[ROM] MiniCM7-2.2.2 [6/7/13]Gingerbread 2.3.7/CM7.2 unofficial port for the Χ8

Search This thread

ijskast

Member
Oct 18, 2007
10
3
Screen allignment

hello,

unlocked bootloader with flashtool
flashed latest nNa kernel
flashed miniCM7.2.1.9
flashed gapps provided in link

I have this weird issue, when navigating the menus.
The screen loses Horizontal and or Vertical allignment.

When i press the power button to screen-off and again to power on
The allignement is normal again up untill some clicks later.

I tried a full factory reset already, at first it looked OK but the problem comes back after a while.

Is this a known issue? Can it be easily solved?
 

ziemny

Senior Member
Dec 28, 2011
205
30
Warsaw
hello,

unlocked bootloader with flashtool
flashed latest nNa kernel
flashed miniCM7.2.1.9
flashed gapps provided in link

I have this weird issue, when navigating the menus.
The screen loses Horizontal and or Vertical allignment.

When i press the power button to screen-off and again to power on
The allignement is normal again up untill some clicks later.

I tried a full factory reset already, at first it looked OK but the problem comes back after a while.

Is this a known issue? Can it be easily solved?

Happens to me every now and then, but I got used to it ;)
 
  • Like
Reactions: luki2411

ijskast

Member
Oct 18, 2007
10
3
hello,

unlocked bootloader with flashtool
flashed latest nNa kernel
flashed miniCM7.2.1.9
flashed gapps provided in link

I have this weird issue, when navigating the menus.
The screen loses Horizontal and or Vertical allignment.

When i press the power button to screen-off and again to power on
The allignement is normal again up untill some clicks later.

I tried a full factory reset already, at first it looked OK but the problem comes back after a while.

Is this a known issue? Can it be easily solved?

Apparantly this issue was created due to the CPU capping at 600Mhz ....
When set to 650Mhz this problem is not showing.
 

vesper7dd

Member
Mar 6, 2012
44
9
Sometimes after reboot, all my applications at sd-ext disappeared, what the hell? :confused:

Same here.... :( Also I have notice that this happens when I update or install some apps, so maybe the problem is not on the script but on the sd-ext partition..





This is not strange actually. The frequency table has changed a lot since stock kernel.

Hey naa, did you consider to work on ics? Your work on 2.3 is awesome and I guess that everyone here wants to see the new version of android made by you on his mini.. :)

Send from my tropical island using message in a bottle :p
 

nobodyAtall

Recognized Developer
Jan 16, 2008
1,583
19,555
Malaysia, Cheras
when you wilL relase kernel with toch recovery ?
ps : most of people move tO alfs v8 only for toch recovery

Firstly, your tone is rude to say the least. Nevertheless I'll try to respond to your actual contents.
Touch recovery the way it is right now in CWM (i.e. scrolling down the finger to move to the next option) is at minimum a crappy solution. Have you seen TOUCHCOVERY? You can actually pick your options and scroll through menus, much like you do on android menus. It's pretty nifty, though not open source. Additionally, touch recovery is only useful for devices with little to none actual hardware buttons. Our devices is a chassis with buttons all over the place...

The nAa kernel has so much more features and bug fixes and ports from higher kernels that no other kernel has for these devices. Check my github if you disagree and also check the commit dates to see that those things were firstly done on this kernel. This is a gpl'ed world though so anyone can cherry-pick and fork whatever they like.

Also feel free to use whatever super duper ultra extra mega extreme infernal apocalyptic kernel or ROM you like. Most of the ROMs posted on these subsections are based on MiniCM so comparing them with MiniCM is pretty pointless imo.
 

RodrigoOgasawara

Senior Member
May 5, 2011
288
59
São Paulo
I agree,touch recovery is not so useful,i think nAa prefer to focus on performance and not on things like this,by the way i think there's no point using virtual touch buttons fixed in one place.

Sent from my E15i
 

LeFeverts

Senior Member
Sep 27, 2011
252
94
Szarvas
Firstly, your tone is rude to say the least. Nevertheless I'll try to respond to your actual contents.
Touch recovery the way it is right now in CWM (i.e. scrolling down the finger to move to the next option) is at minimum a crappy solution. Have you seen TOUCHCOVERY? You can actually pick your options and scroll through menus, much like you do on android menus. It's pretty nifty, though not open source. Additionally, touch recovery is only useful for devices with little to none actual hardware buttons. Our devices is a chassis with buttons all over the place...

The nAa kernel has so much more features and bug fixes and ports from higher kernels that no other kernel has for these devices. Check my github if you disagree and also check the commit dates to see that those things were firstly done on this kernel. This is a gpl'ed world though so anyone can cherry-pick and fork whatever they like.

Also feel free to use whatever super duper ultra extra mega extreme infernal apocalyptic kernel or ROM you like. Most of the ROMs posted on these subsections are based on MiniCM so comparing them with MiniCM is pretty pointless imo.

you talked from my heart....i agree that, ther is lots of kernels, BUT they based on your work. thnaks for it!
 

xperiafan13

Senior Member
Jul 25, 2011
740
2,557
27
México
Thanks!!!

You know I admire you, your roms are great, and I agree with you, all roms are based on minicm, well I thank you for your effort, I just wish aber one thing, I'm almost sure that your next kernel, linux will 2.6.35, but I would like to know the date on which the published ...
 

nobodyAtall

Recognized Developer
Jan 16, 2008
1,583
19,555
Malaysia, Cheras
You know I admire you, your roms are great, and I agree with you, all roms are based on minicm, well I thank you for your effort, I just wish aber one thing, I'm almost sure that your next kernel, linux will 2.6.35, but I would like to know the date on which the published ...
SE has hacked this kernel too much for compatibility with our phones and it's not an easy task to rebase to anything else, even to .32
This will still be 2.6.29 in the kernel version but practically most of the components are already patched, even from 3.0+ kernels.

All that ICS needs from a kernel POV will be there ;)
 

Antimony

Senior Member
Dec 21, 2011
79
15
Touch recovery?No thanks,I prefer my trusty reliable hardware buttons.
Anyway thank you for everything you have done to make our devices what they are today and i can't wait for future updates:p
 

n1kolaa

Inactive Recognized Developer
Oct 21, 2011
3,367
4,062
Zrenjanin
OnePlus Nord
SE has hacked this kernel too much for compatibility with our phones and it's not an easy task to rebase to anything else, even to .32
This will still be 2.6.29 in the kernel version but practically most of the components are already patched, even from 3.0+ kernels.

All that ICS needs from a kernel POV will be there ;)

big tnx for changelog and gl mate
 

Top Liked Posts

  • There are no posts matching your filters.
  • 345
    PresentationSmall.jpg


    Visit Project's page @ google code

    MiniCM7 is part of the FreeXperia project

    Sources are at my Github: MiniCM nobodyAtall

    This ROM is for the X8 -- For the X10mini check here

    MiniCM7 is custom-built, based on CyanogenMod 7, running Android Gingerbread on top of the nAa kernel.


    Notes:
    • The MiniCM7 and OrangeHaze themes are made exclusively for the MiniCM7 ROMs. They are not to be used with other ROMs, so DON'T rip them
    • To cookers: If you want to use parts or all of this ROM for your custom cooks, read this first. You also must link to this thread
    • To everyone: Please don't mirror this ROM
    • MiniCM7 is built for X10mini and X8. It is a stable and the most feature-complete Gingerbread ROM perfect for day to day use
    • This is a team work by DaRk_dOg and me
    • For Troubleshooting common issues visit: http://code.google.com/p/minicm/wiki/Troubleshooting



    FAQs (Many thanks to matmutant)

    If you have a question, please READ THIS before posting and also use the SEARCH button at the top right ->
    searchi.jpg




    If you want a more relaxed chat, or have issues with MiniCM, you can use the following chat server
    (Thanks to SafiXS for setting this up!)
    MiniCM chat



    Before posting an issue wipe (factory reset) via CWM at least once.


    Working:
    • Everything


    Features:
    • Built for MDPI
    • MiniCM Update notifications via c2dm (CM Settings -> System -> Update notifications)
    • App2sd / Dalvik2sd compatible with 2.1 app2sd (storing to ext2/3/4 pre-existing partition is detected and mounted as such)
    • Gingerbread's native App2sd (storing to fat)
    • In kernel ClockworkMod recovery v5.0.2.7 and option to reboot into Recovery
    • Modular Undervolting handled CM Settings menu (by default it's not active)
    • Extra CM Performance Settings menu for SD Read Cache Speed
    • Extra CM Settings display menu for Ultra brightness
    • Smooth 2D scrolling in menus
    • Fake Dual touch in kernel
    • Mddi lag fix in kernel
    • Native Wifi Hotspot
    • Native USB tethering
    • Most of the core components are built from sources


    Bugs: (Please use the project's tracker for reporting bugs. Please file them properly following the template or they will be discarded.)


    Requirements:


    Instructions:
    • Download the MiniCM7-xxx.zip from the release link that follows
    • Backup your /data contents: contacts, apps, sms, etc. or backup via recovery
    • Move the MiniCM7-xxx.zip to the root folder of your sdcard. Download the suggested Google Apps for CM7 from here (check http://goo-inside.me/gapps/ if you want to experiment with other gapps versions)
    • Unlock your bootloader, if you haven't already. Check http://xdaforums.com/showthread.php?t=1254225 for a nice tutorial
    • Flash the nAa kernel using Flashtool. To to this:
      - Turn off your phone
      - Start the Flashtool\X10FlashTool.exe and select Flash. Then select the E15_nAaxxx kernel firmware (this flashes both the kernel.sin and the loader.sin)
      - Keep the back button pressed while connecting the usb cable. Flashtool should detect your phone and flash the kernel.
      - Once done, disconnect the usb cable and power on the phone.
    • Once the logo appears, press the back button repeatedly to enter CWM.
      - Select 'backup and restore -> Backup'
      - Select 'wipe data/factory reset' (RECOMMENDED)
      - Flash the MiniCM7-xxx.zip. To do this, Select 'install zip from sdcard -> choose zip from sdcard' and select the MiniCM7-xxx.zip
      - Flash gapps
    • Reboot (first boot will take ~2 mins)
    • Once your device has booted, you can navigate to CM Settings -> System -> Update notifications and select 'Register'. This way you can get update notifications on new versions of MiniCM7!
    Please make sure you followed the above steps before reporting any issues, especially 'wipe data/factory reset'


    Downloads: do NOT mirror

    MiniCM7-2.2.2



    Additional Stuff:


    Donate:
    If you are enjoying my work please consider donating: .
    Donations are voluntary but allow me to spend more time on this project.



    Disclaimer:
    We can't be held responsible if this ROM bricks your device or makes it explode in your hands! Use it at your own risk!
    If any of the apps included in the ROM is copyright-protected, please let me know so I can remove it.


    Changelog:
    - 6/7/13 MiniCM7 2.2.2 build
    - 10/6/12 MiniCM7 2.2.1 build
    - 25/3/12 MiniCM7 2.2.0 build
    - 11/2/12 MiniCM7 2.1.9 build
    - 28/1/12 MiniCM7 2.1.8 build
    - 21/1/12 MiniCM7 2.1.7 build
    - 17/12/11 MiniCM7 2.1.6 build
    - 26/11/11 MiniCM7 2.1.5 build
    129
    MiniCM7 themes


    MiniCM7 Theme


    Inspired by MiniCM6's theme colours

    Designed according to official 2.3.3 Gingerbread design guidelines

    Build on t-mobile's theme engine (whole theme is an .apk, does not affect system theme)


    Code:
    DISCLAIMER:
    
    MiniCM7 theme is an exclusive part of MiniCM7 rom.
    MiniCM7 rom supports only X10 mini(E10) and X8(E15) for now so every other rom that is "based", or using parts of MiniCM7,
    should NOT use this theme.
    The creation/design of this theme is my personal tribute to this rom (and also its trademark), so it would be a great sign
    of respect if it wasn't distributed with any other rom.
    
    D_d


    Screens:

    screensyl.png




    ------------------------------------------------------------------------------------------


    OrangeHaze Theme


    Screens:

    postny.png


    Each theme's wallpaper can be found under the launcher's "Wallpaper" selection. Search there in case you've changed it and want to rollback.​


    MiniCM7 theme and OrangeHaze are based in a common template i made so from this version, their changelog is common.




    Changelog:

    -08-5-2011: MiniCM7 Theme Alpha 1 build
    Code:
    -Initial release

    -25-5-2011: MiniCM7 Theme 2.0.1
    Code:
    -Themed Gallery 3D
    -Themed Music app
    -Themed Torch
    -Themed Genie Widget
    -Themed DeskClock
    -Themed Launcher
    -Themed Google Search
    -Changed widget backplate (different highlight also, more sharpness)
    -Added more themed application launcher icons
    -Minor icons optimizations for ldpi

    -8-6-2011: MiniCM7 Theme / OrangeHaze Theme 2.0.2
    Code:
    -OrangeHaze theme addition
    -Themed LatinIME
    -Darker notification widget background
    -More themed application launcher icons
    -Wallpaper integrated to the launcher's selection
    -Lots of themed additions/optimizations

    -28-6-2011: MiniCM7 Theme / OrangeHaze Theme 2.0.3
    Code:
    -Added more launcher icons
    -Changed transparency in the popup dialogs
    -Themed Market

    -31-7-2011: MiniCM7 Theme / OrangeHaze Theme 2.0.4
    Code:
    -compiled straight from t-mobile's source
    -Fixed the "device is missing assets" issue (kudos to nobodyAtall for the solution)
    -semi-transparent notification background (90% opacity)
    -added several launcher icons

    -25-11-2011: MiniCM7 Theme / OrangeHaze Theme 2.1.5
    Code:
    -first common version for X8/X10 mini
    (still WIP)
    113
    Build Changelog:
    (Also viewable on your device via: Settings -> CM settings -> System -> View changelog)
    For a full list of Cyanogenmod changes check the gerrit:
    http://review.cyanogenmod.com/#q,status:merged,n,z
    or:
    http://cm-nightlies.appspot.com

    ### MiniCM7-2.2.1
    * CM7.2 RC4

    ### MiniCM7-2.2.0
    * CM7.2 RC1
    * Small bugfixes
    * Improved scrolling performance
    * Updated adreno libs
    * Media profiles update
    * New bootanimation

    ### MiniCM7-2.1.9
    * Improved proximity and light sensors (should solve screen staying black and skype issues)
    * a2sd scripts by texasice (http://xdaforums.com/showpost.php?p=21222591&postcount=1374)
    * a2sd via CM Settings -> Performance menu
    * Blade lockscreen style
    * Option to remove all stored Wifi networks by long pressing
    * Seperate notifications for MiniCM ROM / nAa kernel
    * Fixed Radio FM app RDS allignment
    * adb over network
    * kernel: 2.6.29.6-nAa-11

    ### MiniCM7-2.1.8
    * Improved 2d/3d performance due to new kgsl drivers
    * Configurable centre clock in status bar
    * ICS Transition animations
    * ICS Rotation animations
    * Various CM bugfixes (last sync was yesterday)
    * kernel: 2.6.29.6-nAa-10

    ### MiniCM7-2.1.7
    * Suport for X10mini pro (mimmi)
    * Various enchancements and fixes from CM
    * (CM) T9 dialer for quickly finding contacts
    * If no boot animation is selected, the MiniCM7 logo is shown
    * kernel: 2.6.29.6-nAa-09

    ### MiniCM7-2.1.6
    * Offline charging
    * Show kernel bootlogo if bootanimation is disabled
    * Removed modular overclocking since nAa-07 already has overclocked frequencies to choose from
    * Fixed OpenGL ES 2.0 version reporting
    * MiniCM7 and OrangeHaze theme updates

    ### MiniCM7-2.1.5
    * Based on CM-7.2.0 (RC0)
    * Suport for X8 (shakira)
    * Focus with camera button while video recording (robyn)
    * Disable network lock dialog after pin input (configurable)

    ### MiniCM7-2.1.4
    * Sensors are now built from source (no compat mode). No sensor delays
    * Many CM fixes related to stability, bugs and new features
    * Disabled automatic light sensor screen dimming
    * Automatic brightness now works (select tickbox from display settings and also allow light decrease from CM Display Settings)
    * Liblights fixes

    ### MiniCM7-2.1.3
    * Based on CM-7.1 release (Android 2.3.7)
    * kernel: 2.6.29.6-nAa-05
    * USB tethering
    * New usb drivers
    * Some extra RAM
    * Switched to fake dual touch from andrej456 (seems to be the best choice for the mini)
    * Ant+ support

    ### MiniCM7-2.1.2
    * kernel: 2.6.29.6-nAa-04
    * Compcache support (configurable via CM Settings menu)
    * Audio recording quality improvement
    * Ring lockscreen
    * Cherry-picks: Greek dictionary, MIUI-like Battery Bar, Preference to disable bootanimation for faster boot
    * Updated Polish translations
    * Fixed carrier detection and selection

    ### MiniCM7-2.1.1
    * Reverted Custom carrier label since it broke lockscreen unlocking

    ### MiniCM7-2.1.0
    * kernel: 2.6.29-nAa-02
    * Updated wifi/AP modules
    * Fixed 'notification bar difficult to pull up' issue
    * Fake DT updated to doixahn's 007 (in kernel)
    * Major device re-organizing and clean up. Allign with CM/robyn
    * Custom carrier label in CM Settings -> Interface -> Status bar tweaks
    * Clamp the duration of rotary animations
    * Reposition rotary lockscreen for 'drag down to unlock' to work easier
    * Camera support for googles and other apps (X8)
    * Loop ringtone option via: Settings-> CM Settings -> Sound
    * Fixed CWM recovery detection in About -> Phone

    ### MiniCM7-2.0.7
    * CM Setting (input settings) for back button to end current call
    * Added Smartass governor (thanks to AnDyX), not enabled by default
    * Wpa_supplicant / Wifi from sources
    * Rotary doesn't cover caller's name any more
    * LED flash via notification bar
    * Offline charging for X8

    ### MiniCM7-2.0.6
    * netcfg, libbluedroid from sources
    * Improved bluetooth / FM Radio functionality
    * liblights from sources (notifications should blink now)
    * Replaced Launcher2 with ADWLauncher
    * Fixed /data getting filled up with failed download files
    * MDPI and several other fixes for X8

    ### MiniCM7-2.0.5
    * Fixed ddms screen capture
    * Full camera capabilities (photos / video / AF / Flash) using eclair libcamera (thanks to doixanh)
    * Fixed chargemon script for multiboot
    * Smoother 2D scrolling

    ### MiniCM7-2.0.4
    * Android version 2.3.5 (GRJ90)
    * Removed Launcher pro (you can download latest rev. from market)
    * Optimize apks and strip down size
    * Updated LiveWallpapers
    * Updated CWM recovery to 3.2.0.0-r5 x10mini (multiboot + encryption)

    ### MiniCM7-2.0.3
    * Cyanogenmod 7.1.0-RC1
    * Theme updates for various parts
    * Radio app improvements
    * Fixed Usb debugging notification icon
    * backuptool on installation that backs up and restores google propriatery system files
    (no need to reflash gapps if it was already installed)

    ### MiniCM7-2.0.2
    * ClockworkMod recovery v.3.2.0.0-r3 for x10mini
    * Baseband verification on installation
    * Build number: GRJ22 (almost CM7.1) - several changes from Cyanogen
    * Many theme updates for MiniCM7 theme, new OrangeHaze theme
    * SDcard Cache size changed to 128K to avoid music players hiccups

    ### MiniCM7-2.0.1
    * MiniCM Update notifications via c2dm (CM Settings -> System -> Update notifications)
    * Camcoder high quality mode (VGA: 640x480)
    * Many Theme updates in numerous system places and applications
    * Cyanogenmod now has an option in CM Settings -> Lock screen -> Style options -> Incoming call style
    * Undervolting and Overclocking handled CM Settings menu (by default none is active)
    * Notification led
    * Fixed audio routing in FM Radio app
    * APN settings listing
    * gralloc reverted to stock (better performance)
    * Sensors fixed, working in compat mode
    * Compass fixed
    * Fixed Magic smoke wallpaper
    * Permission Management for apps by Cyanogenmod
    * Launcher Pro 0.8.6

    ### MiniCM7-2.0.0
    * Cyanogen7.0.3 - Android 2.3.4 code baseline
    * Built for LDPI
    * MiniCM7 theme
    * GSM/SMS/Data(3G, EDGE)
    * Wifi
    * FM Radio
    * Fixed reboots bug
    * Stock audio Recording
    * Flash led (Torch app)
    * ADB at boot
    * Sensors (except proximity and light)
    * OpenGL/3D
    * Audio Jack
    * Video decoder
    * Video playback support for 3rd party apps
    * Vibration
    * GPS
    * Bluetooth
    * App2sd (storing to ext*. Detect ext3/4 partitions and mount as such)
    * Native App2sd
    * xRecovery preinstalled
    * Usb mass storage
    * Audio Mixer
    * Camera (VGA)
    * Stock SE keyboard
    * Offline charging
    * Reboot menu - boot into xRecovery
    * tun module (vpnc)
    * Fake DT support (Thanks to: doixanh, andrej456)
    * Overclocking (Thanks to: doixanh)
    * Mddi lag fix (Thanks to: doixanh)
    * CM Settings performance menu for setting the Sdcard read cache size (speed improvements for sdcard)
    * CM Settings performance menu for CPU Overclocking
    * CM Settings display menu for Ultra brightness
    47
    Hello folks!

    MiniCM7-2.2.2 is released today with .32 kernel support.

    Cheers!

    -- nAa
    39
    when you wilL relase kernel with toch recovery ?
    ps : most of people move tO alfs v8 only for toch recovery

    Firstly, your tone is rude to say the least. Nevertheless I'll try to respond to your actual contents.
    Touch recovery the way it is right now in CWM (i.e. scrolling down the finger to move to the next option) is at minimum a crappy solution. Have you seen TOUCHCOVERY? You can actually pick your options and scroll through menus, much like you do on android menus. It's pretty nifty, though not open source. Additionally, touch recovery is only useful for devices with little to none actual hardware buttons. Our devices is a chassis with buttons all over the place...

    The nAa kernel has so much more features and bug fixes and ports from higher kernels that no other kernel has for these devices. Check my github if you disagree and also check the commit dates to see that those things were firstly done on this kernel. This is a gpl'ed world though so anyone can cherry-pick and fork whatever they like.

    Also feel free to use whatever super duper ultra extra mega extreme infernal apocalyptic kernel or ROM you like. Most of the ROMs posted on these subsections are based on MiniCM so comparing them with MiniCM is pretty pointless imo.