[N7105] Stock ROM for N7105, Guide for installation & Root. - DISCONTINUED

Search This thread

PhillTheChill

Member
Dec 19, 2005
9
2
I want to use your "Method 2: Root with CWM recovery" to root/custom recovery/ flash DN3 to my N7105 and am wondering if its ok to install the "UPDATE-SuperSU-v1.94.zip" file from the CF-Root download page (http://download.chainfire.eu/396/SuperSU/) instead of using your "SuperSu and busybox" download as your linked version of SU is 0.98 and the newest version is 1.94?
 

botski

Senior Member
May 12, 2010
1,687
97
May i ask for your help? I had Note 2 E250K 4G LTE 32GB. I just to flash with a different country because i dont like the korean apps, SMS Limit and the Korean numbers in phone keypad in calllog.

I just want to root,flash a stocked rom CWM installed. Please help me.
 

smokerman

Inactive Recognized Contributor
Feb 15, 2012
4,411
3,752
Esposende
smokermanxda.blogspot.pt
OnePlus 8
i have a note 2 nt7105 with android 4.3.1 updated and cant root..i did the first method and supersu appears..but it says stopped and a security message from samsung..:rolleyes:

what can i do?
 

Attachments

  • Screenshot_2014-06-09-03-21-05.png
    Screenshot_2014-06-09-03-21-05.png
    96.1 KB · Views: 778
  • Screenshot_2014-06-09-03-21-56.png
    Screenshot_2014-06-09-03-21-56.png
    128.7 KB · Views: 774
  • Screenshot_2014-06-09-03-22-16.jpg
    Screenshot_2014-06-09-03-22-16.jpg
    88.4 KB · Views: 749
  • Screenshot_2014-06-09-03-22-26.png
    Screenshot_2014-06-09-03-22-26.png
    36.6 KB · Views: 764
Last edited:

tjlabais

Senior Member
Oct 31, 2007
300
22
anyone can point me to where I can download a full firmware with full bootloader, pit file, etc. All the ROMs I downloaded dont have them and I think my bootloader is partially corrupted. when I go into download mode there are no device info that would appear on the upper left hand side of the screen among other problems...

any help is much appreciated.
 

DiogoCV

Member
Jan 7, 2013
36
3
Lisbon
anyone can point me to where I can download a full firmware with full bootloader, pit file, etc. All the ROMs I downloaded dont have them and I think my bootloader is partially corrupted. when I go into download mode there are no device info that would appear on the upper left hand side of the screen among other problems...

any help is much appreciated.
Have you tried this link?
http://www.sammobile.com/firmwares/2/

Sent from my GT-N7105 using Tapatalk
 

tjlabais

Senior Member
Oct 31, 2007
300
22
Yesm i have downloaded the firmware there and extracted sboot.bin and repacked it as a tar.md5 file for odin flashing. However the bootloader file wont flash. And if I flash the full firmware my bootloader stays the same. So I was hoping the service firmware would help but theres no linkm

Sent from my GT-N7105 using XDA Free mobile app
 

Optimistic Pessimist

Senior Member
Mar 22, 2013
163
55
Sydney
A.Tools

4.Pit file : Not for normal flashing, and shud be use under expert advise only.

HI dr.ketan,

Would like to know if this .pit file is suitable for use on a N7105 with bootloader XXDMC3?
Reason I ask is I'm have this problem which is explained here; and would like to know if this would possible resolve it.

Currently running teshxx's Deodexed XXDMC3 romm, which surprisingly was flashed from Philz CWM with no issues (so far).
So it would seem that flashing any custom CM rom either with Philz CWM 6.48.4 or TWRP (either 2.8.4.0 or 2.8.0.1) results in the phone being stuck at that Roms boot animation

I ran the DiskInfo app, which shows the internal storage (MMC) as:
BOTA0 mmcblk0p1 = not mounted 4MB
BOTA1 mmcblk0p2 = not mounted 4MB
EFS mmcblk0p3 = 4.7mb used of 20MB
m9kefs1 mmcblk0p4 = not mounted 4MB
m9kefs2 mmcblk0p5 - not mounted 4MB
m9kefs3 mmcblk0p6 = not mounted 4MB
PARAM mmcnlk0p7 = not mounted 8MB
BOOT mmcblk0p8 - not mounted 8MB
Recovery mmcblk0p9 = not mounted 8MB
RADIO mmcblk0p10 (/firmware) = 45.3MB used of 199MB
TOMBSTONES mmcblk0p11(/tombstones) = 150MB used of 256MB
Cache mmcblk0p12 (/cache) = 45.2MB used of 1.3GB
System mmcblk0p13 (/system) = 1.2GB used of 2GB
HIDDEN mmcblk0p14 = not mounted 560MB
OTA mmcblk0p15 = not mounted 8MB
Data (USERDATA) mmcblk0p16 = 656MB used of 10.4GB

TMPFS mount points:
/dev = 84KB used of 895MB
/mnt/asec = 0Kb used of 895MB
/mnt/obb = 0KB used of 895MB​

Not sure if the above info is of any use though.

Thanks
 

dataonly76

Senior Member
Jul 15, 2014
68
1
dr ketan
my n7105 has baseband n7105tdvuemk3, is there a pre-root rom for it or i have to get the one from sammobile? I found 3 that matches my baseband from sammobile so does it matter which one 1 choose?
Currently I have the twrp 2.8.5 installed (long story why i had that installed in the first place), and superuser 2.4.6 installed, can i still use the methods listed at the beginning of the thread to restore it back to stock rom before selling it? can i use twrp to reflash it back to stock rom?
do i need to do triangle away since it will never be sent back to samsung for warranty?
 

thuva.lk

New member
Jun 1, 2016
3
0
i can't install stock rom

in my n7105(note 2 lte)i can't install stock Rom,i got many error from Odin,first of all i ry to get the recovery mode but it can't only download mode is coming, if i switch on my 4n it stuck in the logo the i decided to flash and install the ROM but it can't to be done i think my phone boot loader is deleted automatically so i decided o install boot loader bu pit partition error occurred then re partition failed error i try so many ways but i can't get fied so plz help me
 

cool zero

Member
Nov 9, 2010
6
0
Hi for all of the tools mentioned, like Odin, EFS...
Is it necessary to check/set the setting of PhoneUtil by dialing the *#7284*
What should be the settings on each software before using it?
UART = Modem or PDA
USB = Modem or PDA
Qualcomm USB Settings = MTP or MTP+ADB or PTP or PTP+ADB or RNDIS+DM+Modem or DM+Modem+ADM
 

Attachments

  • PhoneUtil.jpg
    PhoneUtil.jpg
    154.2 KB · Views: 366

sealover1

Member
Sep 9, 2012
46
2
Devon
Samsung Galaxy Note 2 GT-N7105

Hi has anyone got a working link to download the 4.1.1 stock rom for my Samsung Galaxy Note 2 GT-N7105 which has 4.2.2 on it I,m trying to downgrade so I can unlock to any network and cant get to the hidden menu :(
 

gregsarg

Senior Member
Apr 8, 2011
5,149
4,078
B.F.E.
when i flash the stock firmware for n7105 odin always fails on sboot.bin NAND write(start) .. why is this please? i recently installed 7.1.1 CM rom. thanks

thanks
You are most likely attempting to overwrite your boot loader when restoring the stock firmware.
If your device has the locked loader (NE5 or higher) then your flash will fail.

The best way around this is to use a stock build with the boot loader removed.
We have several files in the general section that meet these requirements.
That should get you around the sboot error and back to stock firmware...g
 
  • Like
Reactions: jabbarh123

J-Dayz

Member
Nov 1, 2017
33
1
Regina
Samsung Note 2 GT-N7105

Stock ROM N7105 & How to Root. -



Who are on 4.1.1 firmware, are requested to update their device to latest 4.1.2 (2013 released) as soon as possible, older ROMs have SDS (sudden death syndrome) bug and can brick device spontaneously. latest ROMs are believed to be patched for this bug with kernel and recovery.






Stock ROMs for N7105
4.1.2 Feb 13




LINKS REMOVED





Installation Instruction [Mobile odin is now have support for NOTE2]

Make sure you have installed Kies OR Samsung USB driver
Open up the S/W Installation Program by executing the Odin3 v3.04.exe
1. Enable the check mark by click on the following options(default Option)
- Auto Reboot, and F. Reset Time
- Download ROM and extract (unzip tool)
- Check PDA, and point to ROM file you have extracted

attachment.php


2. Now switch off device and Enter into Download Mode
- Enter into Download Mode by pressing Volume Down button, Home Key and
Power Button simultaneously. And then, press Volume UP button in Warning Page to enter the Download Mode.

attachment.php
attachment.php


3. Connect the device to PC via Data Cable.
Make sure that the one of communication port [ID:COM] box is highlighted in
light blue. The device is now connected with the PC and ready to download the
binary file into the device.

4. Start downloading binary file into the device by clicking Start Button on the screen.
the green colored "PASS!" sign will appear on the upper-left box if the binary file
has been successfully downloaded into the device.
Vol Down Power Key
Home Key
attachment.php

Ignore re-pertition,PIT, phone and CSC tab selected in this image


5. Disconnect the device from the Data cable.
6. Once the device boots up, you can check the version of the binary file or name
by pressing the following code in sequence;
*#1234#
You can perform full reset by pressing the following code in sequence;
*2767*3855#

Flashing firmware with Mobile odin to keep root intact and flash counter untouched - Here

Flashing with heimdall - Here -(thanks to as i9000)


First thing I do recommend just after flashing ROM
-Register to samsung A/C and enable Remote control
Here is detail guide.


Sorry to bother you I/m at the Samobile site trying to find the North America Stock Firmware any help would be great thank you for your time
 

maxisgsm

Member
Jul 6, 2010
21
1
Hello,

I try to restore my phone to stock ROM, but error. before this i install TWM and LineageOS.
any tutorial to go back to stock ROM??

odin.png
 

maxisgsm

Member
Jul 6, 2010
21
1
You are most likely attempting to overwrite your boot loader when restoring the stock firmware.
If your device has the locked loader (NE5 or higher) then your flash will fail.

The best way around this is to use a stock build with the boot loader removed.
We have several files in the general section that meet these requirements.
That should get you around the sboot error and back to stock firmware...g

hello greg, can you recommend the ROM without bootloader. thank you
 

Top Liked Posts

  • There are no posts matching your filters.
  • 40
    Stock ROM N7105 & How to Root. -

    Thread Index
    1.Stock ROM installation - Source & Credits to sammobile - Linux user Here
    2.How to Root Note 2(n7100)
    3.Reset Flash Counter
    4.Toolbox
    5.Flash ROm using Mobile odin to keep root intact & flash counter untouched

    Who are on 4.1.1 firmware, are requested to update their device to latest 4.1.2 (2013 released) as soon as possible, older ROMs have SDS (sudden death syndrome) bug and can brick device spontaneously. latest ROMs are believed to be patched for this bug with kernel and recovery.


    Here is guide how to find stock ROM from SamMobile

    ** Guide showing images are for demonstration and which showing model number may be varies from yours, you have to select your device model number i.e N7105


    - Open This SamMobile firmware page.


    - Type device Model number in search box
    gp4n.png



    - This will find all latest ROM for that device, click on Kies symbol next you your desired ROM to get download link.
    ml5s.png



    - To get ROM from specific country, select Firmware option on page
    y8bu.png



    - Fill up required option. This will show all available ROM from selected country.
    q015.png



    Stock ROMs for N7105
    4.1.2 Feb 13




    LINKS REMOVED





    Installation Instruction [Mobile odin is now have support for NOTE2]

    Make sure you have installed Kies OR Samsung USB driver
    Open up the S/W Installation Program by executing the Odin3 v3.04.exe
    1. Enable the check mark by click on the following options(default Option)
    - Auto Reboot, and F. Reset Time
    - Download ROM and extract (unzip tool)
    - Check PDA, and point to ROM file you have extracted

    attachment.php


    2. Now switch off device and Enter into Download Mode
    - Enter into Download Mode by pressing Volume Down button, Home Key and
    Power Button simultaneously. And then, press Volume UP button in Warning Page to enter the Download Mode.

    attachment.php
    attachment.php


    3. Connect the device to PC via Data Cable.
    Make sure that the one of communication port [ID:COM] box is highlighted in
    light blue. The device is now connected with the PC and ready to download the
    binary file into the device.

    4. Start downloading binary file into the device by clicking Start Button on the screen.
    the green colored "PASS!" sign will appear on the upper-left box if the binary file
    has been successfully downloaded into the device.
    Vol Down Power Key
    Home Key
    attachment.php

    Ignore re-pertition,PIT, phone and CSC tab selected in this image


    5. Disconnect the device from the Data cable.
    6. Once the device boots up, you can check the version of the binary file or name
    by pressing the following code in sequence;
    *#1234#
    You can perform full reset by pressing the following code in sequence;
    *2767*3855#

    Flashing firmware with Mobile odin to keep root intact and flash counter untouched - Here

    Flashing with heimdall - Here -(thanks to as i9000)


    First thing I do recommend just after flashing ROM
    -Register to samsung A/C and enable Remote control
    Here is detail guide.
    16
    How to Root N7105

    Map for this post
    How to root N7100
    Advantages and disadvantages of each method of root.
    Method 1:Root with stock Recovery
    Method 2: Root with CWM recovery
    Method 3 : Root with simple APK
    EFS Backup
    Unroot N7100

    -----------------------------------------------------------------------------

    How to Root N7105
    Big Thanx to Chainfire and Chenglu for great work.
    You can get root access by A.Rooting your existing and desired ROM or B.Flashing prerooted ROM.

    Select your choice from one of this
    1. Root with Stock Recovery - It will give full root access but have stock recovery. You can set your flash counter '0' and so ready to claim warranty.If you want device full stock + root this is choice for you.
    2. Root + Advanced CWM - This will give Root access as well advanced CWM - Here you can reset counter, but once reboot to recovery, it will raise flash counter, Find option to reset counter on every boot (only play store version).
    3.Root with ExynosAbuse apk - simply install apk to gain root access.

    So which one I should select? OR Which one is better?
    Both Methods are given by elite developer and both are good, but both having its cons and pros. e.g.
    Method 1:
    Disadvantage : Here you will get full root access, but here recovery will remain stock, so you won't have option to flash zip files (still you can flash zip with Mobile Odin), but you won't have any option for Nandroid backup/Restore.
    Advantage : You have to reset flash counter once only, then whenever you need to reset to unroot/ready to claim warranty, just you need to go to superSU - setting - unroot.
    So If you are Flash counter conscious and really don't have need for nandroid backup, This one is for You.
    Method 2:
    Disadvantage : Note2 having auto check sum boot loader and it will check for custom things on every boot. So rooting with this method your counter will remain 1, even if you have reset it with triangle away. Though one possibility is there to reset counter, you have to use market version of Triangle Away with option 'Reset counter on every boot'. But keep in mind this option only available if your kernel support this, stock kernel won't support it. Again before claiming warranty you need to flash stock recovery.
    Advantage : You will have feature rich recovery like flashing zip from recovery and Nandroid backup/Restore.
    So If you are not much worrying about flash counter or warranty and you really need Nandroid backup, This one is for you.
    Method 3:
    Advantage :Simply install apk to root device, No flashing/Resetting counter needed.
    Disadvantage : Read below mentioned thread for security issue.

    1.Root with Stock Recovery - CF auto Root from Chainfire - can keep counter '0'
    Big Big Thanks to Chainfire for giving this, Here is source thread

    Download this CF Auto Root package
    and extract it to .tar

    Procedure :
    Make sure you have installed Kies OR Samsung USB driver
    1.Open Odin and select PDA tab
    2.Point to extracted file CF-Auto-Root-SGN2.tar (see image below)
    3.Now switch off device and reboot in download mode
    press Vol down + Home +Power, And then, press Volume UP button in Warning Page to enter the Download Mode
    4.Connect device to PC and wait till device successfully added to com port (it will turn light blue) (see image below)
    5.Hit ‘Start’ to flash
    6.Once it flashed successfully, you can see 'PASS' in table above the ID :COM, you can disconnect device from PC
    7.Reboot device and you will have superSU in application drawer.

    attachment.php


    Now you can use Triangle away and reset counter '0', Read Next post (post#3)

    Again All credits goes to Chainfire, your support to Chainfire


    2. Root with Advanced CWM - By Phil3759
    Big Thanx and credit goes to Chenglu & Phil3759
    Download :
    1.
    Download Phills touch enhanced recovery - This recovery using SDS patched kernel code
    [ Here you can find detail fuction of recovery as well support related to recovery] again big thanx and credit goes to Phil3759
    2. download SuperSu and busybox and copy zip file to Sd card of device

    Procedure :
    Step 1
    Make sure you have installed Kies OR Samsung USB driver
    1.Open Odin and select PDA tab (see image below)
    2.Point to recovery file you have downloaded philz_touch_* -n7105.tar.md5
    3.Now switch off device and reboot in download mode
    press Vol down + Home +Power, And then, press Volume UP button in Warning Page to enter the Download Mode
    4.Connect device to PC and wait till device successfully added to com port (it will turn light blue) (see image below)
    5.Hit ‘Start’ to flash
    6.Once it flashed successfully, you can see 'PASS' in table above the ID :COM, you can disconnect device from PC

    attachment.php


    Note :
    normally, phone should auto-reboot into recovery.
    If it reboots into android and your recovery remains stock, repeat above steps and untick "autoreboot" in odin. Once flash is done, keep pressing power button until it reboots (normally will go to recovery)
    when in recovery, if you choose option "reboot system now" and you get "yes - disable flash recovery", select that option to avoid stock recovery overwriting cwm
    Step 2 :
    Now reboot to recovery and flash superSu and busy box file from recovery, which you have copied to Sd card


    3.Root with apk No counter reset needs, Easiest - Credit goes to Chainfire, alephzain

    1.Download latest from chainfire's original thread
    2.Install application as routine apk installation and open it.
    3.Open Exynos Abuse application from App drawer
    4.Select Root device (see image)
    attachment.php


    5.It will ask SuperSU permission, Grant it See image)
    attachment.php


    6.Now your device is rooted, for security purpose you can disable Exploit.(see image)
    attachment.php

    Note : This may break camera, but unchecking disable exploit make it working again

    7.Open SuperSU from app drawer and update binary (see image)
    attachment.php


    How to Unroot and make status Normal
    Open Exynos Abuse app, uncheck disable explot and select Unroot device (see image)
    attachment.php


    Restart device and wait for 10 min. and then you can check status.

    Reseting Counter
    Above method will raise flash counter and you will need to reset counter to reclaim warranty, Read next post for it (post#3)


    First thing I do recommend after rooting device
    EFS Backup

    Why so?
    EFS folder contains some important and some basic info related to our device identity like Wi-Fi address, Bluetooth MAC address and the very main IMEI address (nv_data.bin).
    Now if this EFS partition accidently corrupted then your phone’s IMEI no. will erased and you can not make voice call further. This kind of damage is often not accepted by the service center of your respected handset’s company.
    Here your backup can only be savior for you.

    How to Unroot :

    - This is commonly needed before sending it to service station and reclaim warranty.
    1.As discussed in post #3 if you have any custom recovery/Kernel first you need to replace it with stock one. If you have custom ROM, then you will have to flash stock ROM.(you can use mobie odin to keep root intact to reset counter)
    2.You need to use Triangle away if your binnary count is non zero (read post #3)
    3.Once your flash counter is 'No' then you can simply unroot from superSU setting
    if your device status is -Modified, you can do this trick to reset to normal
    setting - appl manager - All - clear data for SysScope as well Enterprise SysScope
    This should change system setting to Normal
    If still you have modified status, you can wipe cache and data from recovery.
    If still it doesn't change status, try removing Ext SD card
    4. This is optional but full proof method to unroot and won't leave any footprint of previous root.(provided you flash counter is 'No')
    -Flash Stock ROM with PC Odin
    -Wipe cache and data.

    All credits goes to
    Chainfire and Chenglu

    Apart from described above, you can get root access without raising counter by flashing pre rooted ROM, for further detail read this
    7
    Reset Flash Counter

    There is great tool from elite developer Chainfire known as Triangle Away

    From CF -
    When you run TriangleAway, if your device and firmware are supported, it will show you the detected state of the binary (custom or official) and flash counter value, and the option to Reset flash counter. Please confirm that the information shown is correct before resetting the values.

    On a number of devices, TriangleAway can work, but your firmware may not be supported directly. In that case, the app will tell you it needs to reboot into a special boot mode, which will be happen if you select Reset flash counter. The device will reboot into a special mode which will allow you to review the current status and reset the binary and flash counter values (or abort and do nothing.)
    using Triangle Away may unmount your SD card. Reboot or manually remount it from Android settings.

    Source and full thread by Chainfire

    Get Triangle Away to support CF

    Steps to reset counter
    -Download Triangle away and install
    -Open Triangle away from appl drawer, grant SU permission
    -Depends on your recovery/kernel, it may ask to download add on about 7.4MB file, dwnload it.
    -After downloading select reset counter from application menu
    -This will reboot device in special recovery, and you will see some colored text menu with big yellow, with round circle exclamation mark.
    -Read available option, confirm your flash counter showing on this page and select appropriate menu(vol up) to reset counter.
    -Your device will reboot and you will have counter '0'
    In case if you are using CWM it may raise again on reboot, read below.



    NoteII having new bootloader with auto checksum of recovery, so If you are using custom recovery flash counter may raise again on rebooting to recovery
    So if you are using stock recovery, reseting count to '0' with triangle away is enough. In case you are using custom recovery, even after reseting counter again it will raise to 1 if you reboot device to recovery. For this you have to use option 'Reset at every boot' in triangle away. This option is available on Play version, and only you can see if you have custpm recovery and your kernel support it. (Redpill kernel reprted to support this feature of TA)

    Common question about reseting counter

    I have reset counter but system status still 'custom'
    You should have stock recovery (Method A in post#2)
    If you already have stock recovery(CF Auto root) then reset counter first
    then wipe cache + wipe data(factory reset) + re wipe cache
    You should now have system status 'official'
    I have rest counter but after reboot again it goes to 1
    This happen if you have rooted with chenglu's recovery(method 2 in post#2)
    This is neither error of recovery nor triangle away. This happens due to new bootloader which have auto checksum for recovery, when you reboot to custom recovery count will raise.
    To prevent this you need to have play version of Triangle away, and you should check (enable) 'Auto reset at boot'. Again this feature depends on kernel/recovery is supported or not, Redpill kernel reported to support this.
    6
    A.Tools

    1.Odin 3.07 - Requires to flash ROM/Kernel/Modem.Using this to flash custom stuff will raise flash counter.

    2.Samsung USB Driver 1.5.6 - Requires to connect your device to PC

    3.Unzip Tool - Unzip tools to extract files

    4.Pit file : Not for normal flashing, and shud be use under expert advise only.

    5.Opera Portable Browser (supports resume download)

    6.Check fus downloader - To download ROM which is currently available on Kies

    7.Stock Kernels -

    8.bootloader

    9.N7100 Service manual + Quick start guide + User Guide of Galaxy Note2.

    10.Screen lock password recovery - If you forget your pasword of screen, this can be saver for you, pro version also available. read on play store for detail

    11.EFS backup tool - Very very important tool, If your device is rooted, first thing you need to do is EFS backup.

    12.Call Recording - Read Xposed framework

    13.Samsung Kies

    14.Network unlock

    15.Busybox

    16.Triangle Away - Utility to reset counter and remove exclamation mark.

    17.Transfer Data - Wireless transferring contacts/SMS (via Bluetooth) from your old device to Note.

    18.SMS Backup & Restore- Simple SMS backup utility, useful before wiping data.

    19.Undelete Files This application useful to recover data, if you have accidently deleted file from SD card/USB storage. This required Root.

    20.ROM Cleaner - Remove bloatware,backup application and more

    21.Directory bind - Useful to move data to Ext SD card, this helps in making free space on internal memory, as well it help to keep data on factory reset (Note 2 erases data on internal memory while factory reset.) If you bind such folder to Ext SD card then you won't need to backup those data.

    22. Exfat support for XP - This is small window tool for XP machine, you can get support for exfat on XP. install 32/64 bit according your OS.

    23.Quiet balance : if you are pissed off from carrier popup msgs after each call and data connection, here you can block it.

    24..EFS repair Though EFS backup is best to have, but unfortunately you don't have, then worth to try with this.

    25.Language enabler : This application will allow you to enable all those hidden languages which may be blocked by carriers

    26. APN database - when you are unable to connect to network and missing correct APN setting, this may helpful to you.
    4
    Flash firmware using Mobile odin to keep root intact & counter untouched.

    Flash firmware using Mobile odin to keep root intact & counter untouched.

    If you have device already rooted, you can use Mobile Odin to flash stock firmware to keep Root intact, as well flash counter will also remain untouched.

    Here is example to flash leaked firmware LJ2 4.1.2 (Images shown is from N7100 and demo purpose only, you will have to select 7105 ROM)

    1.Download & extract ROM file and Copy to SD card.

    2.Install Mobile Odin Pro
    When you first time open Mobile Odin, it will ask to download required flasher file.
    3.Open Mobile odin - select open file

    attachment.php


    4.Point to ROM file you have copied

    attachment.php


    5.It will fill up all available field automatically

    attachment.php


    6.select Ever root option and check mark 'Inject SuperSU' And Then Flash.

    attachment.php


    Device will reboot in special recovery and firmware will be flashed
    After finishing flashing device will be reboot normally and you will have SuperSU installed and flash counter will remain untouched too.