Last edited:
The VoIP doesn't seem to work. I tried the stock stack and Fongo. On connecting a call the I can hear the other side, but my voice is muffled/crackly and very very quiet. If I switch to the external speaker everything works but switching back causes the same problem. To me it seems like a sound routing problem.
I had the same problem.
You need change those parametrs at build.prop:
use.dedicated.device.for.voip=true.
use.voice.path.for.pcm.voip=true.
change those parameters to "false"
At CianogenMod12.1(at this firmware Voip work fine), this parametrs are missing, maybe need simply deleting at Lineage 14.1. Today I use my smartphone whith those changes, problem resolved.
What recovery you used?I had the same problem.
You need change those parametrs at build.prop:
use.dedicated.device.for.voip=true.
use.voice.path.for.pcm.voip=true.
change those parameters to "false"
At CianogenMod12.1(at this firmware Voip work fine), this parametrs are missing, maybe need simply deleting at Lineage 14.1. Today I use my smartphone whith those changes, problem resolved.
does not work on atrix hd. touch doesnt work.Here is a test version of lineage14.1 unnoficial and TWRP 3.1.1-0 for the Atrix HD. It as only been tested on a Razr M. I do not have enough posts to make a new thread so I'm adding it here.
I am not responsible for bricked devices, loss of data, dead SD cards,
* loss of hair, thermonuclear war, or you getting fired because the alarm app
* failed. Please do some research if you have any concerns about features included
* in this ROM before flashing it! YOU are choosing to make these modifications, and
* if you point the finger at us for messing up your device, everyone will laugh at
* you and I will deny any wrong doing or responsibility.
Procedure
NB: You must format your Data and Cache partitions as F2FS
Download the latest PICO or NANO GApps from OpenGapps
Backup your internal SD Card, off of the device eg USD or Hard Disk
Boot to TWRP
Make a nandroid backup, and ensure this backup is not on the device itself
Format your data partition and cache partition to F2FS (do NOT post for instructions on how
to do this on this thread!)
Wipe Cache , System & Dalvik-Cache
Flash the ROM Zip
Flash Gapps ARM -> 7.1
Wipe cache and dalvic
Done - Reboot to [System]
Wait...
Rom: https://www.androidfilehost.com/?fid=4349826312261715411
MD5 sum: https://www.androidfilehost.com/?fid=4349826312261715412
Recovery: https://www.androidfilehost.com/?fid=4349826312261715413
All work is done here: https://github.com/Wheels564
Screenshot https://www.androidfilehost.com/?fid=4349826312261715435
does not work on atrix hd. touch doesnt work.
---------- Post added at 11:35 PM ---------- Previous post was at 11:32 PM ----------
on other roms that i have flashed that required to format to f2fs i successfully flashed with 6059 philz f2fs recovery without changing that options.. wouldnt your rom flash on that recovery as well?
Yeah. Got status 7 using philz f2fs recoveryI'll see if I can build one with the old touch driver. Touch worked fine on the Razr M both in recovery and rom. My Razr HD had the old touch driver but works fine with the new one.
The old Philz recovery probably won't support android 7.1. I'll see what I can do with it when I get time.
I try to change it in the phone options and in the engineer menu *#*#4636#*#* but cellular type dont change. I found some similar issues on this forum with CM13. As I understand, they are not fixed. I used before CM11 and change cellular type withou problems. Have you tried the last LOS 13 yet?
ehh...