License file is REAL license = You have NAV like from factory 
MyFord Touch Navigation Activation Only
- Thread starter seadiel
- Start date
License file is REAL license = You have NAV like from factory
My only problem is that Sirius can't or won't activate a subscription for nav traffic and weather. They say my radio's original ID comes back in their system as not capable. Stinks because those were really the only reasons I wanted the nav.
I could be wrong on this; however, I believe your radio must have HD radio in order to get the traffic link. You can find them on eBay or websites that sell "upgrades". I've purchased one for my F150, but i haven't had the opportunity yet to swap it. I've read on other forums of people successfully doing the swap, calling SiriusXM and having them transfer their sub and enabling traffic.
I picked up the radio for around $75 shipped.
I am curious if Vincent or tedi have an experience retrofitting/reprogramming a Sync3 APIM and screen into a Sync2 vehicle...
:laugh: That is exactly what I was looking for. Thanks!
---------- Post added at 01:09 PM ---------- Previous post was at 12:40 PM ----------
Do you lose it after an update?
Answered my own question: I reprogrammed the APIM using IDS and the Ford website, and it still shows nav is enabled. However, I am still unable to get it to read the SD card. I will be looking into getting or making a card, but the card I have is A4, and it works in any other vehicle.
Vinc, your 3.08 Navigation Update file is old and 3.10 is incomplete. Use the following AF / AG Navigation Update as future reference:
https://mega.nz/#!xtQBCRhY!g4x3KVBFncz0MGraP0i_dNP6uS-M3s4RhTv85JsjozA
These versions will not require a MFT master reset after NaviPatch.png
Plus, here's the full 3.10.16180 European revised update (EU-Lang pack3 EN-GB_DE-DE_FR-FR_IT-IT) as I got tired of all the trouble versions floating around:
https://mega.nz/#!M1Jh1LhD!KnpCrzB-xY1FHw2bdvmg0KFNGzwzUm9aGC8ngu0_m4A
Possible 3.10 EU language packs are:
1. EULangpack1 DE-DE_EN-GB_RU-RU_TR-TR http://ivsu.binaries.ford.com/swparts/EA5T-14F497-BF_64703.ZIP
2. EULangpack2 DE-DE_EN-GB_PL-PL_RU-RU http://ivsu.binaries.ford.com/swparts/EA5T-14F497-CF_64704.ZIP
3. EULangpack3 DE-DE_EN-GB_FR-FR_IT-IT http://ivsu.binaries.ford.com/swparts/EA5T-14F497-DF_64705.ZIP
4. EULangpack4 DE-DE_EN-GB_FR-FR_SV-SE http://ivsu.binaries.ford.com/swparts/EA5T-14F497-EF_64706.ZIP
5. EULangpack5 EN-GB_ES-ES_FR-FR_PT-PT http://ivsu.binaries.ford.com/swparts/EA5T-14F497-FF_64707.ZIP
6. EULangpack6 DE-DE_EN-GB_FR-FR_NL-NL http://ivsu.binaries.ford.com/swparts/EA5T-14F497-GF_64708.ZIP
by replacing the EA5T-14F497-xF file inside SyncMyRide folder and inside autoinstall.lst
And here is the full 3.10.16180 US revised update (NA-Lang pack EN-US_FR-CA_ES-US for Ford/Lincoln, VHR discontinued and removed)
https://mega.nz/#!Jk4hzSZD!NNOw8g9BkciF4GREYnzCL3i5gokxCemgAzykCi47NMw
Possible 3.10 US language packs are:
1. South America EN-US_PT-US_ES-US http://ivsu.binaries.ford.com/swparts/EA5T-14F497-HE_64709.ZIP
2. Australia EN-AU http://ivsu.binaries.ford.com/swparts/EA5T-14F497-LF_64711.ZIP
by replacing the EA5T-14F497-xE file inside SyncMyRide folder and inside autoinstall.lst
Ignore the final 3.8 confirmation prompt, it's 3.10. In case anyone wants a different splashscreen, it can be installed easily by modifying autoinstall.lst in the following installation:
https://mega.nz/#!V44iWKBC!Gflsjkh4gVsz5vFIlPL8_g7r1JmrqSx6Nxp-H3k3tg0
EA5T-14F496-MA - Custom Animation application (FOR FORD F-150 RAPTOR).
EA5T-14F496-PA - Custom Animation application (FOR MUSTANG).
EA5T-14F496-RA - Custom Animation application (FOR LINCOLN BLACK LABEL).
EA5T-14F496-SA - Custom Animation application (FOR LINCOLN PRESIDENTIAL).
EA5T-14F496-TB - Custom Animation application (FOR FORD MONDEO VIGNALE).
EA5T-14F496-UA - Custom animation application (FOR EU MARKET FORD VEHICLES).
https://mega.nz/#!xtQBCRhY!g4x3KVBFncz0MGraP0i_dNP6uS-M3s4RhTv85JsjozA
These versions will not require a MFT master reset after NaviPatch.png
Plus, here's the full 3.10.16180 European revised update (EU-Lang pack3 EN-GB_DE-DE_FR-FR_IT-IT) as I got tired of all the trouble versions floating around:
https://mega.nz/#!M1Jh1LhD!KnpCrzB-xY1FHw2bdvmg0KFNGzwzUm9aGC8ngu0_m4A
Possible 3.10 EU language packs are:
1. EULangpack1 DE-DE_EN-GB_RU-RU_TR-TR http://ivsu.binaries.ford.com/swparts/EA5T-14F497-BF_64703.ZIP
2. EULangpack2 DE-DE_EN-GB_PL-PL_RU-RU http://ivsu.binaries.ford.com/swparts/EA5T-14F497-CF_64704.ZIP
3. EULangpack3 DE-DE_EN-GB_FR-FR_IT-IT http://ivsu.binaries.ford.com/swparts/EA5T-14F497-DF_64705.ZIP
4. EULangpack4 DE-DE_EN-GB_FR-FR_SV-SE http://ivsu.binaries.ford.com/swparts/EA5T-14F497-EF_64706.ZIP
5. EULangpack5 EN-GB_ES-ES_FR-FR_PT-PT http://ivsu.binaries.ford.com/swparts/EA5T-14F497-FF_64707.ZIP
6. EULangpack6 DE-DE_EN-GB_FR-FR_NL-NL http://ivsu.binaries.ford.com/swparts/EA5T-14F497-GF_64708.ZIP
by replacing the EA5T-14F497-xF file inside SyncMyRide folder and inside autoinstall.lst
And here is the full 3.10.16180 US revised update (NA-Lang pack EN-US_FR-CA_ES-US for Ford/Lincoln, VHR discontinued and removed)
https://mega.nz/#!Jk4hzSZD!NNOw8g9BkciF4GREYnzCL3i5gokxCemgAzykCi47NMw
Possible 3.10 US language packs are:
1. South America EN-US_PT-US_ES-US http://ivsu.binaries.ford.com/swparts/EA5T-14F497-HE_64709.ZIP
2. Australia EN-AU http://ivsu.binaries.ford.com/swparts/EA5T-14F497-LF_64711.ZIP
by replacing the EA5T-14F497-xE file inside SyncMyRide folder and inside autoinstall.lst
Ignore the final 3.8 confirmation prompt, it's 3.10. In case anyone wants a different splashscreen, it can be installed easily by modifying autoinstall.lst in the following installation:
https://mega.nz/#!V44iWKBC!Gflsjkh4gVsz5vFIlPL8_g7r1JmrqSx6Nxp-H3k3tg0
EA5T-14F496-MA - Custom Animation application (FOR FORD F-150 RAPTOR).
EA5T-14F496-PA - Custom Animation application (FOR MUSTANG).
EA5T-14F496-RA - Custom Animation application (FOR LINCOLN BLACK LABEL).
EA5T-14F496-SA - Custom Animation application (FOR LINCOLN PRESIDENTIAL).
EA5T-14F496-TB - Custom Animation application (FOR FORD MONDEO VIGNALE).
EA5T-14F496-UA - Custom animation application (FOR EU MARKET FORD VEHICLES).
Last edited:
Ok folks. I have a question. Successfully activated navigation in my wife's car which is 2013 Ford Escape SEL. Also I was able to activate it in my brothers 2014 Ford Escape SEL. But at the time of activation we did not have a SD card on us. So today he told me he tried SD card and it won't read it. Here is the thing. I forgot to update his ford to 3.8 and we never checked what version he got. So is this might causing the problem? Like I said navigation is activated ( Insert SD card in top right corner). Or it might be something else? What will be my next step to not screw up anything?
Nope it'll work after the upgrade to 3.8. I did the same thing because it said I had the latest version of sync (3.6). Found out after it wasn't 3.8. Did the update to 3.8 and it all worked fine.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
15people ask what I need to activate the navigation?
1. update Sync2 system to version 3.8.15128
US ONLY : HERE
For EUROPE : HERE
and others language pack
2. with Forscan Extended License you have to change APIM Navigation configuration (7d0-01-02. Byte 1 = 00 No Nav. Byte 1 = 04 with Nav);
3. install license (send me PM)
4. to work you need to have the map A (x) for the United States and F (x) for Europe13How to active MyfordTouch Navigation
As noted by flsdiver in the previous myfordtouch thread
(http://xdaforums.com/windows-mobile/general/myford-touch-hack-enable-features-t3321397/page13)
Modify the APIM as-built data using Forscan (you will need to request an extended license for Forscan)
You will also need a ELM327 device that can do HSCAN/MSCAN.
1) Program APIM using Forscan & ELM327 device. Change the as built data bit with
(7d0-01-02. Byte 1 = 00 No Nav. Byte 1 = 04 with Nav)
Turn key off, turn on, sync black screen for a bit, then performing routine system maintenance.... for about 2 mins.
*Unknown if ACM as built data bit needs to be changed yet.
2) Program ACM as build with bit mentioned in this thread. Not sure needed/what it does but I did it anyway.
3) New method seems to be either getting a license file from vincentka post 535 (http://xdaforums.com/showpost.php?p=68993515&postcount=535)
OR
Using the PNG file described here https://www.drive2.ru/l/10018006/ posted by rmcgry
http://xdaforums.com/showpost.php?p=69046248&postcount=545
Download license (BT4T-14F500-BE) from URL attached in the excel document. You will need to replace “YAABBCCD” in the URL section and provide your vehicle’s ESN number otherwise it won’t work. This appears to be case sensitive so make sure it is all uppercase letters.
You can get the ESN number in the settings section on the myfordtouchunit. You do not need to change anything else in the URL.
*To do non-north america and non-latest software you will need all the proper field values for your vehicle from the as build and from the current software installed on the vehicle.
All credit goes to flsdiver for the URL/Excel doc/steps needed.
*Ford could change this URL and this would no longer work!
4) *This step may not be needed depending on if you are using the PNG file method. Create the USB device and edit the autoinstall.lst file to only install the BT4T-14F500-BE file.
5) Stick in A7 nav SD Card.
6) Enjoy the trip!9For the long winded explanation, and those that what to put the pieces together...
Background:
APIM = Accessory Protocol Interface Module it is what holds the software that runs MFT.
ACM = Audio Control Module (Radio)
IPC = Instrument Panel Control Module
ESN = APIM Serial Number.
The Module Id of the APIM is 7D0 on the can-bus.
The APIM must be programmed with as build data to turn on NAV, more on that later.
I programmed the APIM bits via obdII 1st then did the nav/license install, not sure order matters or not.
Optionally the ACM bit can be set (this is very vehicle specific).
The NAV software license must be installed on the APIM via a normal USB update process.
The NAV software license must be digitally signed by f0rd for the serial number (ESN) that is on your APIM.
See other discussions for why one license file does not work in all vehicles (or you wouldn't be reading this thread, everyone would have NAV)
When done correctly you will see the license show up on the MFT license screen.
Sources of data regarding your APIM:
1) Get the As Build data for your vehicle.
this contains some of the values needed to build the software unlocker url and contains the 7d0
motorcraftservice.com/AsBuilt put in VIN
download file and save as xml (it's easier to read than .ab with simple browser)
also, i save this page as html file (ctrls) so that i can easily reference the modules/addresses and compare data for apim/acm.
this is sample of 7d0 apim as build data that determines what is or is not installed on your vehicle
This is an excerpt from the as build file that contains the software values for the apim, you will need this to build proper software download url.Code:APIM 7D0-01-01 2AAA 0006 03B6 7D0-01-02 0409 0604 8071 7D0-02-01 5553 0103 8006 7D0-02-02 0200 0000 00DD 7D0-02-03 0000 DC 7D0-03-01 2055 5203 00A5 7D0-04-01 0103 0201 00E3 7D0-04-02 0101 DF Instrument Panel Control Module IPC 720-01-01 2C0B 1064 6034 IPC 720-01-02 2013 106D IPC 720-02-01 4DC0 3C31 3CE0 IPC 720-02-02 1000 A9E4 IPC 720-03-01 2805 5400 00AC IPC 720-03-02 C848 013D IPC 720-04-01 C441 0000 0031 IPC 720-04-02 5553 00D5 IPC 720-05-01 0000 0000 002D IPC 720-05-02 0000 113F IPC 720-06-01 0000 0000 002E IPC 720-06-02 0000 002F IPC 720-07-01 8401 88A0 603C IPC 720-07-02 0000 0030 Audio Control Module ACM 727-01-01 1801 1808 0069 ACM 727-01-02 0600 37 ACM 727-02-01 5B8C ACM 727-03-01 1446 ACM 727-04-01 0001 0155 53DD
2) Software Installation ReportCode:<NODEID> 7D0 <F110>DS-ET4T-14D212-AB</F110> <F111>ES7T-14F130-BA</F111> <F113>ES7T-14D212-DA</F113> <F188>EM5T-14D205-AD</F188> </NODEID>
this comes from the usb stick that you used to do your last update.
or you may put the SYNCStatusChecker.zip on a usb stick, put it in your car, turn on key, it will install the report on your usb stick.
look in the syncmyride folder for xml file that is in the format Sync_<esn>_<vin>.xml
this file contains all the information you should need to do the software download!
below is an excerpt from this software report.
<VIN> <ESN> <HardwareFordPartNumber> <ImageFPN> <VMCUFordPartNumber> <FPN> (2nd application is for nav in this case)
3) Alternatively you can get most of this same information from the diagnostic screen.Code:<Vehicle> <VIN>1FTEW1EG2FFA47262</VIN> <DisplayType>0A</DisplayType> <ModuleHW> <ESN>YAABBCCD</ESN> <MACAddress>001122334455</MACAddress> <WIFIMACAddress>0011223344</WIFIMACAddress> <HardwareFordPartNumber>ES7T-14F130-BA</HardwareFordPartNumber> <CCPU> <ImageFPN>EA5T-14D544-AD</ImageFPN> <Version>6.0.15065.0.0</Version> <OEMVersion>3.08.15128.EA.10_PRODUCT </OEMVersion> <Applications> <Application> <GUID>{00000000-0000-0000-0000-000000000000}</GUID> <FPN>EA5T-14F496-AD</FPN> <Version>0.0.0.0</Version> <Name>EA5T-14F496-AD</Name> </Application> <Application> <GUID>{00000000-0000-0000-0000-000000000000}</GUID> <FPN>EA5T-14F657-AD</FPN> <Version>0.0.0.0</Version> <Name>EA5T-14F657-AD</Name> </Application> ... <VMCU> <VMCUFordPartNumber>EM5T-14D205-AD</VMCUFordPartNumber> <Version>Vector_VMCU_02.04.31</Version> </VMCU>
Radio off, key on, eject button hold, still holding eject hold the right (next ) button.
Cancel tone test
Goto APIM Diagnostic/Part Numbers
Find on screen -
APIM Serial Number: <ESN>
H/W Part Number: <HardwareFordPartNumber>
CCPU S/W Part Number: <ImageFPN>
VMCU S/W Part Number : <VMCUFordPartNumber>
This would leave you to guess your particular NAV pack. <FPN>, usually EA5T-14F657-AD for north america.
You can use all of this data above, from your vehicle, map it to line 7 of excel, it will generate the url on line 8 for you.
Download the software, confirm that you have BT4T-14D546-EE in the zip, this is the NAV software license.
Unzip to USB stick, let this install run just like any normal sync update.
After update you should be able to go to Settings/System/Install Applications/View Software License and see the nav license on your MFT.
APIM Programming
You will need to download Forscan software.
You will need a good OBDII Forscan compatible OBDII interface.
Old Real Elm327s with MSCAN/HSCAN switch, or other good interfaces, not the cheap $5 elms on ebay 99.9% will not work.
Consult Forscan site for more on compatible interfaces.
Connect Interface and Forscan, let it scan modules.
Configuration Programming select APIM as build.
The important thing to set is one bit at 7D0-01-02 00 needs to be 7D0-01-02 04 in all cases we have seen so far.
7D0-01-02 0009 0604 806D No Nav
7D0-01-02 0409 0604 8071 Nav
The checksum (last byte), is the sum of all other bytes on that line
Checksum for this can be simple, just add 04 hex, so 6D + 04 = 71. See post #7 for good explaination on checksum.
Your numbers will be different for your vehicle.
The 1st byte 00/04 and the last checksum are all that need be changed.
Forscan may or may not calculate this checksum dynamically, i don't remember.
After doing this the MFT will reboot.
At which time, you should have nav.
You will need an SD map card (A7 is current) in the vehicle to use NAV. Go buy one, so that Here maps gets paid.
Please do not post the url in this thread. Build and download your own.
Attached a simplified excel with clearer header with entries attached.
Edit:
Climate in lower right quadrant can also be enabled. Post #699Vinc, your 3.08 Navigation Update file is old and 3.10 is incomplete. Use the following AF / AG Navigation Update as future reference:
https://mega.nz/#!xtQBCRhY!g4x3KVBFncz0MGraP0i_dNP6uS-M3s4RhTv85JsjozA
These versions will not require a MFT master reset after NaviPatch.png
Plus, here's the full 3.10.16180 European revised update (EU-Lang pack3 EN-GB_DE-DE_FR-FR_IT-IT) as I got tired of all the trouble versions floating around:
https://mega.nz/#!M1Jh1LhD!KnpCrzB-xY1FHw2bdvmg0KFNGzwzUm9aGC8ngu0_m4A
Possible 3.10 EU language packs are:
1. EULangpack1 DE-DE_EN-GB_RU-RU_TR-TR http://ivsu.binaries.ford.com/swparts/EA5T-14F497-BF_64703.ZIP
2. EULangpack2 DE-DE_EN-GB_PL-PL_RU-RU http://ivsu.binaries.ford.com/swparts/EA5T-14F497-CF_64704.ZIP
3. EULangpack3 DE-DE_EN-GB_FR-FR_IT-IT http://ivsu.binaries.ford.com/swparts/EA5T-14F497-DF_64705.ZIP
4. EULangpack4 DE-DE_EN-GB_FR-FR_SV-SE http://ivsu.binaries.ford.com/swparts/EA5T-14F497-EF_64706.ZIP
5. EULangpack5 EN-GB_ES-ES_FR-FR_PT-PT http://ivsu.binaries.ford.com/swparts/EA5T-14F497-FF_64707.ZIP
6. EULangpack6 DE-DE_EN-GB_FR-FR_NL-NL http://ivsu.binaries.ford.com/swparts/EA5T-14F497-GF_64708.ZIP
by replacing the EA5T-14F497-xF file inside SyncMyRide folder and inside autoinstall.lst
And here is the full 3.10.16180 US revised update (NA-Lang pack EN-US_FR-CA_ES-US for Ford/Lincoln, VHR discontinued and removed)
https://mega.nz/#!Jk4hzSZD!NNOw8g9BkciF4GREYnzCL3i5gokxCemgAzykCi47NMw
Possible 3.10 US language packs are:
1. South America EN-US_PT-US_ES-US http://ivsu.binaries.ford.com/swparts/EA5T-14F497-HE_64709.ZIP
2. Australia EN-AU http://ivsu.binaries.ford.com/swparts/EA5T-14F497-LF_64711.ZIP
by replacing the EA5T-14F497-xE file inside SyncMyRide folder and inside autoinstall.lst
Ignore the final 3.8 confirmation prompt, it's 3.10. In case anyone wants a different splashscreen, it can be installed easily by modifying autoinstall.lst in the following installation:
https://mega.nz/#!V44iWKBC!Gflsjkh4gVsz5vFIlPL8_g7r1JmrqSx6Nxp-H3k3tg0
EA5T-14F496-MA - Custom Animation application (FOR FORD F-150 RAPTOR).
EA5T-14F496-PA - Custom Animation application (FOR MUSTANG).
EA5T-14F496-RA - Custom Animation application (FOR LINCOLN BLACK LABEL).
EA5T-14F496-SA - Custom Animation application (FOR LINCOLN PRESIDENTIAL).
EA5T-14F496-TB - Custom Animation application (FOR FORD MONDEO VIGNALE).
EA5T-14F496-UA - Custom animation application (FOR EU MARKET FORD VEHICLES).8Sync2 USB update package to 3.10 (16180) version for North America.
Standard Ford splash screen (not Lincoln, Vignale or Mustang...).
Checked. Seems to work.
Made on the original packages, so comments on the functioning should be addressed directly to Ford.
Please disregard the information on the screen that it is the 3.08 update. Ford didn't do messages about 3.10 update , so I used those messages from 3.08 that everything was as it should be.
https://1drv.ms/u/s!Ales_ZTMf8IEhORa6Fk_xiVLe3kSEg
Important note - the contents of the package for real navi license for versions 15128 and 16180 is different.
If someone will want to order real navi license from me, must clearly indicate to which version license to be generated.
