[ROM]Debellare[EC09]

Search This thread

isaiahhhhh

Senior Member
Jan 5, 2009
142
103
33
Maine
Ok after flashing I had an issue where it would boot up and then get stuck at the end of the boot animation and just keep showing the verizon logo with the flashing lights. So I reflashed and after reboot now I get the following

Code:
E:Can't mount /dev/block/st.l11
 (Invalid argument)
          # MANUAL MODE #
E:Can't mount /dev/block/st.l11
 (Invalid argument)
E:Can't mount /dev/block/st.l11
 (Invalid argument)

Any idea?
 

pattielipp

Senior Member
Apr 26, 2011
268
79
South Carolina
www.mytechliving.com
it is still bery basic. No themeing has been done. What is is a very early, however very stable release. It includes all of Trailblazers mods with my deodex/debloated and ADW launcher. It is very stripped down to the bare minimum to aid in speed and stability. There is no force closes and no issues with this. Battery life is great.

If you loaded this over my debloated you won't see much change in terms of apps, although a few more were removed.

The main things will be all the ticker mods, the settings mods(for removing the clock from the status bar, etc), font pack, launcher and of course the debloating
 

KJW979

Senior Member
Jun 18, 2010
487
122
Buffalo, NY area
Is this ROM different than the one in the debinged & debloated post? if so is there a link for a odin method, only appeards to be heimdall. The link in the box marked code seems to be the same as in your other post or is it different?
 

logan302

Senior Member
Jul 13, 2009
152
22
Charleston, SC
Heimdall

Well I tried Heimdall today over the debinged EC09 and it would not go further until I checked re-partition...doom followed. Well I am back up after several flashes. Hints?
 

Weudel

Retired Forum Moderator
Jul 18, 2010
588
97
Might have to dust off the old Continuum and try this bad boy out... Glad there's still some activity over here for those of us that suckered in by VZW...
 

mrjake1970

Senior Member
Dec 31, 2010
321
101
Cleveland
So this isn't working then? I'm currently on the EC09 debinged & debloated. Not flashing correctly over it?

Sorry if this is a tad off topic (but not really) .. ive posted several times asking for help and such with the wife's continuum. i borked it pretty badly about a year ago trying to flash the first ROM's that came out for this. i still cant flash anything fully. i have her "stable" now on this ROM, but things still dont work right.. and i my humble guess is because the CWM port is either missing something or writing something wrong.

for some reason, flashes only seem to "take" sometimes. ive odin'd back to the pure stock and it NEVER erases all the data, and properly resets it. i still cant fully format the system or boot, and when i went from MIUINA to EC07 and to this, it still "held over" files and data even tho i manually tried to erase everything in CWM.

no disrespect intended for the devs who gave us the recovery for this. however i think something is borked in the recovery that flashes something to a wrong partition, or deletes something that is required on this phone.

and believe me, i know the recovery was long in coming, and kanged and ported to the best of the devs ability.. but i really think it has to do with the recovery/flash process - not the roms themselves.

is there a way to get a new CWM ported now that there are a few new solid 5.0 releases for other sammy devices? maybe that can help?
 

KJW979

Senior Member
Jun 18, 2010
487
122
Buffalo, NY area
Sorry if this is a tad off topic (but not really) .. ive posted several times asking for help and such with the wife's continuum. i borked it pretty badly about a year ago trying to flash the first ROM's that came out for this. i still cant flash anything fully. i have her "stable" now on this ROM, but things still dont work right.. and i my humble guess is because the CWM port is either missing something or writing something wrong.

for some reason, flashes only seem to "take" sometimes. ive odin'd back to the pure stock and it NEVER erases all the data, and properly resets it. i still cant fully format the system or boot, and when i went from MIUINA to EC07 and to this, it still "held over" files and data even tho i manually tried to erase everything in CWM.

no disrespect intended for the devs who gave us the recovery for this. however i think something is borked in the recovery that flashes something to a wrong partition, or deletes something that is required on this phone.

and believe me, i know the recovery was long in coming, and kanged and ported to the best of the devs ability.. but i really think it has to do with the recovery/flash process - not the roms themselves.

is there a way to get a new CWM ported now that there are a few new solid 5.0 releases for other sammy devices? maybe that can help?

I believe any phone is like that, even my OG DROID with its unlocked bootloader and all after flashing many different roms always seemed to have problems whether it be a app won't work right, continuous fc's, or laggy as hell. SBFing back to stock unrooted helped some but it was never the same. Always had a problem, I'm just glad I never bricked my phones.

Sent from my SCH-I400 using XDA
 

pattielipp

Senior Member
Apr 26, 2011
268
79
South Carolina
www.mytechliving.com
Sorry if this is a tad off topic (but not really) .. ive posted several times asking for help and such with the wife's continuum. i borked it pretty badly about a year ago trying to flash the first ROM's that came out for this. i still cant flash anything fully. i have her "stable" now on this ROM, but things still dont work right.. and i my humble guess is because the CWM port is either missing something or writing something wrong.

for some reason, flashes only seem to "take" sometimes. ive odin'd back to the pure stock and it NEVER erases all the data, and properly resets it. i still cant fully format the system or boot, and when i went from MIUINA to EC07 and to this, it still "held over" files and data even tho i manually tried to erase everything in CWM.

no disrespect intended for the devs who gave us the recovery for this. however i think something is borked in the recovery that flashes something to a wrong partition, or deletes something that is required on this phone.

and believe me, i know the recovery was long in coming, and kanged and ported to the best of the devs ability.. but i really think it has to do with the recovery/flash process - not the roms themselves.

is there a way to get a new CWM ported now that there are a few new solid 5.0 releases for other sammy devices? maybe that can help?

There are a few things wrong with everything you did unfortunatly. This rom only flashes the system recovery and kernel. I had it the same way with MIUNIA. I did this so if you came from another rom you wouldn't loose your files.

The next issue is you said you went from miunia to ec07(which is fine) then you went to this.. There lies the issue. I recommend downloading and installing the full ec09 system image located at this link. That is a complete ec09 system image provided by abby nitewolf. It will reset everything and put everything in it's correct place.
Once you flash that, i would reflash this overtop and it should resolve any and all of your issues, assuming you did it correct.
 
  • Like
Reactions: mrjake1970

myeweb

Member
Dec 15, 2009
29
2
links dead????

Hello, I was trying to download your odin files for both Miunia and Debellare and neither one seem to be working.... :/
 

KJW979

Senior Member
Jun 18, 2010
487
122
Buffalo, NY area
Any chance in getting an odin file for this ROM, dl'd heimdall, read instructions but still confused on what to put where.

Sent from my SCH-I400 using XDA
 

Txwolf1980

Senior Member
Aug 13, 2011
909
229
Huntsville Tx
Any chance in getting an odin file for this ROM, dl'd heimdall, read instructions but still confused on what to put where.

Sent from my SCH-I400 using XDA

I take it that this was after reading my tutorial? If so, and you'd like to work on it, pm me, and we can set up a time to meet in irc.

Sent from my SCH-I400 using Tapatalk 2
 

KJW979

Senior Member
Jun 18, 2010
487
122
Buffalo, NY area
If anyone willing to help when attempting to flash this ROM with heimdall I screwed up my phone, attempted to flash back to a stock ROM with no luck. Only thing I can get into is bootloader & recovery, lost root & CWM recovery. Any guidance would be appreciated. Good thing have back up phone as was daily driver.

Edit:Got phone to flash EC09 deoxed & able to boot up.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 2


    Debellare
    EC09

    ScreenShot-2.png
    ScreenShot.png

    20120329091604.png
    ScreenShot-1.png

    20120329090319.png



    ODIN File Courtesy of our own TXWolf
    Temporarily MIA

    Heimdall Files
    zImage
    zImage alternate link

    recovery.bin
    recovery.bin alternate link

    factoryfs.rfs

    For HEIMDALL, ODIN and documentation on how to use them, as well as all other documents please visit the Continuum Database



    Code:
    I have created a basic deodexed and debloated release. It 
    is in my other thread, however i will provide the links here as 
    well. I will keep this live through the whole process due to it's 
    simplicity and it being completely stock internally.
    
    [COLOR="SandyBrown"]The following has been Deodexed, Debinged, Debloated, and 
    all the other Junk removed.[/COLOR]
    These Must be installed over top of another EC09 Build. Included in the packages are 
    the System(factoryfs.rfs), Recovery(recovery.bin) and the kernel(zImage).
    [COLOR="Red"]Flash at your own risk.[/COLOR]
    Odin Image File: [URL="http://dl.dropbox.com/u/49820692/ec09debinged.tar.md5"]here[/URL] (untested, someone please inform if this works)
    Heimdall Image File:[URL="http://dl.dropbox.com/u/49820692/ec09%20debloated/EC09Debinged.tar.gz"]here[/URL]
    
    Independent Files:
    [URL="http://dl.dropbox.com/u/49820692/ec09%20debloated/factoryfs.rfs"]factoryfs.rfs[/URL]
    
    [URL="http://dl.dropbox.com/u/49820692/ec09%20debloated/zImage"]zImage[/URL]
    [URL="http://dl.dropbox.com/u/49820692/ec09%20debloated/recovery.bin"]
    recovery.bin[/URL]
    2
    Can someone make an odin file? It's honestly the only thing I feel comfortable working with.

    FILE REMOVED. IT IS CORRUPT AND BOOT LOOPING. WILL RELOAD TONIGHT.


    There is the link to ODIN file. Grab it while it's still available (thank you Dropbox). I'll be uploading an alternate tomorrow, since I'm sure this one will get tanked, at some point.
    1
    Sorry if this is a tad off topic (but not really) .. ive posted several times asking for help and such with the wife's continuum. i borked it pretty badly about a year ago trying to flash the first ROM's that came out for this. i still cant flash anything fully. i have her "stable" now on this ROM, but things still dont work right.. and i my humble guess is because the CWM port is either missing something or writing something wrong.

    for some reason, flashes only seem to "take" sometimes. ive odin'd back to the pure stock and it NEVER erases all the data, and properly resets it. i still cant fully format the system or boot, and when i went from MIUINA to EC07 and to this, it still "held over" files and data even tho i manually tried to erase everything in CWM.

    no disrespect intended for the devs who gave us the recovery for this. however i think something is borked in the recovery that flashes something to a wrong partition, or deletes something that is required on this phone.

    and believe me, i know the recovery was long in coming, and kanged and ported to the best of the devs ability.. but i really think it has to do with the recovery/flash process - not the roms themselves.

    is there a way to get a new CWM ported now that there are a few new solid 5.0 releases for other sammy devices? maybe that can help?

    There are a few things wrong with everything you did unfortunatly. This rom only flashes the system recovery and kernel. I had it the same way with MIUNIA. I did this so if you came from another rom you wouldn't loose your files.

    The next issue is you said you went from miunia to ec07(which is fine) then you went to this.. There lies the issue. I recommend downloading and installing the full ec09 system image located at this link. That is a complete ec09 system image provided by abby nitewolf. It will reset everything and put everything in it's correct place.
    Once you flash that, i would reflash this overtop and it should resolve any and all of your issues, assuming you did it correct.
    1
    try the toggle widget and mess with it with that.. i'll take a look and see if i can edit something to change the brightness.
    1
    Has anyone had any luck booting with this file? It's the one I'm trying to use, since the links to factoryfs in the OP are shot. I can't get past boot with it. 3 separate downloads, and 4 flashes. Both in Heimdall and Odin. Until I can get a file that will work with my phone (not sure why this one isn't. If it's the file, or just my phone), I can't make a good odin.

    I will upload again if want, possibly bad upload?

    Sent from my SCH-I400 using XDA

    Edit:here is another link, hope works? http://dl.dropbox.com/u/7988008/factoryfs.rfs