[HOW-TO] Download and Flash X, X+ and XL Stock ROM with NX Flasher [NOOB FRIENDLY]

Search This thread

AngSanley

Senior Member
Apr 21, 2012
981
1,256
Medan, Indonesia
Step 1: Downloading

We download the stock ROM either by using Navifirm+ or NCS. Here in this tutorial we use Navifirm+

1. Download Navifirm+ 3.2 here
2. After download done, extract the file and double click NaviFirmPlus.exe
3. When a pop up comes, click Cancel
10614397_831349790223052_379779542751848244_n.jpg


4. Then open up your phone's back case and write down the CODE into the field, or use example CODE then press ENTER (see picture above)
5. Mark the files you want to download. To make your phone bootable you only need system, boot and recovery. You don't need to download all files
6. After it, click Download
7. You should able to find your ROM at "Navifirm+\Fw" folder.

Step 2. Flashing

UPDATE: video tutorial by @nikozzzzzz

1. Power off your phone
2. Hold down volume down and power button at the phone for about 15 seconds
3. Connect the phone to PC with Micro-USB cable
4. Install the driver on PC if you haven't done it, you can read it here
5. Download and open Nokia X Flasher
new1010.png


6. Click on system button and locate the "RM-xxx_x.x.x.x_system.img" file you just downloaded via Navifirm+
7. Click on boot button and locate the "RM-xxx_x.x.x.x_boot.img" file you just downloaded via Navifirm+
8. Click on recovery button and locate the "RM-xxx_x.x.x.x_recovery.img" file you just downloaded via Navifirm+
9. Do the same with preload, variant, and others if you downloaded it too
10. After you sure you put the right file, click on Start Flashing button and wait for about 15 minutes, after it, Click on Reboot button

CODEs for Nokia X RM-980/RM-981
059V301: RM-980 GLOBAL SWAP
059T991: RM-980 NDT APAC ID ERA
059T992: RM-980 NDT APAC ID PAR
059T993: RM-980 NDT APAC ID TRI
059T9F0: RM-980 NDT APAC MY
059T983: RM-980 NDT APAC TH
059T982: RM-980 NDT APAC VN
059T9D8: RM-980 NDT EURO PL
059T989: RM-980 NDT EURO TR
059T9G1: RM-980 NDT EURO UA
059T9G0: RM-980 NDT IMEA AE
059T9F2: RM-980 NDT IMEA EG
059T985: RM-980 NDT IMEA IN
059T9F4: RM-980 NDT IMEA KE
059T9F9: RM-980 NDT IMEA KW
059T9F5: RM-980 NDT IMEA NG
059T9F7: RM-980 NDT IMEA OM
059T986: RM-980 NDT IMEA PK
059T9F8: RM-980 NDT IMEA QA
059T9F6: RM-980 NDT IMEA SA

CODEs for Nokia X+ RM-1053
059V838 NDT APAC VN
059V856 NDT IMEA SA
059V858 NDT IMEA QA
059V841 NDT IMEA IN
059V860 NDT IMEA AE
059V8T0 PWBASSY LIGHT SWAP ENGINE GLOBAL
059V8T2 GLOBAL SWAP

CODEs for Nokia XL RM-1030
059V6G3 NDT APAC VN
059V6S5 NDT IMEA AE
059V6P8 NDT APAC ID PAR
059V6P1 NDT APAC TH
059V6S4 NDT IMEA KW
059V6R1 NDT IMEA NG
059V6R0 NDT IMEA KE
059V6P7 NDT APAC ID ERA
059V6Q1 NDT EURO TR
059V6Q9 NDT IMEA EG
059V6S3 NDT IMEA QA
059V6S0 NDT IMEA SA
059V6S2 NDT IMEA OM
059V6P9 NDT APAC ID TRI
059V6P6 NDT APAC MY
059V6P5 NDT APAC KH
059V6Q0 NDT EURO RU
059V6Q7 NDT IMEA PK
059V6Q4 NDT EURO KZ
059V6Q2 NDT EURO PL
059V6Q3 NDT EURO UA
059V8V2 PWBASSY LIGHT SWAP ENGINE GLOBAL
059V935 NDT IMEA BD
059V8V0 GLOBAL SWAP
 
Last edited:

zuned

Member
Apr 21, 2014
7
2
hi folks!

For anyone who wants to get back to the original nokia stock rom but datapackagemanager can't download the files for you or just too hard for you don't worry. Just follow this guide :d

1. Download the stock rom imgs, to install stock rom you just need to download:
- system.img
- boot.img
- recovery.img

just download these files and that would be enough to boot stock rom :d if you want stock preinstalled apps too, download preload.img.

2. Prepare the files, put the files in one folder that easy to access.

3. Download nokia x flasher tool

4. Put your phone off, then hold down the volume down button and power button together. After the phone vibrates release the power button, but still hold vol. Down for about 15 seconds. Connect the cable and the pc will recognizes the phone.

5. Download nokia x adb driver and install it

6. Open nokia x flasher tool, make sure your phone is detected, it will looks like this:
flasher.png


7. Click the system button and locate the system.img you just downloaded

8. Click start flashing to start the process (yes just system.img first)

9. After flashing system done appears in log, click reset all fields

flash%20system.png


10. Then click on boot, and locate for boot.img

11. Click on recovery and locate recovery.img

12. Then click start flashing again, and wait until "done" appears

13. If you want to flash preload, do the same as above, just reset the fields first.

14. After all imgs are done, click on reboot. Your phone will reboot to the system and enjoy your new stock rom :d

note: If you want to factory reset, do it either in recovery or via settings.
tnx bro for nyc details about nokia x flashing
 

Ercalibur

New member
Jul 4, 2014
4
1
Hi folks!

For anyone who wants to get back to the original Nokia stock ROM but DataPackageManager can't download the files for you or just too hard for you don't worry. Just follow this guide :D

1. Download the stock ROM imgs, to install stock ROM you just need to download:
- system.img
- boot.img
- recovery.img

Just download these files and that would be enough to boot stock ROM :D If you want stock preinstalled apps too, download preload.img.

2. Prepare the files, put the files in one folder that easy to access.

3. Download Nokia X Flasher Tool

4. Put your phone off, then hold down the volume down button and power button together. After the phone vibrates release the power button, BUT STILL HOLD VOL. DOWN for about 15 seconds. Connect the cable and the PC will recognizes the phone.

5. Download Nokia X ADB Driver and install it

6. Open Nokia X Flasher Tool, make sure your phone is detected, it will looks like this:
flasher.png


7. Click the system button and locate the system.img you just downloaded

8. Click Start Flashing to start the process (yes just system.img first)

9. After Flashing system done appears in Log, click Reset All Fields

flash%20system.png


10. Then click on boot, and locate for boot.img

11. Click on recovery and locate recovery.img

12. Then click Start Flashing again, and wait until "done" appears

13. If you want to flash preload, do the same as above, just reset the fields first.

14. After all imgs are done, click on Reboot. Your phone will reboot to the system and enjoy your new stock ROM :D

Note: If you want to factory reset, do it either in recovery or via settings.


is this flash tool for bootloop error or something,, sorry i'm so newbie,,
 
  • Like
Reactions: sathvik07

keyvanbehzadi7

New member
Jul 10, 2014
1
0
thanks dear AngSanley

dear AngSanley thanks for your post realy thanks

i registered to XDA to day for that say thanks man thanks

your post very usefull
 

lgsmurli06

Member
Jul 29, 2014
5
0
Nokia Flasher

Hi folks!

For anyone who wants to get back to the original Nokia stock ROM but DataPackageManager can't download the files for you or just too hard for you don't worry. Just follow this guide :D

UPDATE: video tutorial by @nikozzzzzz


1. Download the stock ROM imgs, to install stock ROM you just need to download:
- system.img
- boot.img
- recovery.img

Just download these files and that would be enough to boot stock ROM :D If you want stock preinstalled apps too, download preload.img.

2. Prepare the files, put the files in one folder that easy to access.

3. Download Nokia X Flasher Tool

4. Put your phone off, then hold down the volume down button and power button together. After the phone vibrates release the power button, BUT STILL HOLD VOL. DOWN for about 15 seconds. Connect the cable and the PC will recognizes the phone.

5. Download Nokia X ADB Driver and install it

6. Open Nokia X Flasher Tool, make sure your phone is detected, it will looks like this:
flasher.png


7. Click the system button and locate the system.img you just downloaded

8. Click Start Flashing to start the process (yes just system.img first)

9. After Flashing system done appears in Log, click Reset All Fields

flash%20system.png


10. Then click on boot, and locate for boot.img

11. Click on recovery and locate recovery.img

12. Then click Start Flashing again, and wait until "done" appears

13. If you want to flash preload, do the same as above, just reset the fields first.

14. After all imgs are done, click on Reboot. Your phone will reboot to the system and enjoy your new stock ROM :D

Note: If you want to factory reset, do it either in recovery or via settings.

I m using noka xl , I have the fone rooted , my software platform shows 1.1.1.0 and i want to update to new version which is 1.2.3.1 , so what should i do Once Flashing is done , 1. can i run the new software update or do i need to follow any other steps. i am not a developer so can you please clearly explain the step by step process of updating the new software update provided by nokia (1.2.3.1)
 

Dom3616

Senior Member
May 7, 2013
909
574
Karachi
I m using noka xl , I have the fone rooted , my software platform shows 1.1.1.0 and i want to update to new version which is 1.2.3.1 , so what should i do Once Flashing is done , 1. can i run the new software update or do i need to follow any other steps. i am not a developer so can you please clearly explain the step by step process of updating the new software update provided by nokia (1.2.3.1)

First of all, this tutorial is for Nokia X.
Secondly, you should download NCS (Nokia Care Suite) and flash the latest version through that. That is the bestest way. This method is for devs and experience people. ;)
 
  • Like
Reactions: shojeep

prasetyo12p1

Member
Mar 25, 2012
8
0
hi. I'm trying to install the ADB Driver on my Windows 8.1 64bit laptop, and it says it needs the 64-bit version of DPInst.exe. is there any other version of ADB driver that I can try? thankyou.
 

Attachments

  • dpinst.PNG
    dpinst.PNG
    7.3 KB · Views: 152

.Lucius

Member
Aug 1, 2014
5
0
Thanks for the guide and the tool, but notice that 4.5 can't be installed on XP because 4.5 doesn't support it so please compile your project using 4.0 as the X Manager which working great on XP.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 27
    Step 1: Downloading

    We download the stock ROM either by using Navifirm+ or NCS. Here in this tutorial we use Navifirm+

    1. Download Navifirm+ 3.2 here
    2. After download done, extract the file and double click NaviFirmPlus.exe
    3. When a pop up comes, click Cancel
    10614397_831349790223052_379779542751848244_n.jpg


    4. Then open up your phone's back case and write down the CODE into the field, or use example CODE then press ENTER (see picture above)
    5. Mark the files you want to download. To make your phone bootable you only need system, boot and recovery. You don't need to download all files
    6. After it, click Download
    7. You should able to find your ROM at "Navifirm+\Fw" folder.

    Step 2. Flashing

    UPDATE: video tutorial by @nikozzzzzz

    1. Power off your phone
    2. Hold down volume down and power button at the phone for about 15 seconds
    3. Connect the phone to PC with Micro-USB cable
    4. Install the driver on PC if you haven't done it, you can read it here
    5. Download and open Nokia X Flasher
    new1010.png


    6. Click on system button and locate the "RM-xxx_x.x.x.x_system.img" file you just downloaded via Navifirm+
    7. Click on boot button and locate the "RM-xxx_x.x.x.x_boot.img" file you just downloaded via Navifirm+
    8. Click on recovery button and locate the "RM-xxx_x.x.x.x_recovery.img" file you just downloaded via Navifirm+
    9. Do the same with preload, variant, and others if you downloaded it too
    10. After you sure you put the right file, click on Start Flashing button and wait for about 15 minutes, after it, Click on Reboot button

    CODEs for Nokia X RM-980/RM-981
    059V301: RM-980 GLOBAL SWAP
    059T991: RM-980 NDT APAC ID ERA
    059T992: RM-980 NDT APAC ID PAR
    059T993: RM-980 NDT APAC ID TRI
    059T9F0: RM-980 NDT APAC MY
    059T983: RM-980 NDT APAC TH
    059T982: RM-980 NDT APAC VN
    059T9D8: RM-980 NDT EURO PL
    059T989: RM-980 NDT EURO TR
    059T9G1: RM-980 NDT EURO UA
    059T9G0: RM-980 NDT IMEA AE
    059T9F2: RM-980 NDT IMEA EG
    059T985: RM-980 NDT IMEA IN
    059T9F4: RM-980 NDT IMEA KE
    059T9F9: RM-980 NDT IMEA KW
    059T9F5: RM-980 NDT IMEA NG
    059T9F7: RM-980 NDT IMEA OM
    059T986: RM-980 NDT IMEA PK
    059T9F8: RM-980 NDT IMEA QA
    059T9F6: RM-980 NDT IMEA SA

    CODEs for Nokia X+ RM-1053
    059V838 NDT APAC VN
    059V856 NDT IMEA SA
    059V858 NDT IMEA QA
    059V841 NDT IMEA IN
    059V860 NDT IMEA AE
    059V8T0 PWBASSY LIGHT SWAP ENGINE GLOBAL
    059V8T2 GLOBAL SWAP

    CODEs for Nokia XL RM-1030
    059V6G3 NDT APAC VN
    059V6S5 NDT IMEA AE
    059V6P8 NDT APAC ID PAR
    059V6P1 NDT APAC TH
    059V6S4 NDT IMEA KW
    059V6R1 NDT IMEA NG
    059V6R0 NDT IMEA KE
    059V6P7 NDT APAC ID ERA
    059V6Q1 NDT EURO TR
    059V6Q9 NDT IMEA EG
    059V6S3 NDT IMEA QA
    059V6S0 NDT IMEA SA
    059V6S2 NDT IMEA OM
    059V6P9 NDT APAC ID TRI
    059V6P6 NDT APAC MY
    059V6P5 NDT APAC KH
    059V6Q0 NDT EURO RU
    059V6Q7 NDT IMEA PK
    059V6Q4 NDT EURO KZ
    059V6Q2 NDT EURO PL
    059V6Q3 NDT EURO UA
    059V8V2 PWBASSY LIGHT SWAP ENGINE GLOBAL
    059V935 NDT IMEA BD
    059V8V0 GLOBAL SWAP
    3
    I have
    windows xp


    When you run the program
    Get this message

    valid win32 application

    What is wrong
    huh? can anyone confirm this? I'm on windows 8.1 ..

    btw windows xp is outdated tho

    do you have .NET 4.5 installed?
    2
    I have
    windows xp


    When you run the program
    Get this message

    valid win32 application

    What is wrong
    2
    hi folks!

    For anyone who wants to get back to the original nokia stock rom but datapackagemanager can't download the files for you or just too hard for you don't worry. Just follow this guide :d

    1. Download the stock rom imgs, to install stock rom you just need to download:
    - system.img
    - boot.img
    - recovery.img

    just download these files and that would be enough to boot stock rom :d if you want stock preinstalled apps too, download preload.img.

    2. Prepare the files, put the files in one folder that easy to access.

    3. Download nokia x flasher tool

    4. Put your phone off, then hold down the volume down button and power button together. After the phone vibrates release the power button, but still hold vol. Down for about 15 seconds. Connect the cable and the pc will recognizes the phone.

    5. Download nokia x adb driver and install it

    6. Open nokia x flasher tool, make sure your phone is detected, it will looks like this:
    flasher.png


    7. Click the system button and locate the system.img you just downloaded

    8. Click start flashing to start the process (yes just system.img first)

    9. After flashing system done appears in log, click reset all fields

    flash%20system.png


    10. Then click on boot, and locate for boot.img

    11. Click on recovery and locate recovery.img

    12. Then click start flashing again, and wait until "done" appears

    13. If you want to flash preload, do the same as above, just reset the fields first.

    14. After all imgs are done, click on reboot. Your phone will reboot to the system and enjoy your new stock rom :d

    note: If you want to factory reset, do it either in recovery or via settings.
    tnx bro for nyc details about nokia x flashing
    2
    tutorial updated, easier method. X+ and XL support