Ubuntu Touch 13.10 Saucy on the HP Touchpad DUAL BOOT ANDROID

Search This thread
By:
Advanced…
J

jshafer817

Senior Member
Jul 11, 2010
386
483
NRH, TX.
www.onsitedentalsystems.com
blmvxer said:
Not camera but inside certain apps.

Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse

Hmmmm...

cat /data/ubuntu/usr/share/ubuntu-terminal-app/ubuntu-terminal-app.qml
automaticOrientation: true

Oh.. we can edit the QML files without recompiling it seems!

Change automaticOrientation to false, and you can carry the tablet around without the terminal app changing orientation..

width: units.gu(50)
height: units.gu(75)

That seems to control the size of the terminal window?
 
Last edited:
J

jshafer817

Senior Member
Jul 11, 2010
386
483
NRH, TX.
www.onsitedentalsystems.com
Updated Rom

Updated

http://gdurl.com/eYtO Install Last Ubunt Touch RootFS\Data Partition (webos fstab fixed, sdcard added to fstab, camera-app angle fixed, terminal orientation fixed and taken out of SideStage)

Memory Usage is not bad.
HTML: 
             total       used       free     shared    buffers     cached
Mem:        885100     586020     299080          0      30800     314052
-/+ buffers/cache:     241168     643932
Swap:       102396          0     102396
 
Last edited:
  • Like
Reactions: Sine., blmvxer and kyzerdroid
J

jshafer817

Senior Member
Jul 11, 2010
386
483
NRH, TX.
www.onsitedentalsystems.com
Why does it boot SLOW?! UDEV is taking up ALL the CPU USAGE!!!

Going to recompile and recheck the 70-tenderloin.rules for udev...

You guys should as well.. Look that file over.. compare it to the android side.. It is on the ubuntu porting guide page..

I will recompile system.. you guys help me with udev.



[06:07] <ogra_> OrokuSaki_, udev is good for managing devices ... CPUs are used ... :p
[06:08] <ogra_> can you be a bit more specific ?
[06:08] <OrokuSaki_> I ran ps -ef and noticed /system/lib/udev --daemon is taking up around 86%
[06:08] <ogra_> huh ?
[06:08] <cjwatson> ogra_: oh. hmm. I seem to have no adbd in /system/usr/*bin/, but adb normally works ...
[06:08] <OrokuSaki_> screenshot hang on
[06:08] <ogra_> what would udev do in /system/lib ?
[06:09] <cjwatson> that's peculiar, the dpkg database thinks it's there
[06:09] <ogra_> yeah, android-tools-adbd should put it there
[06:10] * ogra_ finds it massively distrurbing that stgraber chose /system for the ubuntu part in system images .... since usually android uses that dir
[06:11] == OrokuSaki [42a9b9c2@gateway/web/freenode/ip.66.169.185.194] has quit [Quit: Page closed]
[06:11] == pmcgowan [~pat@97.sub-70-192-5.myvzw.com] has quit [Ping timeout: 264 seconds]
[06:12] <ogra_> cjwatson, looking at all these jobs in starting state in your log, none of them is used, i wonder if we should just override them
[06:12] == john-mcaleely [~jhm@nat/canonical/x-rabhyphdiswrmxbn] has quit [Ping timeout: 264 seconds]
[06:12] == nze [~uber@p57913ADF.dip0.t-ipconnect.de] has joined #ubuntu-touch
[06:12] <OrokuSaki_> @OgRa screenshot http://s9.postimg.org/pnwiuqgzz/screenshot.png
[06:12] <ogra_> (mountnfs and console-setup are pretty moot ... )
[06:13] <cjwatson> ogra_: well, maybe, but I think that's a side issue
[06:13] <ogra_> OrokuSaki_, aha, thats not /system/lib/udev :)
[06:13] <OrokuSaki_> What is that? =)
[06:13] <ogra_> thats udev
[06:13] <OrokuSaki_> Is it normal?
[06:13] <ogra_> it tries to process kernel uevents for your devices
[06:13] <cjwatson> tempted to just give up, reflash, try again
[06:13] <ogra_> no, thats not normal, check your udev rule for your device i'd say
[06:14] <nze> hey guys! the question's probably come up before, but I only found old news, so...
[06:14] <nze> how open/hackable would you say is the HTC One? any chances I'll be able to run ubuntu (or firefox OS) on it?
[06:14] <OrokuSaki_> Sweet... thanks man.. I have gone over it.. I can't seem to find anything out of the ordinary.. but.. I will look
[06:14] <ogra_> also make sure your android side was recently rebuilt, we had some fixes to ueventd that might influence udev behavior
[06:14] <nze> (also, how do the galaxy s4 and the nexus4 compare in that regard?)
[06:14] <OrokuSaki_> Hmmm sweet.. thanks!
 
J

jshafer817

Senior Member
Jul 11, 2010
386
483
NRH, TX.
www.onsitedentalsystems.com
ACTION=="add", KERNEL=="system_bus_freq", OWNER="system", GROUP="system", MODE="0660"
ACTION=="add", KERNEL=="cpu_dma_latency", OWNER="system", GROUP="system", MODE="0660"
ACTION=="add", KERNEL=="htc-acdb", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="msm_audio_dev_ctrl", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="msm_acdb", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="msm_pcm_lp_dec", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="codec_aic3254", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="pmem_adsp*", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="gemini*", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="adsp/*", OWNER="system", GROUP="audio", MODE="0660
ACTION=="add", KERNEL=="snd/*", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="msm_pcm_out*", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="msm_pcm_in*", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="msm_mp3*", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="htc-acoustic", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="msm_vidc_reg", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="msm_vidc_dec", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="msm_vidc_enc", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="tpa2051d3", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="control0", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="controlC0", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="pmem_audio", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="tpa2051d3", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="pmem_smipool", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="msm_camera/*", OWNER="system", GROUP="audio", MODE="0660"
ACTION=="add", KERNEL=="msm_rotator", OWNER="system", GROUP="graphics", MODE="0660"
ACTION=="add", KERNEL=="kgsl-2d0", OWNER="root", GROUP="root", MODE="0666"
ACTION=="add", KERNEL=="kgsl-3d0", OWNER="root", GROUP="root", MODE="0666"
ACTION=="add", KERNEL=="kgs1-2d1", OWNER="root", GROUP="root", MODE="0666"
ACTION=="add", KERNEL=="pmem", OWNER="system", GROUP="graphics", MODE="0660"
ACTION=="add", KERNEL=="genlock", OWNER="system", GROUP="graphics", MODE="0666"
ACTION=="add", KERNEL=="ttyHS0", OWNER="bluetooth", GROUP="bluetooth", MODE="0600"

This is the current 70-tenderloin.rules I am using.. I removed most of the lvm rules as well.. hmmm

recompiling my system image.
 
  • Like
Reactions: blmvxer
blmvxer

blmvxer

Senior Member
Jan 13, 2012
1,480
607
jshafer817 said:
Hmmmm...

cat /data/ubuntu/usr/share/ubuntu-terminal-app/ubuntu-terminal-app.qml
automaticOrientation: true

Oh.. we can edit the QML files without recompiling it seems!

Change automaticOrientation to false, and you can carry the tablet around without the terminal app changing orientation..

width: units.gu(50)
height: units.gu(75)

That seems to control the size of the terminal window?
Click to expand...
Click to collapse

Yes we can alter them. That's what I've been doing. :)


Sent from my LG-LS970 using xda app-developers app
 
blmvxer

blmvxer

Senior Member
Jan 13, 2012
1,480
607
Sent from my LG-LS970 using xda app-developers app
 

Attachments

  • uploadfromtaptalk1378314115585.jpg
    uploadfromtaptalk1378314115585.jpg
    233.4 KB · Views: 192
  • Like
Reactions: jshafer817
blmvxer

blmvxer

Senior Member
Jan 13, 2012
1,480
607
I could only run this through adb. The terminal said permission denied when using sudo.

echo bfq > /sys/block/mmcblk0/queue/scheduler

Switches our CPU governor. :)

Sent from my LG-LS970 using xda app-developers app
 
J

jshafer817

Senior Member
Jul 11, 2010
386
483
NRH, TX.
www.onsitedentalsystems.com
Sweet... I told powerd.conf to start with ubuntu-touch-session instead of dbus and systemd...

Seems to be GREAT now. Going to reboot 5 more times.. then reinstall.. reboot some more.. then reupload.

Well.. there is now a way to get app-armor to be disabled.. but they don't say exactly how.. I may mess with that tonight before reuploading..
 
  • Like
Reactions: blmvxer
J

jshafer817

Senior Member
Jul 11, 2010
386
483
NRH, TX.
www.onsitedentalsystems.com
Rom updated.. Seems more reliable.. CPU has plenty of power now, graphics are therefore faster, sound does not ever cut out? Touchscreen seems to work 100%... I added the camera to be mirrored parameter from darregrays older camera source, so the camera is now oriented and mirrored correctly... I also added a udev rule in the ramdisk and data partition for LVM2 which basically tells udev to ignore an lvm partition. udevadm settle now runs without hanging..

The extra udev rules for lvm2 gets rid of PID 125 taking up a lot of cpu usage.

udevtrigger seems to really need to run udevadm settle, so we let it, but then we restart udev when the ubuntu-touch-session is starting.. which for whatever reason... makes the 100% udev processes go away...

Would be wise to have apt-get install lvm2 installed..

I want apparmor to be disabled next, then update the data image to be from something newer when an image passes a good report.. and then.. try to find out why it takes so long to boot each time.. probably an ubuntuappmanager bug?

Added more cgroup stuff in the kernel config.. enabled cpusets
 
Last edited:
  • Like
Reactions: mindsofpsi
blmvxer

blmvxer

Senior Member
Jan 13, 2012
1,480
607
Have you been able to keep installed suggested apps? I can on my Nexus 7 but they don't persist after the reboot on here. Maybe just me.

Sent from my LG-LS970 using xda app-developers app
 
J

jshafer817

Senior Member
Jul 11, 2010
386
483
NRH, TX.
www.onsitedentalsystems.com
blmvxer said:
Have you been able to keep installed suggested apps? I can on my Nexus 7 but they don't persist after the reboot on here. Maybe just me.

Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse

Haven't really messed with clickapps.. click did get an update.. I want to keep apparmor disabled for all click apps, then update the data image to be newer from 08292013... then see what happens.
 
Q

quantan

Senior Member
Jan 26, 2011
341
162
@jshafer817 hi, I don't see any link in the OP, the build is still being uploaded? Sorry if I miss something :D. I am eager to see Ubuntu Touch on my TP :D. Thanks for your work :good:
 
  • Like
Reactions: jshafer817
You must log in or register to reply here.

Similar threads

J
HP Touchpad running Ubuntu Touch
Replies
193
Views
111K
K
kyzerdroid
BodenM
[PORT] Ubuntu 11.10 Native (Alpha 0.0.4)
Replies
899
Views
267K
blmvxer
blmvxer
jul644
  • Sticky
[GUIDE] How to get Ubuntu on the TouchPad
Replies
119
Views
96K
L
Lister Of Smeg
C
Ubuntu 13.04 Final Release
Replies
193
Views
73K
Traace
Traace
B
  • Locked
Windows 8 on the Touchpad?
Replies
51
Views
58K
MikeChannon
MikeChannon

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 30
    J
    jshafer817
    Ubuntu Touch 13.10 SAUCY Rom Triple Boot WebOS, Android, Ubuntu Touch (Or Quad if you need to)
    09-27-2013 is the RootFS Date with apt-get dist-upgrade to 9-29-2013

    Download Links Updated 09-29-2013 5:44 am central time
    http://gdurl.com/d6Qn cm-10.1-20130929-UNOFFICIAL-tenderloin.zip (Install First Kernel\Ramdisk\System Partition)
    http://gdurl.com/EnW8 saucy-preinstalled-touch-armhf.zip (Install Last Ubuntu Touch RootFS\Data Partition)

    PARTITION CREATOR AND UNINSTALLER (From ACMEInstaller3 and ACMEUninstaller) Thanks Green!
    http://www.gdriveurl.com/?idl=813809797536&out=2 UbuntuTouch_Partition_Creator
    http://www.gdriveurl.com/?idl=613809797926&out=2 UbuntuTouch_UbuntuDesktop_Partition_Creator
    http://www.gdriveurl.com/?idl=513809798298&out=2 UbuntuTouch_Uninstaller
    http://www.gdriveurl.com/?idl=413809798725&out=2 UbuntuTouch_UbuntuDesktop_Uninstaller

    filename.png


    HOW TO INSTALL!
    You will need a little over 2 GB of space on your sdcard to devote to the new LVM Partiitons! This assumes you HAVE installed CyanogenMod (Android), ClockworkMod Recovery, MoBoot and still have WebOS. WebOS is a prerequisite for Audio. ALSO, you need novaterm. http://www.webos-internals.org/wiki/Accessing_Linux_Using_Novaterm AND it's good to have adb as well.

    NOTE! If you have Ubuntu 11.04 - 13.XX Desktop Version
    The Ubuntu Desktop LVM needs to be Uninstalled and Recreated. I have provided uImage files and Novacom to do this, or you can change the /etc/fstab file to have the correct device mapper paritition number.

    Dealing with a small boot partition! It cannot hold all the uImages for WebOS, Android, Ubuntu Desktop, Ubuntu Touch, andClockworkMod at the same time. What I usually do is move the Ubuntu Touch kernel off of /boot to /sdcard (/media/internal in webos) before installing Ubuntu Touch, then move ClockworkMod to the /sdcard after installing Ubuntu Touch, and of course move the Ubuntu Desktop uImage file back to the /boot partition for Quad-Booting. You should only do this, if you know what you are doing, as having ClockworkMod on boot is handy. Know what you are doing or don't do it. (Which is why I should probably stay away from rom building!, haha) https://github.com/jshafer817/Ubunt...mportant files after compiling/data/etc/fstab

    *IF YOU HAVE ALREADY INSTALLED THE ROM THAT WAS NOT DUAL-BOOT CAPABLE, YOU SHOULD REINSTALL ANDROID FIRST SINCE WE WIPED IT OUT

    *Since we are dual-booting, we need to create 3 LVM Partitions that will use 2 GB of space from the sdcard*
    1. Copy the RootFS.zip and the cm-10.zip file to the sdcard
    2. Reboot into WebOS Recovery
    3. novacom boot mem:// < UbuntuTouch_Partition_Creator
    OR
    novacom boot mem:// < UbuntuTouch_UbuntuDesktop_Partition_Creator (Requires 6.2 GB of Space, for Ubuntu Desktop 11.XX - 13.XX)
    4. Reboot into ClockWorkMod to install the cm-10-*.zip FIRST and the RootFS zip LAST
    5. Reboot and chose uImage.UbuntuTouch

    Wait 3 minutes, while the touchpad boots. At some point adb will start to run. Eventually you should see a Unity Session..

    If you didn't see a session!
    a) reboot!
    b) Eventually the backlight on the screen will shut off.. Touch the screen or hit the power button or home button some builds to turn the screen on. Still no session? Can you run android-chroot when you get into adb? When you login to adb it should say root@phablet and not BusyBox? You can also run /system/bin/logcat. Hold down the power button for 2 or 3 seconds and Ubuntu Touch will shutdown.

    TO FORMAT UBUNTU TOUCH LVM PARTITIONS (in case your wondering create-partition.sh does this.. but what if you want to format after you install to do a reinstall??
    novaterm into webos!
    mkfs.ext4 /dev/store/ut-data
    mkfs.ext3 /dev/store/ut-system
    mkfs.ext3 /dev/store/ut-cache

    TO REMOVE UBUNTU TOUCH LVM's AND KERNEL
    novacom boot mem:// < UbuntuTouch_Uninstall

    TO REMOVE UBUNTU TOUCH AND UBUNTU DESKTOP LVM's AND KERNEL
    novacom boot mem:// < UbuntuTouch_UbuntuDesktop_Uninstall



    Having problems installing WebOS Applications????
    https://developer.palm.com/support/applicationupdate WebOS UpdateManager Certificate Fix
    http://xdaforums.com/showthread.php?p=42317438
    There is an update to WebOS.. If you wipe your device after July 23rd 2013.. Then you must do this.


    Ubuntu Touch Notes!

    NOTE! If you have Ubuntu 11.04-13.10 NON-TOUCH installed, you will need to:
    novacom boot mem:// < UbuntuTouch_UbuntuDesktop_Uninstall


    *Built from Milaq's CM 10.1 Source WITHOUT JCSullins Bluetooth fixes

    *Bluetooth and Sound come from the Ubuntu 11.04-13.10 Non touch. Mainly the upstart and executables. WebOS does get mounted for sound to get initialized. udev and pulse were patched.

    *First Ubuntu Touch device running Saucy (Flipped Image) but with LVM Partitions. For this to work I had to compile lvm and e2label statically and use them in the ramdisk for Ubuntu.

    How Saucy Works!?
    Kernel is loaded with an Ubuntu Touch Ramdisk (Like normal Linux). Then the data partition is mounted as root, the system partition is mounted as /system. The LXC containter loads android based off of /system, then Ubuntu Touch Session loads. This is not a chroot like quantal.


    What works:
    *Camera
    *Wifi
    *Bluetooth
    *Sound
    *Accelerometer


    Bugs and Beta\Alpha Stuff:
    1. PulseAudio\GStreamer\Music App is not tied to the Media Service, so the music does not play with the screen turned off. GStreamer keeps playing, but you cannot hear sound unless powerd has turned the screen on and.. ??? Not worth changing until Ubuntu Touch becomes more.. finalized. Sometimes the music does not come back on after a long sleep?
    Workarounds:
    sudo service powerd stop (with the backlight turned on)

    2. Bluetooth only works in terminal
    a) this is because Bluetooth Settings has not been written to Ubuntu Touch

    3. Camera App only works one time. Needs to be mirrored.. Again. Long story!

    4. Brightness or Backlight settings???
    as root!
    echo "0-255" > /sys/class/leds/lcd-backlight/brightness

    to set the screen brightness. 0-255 is a range of values you should use.
    0 will turn off the backlight
    255 is full birghtness
    and of course.. service powerd stop while the screen is on will stop powerd from turning off the backlight if idle.

    5. Touchscreen finger liftoff does not always get detected at boot correctly. Need to talk to ubunu-devel about that.? CM-TEAM?? Hmm.. Reboot and try again!

    6. Browser cannot download files. Browser cannot play videos because the latest gstreamer "has not landed yet"..

    7. 720P H.264 is choppy? 480p plays fine.. Waiting for more updates.

    APPARMOR NOTE: Since 2.6.35 Kernel does not have apparmor, we are using /usr/bin/aa-strip with crontab to run every minute. So if you install a click app and cannot run it, wait a minute! sed -i "s/aa-exec.*-- //g" /home/phablet/.local/share/applications/*.desktop

    OPEN-SSH NOTES:
    Recently they did something to openssh. Do this to install.
    apt-get install --reinstall openssh-server
    service ssh start (every boot?)
    If powerd turns off the backlight, it suspends your ssh session. There is some code in the wifi modules that I believe is causing it. Work on that later.. or disable powerd and turn the lights off to save battery power or backlight by reading brightness notes above.


    MTP-SERVER NOTE
    mtp-server has been disabled.. want to enable it? As root!
    cd /etc/init
    mv ../mtp* .
    cd /usr/share/upstart/sessions
    mv ../mpt* .
    reboot

    When you do, don't expect adb to work... In Ubuntu 13.10 Desktop, you see the /home/phablet get Mounted on the filesystem via mtp.. I haven't messed with the Windows Driver.. I messed with the google one and changed the pid and vid, and.. no device was found when I ran adb.. so.. perhaps mtp shuts down adb on the touchpad.. I think that was in the upstart file though.. mtp-server-bootup.conf, etc.


    MORE USEFUL NOTES

    How to copy files with novaterm?
    cat filename | novaterm put file:///put/full/destination/path/filename (push example) tested
    novaterm get file:///full/destination/path/filename (pull example) untested
    novaterm get file:///full/destination/path/filename > filename (pull example) untested

    How do I compile uimage-extract to extract a kernel.img and ramdisk.img from a uImage file (boot.img)?
    git clone https://github.com/jcsullins/moboot
    cd moboot/tools
    gcc -o uimage-extract uimage-extract.c -lz

    How do I extract the kernel image and initramfs from a uImage file?
    ./uimage-extract uImage.filename (from inside moboot tools folder)

    How to unpack and repack gzip ramdisk images?
    mkdir newramdisk
    cd newramdisk
    gunzip -c ../your-ramdisk-file | cpio -i
    make changes, next command is to pack a new ramdisk.img
    find . | cpio -o -H newc | gzip > ../newramdisk.img

    How to unpack and repack lzma ramdisk images? (I used lzma)
    mkdir newramdisk
    cd newramdisk
    lzma -dc ../newramdisk.img | cpio -i
    make changes, next command is to pack a new ramdisk.img
    find . | cpio -o -H newc | lzma > ../your-ramdisk-file

    How to create a moboot compatible kernel?
    mkimage -A arm -O linux -T kernel -C none -a 0x40208000 -e 0x40208000 -n "Kernel" -d kernel.img uImage
    mkimage -A arm -O linux -T ramdisk -C none -a 0x60000000 -e 0x60000000 -n "Image" -d ramdisk.img uRamdisk
    mkimage -A arm -O linux -T multi -a 0x40208000 -e 0x40208000 -C none -n "multi image" -d uImage:uRamdisk uImage.CyanogenMod.new

    How to connect to an open-wifi network without Unity as root?
    adb shell
    sudo su
    service network-manager stop
    iwconfig wlan0 essid "essid-you-want-to-connect-to"
    ifconfig wlan0 192.168.X.X netmask 255.255.255.0 up
    route add default gw 192.168.X.X
    sed -i '$ a nameserver 8.8.8.8' /etc/resolv.conf
    you should be on the net.

    How can I create my own saucy-preinstalled-touch-arm.tar.gz to go into the .zip? (from a runnng device)
    adb shell
    cd /data/ubuntu
    sudo tar --preserve-permissions -zcvf /sdcard/saucy-preinstalled-touch-armhf.tar.gz *
    exit
    adb pull /sdcard/saucy-preinstalled-touch-armhf.tar.gz .
    now put that file in the .zip.

    How do I untar the saucy-preinstalled-touch-armhf.tar.gz file?
    place saucy-preinstalled-touch-armhf.tar.gz in the folder you want to be in, and go to that folder in terminal
    mkdir rootfs
    cd rootfs
    sudo tar --preserve-permissions -zxvf ../saucy-preinstalled-touch-armhf.tar.gz
    sudo make your changes as root, be mindful of permissions.

    How do I swap my kernels to quad-boot? (With webOS)
    a)Before you install Ubuntu Touch, move a kernel from /boot to /media/internal
    novaterm
    mount -o remount,rw /boot
    mv /boot/uImage.Ubuntu13 /media/internal (or uImage.Ubuntu)
    mount -o remount,rw /boot
    b) After you install Ubuntu Touch, move it back, but remove ClockworkMod (know what you are doing are don't do this)
    novaterm
    mount -o remount,rw /boot
    mv /boot/uImage.ClockworkMod /media/internal
    mv /media/internal/uImage.Ubuntu13 /boot
    sync
    mount -o remount,ro /boot

    How can I run webOS Doctor after all this and just start all over factory clean?
    http://xdaforums.com/showthread.php?t=1564938 3rd post but I would skip the creation of /dev/store/cm-* partitions. Be sure to delete cm-data, cm-system, cm-cache, ut-data, ut-system, ut-cache, and ubuntu-store if you have it. Delete them all! Then recreate the lvm. If you need to recreate Android partitions do that with AcmeInstaller ie the usual way to install Android. You must start with WebOS 3.0.0 and then you can do 3.0.5. Be sure to say thanks on that post.



    Thanks to:
    Ogra (ubuntu-touch, huge thanks!), castrwilliam (ubuntu desktop rom), CalcProgrammer (ubuntu desktop rom), crimsonredmk (archlinux rom), Flemmard (cm team "resizing the boot partition would be stupid", yep), Mystikal57 (sound fixes in desktop that really helped get it going), JCSullins (moboot, cm team, all sorts of stuff), Dorregray (camera fixes I need to reimplement), w-flo (ubuntu-touch), drmarble (ubuntu-touch, cyanogenmod-touchpad, big thanks to him).. and others from the #ubuntu-touch irc channel and Ubuntu 11.04-13.10 threads, cyanogenmod team, etc... "I stand on the shoulders of giants"

    Look at the old Ubuntu Touch thread I started around page 17 for more in depth notes on what I did.
    OR
    https://github.com/jshafer817/UbuntuTouch

    I am NOT a developer!!!!
    View
    7
    J
    jshafer817
    Well, udev is working very well.. Boots up a lot faster.. Pulse now needs to be recompiled to support ACCEPT instead of ACCEPT4. Doing that now. THEN.. sound will play.. without a process taking up all the cpu power.

    Also... recompiled for /sys/class/backlight.. perhaps.. that will give us brightness control inside of Unity.
    View
    6
    J
    jshafer817
    I am giving ubuntu touch a shot.. Started it today. Could take awhile.

    Waiting for another project so I might as well use this time.
    View
    5
    J
    jshafer817
    Got the 09-21-2013 Image to stay in Unity8 with LightDM... as UT did this.. more like standard ubuntu.

    Network-Manager problems... and /run permissions... at the moment...

    What else.. recompiled ts_srv to be in debug mode. I played with these settings and it seemed to help, but that was on an older image, 1 out of 10 did not respond to a swipe but instead a double tap. Has to do with Delta_Max, but could be UT... Hasn't happened yet on this newer image..

    Big bug though.. network manager won't allow phablet to make changes..

    Oh yeah..
    service stop network-manager
    iwconfig wlan0 essid "tadaow"
    ifconfig wlan0 192.168.1.99 netmask 255.255.255.0 up
    route add default gw 192.168.1.1
    edit /etc/resolv.conf and add nameserver 8.8.8.8
    apt-get update
    upgrade....
    accountsservice camera-app gir1.2-gudev-1.0 libaccountsservice0 liblxc0
    libpam-systemd libsystemd-daemon-dev libsystemd-daemon0 libsystemd-id128-0
    libsystemd-id128-dev libsystemd-journal-dev libsystemd-journal0
    libsystemd-login-dev libsystemd-login0 libudev-dev libudev1 lxc lxc-dbg
    lxc-dev mediaplayer-app pulseaudio python-systemd python3-lxc
    systemd-services ubuntu-clock-app ubuntu-rssreader-app ubuntu-touch-session
    ubuntu-weather-app udev unity-scope-click

    Yes... See what happens. I will end up downgrading lxc.

    Probably time to recompile systemd and pulse with our patches.

    EDIT: Volume Control Buttons are working.
    View
    5
    J
    jshafer817
    Added accept4 to the kernel. No longer have to recompile udev or pulse.

    But.. we have a gstreamer codec issue... Working on this. This is good though. Video.. sort of plays now.
    View

New posts