{All 2011}[DISCONTINUED][FAQ][Q&A][CM10.2] LegacyXperia discussion

mikeioannina · Jan 7, 2014

Wiki

Hello guys,

Today I'm introducing the LegacyXperia Wiki
Thanks to @cajhin for his idea and work on the wiki, we now have all the info a user will need in one place.

I'd like you to browse the wiki and see if there is something missing.
For now I have left the wiki open and editable by everyone, so you can add any missing things.

Since in the past few months there are a lot of offtopic posts from new & inexperienced users,
we have created guides for new members who have not flashed CM in the past and don't know what exactly they need to do.

MFaust · Jan 7, 2014

bloodysak said:
I am using the latest end of life version of cm 10.2 on my neo v and I am having Bluetooth connection problem.
It's not able to find my Bluetooth headset on the settings so I not able to pair with my Bluetooth headset plz help.
Thank you

Just tested this...i connectet a bluetooth headset(a noname one from ebay) to my mini pro (i am using the build 20131215-cm10.2) and it works without any problem..
btw...tryed only to play muzic.. not to make calls

---------- Post added at 01:36 AM ---------- Previous post was at 01:12 AM ----------

xp7 said:
no.i use this rom with sd 16 G class 10 and speed of transfer is 4 or 5 mb/s

strange... i have a 32 gb class 10... the first 10 seconds i have greather speed but it get stabilized at 1 MB/s (not 1Mb/s witch is different!) but this is not a problem it is oky by me at least it work!
but it is strange why you have such a big speed...(with a card reader my card got up to 15MB/s writing speed)

xp7 · Jan 9, 2014

MFaust said:
strange... i have a 32 gb class 10... the first 10 seconds i have greather speed but it get stabilized at 1 MB/s (not 1Mb/s witch is different!) but this is not a problem it is oky by me at least it work!
but it is strange why you have such a big speed...(with a card reader my card got up to 15MB/s writing speed)

when i do copy to pc by my phone speed of transfer is 20mb/s then when i do copy pc to my phone speed of transfer is 2 or 3.5 mb/s.i have win 8 and my sd card is SANDISK 16g class 10

mikeioannina · Jan 11, 2014

New build coming

## Release candidate 2 build 20140111 - cm-10.2
* Latest cm10.2 changes
* Updated kernel to 3.4.76
* Build zRAM again
* Disabled in-call noise suppression
* Fixed camera timelapse mode
* Enabled Recovery Performance Profiles
* Enabled Qualcomm bionic optimizations
* Enabled SD partitioning in CWM recovery
* Don't overclock on default performance profile
* Fixed cyrillic hardware keyboard layout on mango/iyokan
* Kernel changes:
- Updated msm_serial_hs driver (affects bluetooth)
- Updated mmc code to CAF jb_2.5 branch (affects SD performance)
- Updated zRAM for better performance
- Enabled cleancache
- Enabled zcache
- Updated lowmemorykiller
- Added exFAT filesystem support
- Added NTFS rw support
- Added profiling (oprofile) support
- Updated ondemand bootspulse frequency
- Boot with 1GHz instead of 1.2GHz by default

Builds will roll alphabetically for all devices until tomorrow.

RaphaelHam · Jan 12, 2014

mikeioannina said:
## Release candidate 2 build 20140111 - cm-10.2
* Latest cm10.2 changes
* Updated kernel to 3.4.76
* Build zRAM again
* Disabled in-call noise suppression
* Fixed camera timelapse mode
* Enabled Recovery Performance Profiles
* Enabled Qualcomm bionic optimizations
* Enabled SD partitioning in CWM recovery
* Don't overclock on default performance profile
* Fixed cyrillic hardware keyboard layout on mango/iyokan
* Kernel changes:
- Updated msm_serial_hs driver (affects bluetooth)
- Updated mmc code to CAF jb_2.5 branch (affects SD performance)
- Updated zRAM for better performance
- Enabled cleancache
- Enabled zcache
- Updated lowmemorykiller
- Added exFAT filesystem support
- Added NTFS rw support
- Added profiling (oprofile) support
- Updated ondemand bootspulse frequency
- Boot with 1GHz instead of 1.2GHz by default

Builds will roll alphabetically for all devices until tomorrow.

So will u still using cm 10.2 as ur daily ??

Andr3iu · Jan 12, 2014

Battery patch

Hello, i'm using 20131215 is verry good and i like it, but i need someting a battery patch or app that config my phone not to drain battery when is on idle. Thx in advance.

zerorated24 · Jan 12, 2014

mikeioannina said:
## Release candidate 2 build 20140111 - cm-10.2
* Latest cm10.2 changes
* Updated kernel to 3.4.76
* Build zRAM again
* Disabled in-call noise suppression
* Fixed camera timelapse mode
* Enabled Recovery Performance Profiles
* Enabled Qualcomm bionic optimizations
* Enabled SD partitioning in CWM recovery
* Don't overclock on default performance profile
* Fixed cyrillic hardware keyboard layout on mango/iyokan
* Kernel changes:
- Updated msm_serial_hs driver (affects bluetooth)
- Updated mmc code to CAF jb_2.5 branch (affects SD performance)
- Updated zRAM for better performance
- Enabled cleancache
- Enabled zcache
- Updated lowmemorykiller
- Added exFAT filesystem support
- Added NTFS rw support
- Added profiling (oprofile) support
- Updated ondemand bootspulse frequency
- Boot with 1GHz instead of 1.2GHz by default

Builds will roll alphabetically for all devices until tomorrow.

cm10.2 is much more stable compared to cm11. thanks for this update.

bane597@gmail.com · Jan 12, 2014

It's good

It's good but CM11 is much better

larlin · Jan 12, 2014

mikeioannina said:
## Release candidate 2 build 20140111 - cm-10.2
* Latest cm10.2 changes
* Updated kernel to 3.4.76
* Build zRAM again
* Disabled in-call noise suppression
* Fixed camera timelapse mode
* Enabled Recovery Performance Profiles
* Enabled Qualcomm bionic optimizations
* Enabled SD partitioning in CWM recovery
* Don't overclock on default performance profile
* Fixed cyrillic hardware keyboard layout on mango/iyokan
* Kernel changes:
- Updated msm_serial_hs driver (affects bluetooth)
- Updated mmc code to CAF jb_2.5 branch (affects SD performance)
- Updated zRAM for better performance
- Enabled cleancache
- Enabled zcache
- Updated lowmemorykiller
- Added exFAT filesystem support
- Added NTFS rw support
- Added profiling (oprofile) support
- Updated ondemand bootspulse frequency
- Boot with 1GHz instead of 1.2GHz by default

Builds will roll alphabetically for all devices until tomorrow.

But where is it? Cant find the latest release :crying::crying:

Thank you for all your work :good:

skaveelicious · Jan 12, 2014

Andr3iu said:
Hello, i'm using 20131215 is verry good and i like it, but i need someting a battery patch or app that config my phone not to drain battery when is on idle. Thx in advance.

I'm staying on 20131215 for now as it is rock stable

I do get easily to 24h of usage under normal conditions. That is a total of about 3:00h of screen on 2-3:00h of music playback and Wifi always on when I'm home and Mobile Data always on when I'm outside.

Some screenshots with my settings, maybe they do help. Note that so far I'm over 24h usage, that's why Mobile standby is top battery drainer. I/O scheduler is noop.

~ska

Mardon · Jan 12, 2014

larlin said:
But where is it? Cant find the latest release :crying::crying:

Thank you for all your work :good:

It just finished compiling, downloading now

RaphaelHam · Jan 13, 2014

Hi guys, especially coconut user, what do u think about this 86 baseband?
link: http://xdaforums.com/showthread.php?t=2565317
mr mike.
do you reccomend this??

gutzzz · Jan 13, 2014

No update yet for urushi device? I've checked that other devices already have the new version but not on urushi

toyzitox · Jan 13, 2014

gutzzz said:
No update yet for urushi device? I've checked that other devices already have the new version but not on urushi

It is compiled alphabetically, be patient.

wawan20 · Jan 13, 2014

RaphaelHam said:
Hi guys, especially coconut user, what do u think about this 86 baseband?
link: http://xdaforums.com/showthread.php?t=2565317
mr mike.
do you reccomend this??

i think u can use it ... cause i haven't problem using that ..

zerorated24 · Jan 13, 2014

Has anyone managed to make Viper4android work? I can't seem to make it work in this ROM. If anyone has managed to make it work.

Sent from my Xperia Mini using Tapatalk 2

Sent from my Xperia Mini using Tapatalk 2

Telemuddi · Jan 13, 2014

For me Viper Audio works on LX:good:

It's a bit tricky to get it work.
-copy the apk to /system/app, delete dsp manager and open the app.
-download the filter and reboot the phone
-open apollo play a song and open the equalizer and connected headphones
-enable V4A ans play with the settings. if the sound does not change open menu ans lock effect mode to headphones and play again with the settings.

it's working find on my mango.

ntmohammad · Jan 13, 2014

skaveelicious said:
Fix for CWM SD - Card mount problem ( PC not mounting SD - Card in CWM )

It all seems to be a PC side issue and it looks like Windows is finding and installing the wrong driver for Mass Storage in CWM via Windows update. Instead of installing a "Mass Storage Device Driver" it is installing a "Sony s0102 driver". What has to be done is go into the Device Manager and change the driver into a USB Mass Storage Device (Driver) manually. I don't know the exact root of the problem because I was able to mount the SD-Card on some Win 7 pro PCs without any modifications and on some not.

How this is done is best explained with the screenshot in the attachment.

My full post can be found here: https://github.com/LegacyXperia/local_manifests/issues/33#issuecomment-31621141
I hope this resolves the issue some of us were having using both the LX-nAa-Kernel for CM10.1 and CM10.2.

Let me know if this worked for you aswell

gl,
~ska

it worked

thx so much !

wawan20 · Jan 14, 2014

Telemuddi said:
For me Viper Audio works on LX:good:

It's a bit tricky to get it work.
-copy the apk to /system/app, delete dsp manager and open the app.
-download the filter and reboot the phone
-open apollo play a song and open the equalizer and connected headphones
-enable V4A ans play with the settings. if the sound does not change open menu ans lock effect mode to headphones and play again with the settings.

it's working find on my mango.

what is the viper4android version are u used ??

Telemuddi · Jan 14, 2014

Fx 2.3.1.5

Gesendet von meinem Xperia Mini Pro mit Tapatalk

{All 2011}[DISCONTINUED][FAQ][Q&A][CM10.2] LegacyXperia discussion

Recognized Developer

Senior Member

Senior Member

Recognized Developer

Senior Member

Member

Senior Member

Senior Member

New member

Senior Member

Attachments

Inactive Recognized Contributor

Senior Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Top Liked Posts