Supcase Hybrid/Gel Case for M8

Search This thread

bigballa

Senior Member
Feb 24, 2009
866
90
Atlanta
www.twitter.com
I got this case and was amazed by the great fit it had to the phone! It arrived in some great packaging and was so happy they had easy to remove protective film on the case. Other products have me peeling at it for 20-30 minutes sometimes to get it all off the clear pieces of the case.

I put it on the phone and it slipped right in with that reassuring "snap" sound once the lip of the case came to the front of the device. I have a bodyguardz glass shield on my phone and the lip on the case doesn't interfere with it at all! the sides of the gel feel firm and don't warp or bend away so easily which keeps everything smooth and easy to use.

My only problem is the clear piece on the back. It came with scratches and defects on it. Also the cut out for the secondary mic isnt correct. It's off and the mic sits at the bottom right of the cut out. When holding the case, i place my pinky finger underneath the phone near the usb and headphone cut outs and the gel cuts are SHARP! It feels like I will cut my finger but that won't happen. But it is VERY uncomfortable. It hasn't caused any problems but these three issues have only left it from being great.

Case & BodyGuardz Pure Glass

EDIT:
I also ordered these:
SUPCASE All New HTC One M8 Case - Unicorn Beetle Premium Hybrid Protective Case for HTC One 2014 (Frost Clear/Black) &
URBAN ARMOR GEAR Case for HTC One (M8), Slate

Once I get these i will post pics and impressions also.
 

Attachments

  • WP_20140409_01_00_48_Pro.jpg
    WP_20140409_01_00_48_Pro.jpg
    158.4 KB · Views: 500
  • WP_20140409_01_00_55_Pro.jpg
    WP_20140409_01_00_55_Pro.jpg
    209.1 KB · Views: 457
  • WP_20140409_01_01_17_Pro.jpg
    WP_20140409_01_01_17_Pro.jpg
    185.8 KB · Views: 451
  • WP_20140409_01_01_27_Pro.jpg
    WP_20140409_01_01_27_Pro.jpg
    123.1 KB · Views: 413
  • WP_20140409_01_01_49_Pro.jpg
    WP_20140409_01_01_49_Pro.jpg
    217.8 KB · Views: 380
  • WP_20140409_01_01_56_Pro.jpg
    WP_20140409_01_01_56_Pro.jpg
    171.8 KB · Views: 380
  • WP_20140409_01_02_29_Pro.jpg
    WP_20140409_01_02_29_Pro.jpg
    114.4 KB · Views: 332
  • WP_20140409_01_02_44_Pro.jpg
    WP_20140409_01_02_44_Pro.jpg
    120.2 KB · Views: 326
Last edited:
  • Like
Reactions: Sckank and h3ck

Jmack3d

Member
Apr 16, 2014
18
3
I have the same case currently. Really love the fit and feel. Also the fact that the back is clear and not frosted was my main buying point. I really feel the m8 needs to be shown off, its by far the most attractive phone I've had or seen.

Sent from my HTC6525LVW using Tapatalk
 

h3ck

Senior Member
Oct 7, 2007
471
127
Otizzle
I have this case as well and the fit and finish is very very good. It is very form fitting and doesn't add much bulk. Also, the TPU is extremely clear compared to other 'clear' TPU cases I've seen. I'll be adding a decal to the back of my phone and it will be able to show through really nice with this case.
 

tchybrid

Member
Sep 12, 2009
17
1
i just got this case yesterday and i love the fact that is doesn't add much bulk, definately shows off the aluminum finish, and looks great. my only issue with it is that it kind of bows on the upper and lower portion of the phone and doesn't sluggly the upper and lower sections of the phone. hopefully over time and with the heat from being it my pocket it will correct itself. other then that, love the case! definately worth the little money i actually paid for it. =)
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    I got this case and was amazed by the great fit it had to the phone! It arrived in some great packaging and was so happy they had easy to remove protective film on the case. Other products have me peeling at it for 20-30 minutes sometimes to get it all off the clear pieces of the case.

    I put it on the phone and it slipped right in with that reassuring "snap" sound once the lip of the case came to the front of the device. I have a bodyguardz glass shield on my phone and the lip on the case doesn't interfere with it at all! the sides of the gel feel firm and don't warp or bend away so easily which keeps everything smooth and easy to use.

    My only problem is the clear piece on the back. It came with scratches and defects on it. Also the cut out for the secondary mic isnt correct. It's off and the mic sits at the bottom right of the cut out. When holding the case, i place my pinky finger underneath the phone near the usb and headphone cut outs and the gel cuts are SHARP! It feels like I will cut my finger but that won't happen. But it is VERY uncomfortable. It hasn't caused any problems but these three issues have only left it from being great.

    Case & BodyGuardz Pure Glass

    EDIT:
    I also ordered these:
    SUPCASE All New HTC One M8 Case - Unicorn Beetle Premium Hybrid Protective Case for HTC One 2014 (Frost Clear/Black) &
    URBAN ARMOR GEAR Case for HTC One (M8), Slate

    Once I get these i will post pics and impressions also.