Adventures in trying to get Phone calls

Search This thread

calin75

Senior Member
Mar 6, 2008
467
35
Miami
I was able to install an euro firmware. It is also only connecting to edge.

Edit.

I did it!! I have the phone icon on my screen!!!
 
Last edited:

calin75

Senior Member
Mar 6, 2008
467
35
Miami
IMG_20101112_201828.jpg

IMG_20101112_201855.jpg

Yeah Baby!! It's done and official!
 

calin75

Senior Member
Mar 6, 2008
467
35
Miami
Just flash the EURO firmware version. But now I am only getting EDGE. Of course I also need a new SIM with voice and data. The hardware is there guys!! Now I only need to unlock this puppy.
 
  • Like
Reactions: IronMonk

Jyveafk

Senior Member
Jan 2, 2009
177
26
Well, most of the info came from;
http://xdaforums.com/showthread.php?t=827853&page=3
post 23.

I just started from a different version as I wasn't able to dial the keypad to find out what I currently had installed.

I'm still not sure if the phone.apk's would have worked, think I was doing it wrong, but many thanks to people who posted theirs. If that does work, it'd be far easier and less 'omg I think I've just trashed it' moments.

So..
After a few moments of the Android restore shell, the download screen, and the 'phone-!-computer' screen (which as it turns out isn't anything to worry about, you can still connect up using odin to flash).

Download Odin3 v1.70
do some googling for;
P1000XXJHA
for the base rom.
Used;
P1_20100909.pit
for formating. Selected 'Repartition' 'AutoReboot' 'fResetTime'. That rebooted with nothing.
Then, unchecked the 'repartion' part (as the structure is setup, don't want to screw it up, the next flashing needs to 'drop in' where the structure is.

Then, loading into the JHA.rar, flashed that and rebooted.
After some power off/on/off/on again, it's back to being usuable (previous to this, all my other attempts were locking it up at various screens).
The Phone icon WAS visible, but unable to make phone calls.

Now... I was a bit rash here, I also flashed P1000OXAJK1.tar (Repartion set to OFF!) to upgrade, AND I swapped sims to my known working Sim card.

At this point, it rebooted, showed 'Emergency Calls only'
Went into the wireless/Mobile Settings/NetworkOperators and made sure it was connected to TMobile. That that point, I made my first call and it worked.
Received a call too, also working.

Everything else 'appears' to be working apart from the browsing which looks like some APN setting. Every page I'm trying to access takes me to the Tmobile site. I need to set something/have something set I guess. The settings /look/ right, but can't get to non-tmobile if I'm not using wireless.

Though it also looks like I'm not getting much signal too. 1 bar tops (sure I was getting 3 before flashing) so guess there's some issues with the radio. Don't know what todo about that. Not showing the '3', just 'e' when I'm connecting up too. (-107dBm, 3asu, network type : edge)

The settings/about shows 'phone' information, not 'tablet' information as it did before too.

Overall though, it's working ok. Once I get the 3g browsing sorted, it'll be perfect.
 
Last edited:
  • Like
Reactions: IronMonk

ayman07

Senior Member
Feb 25, 2010
1,031
441
Can we compare the system files between the euro firmware and the US firmware? I mean if the only difference is the phone.apk or if there are other things, I'm sure we can just push them to a rooted tab and be done with this.

Sent from my Samsung Galaxy Tab using XDA App
 

Jyveafk

Senior Member
Jan 2, 2009
177
26
That'd be great. Would have loved to swap in those .apk's posted earlier, but I'd /just/ started flashing at that point.
 

samsci

Senior Member
Sep 8, 2009
134
1
Atlanta
Well, most of the info came from;
http://xdaforums.com/showthread.php?t=827853&page=3
post 23.

I just started from a different version as I wasn't able to dial the keypad to find out what I currently had installed.

I'm still not sure if the phone.apk's would have worked, think I was doing it wrong, but many thanks to people who posted theirs. If that does work, it'd be far easier and less 'omg I think I've just trashed it' moments.

So..
After a few moments of the Android restore shell, the download screen, and the 'phone-!-computer' screen (which as it turns out isn't anything to worry about, you can still connect up using odin to flash).

Download Odin3 v1.70
do some googling for;
P1000XXJHA
for the base rom.
Used;
P1_20100909.pit
for formating. Selected 'Repartition' 'AutoReboot' 'fResetTime'. That rebooted with nothing.
Then, unchecked the 'repartion' part (as the structure is setup, don't want to screw it up, the next flashing needs to 'drop in' where the structure is.

Then, loading into the JHA.rar, flashed that and rebooted.
After some power off/on/off/on again, it's back to being usuable (previous to this, all my other attempts were locking it up at various screens).
The Phone icon WAS visible, but unable to make phone calls.

Now... I was a bit rash here, I also flashed P1000OXAJK1.tar (Repartion set to OFF!) to upgrade, AND I swapped sims to my known working Sim card.

At this point, it rebooted, showed 'Emergency Calls only'
Went into the wireless/Mobile Settings/NetworkOperators and made sure it was connected to TMobile. That that point, I made my first call and it worked.
Received a call too, also working.

Everything else 'appears' to be working apart from the browsing which looks like some APN setting. Every page I'm trying to access takes me to the Tmobile site. I need to set something/have something set I guess. The settings /look/ right, but can't get to non-tmobile if I'm not using wireless.

Though it also looks like I'm not getting much signal too. 1 bar tops (sure I was getting 3 before flashing) so guess there's some issues with the radio. Don't know what todo about that. Not showing the '3', just 'e' when I'm connecting up too. (-107dBm, 3asu, network type : edge)

The settings/about shows 'phone' information, not 'tablet' information as it did before too.

Overall though, it's working ok. Once I get the 3g browsing sorted, it'll be perfect.




First setup the structure, then flashed the JHA file and that


Just throwing this out there, but could it be the radio version that is on the tab that is causing the issue? Wondering if upgrading the radio to a different version would work?
 

jeebspawnshop

Senior Member
Feb 6, 2008
1,380
1,127
Try *#2263#

Then try enable all the bands manually, and hit me back.

PS: Don't worry, you can't do any damage to your phone through this menu ;)
 

xexes

Senior Member
Nov 6, 2010
112
4
thanks again Jyveafk.... so basically you flashed the European JK1 firmware and went from there...

Unfortunately for me, I may need a little more info on downloading Odin, etc... or perhaps the tmo guy who's been most helpful can help me... I don't really follow all of the steps.... and when you say you "got a bit rash"... are those things that should be done by us as well?

And you used a Sim card with known voice and data on it? The tmo guy told me he didn't think that was necessary ... he said as long as I have voice on my plan, which I do, that the Sim card has nothing to do with it... but it appears as if it does?

also, pls let us know about the edge issues, etc... it sounds as if you will get them resolved...

good going! and thanks so much for posting.... sorry I have so many questions, buy my programming days are long in the past and I'm new to Android, so trying to piece it all together!
 
Last edited:

ConceptVBS

Senior Member
Jun 28, 2010
471
6
SUCCESS!!!

We have a working Tmobile US Galaxy Tab making/receiving phone calls.

Off for a coffee, will write everything up in a mo.

Someone want to let Engadget/Gizmodo know!?

I'm not sure if that is a good idea. We dont want T-Mobile or other carriers know about this loophole. What if they specifically block all the devices through IMEI?
That would be bad.
 

xexes

Senior Member
Nov 6, 2010
112
4
Well, then they're going to get a lot of returned Tabs... cus I won't keep it if I can't use it as a phone in the US. I'm sure they'll find out about it... and frankly, they'll make more money, so they probably won't complain too much.
 

ayman07

Senior Member
Feb 25, 2010
1,031
441
I went ahead and pushed all the files from the dropbox and nothing changed except for the fact that I lost all radio functionality. The phone app wasn't there either. Oh well, guess this isn't the solution.

Sent from my Samsung Galaxy Tab
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Just flash the EURO firmware version. But now I am only getting EDGE. Of course I also need a new SIM with voice and data. The hardware is there guys!! Now I only need to unlock this puppy.
    1
    Well, most of the info came from;
    http://xdaforums.com/showthread.php?t=827853&page=3
    post 23.

    I just started from a different version as I wasn't able to dial the keypad to find out what I currently had installed.

    I'm still not sure if the phone.apk's would have worked, think I was doing it wrong, but many thanks to people who posted theirs. If that does work, it'd be far easier and less 'omg I think I've just trashed it' moments.

    So..
    After a few moments of the Android restore shell, the download screen, and the 'phone-!-computer' screen (which as it turns out isn't anything to worry about, you can still connect up using odin to flash).

    Download Odin3 v1.70
    do some googling for;
    P1000XXJHA
    for the base rom.
    Used;
    P1_20100909.pit
    for formating. Selected 'Repartition' 'AutoReboot' 'fResetTime'. That rebooted with nothing.
    Then, unchecked the 'repartion' part (as the structure is setup, don't want to screw it up, the next flashing needs to 'drop in' where the structure is.

    Then, loading into the JHA.rar, flashed that and rebooted.
    After some power off/on/off/on again, it's back to being usuable (previous to this, all my other attempts were locking it up at various screens).
    The Phone icon WAS visible, but unable to make phone calls.

    Now... I was a bit rash here, I also flashed P1000OXAJK1.tar (Repartion set to OFF!) to upgrade, AND I swapped sims to my known working Sim card.

    At this point, it rebooted, showed 'Emergency Calls only'
    Went into the wireless/Mobile Settings/NetworkOperators and made sure it was connected to TMobile. That that point, I made my first call and it worked.
    Received a call too, also working.

    Everything else 'appears' to be working apart from the browsing which looks like some APN setting. Every page I'm trying to access takes me to the Tmobile site. I need to set something/have something set I guess. The settings /look/ right, but can't get to non-tmobile if I'm not using wireless.

    Though it also looks like I'm not getting much signal too. 1 bar tops (sure I was getting 3 before flashing) so guess there's some issues with the radio. Don't know what todo about that. Not showing the '3', just 'e' when I'm connecting up too. (-107dBm, 3asu, network type : edge)

    The settings/about shows 'phone' information, not 'tablet' information as it did before too.

    Overall though, it's working ok. Once I get the 3g browsing sorted, it'll be perfect.
    1
    Has anyone started working on the CDMA version?
    1
    I am very sorry!

    I would like to make my Tmobile Tab to make call. But as I read through the instructions, I am not really sure how to follow them. Would anybody to help as to rewrite the instructions step by step.

    Thank you very much

    here is the steps you need to have voice+edge on the t-mobile tab (this is if you already own a Vibrant) http://xdaforums.com/showthread.php?t=876178
    1
    Hi,

    Is there a way to lower the loudspeaker volume, So that you can use the tab as a phone and the loudspeaker as an Ear Piece ? I've seen some people use it like this.

    When I put mine as low as possible, I still can not use it for private calls as its too loud.

    Thanks for your help.

    Ash.