In all those photos are shown the new product and the details of the phone !
Not be considered spam or advertising is shown only to understand the difference and the details.
Everybody are Welcome! :laugh::good:
MANY THANKS TO OUR MODERATORS TO OPEN AGAIN THIS THREAD !
More attention to the Xda-developers Rules: http://xdaforums.com/announcement.php?f=256
Many thanks to "SUPER ADMIN" MR. MIKE
Many thanks to all my Friends in the world that collaborate with me "always".
Many thanks in this dev thread to Cleopatra Bianchi & Bigrammy
XDA:DevDB Information Vernee Mix 2 Rebuild Official Firmware, Kernel for the Android General
A)For flashtool Use this flash to re alive your device in brick mode ..
Select all file in flashtool and make download Discharge the battery if you receive strange message from flashtool going the device in bootloop the battery will be down to zero .
1) Developer options --> OEM unlocking enabled and USB debugging enabled :
Tap on Settings --> About phone --> Tap Build number seven times.
2) To enter in Fastboot mode -->
Device off -->press Power + Level Volume ( + ) in the same time and you will see the selection FASTBOOT RECOVERY NORMAL
3)Unlock the bootloader:
Open Dos window with CMD comand ...
command to run in fastboot mode : fastboot oem unlock
(the device after the first reboot will enter in factory reset and will reset your device)
4)In adb command :
Copy all the firmware in adb folder....
5)Command to use : Fastboot flash [example system] [system.img] Do not use [ brachets]
Fastboot flash [example userdata] [userdata.img] Do not use [brachets ]
Fastboot flash [example recovery] [recovery.img] Do not use [ brachets]
ecc
Firmware for Vernee Mix version 4gb ram 64gb Rom Tested Android 7 MOLY.LR11.W1630.MD.MP.V9.3.P38,2017/10/31
Kernel Version 4.4.15
Build MIX_2_20171031
You will see the boot logo then it will stop and reboot again this is normal.
Wait for the phone to fully boot up this can take 10 > 15 mins
How suggested by Bigrammy .
New Details (only for 6gb version):
1)Delete the encrypt request;
2) Set up the english language like default;
3)Change colors menu.
4) New Kernel inside
i'm studing again this device i want to explain what i havefound to all of you:
1) Seems that device (vernee Mix) not want to connect and dialogue correctly with flashtool...i have tyied all the version in the web..
2)Seems fastboot mode is the good place to flash the firmware but is not easy for everyone.
3) Isn't only the Dogee mix have same firmware but i discovered that all the mix are similar except to the total amount of its memory
4) The sectors of the partitions :userdata and system are different from the previous devices descibed before.
5) the first partition and the last called sys1 & sys30 not are located in the Vernee mix2.
6) the firmware is rebuilded correctly and tested 27/11/2017 ---> post#2 ....
to be continue...
1) No One official Firmware found ----->My firmware rebuilded #3
2) No Root access for moment
3) No Recovery that mount the internal memory ,
I tryied to make reedback with scatter of Dogee mix and bluboo s1 but in this device seems not start at all the process and remain in partial brick mode o similar...
Size of the Vernee Memory
Code:
F:\adb>fastboot devices
NB45071511000001 fastboot
F:\adb>fastboot getvar all
(bootloader) max-download-size: 0x8000000
(bootloader) partition-size:flashinfo: 1000000
(bootloader) partition-type:flashinfo: raw data
(bootloader) partition-size:userdata: [COLOR=Red]32000000[/COLOR]
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:cache: 1b000000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:system: [COLOR=Red]f4800000[/COLOR]
(bootloader) partition-type:system: ext4
(bootloader) partition-size:tee2: b00000
(bootloader) partition-type:tee2: raw data
(bootloader) partition-size:tee1: 500000
(bootloader) partition-type:tee1: raw data
(bootloader) partition-size:logo: 800000
(bootloader) partition-type:logo: raw data
(bootloader) partition-size:boot: 1000000
(bootloader) partition-type:boot: raw data
(bootloader) partition-size:lk2: 100000
(bootloader) partition-type:lk2: raw data
(bootloader) partition-size:lk: 100000
(bootloader) partition-type:lk: raw data
(bootloader) partition-size:nvram: 500000
(bootloader) partition-type:nvram: raw data
(bootloader) partition-size:md3img: 500000
(bootloader) partition-type:md3img: raw data
(bootloader) partition-size:md1arm7: 300000
(bootloader) partition-type:md1arm7: raw data
(bootloader) partition-size:md1dsp: 400000
(bootloader) partition-type:md1dsp: raw data
(bootloader) partition-size:md1img: 1800000
(bootloader) partition-type:md1img: raw data
(bootloader) partition-size:proinfo: 300000
(bootloader) partition-type:proinfo: raw data
(bootloader) partition-size:sec1: 200000
(bootloader) partition-type:sec1: raw data
(bootloader) partition-size:seccfg: 800000
(bootloader) partition-type:seccfg: raw data
(bootloader) partition-size:protect2: 978000
(bootloader) partition-type:protect2: ext4
(bootloader) partition-size:protect1: 800000
(bootloader) partition-type:protect1: ext4
(bootloader) partition-size:metadata: 2000000
(bootloader) partition-type:metadata: raw data
(bootloader) partition-size:nvdata: 2000000
(bootloader) partition-type:nvdata: ext4
(bootloader) partition-size:nvcfg: 800000
(bootloader) partition-type:nvcfg: ext4
(bootloader) partition-size:frp: 100000
(bootloader) partition-type:frp: raw data
(bootloader) partition-size:expdb: 1400000
(bootloader) partition-type:expdb: raw data
(bootloader) partition-size:para: 80000
(bootloader) partition-type:para: raw data
(bootloader) partition-size:recovery: 1800000
(bootloader) partition-type:recovery: raw data
(bootloader) partition-size:boot_para: 100000
(bootloader) partition-type:boot_para: raw data
(bootloader) partition-size:preloader: 40000
(bootloader) partition-type:preloader: raw data
(bootloader) off-mode-charge: 1
(bootloader) warranty: yes
(bootloader) unlocked: no
(bootloader) secure: yes
(bootloader) kernel: lk
(bootloader) product: HCT6757_66_N
(bootloader) version-preloader:
(bootloader) version: 0.5
all: Done!!
finished. total time: 0.281s
F:\adb>
Please upload the original Dogee mix scatter file.
Please note we will also need the SPFlashTool logs if the rebuild of the scatter file is unsuccessful.
The SPFlashtool Log's can be found in your "C" drive /ProgramData/SP_FT_Logs
Tip: For text based files like the build.prop just rename it to build.prop.txt and then you can upload it to xda.
You can do the same with the log files eg: flashtool.log.txt
Please upload the original Dogee mix scatter file.
Please note we will also need the SPFlashTool logs if the rebuild of the scatter file is unsuccessful.
The SPFlashtool Log's can be found in your "C" drive /ProgramData/SP_FT_Logs
Tip: For text based files like the build.prop just rename it to build.prop.txt and then you can upload it to xda.
You can do the same with the log files eg: flashtool.log.txt
I will be getting mine in 2 weeks time so will be joining the band wagon here. Great to be part of the team.
Awesome! Let get the basic stuffs out first before talking about which custom ROMs you needed to install.
Cheers - -
I'm downloading the doogee mix firmware ...i will post here the scatter original file.
I have checked what Cleopatra suggested....the sectory of memory's the Vernee Mix is the same of Doogee Mix , almost the total size sector of each one i have checked and are the same...
Unfortunatly i don't know the start and end of each sector but i suggest that are the same.
I have downloaded the entire 1.2GB ROM to ensure I get the untouched scatter. You need to pull the one posted as those partitions calculations are way off.
My mistake it's fine
I have downloaded the entire 1.2GB ROM to ensure I get the untouched scatter.
You need to pull the one posted as those partitions calculations are way off.
If you check the total amount of the memory in each partitions seems egual
I Tryied several times to readback the memory partitions from the vernee mix but unfortunatly seems that in this device ....
after i have run the readback command from flashtool app and connected the usb cable .................
the phone enter in a sleep way, in a semi bricked place and the vernee mix turn on the red light like the recharge mode.
But isn't the recharge place, because the device is in off mode and the display not show the battery and the "Bips" sound are correct...
what all of you thinking about this situation place?
Thanks I got it already. :good:
The first 3 partitions were confusing me as they seemed to be wrong but maybe they are not after all
It would be impossible for me to explain the entire thing in easy english :laugh:
I will study the scatter tonight when I get home.
You say this scatter does not work with your device??
I notice that hanuma50 says to use DA-PL.bin as the download agent so did you try it with that set?
Thanks I got it already. :good:
The first 3 partitions were confusing me as they seemed to be wrong but maybe they are not after all
It would be impossible for me to explain the entire thing in easy english :laugh:
I will study the scatter tonight when I get home.
You say this scatter does not work with your device??
Big,
first thanks for your help and change opinions "always" .
Reload more times my last post because often i rewrite them....
About your english i mean try to use easy words....but is ok thanks!:good:
The readback not start read my last post at the end...
Thanks I got it already. :good:
The first 3 partitions were confusing me as they seemed to be wrong but maybe they are not after all
It would be impossible for me to explain the entire thing in easy english :laugh:
I will study the scatter tonight when I get home.
You say this scatter does not work with your device??
I notice that hanuma50 says to use DA-PL.bin as the download agent so did you try it with that set?
Yes i tryied several times with Flashtool version 5.1612 and the last version 5.17xx
If i use the download agent with flashtool 5.17xx i received the message:
"ERROR : STATUS_BROM_CMD_STARTCMD_FAIL /OxC00600001)
I repeat what i think...
Tryied several times to readback the memory partitions from the vernee mix but unfortunatly seems that in this device ....
after i have run the readback command from flashtool app and connected the usb cable .................
the phone enter in a sleep way, in a semi bricked place and the vernee mix turn on the red light like the recharge mode.
But isn't the recharge place, because the device is in off mode and the display not show the battery and the "Bips" sounds during the connection usb cable ..are correct...
what all of you thinking about this situation place?
Yes i tryied several times with Flashtool version 5.1612 and the last version 5.17xx
If i use the download agent i receive the message:
"ERROR : STATUS_BROM_CMD_STARTCMD_FAIL /OxC00600001)
Have you got the bluboo s1 scatter?
Also pull the flashtool version 5.17xx logs and upload here they are located "C" drive /ProgramData/SP_FT_Logs
Tip: For text based files like the build.prop and log files just rename it to build.prop.txt and then you can upload it to xda.
You can do the same with the log files eg: flashtool.log.txt
Yes i have tested the Doogee scatter files , of course ....seems it have the same sectors, so i use it .
This is the web link to the log files of flashtool: https://1drv.ms/u/s!Ak3omcbE1qj0fLER0w97Yuw26fs
One of these files are too big ....so i zipped them...
see you this evening:good::laugh:
Hello members, i did order the mix 2 and expect i will be delivered tuesday, as i read them mix2 is a clone of the doogee mix and this is really true
it would be a great help for us, i found a page with TWRP beta for the doogee maybe it will also work on the mix2 ?? {Mod edit: Link to paid services website removed. Oswald Boelcke, Senior Moderator}
So according my dear friend Cleopatra Bianchi i was able to rebuild the official firmware of Vernee Mix2
So has been only under a "Based on a insight by @Cleopatra Bianchi"
Sometimes the women know more than the devil !!
Many thanks also to my Friend in the time the Great @bigrammy
Soon the official Firmware for replace all yours device will be pubblished.
Soon will arrive the recoveries TWRP from Cleopatra and mine CWM ported from the Great Carliv...
:good:
In all those photos are shown the new product and the details of the phone !
Not be considered spam or advertising is shown only to understand the difference and the details.
Everybody are Welcome! :laugh::good:
MANY THANKS TO OUR MODERATORS TO OPEN AGAIN THIS THREAD !
More attention to the Xda-developers Rules: http://xdaforums.com/announcement.php?f=256
Many thanks to "SUPER ADMIN" MR. MIKE
Many thanks to all my Friends in the world that collaborate with me "always".
Many thanks in this dev thread to Cleopatra Bianchi & Bigrammy
XDA:DevDB Information Vernee Mix 2 Rebuild Official Firmware, Kernel for the Android General
i'm studing again this device i want to explain what i havefound to all of you:
1) Seems that device (vernee Mix) not want to connect and dialogue correctly with flashtool...i have tyied all the version in the web..
2)Seems fastboot mode is the good place to flash the firmware but is not easy for everyone.
3) Isn't only the Dogee mix have same firmware but i discovered that all the mix are similar except to the total amount of its memory
4) The sectors of the partitions :userdata and system are different from the previous devices descibed before.
5) the first partition and the last called sys1 & sys30 not are located in the Vernee mix2.
6) the firmware is rebuilded correctly and tested 27/11/2017 ---> post#2 ....
to be continue...
1) No One official Firmware found ----->My firmware rebuilded #3
2) No Root access for moment
3) No Recovery that mount the internal memory ,
I tryied to make reedback with scatter of Dogee mix and bluboo s1 but in this device seems not start at all the process and remain in partial brick mode o similar...
Size of the Vernee Memory
Code:
F:\adb>fastboot devices
NB45071511000001 fastboot
F:\adb>fastboot getvar all
(bootloader) max-download-size: 0x8000000
(bootloader) partition-size:flashinfo: 1000000
(bootloader) partition-type:flashinfo: raw data
(bootloader) partition-size:userdata: [COLOR=Red]32000000[/COLOR]
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:cache: 1b000000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:system: [COLOR=Red]f4800000[/COLOR]
(bootloader) partition-type:system: ext4
(bootloader) partition-size:tee2: b00000
(bootloader) partition-type:tee2: raw data
(bootloader) partition-size:tee1: 500000
(bootloader) partition-type:tee1: raw data
(bootloader) partition-size:logo: 800000
(bootloader) partition-type:logo: raw data
(bootloader) partition-size:boot: 1000000
(bootloader) partition-type:boot: raw data
(bootloader) partition-size:lk2: 100000
(bootloader) partition-type:lk2: raw data
(bootloader) partition-size:lk: 100000
(bootloader) partition-type:lk: raw data
(bootloader) partition-size:nvram: 500000
(bootloader) partition-type:nvram: raw data
(bootloader) partition-size:md3img: 500000
(bootloader) partition-type:md3img: raw data
(bootloader) partition-size:md1arm7: 300000
(bootloader) partition-type:md1arm7: raw data
(bootloader) partition-size:md1dsp: 400000
(bootloader) partition-type:md1dsp: raw data
(bootloader) partition-size:md1img: 1800000
(bootloader) partition-type:md1img: raw data
(bootloader) partition-size:proinfo: 300000
(bootloader) partition-type:proinfo: raw data
(bootloader) partition-size:sec1: 200000
(bootloader) partition-type:sec1: raw data
(bootloader) partition-size:seccfg: 800000
(bootloader) partition-type:seccfg: raw data
(bootloader) partition-size:protect2: 978000
(bootloader) partition-type:protect2: ext4
(bootloader) partition-size:protect1: 800000
(bootloader) partition-type:protect1: ext4
(bootloader) partition-size:metadata: 2000000
(bootloader) partition-type:metadata: raw data
(bootloader) partition-size:nvdata: 2000000
(bootloader) partition-type:nvdata: ext4
(bootloader) partition-size:nvcfg: 800000
(bootloader) partition-type:nvcfg: ext4
(bootloader) partition-size:frp: 100000
(bootloader) partition-type:frp: raw data
(bootloader) partition-size:expdb: 1400000
(bootloader) partition-type:expdb: raw data
(bootloader) partition-size:para: 80000
(bootloader) partition-type:para: raw data
(bootloader) partition-size:recovery: 1800000
(bootloader) partition-type:recovery: raw data
(bootloader) partition-size:boot_para: 100000
(bootloader) partition-type:boot_para: raw data
(bootloader) partition-size:preloader: 40000
(bootloader) partition-type:preloader: raw data
(bootloader) off-mode-charge: 1
(bootloader) warranty: yes
(bootloader) unlocked: no
(bootloader) secure: yes
(bootloader) kernel: lk
(bootloader) product: HCT6757_66_N
(bootloader) version-preloader:
(bootloader) version: 0.5
all: Done!!
finished. total time: 0.281s
F:\adb>
So according my dear friend Cleopatra Bianchi i was able to rebuild the official firmware of Vernee Mix2
So has been only under a "Based on a insight by @Cleopatra Bianchi"
Sometimes the women know more than the devil !!
Many thanks also to my Friend in the time the Great @bigrammy
Soon the official Firmware for replace all yours device will be pubblished.
Soon will arrive the recoveries TWRP from Cleopatra and mine CWM ported from the Great Carliv...
:good: