I'll start by saing that all credits go to :good: pershoot :good: So be sure to thank him !!
INFO
http://droidbasement.com/db-blog/
This is Android 4.2.2 (Jelly Bean) + CM10.1 for the Samsung Galaxy Tab 10.1v
!! DOWNLOAD / NIGHTLIES ARE NOW AVAILABLE !!
http://get.cm/?device=p3
INSTALLATION INSTRUCTIONS
/!\ Before doing anything make sure your bootloader is unlocked and you have a rooted device!
1. Backup your apps+data using Titanium Backup.
2. Go to http://get.cm/?device=p3
3. Download 'recovery.tar.md5' to your PC if you don't have it yet. It's Clockworkmod 6.0.1.0 (latest version). If it's not available on the above location, it's also attached to this post.
4. Download 'cm-10.1.......zip' and put it in internal storage.
5. Download the latest 'gapps-jb-*-signed.zip' from http://goo.im/gapps and put it in internal storage. gapps-minimal-jb-20121212-signed.zip has been confirmed to work fine.
6. a. Flash recovery.tar.md5 on your device using ODIN3 (go into downloading mode, wait for USB connected on screen, then select the file using PDA and click Start)
6. b. You can also use fastboot (for some reason I prefer this method). Just extract the recovery.img from 'recovery.tar.md5' and then flash it using fastboot ("fastboot flash recovery recovery.img" (permanent on device) and/or "fastboot boot recovery.img" (just boot it from pc))
7. Once in recovery: clean cache & clean dalvik cache. (I did a full wipe to be sure I don't report bugs to pershoot which are linked to data problems).
8. Flash the ROM.
9. Flash gapps.
10. Reboot
11. Enjoy your ROM :fingers-crossed:
12. Put back all your apps (using batch Titanium Backup) but don't restore system apps.
13. You're done!
If you need to flash the P4 modem:
1. Get ODIN 1.85
2. Get the Samsung drivers "SAMSUNG_USB_Driver_for_Mobile_Phones_v1_3_2300_0" (google it)
3. Install the driver for Tab
4. Download the modem image from pershoot's p3 repository
5. Boot into bootloader (press power and hold volume-up and volume-down at the same time, then select Downloading).
6. Start ODIN (you should see the first block become yellow on the screen => means your device is connected)
7. Select PDA and browse to the modem file
8. Flash it
9. You're done. Make sure you got the correct RIL by flashing the latest image.
WORKING
• bluetooth
• browser
• back camera (8MP)
• gps
• install/move apps on sd card
• mobile data 3g/2g
• rotation
• sound (notifications, calls, ringtones, alarm, music)
• superuser
• MTP
• video playback
• vibration
• wifi
• youtube
• front camera
BUGS
• none! If you find one, please post them in this thread!
INFO
http://droidbasement.com/db-blog/
This is Android 4.2.2 (Jelly Bean) + CM10.1 for the Samsung Galaxy Tab 10.1v
!! DOWNLOAD / NIGHTLIES ARE NOW AVAILABLE !!
http://get.cm/?device=p3
INSTALLATION INSTRUCTIONS
/!\ Before doing anything make sure your bootloader is unlocked and you have a rooted device!
1. Backup your apps+data using Titanium Backup.
2. Go to http://get.cm/?device=p3
3. Download 'recovery.tar.md5' to your PC if you don't have it yet. It's Clockworkmod 6.0.1.0 (latest version). If it's not available on the above location, it's also attached to this post.
4. Download 'cm-10.1.......zip' and put it in internal storage.
5. Download the latest 'gapps-jb-*-signed.zip' from http://goo.im/gapps and put it in internal storage. gapps-minimal-jb-20121212-signed.zip has been confirmed to work fine.
6. a. Flash recovery.tar.md5 on your device using ODIN3 (go into downloading mode, wait for USB connected on screen, then select the file using PDA and click Start)
6. b. You can also use fastboot (for some reason I prefer this method). Just extract the recovery.img from 'recovery.tar.md5' and then flash it using fastboot ("fastboot flash recovery recovery.img" (permanent on device) and/or "fastboot boot recovery.img" (just boot it from pc))
7. Once in recovery: clean cache & clean dalvik cache. (I did a full wipe to be sure I don't report bugs to pershoot which are linked to data problems).
8. Flash the ROM.
9. Flash gapps.
10. Reboot
11. Enjoy your ROM :fingers-crossed:
12. Put back all your apps (using batch Titanium Backup) but don't restore system apps.
13. You're done!
If you need to flash the P4 modem:
1. Get ODIN 1.85
2. Get the Samsung drivers "SAMSUNG_USB_Driver_for_Mobile_Phones_v1_3_2300_0" (google it)
3. Install the driver for Tab
4. Download the modem image from pershoot's p3 repository
5. Boot into bootloader (press power and hold volume-up and volume-down at the same time, then select Downloading).
6. Start ODIN (you should see the first block become yellow on the screen => means your device is connected)
7. Select PDA and browse to the modem file
8. Flash it
9. You're done. Make sure you got the correct RIL by flashing the latest image.
Video made by SjPedro22
• bluetooth
• browser
• back camera (8MP)
• gps
• install/move apps on sd card
• mobile data 3g/2g
• rotation
• sound (notifications, calls, ringtones, alarm, music)
• superuser
• MTP
• video playback
• vibration
• wifi
• youtube
• front camera
BUGS
• none! If you find one, please post them in this thread!
Attachments
Last edited: