same problem
Is there no solution for this? I have tried everything that I could find on the internet and nothing seems to work. I consistantly get the FAILED <remote: signature verify fail>
And this is what I get when I tried the fastboot oem boot. Getting really frustrated. At the end of my string. Does anyone have any ideas?
... INFOBoot/Recovery signature che
INFOBoot/Recovery signature checking...
INFOsetup_tag addr=0x80400100 cmdline add=0xC02F4554
INFOTAG:Ramdisk OK
INFOTAG:skuid 0x2ED01
INFOTAG:hero panel = 0x2940043
INFOTAG:engineerid = 0x0
INFOTAG: PS ID = 0x0
INFOTAG: Gyro ID = 0x0
INFODevice CID is not super CID
INFOCID is ROGER001
INFOsetting->cid::ROGER001
INFOserial number: HT265W405171
INFOcommandline from head: console=ttyHSL0,115200,n8
INFOcommand line length =718
INFOactive commandline: poweron_status=1 reset_status=0 board_vi
INFOlle.disable_uart3=0 diag.enabled=0 board_ville.debug_uart=0
INFOuserdata_sel=0 androidboot.emmc=true androidboot.pagesize=20
INFO48 skuid=0 ddt=20 ats=0 androidboot.lb=1 td.td=1 td.sf=1 td
INF
fs=328 td.prd=1 td.dly=0 td.tmo=300 imc_online_log=0 andr
INFOoidboot.efuse_info=NFSL androidboot.baseband=0.17.31501S.10_
INFO2 androidboot.cid=ROGER001 androidboot.devicerev=3 androidbo
INFOot.batt_poweron=good_battery androidboot.carrier=Rogers andr
INFOoidboot.mid=PJ4011000 androidboot.keycaps=qwerty androidboot
INFO.dq=FAIL androidboot.mode=normal androidboot.serialno=HT265W
INFO405171 androidboot.bootloader=1.13.0000 androidboot.nledhw=0
INFO zygote_oneshot=off kmemleak=off rpm_debug.enable=0 console=
INFOttyHSL0,115200,n8
INFOaARM_Partion[0].name=misc
INFOaARM_Partion[1].name=recovery
INFOaARM_Partion[2].name=boot
INFOaARM_Partion[3].name=system
INFOaARM_Partion[4].name=local
INFOaARM_Partion[5].name=cache
INFOaARM_Partion[6].name=userdata
INFOaARM_Partion[7].name=devlog
INFOaARM_Partion[8].name=pdata
INFOaARM_Partion[9].name=fat
INFOaARM_Partion[A].name=extra
INFOaARM_Partion
.name=radio
INFOaARM_Partion[C].name=adsp
INFOaARM_Partion[D].name=dsps
INFOaARM_Partion[E].name=wcnss
INFOaARM_Partion[F].name=radio_config
INFOaARM_Partion[10].name=modem_st1
INFOaARM_Partion[11].name=modem_st2
INFOpartition number=18
INFOValid partition num=18
INFOTZ_HTC_SVC_SET_DDR_MPU ret = 0
INFOsmem 90006000 (phy 90006000): TZ_HTC_SVC_UPDATE_SMEM ret = 0
INFOTZ_HTC_SVC_LOG_OPERATOR ret = 0
INFOTZ_HTC_SVC_ENC ret = 0
INFOTZ_HTC_SVC_DISABLE ret = 474079232 (0x1C41E000)
INFOjump_to_kernel: machine_id(3751), tags_addr(0x80400100), ker
INFOnel_addr(0x80408000)
INFO-------------------hboot boot time:198169 msec
FAILED (status read failed (Too many links))
finished. total time: 6.947s