. Playback Gain Control: ✘
    3. FIR Equalizer: ✔
    (ii) Select Preset: Bass Boost**
    4. Audio Reconstruction: ✔
    (ii) Hi Clarity: 80**
    (iii) Lo Contour: 100*
    * Adjust to your desired bass level
    ** Adjust to your desired vocal level


    Others will not be added if requested! Just post to share. Enjoy the Profiles!​
    51
    Enhanced Clarity Pure Bass+ 2.0

    My Profile: Enhanced Clarity Pure Bass+ 3.0
    For a stunning all-in-one (dance, acoustic, rock, metal, alternative, techno, house, hip hop, etc.) and beautifully clear, pure bass, and quality audio experience used with: Headphones/Earpiece/Auxillary

    FX:
    1. Master Power: ✔
    2. Playback Gain Control: ✘

    3. FIREqualizer: ✔
    -Select Preset: Custom
    –[-2.5] [+2.0] [+6.0] [+3.0] [+0.0] [+0.0] [+0.0] [+3.5] [+1.5] [-3.5]
    4. Convolver: ✔
    -Impulse Response: Dolby Pro Logic II.irs
    -Cross Channel: 0
    5. Field Surround: ✘
    6. Differential Surround: ✘
    7. Headphone Surround +: ✘
    8. Reverberation: ✘
    9. Dynamic System: ✘
    10. Fidelity Control: ✔

    -Enable ViPER Bass: ✔
    –Select Bass Mode: Pure Bass+
    –Select Bass Frequency: 80 Hz
    –Select Bass Boost: 10.0 dB

    -Enable ViPER Clarity: ✔
    –Select Clarity Mode: OZone+
    –Select Clarity: 12.0 dB

    11. Auditory System Protection (Cure Tech+): ✔
    -Select Binaural Level: Extreme
    12. Master Gate (Limiter)
    -Output Gain: 2.9 dB
    -Channel Pan: 0.5 : 0.5 dB
    -Limit Threshold: -1.0 dB

    XHiFi:
    1. Master Power: ✔
    2. Playback Gain Control: ✘
    3. FIREqualizer: ✘

    4. Audio Reconstruct: ✔
    -Hi Clarity: 70
    -Lo Contour: 50
    5. Master Gate (Limiter): ✘


    Credits:
    -@BSDgeek_Jake for Dolby Pro Logic II.IRS in this thread.
    40
    How to set an Audio Profile

    How to Set an Audio Profile

    Step by Step:
    1. Find the Profile you would like to use.
    2. Download V4A FX and/or XHiFi
    3. Open either app and switch to the device the profile uses.
    4. Enter all that you see on the profile.
    5. Enjoy the amazing sound!
    25
    Rx Pain Killers

    Here I present my new creation, a set of 3 profiles I call "Pain Killers"

    There are 3 settings: Morphine, Oxycontin and Percocet. ;)
    Remember, "Dont mix your pills or else" :p

    To use them, just leave everything default and apply VDC and IRS accordingly.
    Tested them myself in 3 different set of earphones: Piston v2, SONY MDR-EX90 LP and Westone 3 and I loved the sound coming from them (specially the second profile).

    Thanks for trying them and I hope you enjoy them as much as I did making them. :good:

    The files are attached below, enjoy them and please thank the post if you appreciate my work.