Is your DEFY/DEFY+ bricked??

Search This thread

janeindiran

Senior Member
Nov 13, 2011
962
749
Coimbatore
JIUI v4(MIUI v4) & JWP7(Windows Phone 7 MOD): http://xdaforums.com/showthread.php?p=26890050#post26890050


Is your DEFY / DEFY+ bricked??

FLASHING WITH STOCK ROM

1.Download and install usb driver from here http://www.motorola.com/staticfiles...al_Drivers/MotoHelper_2.1.40_Driver_5.5.0.exe

2.Download the sbf file from here
DEFY:http://sbf.droid-developers.org/umts_jordan/list.php (Based on your choice)

DEFY+: http://sbf.droid-developers.org/umts_jordanplus/list.php (Based on your choice)

3.Download RSD Lite from here http://www.multiupload.nl/8KGA2FPSMI

4.Remove your battery.

5.Press and hold power button and vol + button.

6.Put the battery back holding those buttons.

7.Now your phone will start and a blank screen will appear, now release those buttons. It will show the Bootloader.

8.Connect your phone via USB,now bootloader should display Transfer Mode:USB.(Drivers might install in your PC.If it install,wait till installation completes).

9.Open RSD Lite as administrator.

10.Hit show devies. Now your device must be displayed(If not drivers were not installed. Check for it.)

11.Now choose the sbf file.

12.Hit start. Be patient it will take some time.

13.Sometimes your phone reboots automatically and result column will say pass. If that doesn't happen,it will ask you to reboot manaully and your phone will be stuck in MOTO logo.
- Now remove your USB cable and remove battery. Hold power button and vol + button, you will get that screen.
- Now connect usb, now it result should say pass.
- Press the power button and start the phone. First boot will take some time (Min of 10 minutes or more).

If you are still stuck in bootloop

1.Remove your battery.

2.Hold the power button and vol - and put the battery.

3.You will enter into Motorola stock recovery.

4.Give factory rest and wipe cache.

5.Reboot your phone. This time it should work, else one again flash the sbf using RSD Lite.


ANY BROKEN LINKS!! PLEASE REPORT.
 
Last edited:

omarvin

Member
Nov 11, 2010
28
7
São Paulo
I had already done all that, all the steps correctly, and the battery 100%.

drivers are updated but the problem is when I enter in the recovery mode <3e> I can not access any of the four options (reboot, apply recovery, wipe data and wipe cache) can change options but never confirmed, it seems that does not receive commands the power button.

below in yellow I see the following message :

E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/caller
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log


9dpkeq.jpg


also used the Chinese ROM to downgrade boot
Seriously, to solve this has to be Ninja :(
 
Last edited:
  • Like
Reactions: unixr0cket

janeindiran

Senior Member
Nov 13, 2011
962
749
Coimbatore
I had already done all that, all the steps correctly, and the battery 100%.

drivers are updated but the problem is when I enter in the recovery mode <3e> I can not access any of the four options (reboot, apply recovery, wipe data and wipe cache) can change options but never confirmed, it seems that does not receive commands the power button.

below in yellow I see the following message :




9dpkeq.jpg


also used the Chinese ROM to downgrade boot
Seriously, to solve this has to be Ninja :(


Try pressing both vol+ and vol- for selection. If doesn't work, try flashing Retail British rom in from that link. It will work i used that when my DEFY got bricked. It will work. Give it a try, you won't be disappointed.
 

art-jcd

Member
Mar 20, 2012
24
6
Paraná
I had already done all that, all the steps correctly, and the battery 100%.

drivers are updated but the problem is when I enter in the recovery mode <3e> I can not access any of the four options (reboot, apply recovery, wipe data and wipe cache) can change options but never confirmed, it seems that does not receive commands the power button.

below in yellow I see the following message :




9dpkeq.jpg


also used the Chinese ROM to downgrade boot
Seriously, to solve this has to be Ninja :(
touch it..use touchscreen..if we are talking about the same chinese ROM (for me525).
Cya

PD: sorry for my spanglish.
PD2:you dont need to use that recovey... 1- root :
http://dl.dropbox.com/u/10868750/SuperOneClickv2.3.3-ShortFuse.zip or
http://dl.dropbox.com/u/10868750/Super One Click 2.1.1.zip
2: use new recovery : http://dl.dropbox.com/u/10868750/SndInitDefy_2.3.apk (you dont need wifi/3g for instalation with this release)
3: use it.
 
Last edited:
  • Like
Reactions: omarvin

omarvin

Member
Nov 11, 2010
28
7
São Paulo
Try pressing both vol+ and vol- for selection. If doesn't work, try flashing Retail British rom in from that link. It will work i used that when my DEFY got bricked. It will work. Give it a try, you won't be disappointed.

when I press the two buttons at the same time, back on the previous screen (with the "Android +!") push the two buttons toggles in and out of the recovery options.

I have a Bayer Defy MB525. and was no downgrade, do not know why this so, because I was with the Ms2ginger before the problem

the link has 3 versions of british retail, I installed the second
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB02C.0R_USAJORDANRTGB_P035_A011_HWp3_Service1FF.sbf.gz

but it is no boot, I'll try the latest version (or all if necessary)
anyway, thanks for the help.

______________________________

touch it..use touchscreen..if we are talking about the same chinese ROM (for me525).
Cya

PD: sorry for my spanglish.
PD2:you dont need to use that recovey... 1- root :
http://dl.dropbox.com/u/10868750/SuperOneClickv2.3.3-ShortFuse.zip or
http://dl.dropbox.com/u/10868750/Super One Click 2.1.1.zip
2: use new recovery : http://dl.dropbox.com/u/10868750/SndInitDefy_2.3.apk (you dont need wifi/3g for instalation with this release)
3: use it.

Thank's art-jcd but the Chinese do not start, black screen only ... This recovery does not accept touch screen

... I know all the procedures and installation root, the problem is I can not apply the wipes

know what to do, just do not know how to do :(
 
  • Like
Reactions: unixr0cket

omarvin

Member
Nov 11, 2010
28
7
São Paulo
SAMHUI94 ... Same Problem ?? (Click Thank's :rolleyes:)

I think many people will still go through the same situation, a lot of confusion between kernel.

I applied last sbf british proposed by janeindiran, but it did not work

my Defy is MB525 (Bayer) can only do turn-on with the ROM DEFYPLUS_U3_4.5.1 134_DFP-231 I think is the Nordic ...

... does anyone know if there other tools to try access the recovery menu?

Sorry for the Poor English :eek:
 

janeindiran

Senior Member
Nov 13, 2011
962
749
Coimbatore
SAMHUI94 ... Same Problem ?? (Click Thank's :rolleyes:)

I think many people will still go through the same situation, a lot of confusion between kernel.

I applied last sbf british proposed by janeindiran, but it did not work

my Defy is MB525 (Bayer) can only do turn-on with the ROM DEFYPLUS_U3_4.5.1 134_DFP-231 I think is the Nordic ...

... does anyone know if there other tools to try access the recovery menu?


If you flash the rom all data will be lost. Why are you try to access recovery menu. Try this:JRDNEM_U3_3.4.2_177-003_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB03A.0R_PDS03C_USAJRDNFRYORTGB_P019_A010_HWp3_Service1FF.sbf.gz

Don't enter recovery until first boot gets completed. Usually recovery does show those messages.

Tell whether it works??
 
Last edited:

omarvin

Member
Nov 11, 2010
28
7
São Paulo
until now recovery always showing this message, i ever waiting for the end of RSD but didn't work ...

My bootloader is locked, I cannot downgrade, so I think the Defy ROM U32xx or U33xx not will work, I tried several but nothing happens, the red logo appears, enable recovery (corrupted as shown in picture) and stay in bootloop only when i flash 4.5.1-134_DFP-231xx

I Change to RSD Lite 5.6 - Win7(5.5.0 x64 Drivers), Win XP (with 5.5.0 x86 Drivers) <<< All Updated

A N D ...

Nada, Nothing !

in the past i loved motorola, today i HATE, my next Android only with unlocked bootloader


i think theres no Ninja who can help me :(

BTW : Thanks a Lot !
 
Last edited:

kelbygreen

Senior Member
Apr 18, 2012
110
23
Newcastle
you might of upgraded the kernel to high. I tried to install 231 and it failed and I tried so many roms with all failing! I flashed with a 2311 rom and it worked.

Not sure if you used this kernel but anything lower will not work. Also you cannot root 231.

If you have 231 have a read of this link to root it

http://xdaforums.com/showthread.php?t=1542956

You should be able flash them threw RSD lite it wone get you back to stock rom but it will get your phone working.

If you know you dont have 231 kernel I would try other options first as you cant downgrade from it thats why no other roms would work for me.
 

janeindiran

Senior Member
Nov 13, 2011
962
749
Coimbatore
I had already done all that, all the steps correctly, and the battery 100%.

drivers are updated but the problem is when I enter in the recovery mode <3e> I can not access any of the four options (reboot, apply recovery, wipe data and wipe cache) can change options but never confirmed, it seems that does not receive commands the power button.

below in yellow I see the following message :




9dpkeq.jpg


also used the Chinese ROM to downgrade boot
Seriously, to solve this has to be Ninja :(

See this video tutorial: http://www.youtube.com/watch?v=Vd9EjgvcbXY
 
  • Like
Reactions: jalal-jap

omarvin

Member
Nov 11, 2010
28
7
São Paulo
you might of upgraded the kernel to high. I tried to install 231 and it failed and I tried so many roms with all failing! I flashed with a 2311 rom and it worked.

Not sure if you used this kernel but anything lower will not work. Also you cannot root 231.

If you have 231 have a read of this link to root it

http://xdaforums.com/showthread.php?t=1542956

You should be able flash them threw RSD lite it wone get you back to stock rom but it will get your phone working.

If you know you dont have 231 kernel I would try other options first as you cant downgrade from it thats why no other roms would work for me.

exactly, I'm caught in the 231 kernel, I can not start any rom with previous kernel, always boot error

the problem is unable to apply or wipes and select the "update.zip" within the original bootloader, none of these basic steps work for me, I need a 231 sbf with an alternative recovery or otherwise applying the wipes, I think the system is confusing, I do not know


I've done it over 100 times :eek: ... tks !
 

thebluehq

Member
Feb 18, 2012
33
2
help me, MB525 is brick

Hi all,
my phone has brick, pls give a link for download fixed-sbf, i find in forum and all link died
 

janeindiran

Senior Member
Nov 13, 2011
962
749
Coimbatore
i use DEFY MB 525, i try but no stock recovery, flash by RSD lite but can't boot. it no move from text "android".
maybe i must flash sbf fixed but i can't download because all link are died

This is british retail:JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_USAJRD NEMARAB1B8RTGB02C.0R_USAJORDANRTGB_P035_A011_HWp3_ Service1FF.sbf.gz


You can find more links in page 1 of this thread.
 

SAMHUI94

Senior Member
Apr 25, 2012
59
2
hong kong
i am using RSD lite but the results of 4 sbf are all fail, some are even cant make a start.
how can i deal with it?:mad:
OR some sbf are finished flashing in less than a second~"~
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 68
    JIUI v4(MIUI v4) & JWP7(Windows Phone 7 MOD): http://xdaforums.com/showthread.php?p=26890050#post26890050


    Is your DEFY / DEFY+ bricked??

    FLASHING WITH STOCK ROM

    1.Download and install usb driver from here http://www.motorola.com/staticfiles...al_Drivers/MotoHelper_2.1.40_Driver_5.5.0.exe

    2.Download the sbf file from here
    DEFY:http://sbf.droid-developers.org/umts_jordan/list.php (Based on your choice)

    DEFY+: http://sbf.droid-developers.org/umts_jordanplus/list.php (Based on your choice)

    3.Download RSD Lite from here http://www.multiupload.nl/8KGA2FPSMI

    4.Remove your battery.

    5.Press and hold power button and vol + button.

    6.Put the battery back holding those buttons.

    7.Now your phone will start and a blank screen will appear, now release those buttons. It will show the Bootloader.

    8.Connect your phone via USB,now bootloader should display Transfer Mode:USB.(Drivers might install in your PC.If it install,wait till installation completes).

    9.Open RSD Lite as administrator.

    10.Hit show devies. Now your device must be displayed(If not drivers were not installed. Check for it.)

    11.Now choose the sbf file.

    12.Hit start. Be patient it will take some time.

    13.Sometimes your phone reboots automatically and result column will say pass. If that doesn't happen,it will ask you to reboot manaully and your phone will be stuck in MOTO logo.
    - Now remove your USB cable and remove battery. Hold power button and vol + button, you will get that screen.
    - Now connect usb, now it result should say pass.
    - Press the power button and start the phone. First boot will take some time (Min of 10 minutes or more).

    If you are still stuck in bootloop

    1.Remove your battery.

    2.Hold the power button and vol - and put the battery.

    3.You will enter into Motorola stock recovery.

    4.Give factory rest and wipe cache.

    5.Reboot your phone. This time it should work, else one again flash the sbf using RSD Lite.


    ANY BROKEN LINKS!! PLEASE REPORT.
    3

    Ok. You can still access Stock recovery by holding vol- and power button. Remove your battery. Hold those buttons and put the battery. wait till you enter into stock recovery.(A caution symbol will appear). now press both volume keys together. you will enter into stock recover menu, now select wipe date/factory reset.
    3
    I had already done all that, all the steps correctly, and the battery 100%.

    drivers are updated but the problem is when I enter in the recovery mode <3e> I can not access any of the four options (reboot, apply recovery, wipe data and wipe cache) can change options but never confirmed, it seems that does not receive commands the power button.

    below in yellow I see the following message :




    9dpkeq.jpg


    also used the Chinese ROM to downgrade boot
    Seriously, to solve this has to be Ninja :(


    Try pressing both vol+ and vol- for selection. If doesn't work, try flashing Retail British rom in from that link. It will work i used that when my DEFY got bricked. It will work. Give it a try, you won't be disappointed.
    2
    you might of upgraded the kernel to high. I tried to install 231 and it failed and I tried so many roms with all failing! I flashed with a 2311 rom and it worked.

    Not sure if you used this kernel but anything lower will not work. Also you cannot root 231.

    If you have 231 have a read of this link to root it

    http://xdaforums.com/showthread.php?t=1542956

    You should be able flash them threw RSD lite it wone get you back to stock rom but it will get your phone working.

    If you know you dont have 231 kernel I would try other options first as you cant downgrade from it thats why no other roms would work for me.
    2
    SAMHUI94 ... Same Problem ?? (Click Thank's :rolleyes:)

    I think many people will still go through the same situation, a lot of confusion between kernel.

    I applied last sbf british proposed by janeindiran, but it did not work

    my Defy is MB525 (Bayer) can only do turn-on with the ROM DEFYPLUS_U3_4.5.1 134_DFP-231 I think is the Nordic ...

    ... does anyone know if there other tools to try access the recovery menu?


    If you flash the rom all data will be lost. Why are you try to access recovery menu. Try this:JRDNEM_U3_3.4.2_177-003_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB03A.0R_PDS03C_USAJRDNFRYORTGB_P019_A010_HWp3_Service1FF.sbf.gz

    Don't enter recovery until first boot gets completed. Usually recovery does show those messages.

    Tell whether it works??