Asukal's MUI (Multilingual User Interface) for the HTC Hermes

shunsai · May 26, 2007

khammo01 · May 26, 2007

If I get some time in the next few weeks (50% chance), I will see if I can repackage some of Asukal's original CAB files to avoid requiring post-installation patches and to reduce the number of separate cab files (which would also reduce memory space required).

....if Asukal is OK with this...

Zgembo · May 26, 2007

Could you repack LetsJapanNo5 & IME31J_QVGA together?

Also, anybody have problems with MMSLite on WM6 ROMs?

Asukal · May 27, 2007

PLS DONT INSTAL or USE on Xo1H <Toshiba Device>

this is not compatible for Toshiba or any other device with WM6.

Zgembo said:
Could you repack LetsJapanNo5 & IME31J_QVGA together?

Also, anybody have problems with MMSLite on WM6 ROMs?

hi, thanks guys,
and i have merged Lets Japan and IME long time ago for Test

i will find the file where i stored,, so many files in my HDD,
and can not remenber that.(not organized my PC

Asukal · May 27, 2007

khammo01 said:
If I get some time in the next few weeks (50% chance), I will see if I can repackage some of Asukal's original CAB files to avoid requiring post-installation patches and to reduce the number of separate cab files (which would also reduce memory space required).

....if Asukal is OK with this...

hi, of curse i say OK you to repack as your want
(but i dont know SB&MS Axis power will say OK

)

i think only one cab "Welcom_Darkside_R6.zip" was included
all patches, but cabs for securities,

and you can extract canbs with CAB manager (trial version is enough)

http://www.ocpsoftware.com

Good luck!

tora201 · May 27, 2007

does this work with WM6? It would be great to have an English interface for the Japanese Rom I installed. It would just be much easier than following the guide to installing Jap. keyboard, language, mail, softbank settings, etc etc for the English version of WM6.

achilles21 · May 30, 2007

Asukal,

I tried Lets Japan with english WM6,
succesfully installed and working.
There is only one issue that I found after
installing Lets Japan on WM6, I can't sync my
Windows Live account via wifi anymore.
But after I remove Lets Japan,
my Windows Live can then sync again via
wifi.

The error stated that I don't have
access plan from my provider.
Wherein I think windows live can use
both data and wifi connection, or whichever
is available.

Is it because of the localization or are there
any reg mod needed to make it work and
have my windows live sync via wifi ?

Does anyone in here also encountered this issue.

Thanks

shunsai · Jun 5, 2007

well, i never did relay back my experience with the english MUI setup, but i was able to successfully install it. actually, at first, darkside6 didn't work for me immediately after installing the cab. rather, what i had to do (as one post in the previous thread tipped me off) was to find the extracted individual cabs in the temporary files folder and install them separately. after that and a soft reset, things seemed to be installed fine. most menus were changed to english (with the exception of the menus in the Softbank mail program and some drop-down menus, and shortcuts in settings).

one thing i wasn't sure about though- well, actually two. first, for the clock. i changed it so it shows a 12 hour clock instead of a 24 hour clock... but there is no AM or PM following the time? is that how it displays on native english roms? second, i've heard some people say that to get rid of the english menus and revert back to japanese, you have to do a hard reset. does this mean that it's safe to uninstall the programs listed in the installed programs list related to the MUI? i'm not a fan of hardresetting, and would like to avoid screwing up my quite functional setup if it's not necessary. but if its just taking up unnecessary space...

Asukal · Jun 7, 2007

tora201 said:
does this work with WM6? It would be great to have an English interface for the Japanese Rom I installed. It would just be much easier than following the guide to installing Jap. keyboard, language, mail, softbank settings, etc etc for the English version of WM6.

i tried this in WM6 (Hermes) and worked.
try to install enable_rapi.can before this,
and will work(some MUI doesnt in this for WM6, still keep english them)

Asukaly yours!

Asukal · Jun 7, 2007

achilles21 said:
Asukal,

I tried Lets Japan with english WM6,
succesfully installed and working.
There is only one issue that I found after
installing Lets Japan on WM6, I can't sync my
Windows Live account via wifi anymore.
But after I remove Lets Japan,
my Windows Live can then sync again via
wifi.

The error stated that I don't have
access plan from my provider.
Wherein I think windows live can use
both data and wifi connection, or whichever
is available.

Is it because of the localization or are there
any reg mod needed to make it work and
have my windows live sync via wifi ?

Does anyone in here also encountered this issue.

Thanks

possiblity, 1st deleat Paring device when yors were English Lacation,
and try to sync after Japanese Location(not sure)

also i hard similar bug, and he could fix that with registry tweak.
(no exactly information what registry was tweaked)

sesaru · Aug 4, 2007

Hello Asukal! I come to you again for help!

There are two things that I still have problems with while making English ROM Japanese friendly:

1º)I have Japanese I/O enabled, with "Roma/Kana" SIP by default (via SIP change of Sheult). But when I open a program, always "hiragana" write is default one, and I need to change to "romanji" (normal English input); but no I idea how to do it (><)
That isn't put "Keyboard" SIP for english input; it's Japanese input, but romanji by default. I hope I explain myself.

2º)[less important] Is there any way to make Pocket IE to work with Yahoo! Keitai (brose the Web pages of Yahoo! Keitai)

Thanks!

PD: After read this thread, I have two small questions (really less important; just curious):
a)LetsJapanNo6.zip: New CAB for make Softbank Hermes from JP to English without flash I suppose, no?
a1)Want does exactly do the Treo version?
b)You translate Softbank mail app to English, but only works in original ROMs because of certificates?

And the last one ... Any advance in MMS after MMS Lite? Last times I only checked WM6 Forum, and I think I lose many news form this forum.

Really thanks for all!!

mexec · Aug 4, 2007

Asukal said:
hi, thanks guys,
and i have merged Lets Japan and IME long time ago for Test

i will find the file where i stored,, so many files in my HDD,
and can not remenber that.(not organized my PC

hi asukal..

did u find the file yet?..

sorry if u have posted it anywhere else..

Sniuk · Aug 5, 2007

achilles21 said:
Asukal,

I tried Lets Japan with english WM6,
succesfully installed and working.
There is only one issue that I found after
installing Lets Japan on WM6, I can't sync my
Windows Live account via wifi anymore.
But after I remove Lets Japan,
my Windows Live can then sync again via
wifi.

The error stated that I don't have
access plan from my provider.
Wherein I think windows live can use
both data and wifi connection, or whichever
is available.

Is it because of the localization or are there
any reg mod needed to make it work and
have my windows live sync via wifi ?

Does anyone in here also encountered this issue.

Thanks

:O I had installed Letsjapan 5 and happens the same, and I couldn't connect to msn, with the same error you said.
so I tried, unistall it, and works. Then I just installed Letsjapan6 , and still can connect to windows live MSN

I didn't realize that could be the problem

Thanks.
And thanks Asukal for LetsJapan x

sesaru · Aug 6, 2007

sesaru said:
I have Japanese I/O enabled, with "Roma/Kana" SIP by default (via SIP change of Sheult). But when I open a program, always "hiragana" write is default one, and I need to change to "romanji" (normal English input); but no I idea how to do it (><)
That isn't put "Keyboard" SIP for english input; it's Japanese input, but romanji by default. I hope I explain myself.

No idea about this?

Asukal · Aug 8, 2007

sesaru said:
No idea about this?

sorry late reply coze of returned to Japan for a while.

1:http://tillanosoft.com/ce/ptweak.html
and DL Pocket Tweak.

2:Go to Settings-System, and you can find PocketTweak Icon..
(make soft reset if you couldnt find it)

3:Open it and go to the [SIP] tab,
and tick the [Keyboard] & tap the [Make as Default input] or some like that.

4:then you can get English Keyboard as default.
But not English predict was available, coze Japanese Key was enabled.

I suggest do not tick to appear so many keyboard with this.
So many Keyboard will make troubles against OS.
As minimum as you can,
-----------------------------------------------------------------
@Lets Japan No6 is for japanese Localize on English device, not for Japanese OS.

--------------------------------------------------------------------

Asuklay yours!

Asukal · Aug 8, 2007

mexec said:
hi asukal..

did u find the file yet?..
sorry if u have posted it anywhere else..

sorry, i found this, and tested on my device.
not worked,

have to remake this,
PLS wait, but i am so busy this season, can not say when...

sesaru · Aug 10, 2007

Asukal said:
sorry late reply coze of returned to Japan for a while.

1:http://tillanosoft.com/ce/ptweak.html
and DL Pocket Tweak.

2:Go to Settings-System, and you can find PocketTweak Icon..
(make soft reset if you couldnt find it)

3:Open it and go to the [SIP] tab,
and tick the [Keyboard] & tap the [Make as Default input] or some like that.

4:then you can get English Keyboard as default.
But not English predict was available, coze Japanese Key was enabled.

I suggest do not tick to appear so many keyboard with this.
So many Keyboard will make troubles against OS.
As minimum as you can,
-----------------------------------------------------------------
@Lets Japan No6 is for japanese Localize on English device, not for Japanese OS.

--------------------------------------------------------------------

Asuklay yours!

Hello!

Two things:
-About IME, I know what you told me. What I asked you is different. It's have the Roma/Kana option by default (or any that let you know Japanese, instead of "Keyboard"). But you know it have 5 options (Hiragana, 2 Katakana and 2 Romanjis). By default is always Hiragana. I want to change to Romanji.

-About "@Lets Japan No6 ", thah makes your device a Japanese one (fonts+japanese imput), of a softbank one?

Bye!
Sesaru

Asukal · Aug 10, 2007

sesaru said:
Hello!

Two things:
-About IME, I know what you told me. What I asked you is different. It's have the Roma/Kana option by default (or any that let you know Japanese, instead of "Keyboard"). But you know it have 5 options (Hiragana, 2 Katakana and 2 Romanjis). By default is always Hiragana. I want to change to Romanji.

-About "@Lets Japan No6 ", thah makes your device a Japanese one (fonts+japanese imput), of a softbank one?

Bye!
Sesaru

@you meant toggle input chalactors?
Like [あ-ぁ-ア-ァ- Ａ-A] ?

if so, see this---

HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME
Option3
change to C instead 1

or, use the utlity XO1HTTweak.exe from here
http://www.nkozawa.com/html/WinMobileX01HTweak.html

just change the Value
半角英数　instead of 全角かな

＠Lets Japan is just encoding and font for English device.
not included Input system.

@Inputsyetem is here
http://hn801.hkes.com/Data/blog/WM5_IME.htm

@Other localize set is
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
or
http://www.asukal.jp/English/LocalizeCABS.htm

Asukal · Aug 10, 2007

sesaru said:
Hello!

Two things:
-About IME, I know what you told me. What I asked you is different. It's have the Roma/Kana option by default (or any that let you know Japanese, instead of "Keyboard"). But you know it have 5 options (Hiragana, 2 Katakana and 2 Romanjis). By default is always Hiragana. I want to change to Romanji.

-About "@Lets Japan No6 ", thah makes your device a Japanese one (fonts+japanese imput), of a softbank one?

Bye!
Sesaru

@you meant toggle input chalactors?
Like [あ-ぁ-ア-ァ- Ａ-A] ?

if so, see this---

HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME
Option3
change to C instead 1

or, use the utlity XO1HTTweak.exe from here
http://www.nkozawa.com/html/WinMobileX01HTweak.html

just change the Value
半角英数　instead of 全角かな

＠Lets Japan is just encoding and font for English device.
not included Input system.

@Inputsyetem is here
http://hn801.hkes.com/Data/blog/WM5_IME.htm

@Other localize set is
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
or
http://www.asukal.jp/English/LocalizeCABS.htm

sesaru · Aug 10, 2007

Asukal said:
@you meant toggle input chalactors?
Like [あ-ぁ-ア-ァ- Ａ-A] ?

if so, see this---

HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME
Option3
change to C instead 1

or, use the utlity XO1HTTweak.exe from here
http://www.nkozawa.com/html/WinMobileX01HTweak.html

just change the Value
半角英数　instead of 全角かな

＠Lets Japan is just encoding and font for English device.
not included Input system.

@Inputsyetem is here
http://hn801.hkes.com/Data/blog/WM5_IME.htm

@Other localize set is
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
or
http://www.asukal.jp/English/LocalizeCABS.htm

Asukal, I really love you!! I was asking for this many many times, and nobody know it!! (^-^)

There is more thing to make my WM6 perfect, and also one question that maybe you can help me

-I tries many times to make Pockect IE to work with Yahoo! Keitai of softbank but not way. Maybe you know how to do it.

-For MMS, I have MMSLite. I hace flat rate of softbank (1man yen). I'm not sure if MMS Lite use standar Softbank connect, or use any that mabe will charge more money to me (more than that 10.000 yen guari)

Thanks a lot!!!!!!!!!!
Sesaru

Asukal's MUI (Multilingual User Interface) for the HTC Hermes

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads