Bubble Breaker & Solitaire Full Cab

Search This thread

spikegotti

Senior Member
Mar 31, 2009
2,011
3
43
St. John
www.facebook.com
I have seen threads with requests for the default bubblebreaker & solitaire, but none of them actually worked and when they did, they had issues...

So I created this cab file which is also part of one of my rom's service pack, to install a clean Bubble Breaker & Solitaire
;)

note: only tested on wvga
 
  • Like
Reactions: Traace

Senax

Senior Member
Aug 27, 2009
373
46
Arnhem
ThanX a MillioN spikegotti!!

I've been looking for this since I've got my Topaz!~! Without much success I must add, apart from a few nice clones. Now I'll get ready to ditch a lot of 'm :D
 

Pharmako

Senior Member
Dec 23, 2009
101
7
Sofia
Did anybody try this in a qvga device 240x320 with manila 2d? Would it work?

First a correction : Previously I had typed "240x360", fast typing (late hours) mistake, my apologies.

Now to the matter in question:

Answer to myself and ony other lost souls that may end up reading this thread:

Solitaire is working fine and looking good in HTC TyTN -Herm200-) with WM 6.5 Build 23088, touch flo v2 Build 19191432.

Bubble Breaker is working but not looking good (instead of whole bubbles you get halves or squares). That's why I decided to make my own cabs from a clean WM 6.5 realease for QVGA.

If anybody is interested (both Solitaire and Bubble Breaker in separete cabs):

http://rapidshare.com/files/409242652/MSsolitaire.cab.html

http://rapidshare.com/files/409328143/BubbleBreaker.cab.html

Disclaimer: I'm an absolute noob here, so use at your own risk, not that I haven't tested it myself, of course :)
 
Last edited:
  • Like
Reactions: [Fenix]
G

GuestX00905

Guest
Thanks for this

Thanks for sharing this cab was looking all over for it. Just installed Valkyries new ROM for HD2 and wasn't included. Much obliged :D
 

L_traveler

Member
Jul 17, 2010
7
1
I am not a programmer and wanted to install this on my LG Fathom, however it appears that the setup.xml is adding a lot of messaging settings and adding a new wap for the phone.

Why?

Here is an sample of the other registry edits, what to they do?

<characteristic type="HKLM\Software\HTC\HTCMessaging">
<parm name="HTCDevice" value="1" datatype="integer" />
<parm name="EmailClassName" value="IPM.Note" datatype="string" />
<parm name="MMSClassName" value="IPM.MMS" datatype="string" />
<parm name="SMSClassName" value="IPM.SMStext" datatype="string" />
<parm name="VoiceMailClassName" value="IPM.VoiceMail" datatype="string" />
<parm name="ComposeFlag" value="0" datatype="integer" />
<parm name="CameraThreshold" value="30" datatype="integer" />
<parm name="PhotoThreshold" value="5" datatype="integer" />
<parm name="EnableKeyEvt" value="1" datatype="integer" />
<parm name="DisableCacheWhenLengthierMessage" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKCR\CLSID\{B7D01B9D-ACD8-48bf-AD4C-597521CB4221}\InprocServer32">
<parm name="" value="messagingnotification.dll" datatype="string" />
</characteristic>
<characteristic type="HKCR\CLSID\{A9879FBF-5FA9-48dd-94EC-3AE3D1F2D8F9}\InprocServer32">
<parm name="" value="messagingnotification.dll" datatype="string" />
</characteristic>
<characteristic type="HKLM\Security\PushRouter\Registrations\ByCTAndAppId\application/vnd.wap.mms-message;">
<parm name="" value="0068C573279EC901" datatype="string" />
</characteristic>
<characteristic type="HKLM\Security\PushRouter\Registrations\ByGenericId\0068C573279EC901">
<parm name="QueueId" value="1" datatype="integer" />
<parm name="Trust" value="2" datatype="integer" />
<parm name="RefCount" value="1" datatype="integer" />
<parm name="Params" value="mms" datatype="string" />
<parm name="Path" value="\Windows\PushClient.exe" datatype="string" />
<parm name="AppId" value="" datatype="string" />
<parm name="ContentTypes" value="application/vnd.wap.mms-message" datatype="string" />
<parm name="GenId" value="0068C573279EC901" datatype="string" />
</characteristic>
<characteristic type="HKLM\Services\MSG">
<parm name="Dll" value="MessagingService.dll" datatype="string" />
<parm name="Keep" value="1" datatype="integer" />
<parm name="Index" value="0" datatype="integer" />
<parm name="Order" value="9" datatype="integer" />
<parm name="FriendlyName" value="Message Service" datatype="string" />
<parm name="Prefix" value="MSG" datatype="string" />
<parm name="MaxPhoneLength" value="20" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Software\Jataayu\MMS\OEM\AudioVideoAmbiguousExtensions\.3g2">
<parm name="AudioMimeType" value="audio/3gp" datatype="string" />
<parm name="VideoMimeType" value="video/3g2" datatype="string" />
</characteristic>
<characteristic type="HKLM\Software\Jataayu\MMS\OEM\AudioVideoAmbiguousExtensions\.3gp">
<parm name="AudioMimeType" value="audio/3gp" datatype="string" />
<parm name="VideoMimeType" value="video/3gpp" datatype="string" />
</characteristic>
<characteristic type="HKLM\Software\Jataayu\MMS\OEM\AudioVideoAmbiguousExtensions\.mp4">
<parm name="AudioMimeType" value="audio/mp4" datatype="string" />
<parm name="VideoMimeType" value="video/mp4" datatype="string" />
</characteristic>
<characteristic type="HKLM\Software\Jataayu\MMS\OEM\Content-Types">
<parm name=".3gp" value="video/3gpp" datatype="string" />
<parm name=".3g2" value="video/3gpp2" datatype="string" />
<parm name=".vcs" value="text/x-vcalendar" datatype="string" />
<parm name=".dcf" value="application/vnd.oma.drm.content" datatype="string" />
<parm name=".wbmp" value="image/vnd.wap.wbmp" datatype="string" />
<parm name=".m4a" value="audio/m4a" datatype="string" />
<parm name=".qcp" value="audio/qcp" datatype="string" />
<parm name=".wav" value="audio/wav" datatype="string" />
<parm name=".midi" value="audio/midi" datatype="string" />
<parm name=".wma" value="audio/wma" datatype="string" />
<parm name=".aac" value="audio/aac" datatype="string" />
<parm name=".awb" value="audio/amr-wb" datatype="string" />
<parm name=".gif" value="image/gif" datatype="string" />
<parm name=".png" value="image/png" datatype="string" />
<parm name=".jpg" value="image/jpeg" datatype="string" />
</characteristic>
<characteristic type="HKLM\Software\Jataayu\MMS\OEM\File Extensions\audio/mpeg">
<parm name="DRMExtension" value=".mp3d" datatype="string" />
</characteristic>
<characteristic type="HKLM\Software\Jataayu\MMS\JSR">
<parm name="Enable" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Software\Jataayu\MMS\SP">
<parm name="LogBuffer" value="0" datatype="integer" />
<parm name="Logging" value="0" datatype="integer" />
<parm name="RRPreferredClass" value="1" datatype="integer" />
 

alexAG76

Member
Aug 3, 2009
6
0
Don't install wvga app on QVGA screen (e.g., HTC Apache 6700)

note: only tested on wvga[/QUOTE]

I can't uninstall it now. Looks like I'll have to hard-reset. I wish I had read further down about the QVGA version. :eek:
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    I have seen threads with requests for the default bubblebreaker & solitaire, but none of them actually worked and when they did, they had issues...

    So I created this cab file which is also part of one of my rom's service pack, to install a clean Bubble Breaker & Solitaire
    ;)

    note: only tested on wvga
    1
    Did anybody try this in a qvga device 240x320 with manila 2d? Would it work?

    First a correction : Previously I had typed "240x360", fast typing (late hours) mistake, my apologies.

    Now to the matter in question:

    Answer to myself and ony other lost souls that may end up reading this thread:

    Solitaire is working fine and looking good in HTC TyTN -Herm200-) with WM 6.5 Build 23088, touch flo v2 Build 19191432.

    Bubble Breaker is working but not looking good (instead of whole bubbles you get halves or squares). That's why I decided to make my own cabs from a clean WM 6.5 realease for QVGA.

    If anybody is interested (both Solitaire and Bubble Breaker in separete cabs):

    http://rapidshare.com/files/409242652/MSsolitaire.cab.html

    http://rapidshare.com/files/409328143/BubbleBreaker.cab.html

    Disclaimer: I'm an absolute noob here, so use at your own risk, not that I haven't tested it myself, of course :)
    1
    I'm glad to help. :)