[ROM][JellyBean][4.2.2]ParanoidAndroid 3.60 - Butter - MTD - Updated 6/15/13!

Search This thread

scott.hart.bti

Inactive Recognized Developer
Mar 19, 2012
2,561
17,384
Reading
Download link and changelog are at the bottom of the page!


GALLERY,

mako_5iscid.png



TUTORIAL,

untitled1unbtd.jpg


DONATIONS,

to molesarecoming
to D4rKn3sSyS
to jaybob413
to aaronpoweruser
Donate to scott.hart.bti

CREDITS,

AOSP/Google, Cyanogenmod, Goo, XDA, Krebsmilk, giannisgx89, Liquid,
AOKP, our users, supporters and donators, everyone who's helped us in the past,
heartfelt thanks to all of you!

LINKS,
Website: www.paranoid-rom.com
Github: www.github.com/paranoidandroid
Gerrit: review.paranoid-rom.com

BANNERS,

aospa_green_01xq18.png
aospa_green_146qv9.png

aospa_yellow_0h0rxo.png
aospa_yellow_1ukoes.png

aospa_cyan_05kpwq.png
aospa_cyan_1bxo8t.png

aospa_gray_0ctriy.png
aospa_gray_1kwp32.png



paranoid_instructions.png


Coming from Froyo(2.2) Gingerbread(2.3) or ICS(4.0)
  • Obtain CWM, this can be done using Jscotts Odin back to stock (Follow instructions use SGS kernal flasher to obtain CWM)
  • Run Qksters IMEI backup script here
  • Make certain you are on ICS, this can be done by flashing Entropy's CM9
  • CWM: Wipe Cache / Factory Reset
  • Install ROM: Scroll down for downloads sectoion
  • ...The package will start to install..
  • ...Phone will reboot into the install screen again...
  • ...Continue to install [Automatically] If not manually flash again
  • ...Phone will reboot again and be at the recovery screen...
  • Install Gapps
  • CWM: Wipe Cache Partition
  • CWM: Advanced/Wipe Dalvik Cache
  • Reboot

Coming from JB(4.1)
  • CWM: Wipe Cache / Factory Reset You should be fine without this step, but it is HIGHLY recommended as it makes certain all bugs are wiped clean.
  • Install ROM: Scroll down for downloads
  • Install Gapps
  • CWM: Wipe Cache Partition
  • CWM: Advanced/Wipe Dalvik Cache
  • Reboot

Downloads Section
Make Certain you read this ENTIRE post before Downloading... I know you didn't Go back and read it! :good:

Builds/ROMs:
GAPPS:

paranoid_changelog.png


ParanoidAndroid 3.15a - 4/6/2013 - Basic source update. Pulled newest and latest PA sources. Please check the PA page for their full changelog.

ParanoidAndroid 3.15 - 3/24/2013 - Basic source update. Pulled newest and latest PA sources. Please check the PA page for their full changelog.

ParanoidAndroid 3.10 - 3/4/2013 - Will update tomorrow... need sleep

ParanoidAndroid 3.0 - 2/20/13 - Take three... Another stability release... I told you guys there was a lot of working that needed to be put into this to get it working correctly on our device. Fixed APN force close. Fixed Wifi tether. May have fixed USB tether (let me know). Fixed FC when selecting USB connections from settings - storage. Added CPU boosting. Fixed tethering issues on startup. Added storage manager to tablet mode (able to use USB correctly). pulled latest PA source code.

ParanoidAndroid 3.0 - 2/20/13 - Take two... Stability release to fix issues from the initial 3.0 release. Fixed deep sleep issues, BT should now be functional, Fixed kernel to better work for an AOSP build. Stability changes made throughout the build to suite our device. Intentionally broke USB tethering for now.. Want to see if that is the cause of the couple of notification pull down freezing issues that have been reported.... For those of you that were having the issue, please let me know if you noticed any difference. Id suggest upgrading to this build as battery life should be improved.

ParanoidAndroid 3.0! - 2/18/13 - Thats right! Paranoidandroid is back to the infuse!! Based off AOSP 4.2.2 source. Huge thanks to the ParanoidAndroid team for this awesome beautiful piece of work that we were able to get working on our device. Words wont describe it, you need to flash this to experience it for yourself! - Everything should be working for the most part... There were alot of changes/patches i needed to add in order to get this working on our device. As of now, Bluetooth is completely busted. I havent looked at it much, but it shouldnt be to tough to fix. Ill get working on that tomorrow. Do not use this if you need to use bluetooth!!!!

ParanoidAndroid - 11/18 - For those of you that were reporting issues (reboots) from the previous build, this is an update for you. Download and Flash this Kernel. I reverted some of the minor changes that more then likely caused the trouble. I have no idea why some of you were having horrible problems and why some of you were not, but i guess that pretty much indicates how horribly F'ed our kernel is and that the smallest freaking change causes havoc for some users. Going forward, im not even touching the kernel or looking into changing anything kernel wise unless its a standard cm change for ALL samsung kernels.

ParanoidAndroid - 11/04 - First and foremost... Fixed my mistake that took away the 8mp option for camera... That is now back (thanks to everyone that pointed it out). Next... OC kernel has been migrated into main kernel. That means no more separete OC kernel. Just one kernel with 1400 and 1600 mhz steps. Now... With this option added, Please use caution using those levels and use common sense. If the phone reboots or you have any issue at 1600 and think that something is wrong with the build, please change frequency back down to stock 1200 and if it stops, then obviously oc isnt working good for you. DO NOT REPORT IT as a bug in the build! JT added an option into the cm source files that allows us to set long press actions from the lock screen. Its pretty neat... You can specify values such as flashlight control and media controls from the capacitive keys and to activate, just long press whichever button you set. That option can be found in settings - lockscreen. I optimized more of the kernel values (again) and gave us an extra 13 MB of RAM. I updated wifi drivers again. There have been a small number of reports that when the phone goes into deep sleep and then they wake, wifi does not reconnect. Im not sure if the wifi update fixed that or not, but if you happen to be one of the few that experience this issue, just download and use wifi fixer. I tested it with no issues or complaints. Updated kernel compression/decompression files. Added encryptable footer (fixes cryptofs errors in logcat). Enabled expandable desktop option. Few kernel changes/optimizations here and there. Merged latest PA/CM source code which includes alot of fixes for the color layout from paranoid android settings menu.

ParanoidAndroid - 10/28 - WOW! This seemed like a small update at first, but it got huge. Not only from changes on the source on our end, but also the changes on the PA side. Lets start off with the big things... The reboot into recovery when applying your settings issue has been FIXED. There is no longer an OC kernel... Why you ask? Because I added the OC options to the stock kernel and it is stable as before even when using the OC features. Added a few fixes device side for auto brightness (should make it a little better) and also camera. Reverted one or two questionable changes to ensure stability. Added a few changes on the kernel side to make dvfs code more efficient, fixes for wifi (only a couple minor ones.), update touchscreen driver, update kvm code to handle pages more efficiently. Corrected the camera preview/picture sizes (they seemed to be off before). Removed unused/unsupported code on device side. Added overlay config for the home key to unlock device feature to work correctly and the option is found from settings - lock screen - screen security - home unlock. Oh BTW.. latest PA source has been merged... They have been busy. They have added a new option to the Paranoid Preferences menu called 'Colors'.. It basically just automatically changes the status bar color for different apps you open. It is pretty neat. They have added a ton of other customizable features as well... Honestly... Im not sure what else they can come up with...

ParanoidAndroid - 10/22 - Will update in the morning... I need sleep right now. Download it and find out for now. :D

ParanoidAndroid - 10/19 - We now have Dock audio! Big thanks to araemo for getting dock audio working correctly. The dock audio feature can be found from settings - advanced - dock. Fixed the delayed capacitive keys... Very rarely sometimes when locking the phone, the screen would flicker back on and then capacitive keys would be delayed before becoming responsive. I claimed to have fixed it last build, but im almost certain that i definitely fixed them this time. I patched a few files in the kernel that were causing issues which should make the build even more stable (not that it wasnt before). Fixed an issue with our calibration driver not reading the correct file on boot up... It is now set to correct path and reads the file as it should. Pulled kernel wireless drivers from siyah kernel. This should improve wifi usage and get us a little more up to date with current sources (we still got a loooong way to go). Added ISO options to camera thanks to a commit from JT. Merged latest PA/CM source. Set up Goo.im, you can find me under devs - scotthartbti. I have modified the build.prop to accomplish OTA updates for next release.... And i think that about does it.

ParanoidAndroid - 10/14 - Updated build already? I think so! This build is mainly little bug fixes and missed things from the 4.1.2 source merge, but there are some key things from our device end that make it worth downloading. I optimized our kernel code a bit and freed up about 35 - 40 mb of RAM without sacrificing anything at all. I believe i have fixed the delayed response keys that would very intermittenly show up (most of u probably have never noticed), I have enabled installation of unknown apps by default (was tired of having to enable it everytime id restore from titanium)... I know there are a few other small things im missing, merged latest PA/CM source.

ParanoidAndroid - 10/11 - Android 4.1.2 is here and ready to go on the infuse! Please search for Android OS changes from 4.1.1 to 4.1.2 as im not going to list every single change they have made. I have fixed up the power HAL this build, should be fully functional now (Thanks araemo). Added zRam, which is enabled/disabled from settings - performance. Slight clean up in device tree. Made a change that should improve GPS lock time. Everyone that i had test it reported improvements.... remember, it may still take a minute or two for the initial lock, but after that it should be good to go, atleast it was for myself and the people who tested. Merged latest PA/CM source code. *** Previous GAPPs will work, no need to go searching for newer GAPPs.****

ParanoidAndroid - 10/5 - New partition layout to increase /system to 400mb to avoid any possible space issues. We previously had 350mb and we were cutting it very close! Added power HAL for our device and also added pulse boosting to the ondemand governor... Its pretty nice. Few minor fixes here and there. Lockscreen has a transparency option. Notification toggles have been added to notification list. Nav keys have customizable options added to them. Cleanup, bugs fixed. Merged latest PA source code. - PLEASE READ THIS BEFORE DOWNLOADING AND FLASHING!!!!: I had people test the following install and they left their external SD cards in the phone and had no issues, but if you do have an issue, remove external sdcard and try again. This latest build has been repartitioned so that /system is larger. system was previously 350mb and we were running out of space, so in order to avoid space issues, /system has been increased to 400mb. Now, since the partitions have changed, that means that they are going to wiped out and setup again when you flash the zip. This is going to cause the same behavior as the initial bml to mtd conversion flash. If you are on the previous MTD partitions, When you first flash, it will give you a warning message saying that your data will be erased in converting and you must flash again to and stop and you will see the dead android guy. This is just a warning message and is meant to be seen!!!. You will then need to flash again and this time it will start the conversion and then reboot into recovery and finish the conversion and then reboot into recovery again when it is finished. If you are on BML and converting to MTD for the first time, once you flash the package it will just start to install and reboot 2 times during the install process. When it comes back up the second time, you are finished and can proceed. You can then install GAPPs if needed or just boot up like normal. One last FYI... If you use an OC kernel, you need to use the newest one with the new partitions laid out or your gonna have some issue. Do NOT use old OC kernel on this new build.

ParanoidAndroid - 9/27 - Fixed Battery drain issue from 9/23 build that was removed. Fixed data indicator issue. Added support for suspend mode in charging, merged latest source - USB Tethering is now working thanks to thebecoming! Reverted a couple changes that i believe was causing issues for a couple people on last build, you guys should be good now. Added smartassv2 and interactive governors. Tweaked Conservative governor (thanks entropy). Cherry picked a commit for promixity sensor settings from phone - settings. Various upgrades to kernel. Merged latest PA source code.

ParanoidAndroid - 9/15 - Bunch of changes... Merged a bunch of aries changes that were previously overlooked.. Fixed the MMS issue that random people were having... araemo fixed torch.. it is now functioning perfectly and the torch app is included.. the other flashlight app has been removed. Thanks araemo! remapped search key to work with hardware key options... Updated the kernel bt drivers which in turn fixes the BT disconnect issue a few have reported.. merged latest PA source code... Updated to latest ParanoidPreferences.. A bunch of other things i forgot.

ParanoidAndroid - 9/6 - Paranoid Settings app has been giving an overhaul. They have added an extra option from the app. It gives you even more ability to completely customize things as you seem fit. Added LED flashlight app from market. It works as it should. PA wall papers have been added. Cleaned up the kernel code a bit... Nothing major. All latest PA source code has been merged. Few little things here and there.

ParanoidAndroid - 8/26 - Added OC kernel option to main page. Has 1400 and 1600 mhz steps. Seems pretty solid from stress testing and feedback from the test team. Give it a try. Cleaned up a little more of the source code in our tree, changed some of the MMS values in the overlay.

ParanoidAndroid - 8/25 - Not much physical change, but tons of changes/fixes to make things better. Now able to see Data Usage from settings menu. GPS locks crazy fast and is accurate as its supposed to be. Wifi Tether completely works. Quite a few kernel patches. Revamped the sensor code for our device. Added overlay to predefine a few apps such as MMS and Trebucet. Merged latest PA source code. You know you want this.

FYI... I am debating uploading my OC kernel i just created.. Frankly i dont think its needed and dont agree with it, but the people seem to want it and who am i to stop them.

ParanoidAndroid - 8/18 - This is not an official PA update, this is more of a personal fix things and make it better update. I have added 2 new layouts to the Paranoid Preferences configuration menu.. The option are now Stock, Hybrid, Phablet small, Phablet mid, Tablet small, and Tablet mid. Wifi tether is now partially working.. For whatever reason it doesnt work when you set security, but if you set it up as open, it works fine. Changed out the GPS script.. Users have reported faster lock times and more accurate location fixes. This was created by Marty331 and all credit goes to him. Merged the latest PA source code. Removed alot of the bloat files to make the zip package alot smaller then before and free up space. Enabled back to kill button. And a few other things i cant think of right now.

ParanoidAndroid - 8/15 - Jellybean ParanoidAndroid has begun! This has been compiled from CM10/ParanoidAndroid source code. This is a starting point for a ROM that is complicated as is... So you may run into an issue here or there. Enjoy!
Paranoid Android changelog

All of the source code for PA/CM builds can be found Here: My Github
 
Last edited:

vkumar2695

Senior Member
Apr 16, 2012
247
71
New York
Good stuff man :D

Edit:
DON'T flash FROM ANY SAMSUNG ICS OR ROMS BASED ON SAMSUNG KERNELS (my CM9, AOSP, etc)
Flash any stock GB rom with odin / or any GB kernel [instructions] root device [instructions] and reboot into recovery once again before flashing this
Is that necessary or will it work fine from an ICS rom?

Sent from my SGH-I997 using xda premium
 
Last edited:

pqrs

Senior Member
Dec 5, 2010
595
75
Eagle Id.
im getting "installation aborted"?status 7 if that means anything? i went back to gb and everything...
is the download supposed to say paranoid-note? doesnt look like the right download?
 

pqrs

Senior Member
Dec 5, 2010
595
75
Eagle Id.
im getting "installation aborted"?status 7 if that means anything? i went back to gb and everything...
is the download supposed to say paranoid-note? doesnt look like the right download?

i did have the wrong download... below the installation video is a link to the wrong rom.. might wanna remove that! im sure i wont be the only one to download it by mistake.
 

scott.hart.bti

Inactive Recognized Developer
Mar 19, 2012
2,561
17,384
Reading
i did have the wrong download... below the installation video is a link to the wrong rom.. might wanna remove that! im sure i wont be the only one to download it by mistake.

The correct link is right on the top before all their images... in big bold letters... saying download paranoidandroid infuse. honestly you may be the only one :)

Sent from my SGH-I997 using XDA
 

pqrs

Senior Member
Dec 5, 2010
595
75
Eagle Id.
hmmm... stuck at the galaxy screen now.. odin here i come! im not having much luck flashing this? i did it exactly like that video said, odin gb, flash, wipe, reboot.. stuck at galaxy screen. im trying again, ill let ya know how it goes! i hope i can get it working, i really want to try this!:good:
 

pqrs

Senior Member
Dec 5, 2010
595
75
Eagle Id.
odined back to gb again, did everything exactly like the video says and it sticks at the galaxy s screen, cant get into recovery, just stuck there. twice, exactly the same way?
i noticed that the gb i odined has red recovery, does that have something to do with it? i tried rebooting recovery to see if it would give me blue, but it just gets stuck at the boot screen and doesnt go back to recovery without odin..
 

DARKCHYLDX101

Senior Member
Jun 11, 2011
1,516
1,300
City of Sin
Its probably same installation instructions as unofficial cm9 since its cm9 based. Flash reboot stuck at Samsung 3 finger salute format data system cache reflash rom and gapps reboot enjoy.

Sent from my SGH-I997 using xda premium
 

pqrs

Senior Member
Dec 5, 2010
595
75
Eagle Id.
yeah... i cant 3 finger after installing it.. it just sits at the galaxy screen? i 3 finger and it reboots and sits at the screen again until i odin. going on my 5th try...
 

DARKCHYLDX101

Senior Member
Jun 11, 2011
1,516
1,300
City of Sin
Sweet cant wait to flash just installed Uniporn build 40 btw don't we need to flash hybrid apps with this rom also will it have the new play store with updated apps.

Sent from my SGH-I997 using xda premium
 

Top Liked Posts

  • There are no posts matching your filters.
  • 146
    Download link and changelog are at the bottom of the page!


    GALLERY,

    mako_5iscid.png



    TUTORIAL,

    untitled1unbtd.jpg


    DONATIONS,

    to molesarecoming
    to D4rKn3sSyS
    to jaybob413
    to aaronpoweruser
    Donate to scott.hart.bti

    CREDITS,

    AOSP/Google, Cyanogenmod, Goo, XDA, Krebsmilk, giannisgx89, Liquid,
    AOKP, our users, supporters and donators, everyone who's helped us in the past,
    heartfelt thanks to all of you!

    LINKS,
    Website: www.paranoid-rom.com
    Github: www.github.com/paranoidandroid
    Gerrit: review.paranoid-rom.com

    BANNERS,

    aospa_green_01xq18.png
    aospa_green_146qv9.png

    aospa_yellow_0h0rxo.png
    aospa_yellow_1ukoes.png

    aospa_cyan_05kpwq.png
    aospa_cyan_1bxo8t.png

    aospa_gray_0ctriy.png
    aospa_gray_1kwp32.png



    paranoid_instructions.png


    Coming from Froyo(2.2) Gingerbread(2.3) or ICS(4.0)
    • Obtain CWM, this can be done using Jscotts Odin back to stock (Follow instructions use SGS kernal flasher to obtain CWM)
    • Run Qksters IMEI backup script here
    • Make certain you are on ICS, this can be done by flashing Entropy's CM9
    • CWM: Wipe Cache / Factory Reset
    • Install ROM: Scroll down for downloads sectoion
    • ...The package will start to install..
    • ...Phone will reboot into the install screen again...
    • ...Continue to install [Automatically] If not manually flash again
    • ...Phone will reboot again and be at the recovery screen...
    • Install Gapps
    • CWM: Wipe Cache Partition
    • CWM: Advanced/Wipe Dalvik Cache
    • Reboot

    Coming from JB(4.1)
    • CWM: Wipe Cache / Factory Reset You should be fine without this step, but it is HIGHLY recommended as it makes certain all bugs are wiped clean.
    • Install ROM: Scroll down for downloads
    • Install Gapps
    • CWM: Wipe Cache Partition
    • CWM: Advanced/Wipe Dalvik Cache
    • Reboot

    Downloads Section
    Make Certain you read this ENTIRE post before Downloading... I know you didn't Go back and read it! :good:

    Builds/ROMs:
    GAPPS:

    paranoid_changelog.png


    ParanoidAndroid 3.15a - 4/6/2013 - Basic source update. Pulled newest and latest PA sources. Please check the PA page for their full changelog.

    ParanoidAndroid 3.15 - 3/24/2013 - Basic source update. Pulled newest and latest PA sources. Please check the PA page for their full changelog.

    ParanoidAndroid 3.10 - 3/4/2013 - Will update tomorrow... need sleep

    ParanoidAndroid 3.0 - 2/20/13 - Take three... Another stability release... I told you guys there was a lot of working that needed to be put into this to get it working correctly on our device. Fixed APN force close. Fixed Wifi tether. May have fixed USB tether (let me know). Fixed FC when selecting USB connections from settings - storage. Added CPU boosting. Fixed tethering issues on startup. Added storage manager to tablet mode (able to use USB correctly). pulled latest PA source code.

    ParanoidAndroid 3.0 - 2/20/13 - Take two... Stability release to fix issues from the initial 3.0 release. Fixed deep sleep issues, BT should now be functional, Fixed kernel to better work for an AOSP build. Stability changes made throughout the build to suite our device. Intentionally broke USB tethering for now.. Want to see if that is the cause of the couple of notification pull down freezing issues that have been reported.... For those of you that were having the issue, please let me know if you noticed any difference. Id suggest upgrading to this build as battery life should be improved.

    ParanoidAndroid 3.0! - 2/18/13 - Thats right! Paranoidandroid is back to the infuse!! Based off AOSP 4.2.2 source. Huge thanks to the ParanoidAndroid team for this awesome beautiful piece of work that we were able to get working on our device. Words wont describe it, you need to flash this to experience it for yourself! - Everything should be working for the most part... There were alot of changes/patches i needed to add in order to get this working on our device. As of now, Bluetooth is completely busted. I havent looked at it much, but it shouldnt be to tough to fix. Ill get working on that tomorrow. Do not use this if you need to use bluetooth!!!!

    ParanoidAndroid - 11/18 - For those of you that were reporting issues (reboots) from the previous build, this is an update for you. Download and Flash this Kernel. I reverted some of the minor changes that more then likely caused the trouble. I have no idea why some of you were having horrible problems and why some of you were not, but i guess that pretty much indicates how horribly F'ed our kernel is and that the smallest freaking change causes havoc for some users. Going forward, im not even touching the kernel or looking into changing anything kernel wise unless its a standard cm change for ALL samsung kernels.

    ParanoidAndroid - 11/04 - First and foremost... Fixed my mistake that took away the 8mp option for camera... That is now back (thanks to everyone that pointed it out). Next... OC kernel has been migrated into main kernel. That means no more separete OC kernel. Just one kernel with 1400 and 1600 mhz steps. Now... With this option added, Please use caution using those levels and use common sense. If the phone reboots or you have any issue at 1600 and think that something is wrong with the build, please change frequency back down to stock 1200 and if it stops, then obviously oc isnt working good for you. DO NOT REPORT IT as a bug in the build! JT added an option into the cm source files that allows us to set long press actions from the lock screen. Its pretty neat... You can specify values such as flashlight control and media controls from the capacitive keys and to activate, just long press whichever button you set. That option can be found in settings - lockscreen. I optimized more of the kernel values (again) and gave us an extra 13 MB of RAM. I updated wifi drivers again. There have been a small number of reports that when the phone goes into deep sleep and then they wake, wifi does not reconnect. Im not sure if the wifi update fixed that or not, but if you happen to be one of the few that experience this issue, just download and use wifi fixer. I tested it with no issues or complaints. Updated kernel compression/decompression files. Added encryptable footer (fixes cryptofs errors in logcat). Enabled expandable desktop option. Few kernel changes/optimizations here and there. Merged latest PA/CM source code which includes alot of fixes for the color layout from paranoid android settings menu.

    ParanoidAndroid - 10/28 - WOW! This seemed like a small update at first, but it got huge. Not only from changes on the source on our end, but also the changes on the PA side. Lets start off with the big things... The reboot into recovery when applying your settings issue has been FIXED. There is no longer an OC kernel... Why you ask? Because I added the OC options to the stock kernel and it is stable as before even when using the OC features. Added a few fixes device side for auto brightness (should make it a little better) and also camera. Reverted one or two questionable changes to ensure stability. Added a few changes on the kernel side to make dvfs code more efficient, fixes for wifi (only a couple minor ones.), update touchscreen driver, update kvm code to handle pages more efficiently. Corrected the camera preview/picture sizes (they seemed to be off before). Removed unused/unsupported code on device side. Added overlay config for the home key to unlock device feature to work correctly and the option is found from settings - lock screen - screen security - home unlock. Oh BTW.. latest PA source has been merged... They have been busy. They have added a new option to the Paranoid Preferences menu called 'Colors'.. It basically just automatically changes the status bar color for different apps you open. It is pretty neat. They have added a ton of other customizable features as well... Honestly... Im not sure what else they can come up with...

    ParanoidAndroid - 10/22 - Will update in the morning... I need sleep right now. Download it and find out for now. :D

    ParanoidAndroid - 10/19 - We now have Dock audio! Big thanks to araemo for getting dock audio working correctly. The dock audio feature can be found from settings - advanced - dock. Fixed the delayed capacitive keys... Very rarely sometimes when locking the phone, the screen would flicker back on and then capacitive keys would be delayed before becoming responsive. I claimed to have fixed it last build, but im almost certain that i definitely fixed them this time. I patched a few files in the kernel that were causing issues which should make the build even more stable (not that it wasnt before). Fixed an issue with our calibration driver not reading the correct file on boot up... It is now set to correct path and reads the file as it should. Pulled kernel wireless drivers from siyah kernel. This should improve wifi usage and get us a little more up to date with current sources (we still got a loooong way to go). Added ISO options to camera thanks to a commit from JT. Merged latest PA/CM source. Set up Goo.im, you can find me under devs - scotthartbti. I have modified the build.prop to accomplish OTA updates for next release.... And i think that about does it.

    ParanoidAndroid - 10/14 - Updated build already? I think so! This build is mainly little bug fixes and missed things from the 4.1.2 source merge, but there are some key things from our device end that make it worth downloading. I optimized our kernel code a bit and freed up about 35 - 40 mb of RAM without sacrificing anything at all. I believe i have fixed the delayed response keys that would very intermittenly show up (most of u probably have never noticed), I have enabled installation of unknown apps by default (was tired of having to enable it everytime id restore from titanium)... I know there are a few other small things im missing, merged latest PA/CM source.

    ParanoidAndroid - 10/11 - Android 4.1.2 is here and ready to go on the infuse! Please search for Android OS changes from 4.1.1 to 4.1.2 as im not going to list every single change they have made. I have fixed up the power HAL this build, should be fully functional now (Thanks araemo). Added zRam, which is enabled/disabled from settings - performance. Slight clean up in device tree. Made a change that should improve GPS lock time. Everyone that i had test it reported improvements.... remember, it may still take a minute or two for the initial lock, but after that it should be good to go, atleast it was for myself and the people who tested. Merged latest PA/CM source code. *** Previous GAPPs will work, no need to go searching for newer GAPPs.****

    ParanoidAndroid - 10/5 - New partition layout to increase /system to 400mb to avoid any possible space issues. We previously had 350mb and we were cutting it very close! Added power HAL for our device and also added pulse boosting to the ondemand governor... Its pretty nice. Few minor fixes here and there. Lockscreen has a transparency option. Notification toggles have been added to notification list. Nav keys have customizable options added to them. Cleanup, bugs fixed. Merged latest PA source code. - PLEASE READ THIS BEFORE DOWNLOADING AND FLASHING!!!!: I had people test the following install and they left their external SD cards in the phone and had no issues, but if you do have an issue, remove external sdcard and try again. This latest build has been repartitioned so that /system is larger. system was previously 350mb and we were running out of space, so in order to avoid space issues, /system has been increased to 400mb. Now, since the partitions have changed, that means that they are going to wiped out and setup again when you flash the zip. This is going to cause the same behavior as the initial bml to mtd conversion flash. If you are on the previous MTD partitions, When you first flash, it will give you a warning message saying that your data will be erased in converting and you must flash again to and stop and you will see the dead android guy. This is just a warning message and is meant to be seen!!!. You will then need to flash again and this time it will start the conversion and then reboot into recovery and finish the conversion and then reboot into recovery again when it is finished. If you are on BML and converting to MTD for the first time, once you flash the package it will just start to install and reboot 2 times during the install process. When it comes back up the second time, you are finished and can proceed. You can then install GAPPs if needed or just boot up like normal. One last FYI... If you use an OC kernel, you need to use the newest one with the new partitions laid out or your gonna have some issue. Do NOT use old OC kernel on this new build.

    ParanoidAndroid - 9/27 - Fixed Battery drain issue from 9/23 build that was removed. Fixed data indicator issue. Added support for suspend mode in charging, merged latest source - USB Tethering is now working thanks to thebecoming! Reverted a couple changes that i believe was causing issues for a couple people on last build, you guys should be good now. Added smartassv2 and interactive governors. Tweaked Conservative governor (thanks entropy). Cherry picked a commit for promixity sensor settings from phone - settings. Various upgrades to kernel. Merged latest PA source code.

    ParanoidAndroid - 9/15 - Bunch of changes... Merged a bunch of aries changes that were previously overlooked.. Fixed the MMS issue that random people were having... araemo fixed torch.. it is now functioning perfectly and the torch app is included.. the other flashlight app has been removed. Thanks araemo! remapped search key to work with hardware key options... Updated the kernel bt drivers which in turn fixes the BT disconnect issue a few have reported.. merged latest PA source code... Updated to latest ParanoidPreferences.. A bunch of other things i forgot.

    ParanoidAndroid - 9/6 - Paranoid Settings app has been giving an overhaul. They have added an extra option from the app. It gives you even more ability to completely customize things as you seem fit. Added LED flashlight app from market. It works as it should. PA wall papers have been added. Cleaned up the kernel code a bit... Nothing major. All latest PA source code has been merged. Few little things here and there.

    ParanoidAndroid - 8/26 - Added OC kernel option to main page. Has 1400 and 1600 mhz steps. Seems pretty solid from stress testing and feedback from the test team. Give it a try. Cleaned up a little more of the source code in our tree, changed some of the MMS values in the overlay.

    ParanoidAndroid - 8/25 - Not much physical change, but tons of changes/fixes to make things better. Now able to see Data Usage from settings menu. GPS locks crazy fast and is accurate as its supposed to be. Wifi Tether completely works. Quite a few kernel patches. Revamped the sensor code for our device. Added overlay to predefine a few apps such as MMS and Trebucet. Merged latest PA source code. You know you want this.

    FYI... I am debating uploading my OC kernel i just created.. Frankly i dont think its needed and dont agree with it, but the people seem to want it and who am i to stop them.

    ParanoidAndroid - 8/18 - This is not an official PA update, this is more of a personal fix things and make it better update. I have added 2 new layouts to the Paranoid Preferences configuration menu.. The option are now Stock, Hybrid, Phablet small, Phablet mid, Tablet small, and Tablet mid. Wifi tether is now partially working.. For whatever reason it doesnt work when you set security, but if you set it up as open, it works fine. Changed out the GPS script.. Users have reported faster lock times and more accurate location fixes. This was created by Marty331 and all credit goes to him. Merged the latest PA source code. Removed alot of the bloat files to make the zip package alot smaller then before and free up space. Enabled back to kill button. And a few other things i cant think of right now.

    ParanoidAndroid - 8/15 - Jellybean ParanoidAndroid has begun! This has been compiled from CM10/ParanoidAndroid source code. This is a starting point for a ROM that is complicated as is... So you may run into an issue here or there. Enjoy!
    Paranoid Android changelog

    All of the source code for PA/CM builds can be found Here: My Github
    25
    Hey I wanted to update everyone with progress that has been made today. Its been a good one. Some people have noticed the issues with the WiFi for past two builds since I updated the drivers... the issue is that sometimes when your phone comes out of sleep, WiFi does not reconnect until you toggle it off then on... well.. not anymore.. that is fixed now because i was able to update WiFi drivers again today and its working as perfect as it ever has. Also, I had a break through with 720p... seems we missed a change awhile back... made the change, and now 720p does not flicker/stutter at all.... but... it hangs now when you go to stop recording. Nonetheless, I feel this is definitely progress and feel like were close to finally getting 720p working. Also added some other kernel changes. I'll pick up again tomorrow.

    Sent from my SGH-I997 using xda app-developers app
    24
    Re: [ROM][JellyBean][4.1.2]ParanoidAndroid 2.53 - Butter - MTD Updated 11/18 - OC Ker

    OK.... I got a full build of pa 3.00 based off aosp 4.2.2 just about ready for release. As of right now, the vibration needs fixing and for some reason the papref permissions are not being set correctly so you have to manually change them in order for it to work correctly .... Just need to figure out those two things and we will have some pa goodness. Hopefully tomorrow.

    Thanks for the patience as this is definitely not a simple sync and build job... There is a lot I needed to add for it to work on our device

    Sent from my SGH-I997 using xda app-developers app
    22
    Paranoid Android 2.53 - 11/4/2012 - MTD - Butter -- First and foremost... Fixed my mistake that took away the 8mp option for camera... That is now back (thanks to everyone that pointed it out). Next... OC kernel has been migrated into main kernel. That means no more separete OC kernel. Just one kernel with 1400 and 1600 mhz steps. Now... With this option added, Please use caution using those levels and use common sense. If the phone reboots or you have any issue at 1600 and think that something is wrong with the build, please change frequency back down to stock 1200 and if it stops, then obviously oc isnt working good for you. DO NOT REPORT IT as a bug in the build! JT added an option into the cm source files that allows us to set long press actions from the lock screen. Its pretty neat... You can specify values such as flashlight control and media controls from the capacitive keys and to activate, just long press whichever button you set. That option can be found in settings - lockscreen. I optimized more of the kernel values (again) and gave us an extra 13 MB of RAM. I updated wifi drivers again. There have been a small number of reports that when the phone goes into deep sleep and then they wake, wifi does not reconnect. Im not sure if the wifi update fixed that or not, but if you happen to be one of the few that experience this issue, just download and use wifi fixer. I tested it with no issues or complaints. Updated kernel compression/decompression files. Added encryptable footer (fixes cryptofs errors in logcat). Enabled expandable desktop option. Few kernel changes/optimizations here and there. Merged latest PA/CM source code which includes alot of fixes for the color layout from paranoid android settings menu.
    21
    Great news everyone... looks like the sources are finally merged! So what does that mean?! PA 4.2.1 Infuse goodness for all! As soon as i get some time ill work on getting a build out. I have a bunch of other things going on right now, but will try to make this a priority since it has been a long time since a new release.