[Q] Flashed the wrong software, bricked... soft I hope

Was updating my Note 2 and accidentally hooked up the Note 3 instead, needless to say it failed. I was running 4.3 and here is what is on my download screen

ODIN MODE
PRODUCT NAME: SM:M900T
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK 0X0
KNOX WARRANTY VOID 0X1
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P2
WRITE PROTECTION: ENABLE

Okay I know I did a really dumb thing, but it happens.... is this fixable?

Kies does not recognize it in recovery mode
all I have is download mode, will boot no further.

I have been reading a bit about PIT files but all the 4.3 PIT file links I find are dead.


When trying an Oden flash I get
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> sbl1.mbn
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)

And in download mode shows
SW REV CHECK FAIL : [sbl1] Fused 2 > Binary 1

Thanks

toastido said:

This part tells the whole story. You're going to have to flash kit kat. Why? The Fused value is higher than 4.3. Grab the latest 4.4.2 for the n900t from sammobile and flash that and you should be OK.


Sent from my leanKernel 2.4 powered stock 4.4.2 SM-N900T

Click to expand...

Click to collapse

Thanks, looking for the right version for my phone and unable to find it..looking now.

Found it.. downloading now.. thanks

Solved, thanks toastido, the factory ROM worked like a charm. Phone working just fine.