Full factory restore ODIN with radios (both LTE and CDMA), kernel and recovery. This will bring you back to the current unrooted 4.0.2 release of Android for the Galaxy Nexus.
*** WARNINGS AND NOTICES ***
** Flashing this will wipe ALL userdata and your sdcard partition!! Make a BACKUP AND COPY IT OFF OF YOUR PHONE!!!
** It will bring your device back to stock running Android 4.0.2 Build ICL53F with EK05 CDMA and EK02 LTE radios.
** It WILL NOT relock the boot loader. You must relock your bootloader after flashing this ODIN to be 100% factory
Instructions:
1. This assumes that you already have the Samsung driver installed, the phone is unplugged from the computer and turned off.
2. Download the 7zip file and Odin3.
3. Open Odin3
4. Connect the phone to the computer
5. Enter download mode (hold the vol down key and press power). Odin3 should now see the phone.
6. In Odin3 click 'PDA' and select the PDA ODIN file from the archive
7. In Odin3 click 'PHONE' and select the PHONE ODIN file from the archive
8. Click Start! After it is completed the phone will reboot. The Odin3 screen should look like at attached screen.
File: VzW-SCHi515-FactoryODIN-ICL53F-4.0.2.7z
Link: http://bit.ly/zEVmoP
md5 : b94776ca0102f8be02ccea90dcaaf271
Size: 158 MB
File: Odin3_v1.3.exe
Link: http://bit.ly/wcTDuO
md5 : a93c47f0589153249f453375be7d8643
Size: 406 KB
Inside the 7zip file:
File: VzW-PDA-ODIN-I515EL03_ICL53F_signed.tar
md5 : 6ff33e5b0d6b2da1c13824e0d90e97d9
File: VzW-PHONE-ODIN-SCH-I515.EK02_LTE.tar
md5 : b8d16828a1b777e4938834cba9e8f601
*** WARNINGS AND NOTICES ***
** Flashing this will wipe ALL userdata and your sdcard partition!! Make a BACKUP AND COPY IT OFF OF YOUR PHONE!!!
** It will bring your device back to stock running Android 4.0.2 Build ICL53F with EK05 CDMA and EK02 LTE radios.
** It WILL NOT relock the boot loader. You must relock your bootloader after flashing this ODIN to be 100% factory
Instructions:
1. This assumes that you already have the Samsung driver installed, the phone is unplugged from the computer and turned off.
2. Download the 7zip file and Odin3.
3. Open Odin3
4. Connect the phone to the computer
5. Enter download mode (hold the vol down key and press power). Odin3 should now see the phone.
6. In Odin3 click 'PDA' and select the PDA ODIN file from the archive
7. In Odin3 click 'PHONE' and select the PHONE ODIN file from the archive
8. Click Start! After it is completed the phone will reboot. The Odin3 screen should look like at attached screen.
File: VzW-SCHi515-FactoryODIN-ICL53F-4.0.2.7z
Link: http://bit.ly/zEVmoP
md5 : b94776ca0102f8be02ccea90dcaaf271
Size: 158 MB
File: Odin3_v1.3.exe
Link: http://bit.ly/wcTDuO
md5 : a93c47f0589153249f453375be7d8643
Size: 406 KB
Inside the 7zip file:
File: VzW-PDA-ODIN-I515EL03_ICL53F_signed.tar
md5 : 6ff33e5b0d6b2da1c13824e0d90e97d9
File: VzW-PHONE-ODIN-SCH-I515.EK02_LTE.tar
md5 : b8d16828a1b777e4938834cba9e8f601