The popularity of Nexus devices has increased significantly since the launch of the Nexus One in January 2010. Along with this popularity, forums such as xda-developers have also had an influx of new users, most of which are not developers, and are not well versed in the intricacies of Android.
After much thought (and some discussion on this thread), I’ve decided to create this thread as a compilation of FAQs, 101s, and “How-To’s” in the hopes that those coming to Android who want to learn will have another resource to help them learn. With that in mind, this thread is NOT meant to explain the quickest way to do things (you will NOT see toolkits or shortcuts discussed in this thread), nor is it meant to be a “fix-my-device” thread. It is created with for a purpose of learning, in order to expand users’ knowledge of Nexus devices and Android in general. See this post by kyphur for the general philosophy of this site, which I share.
I do not take myself to be an Android guru or developer. However, I do have a bit of knowledge to share. If you think things are missing or not accurate, I will be more than happy to add or revise anything. I will try to cover most of the basic topics related to Android, including drivers, ADB, fastboot, partitions, recoveries, bootloaders, root and reverting to stock. Again, I will not discuss toolkits, nor will I cover custom ROMs. Those have their own threads.
This will be an ongoing work-in-progress, as it takes considerable time to try and capture everything properly, and my time is limited. The order of the information will also change, as I haven't quite figured out the best way to present everything. (Currently there are some FAQs, including fastboot and ADB commands, followed by a list of reference and how-to threads.)
So, without further delay:
Frequently Asked Questions
What is Android?
Android is an open-source operating system for mobile devices. It is basically a java virtual machine running on a Linux-based kernel.
What is the Android SDK and do I need it?
SDK stands for "software development kit. Do you need it? If you are developing, then yes (but then you probably would be reading this thread now would you... ). If you are not developing, then no, you do NOT need to install it. It is just a waste of space. The only files you need (to interface with your PC) that comes from the SDK are the fastboot and adb files, and they can be found here for Windows, Linux, and MacOS.
Why do I need a driver for my Windows PC to recognize my device?
As with all hardware, Windows requires device drivers for it to be able to interface with the OS. Drivers are not required if you are using Linux or MacOS.
Where do I get the driver for my PC?
For the Nexus 4, the driver available in the SDK works. (You can get just the driver without the SDK from here.) However, I recommend using this package by 1wayjonny. It works perfectly and, unlike most other packages, 1wayjonny’s repack does not install any crapware along with it. That said, it doesn’t include an .exe file, so it needs to be installed manually from the .inf file. If you do not now how to do that, see here for instructions. Note: If you are using Windows 8, you will need to do this before you can install the driver.
Why do I need to install the driver twice?
Nexus devices use two main interfaces (there are actually a few more, but I will cover them later) to communicate with a PC. These are ADB (Android debug bridge) and fastboot, both of which will be covered later. The fastboot interface requires the N4 to be booted in fastboot (i.e., bootloader) mode. Thus, in order to install the fastboot driver, you need to boot your N4 into the bootloader. The ADB interface requires an Android kernel to be booted, i.e., your device needs to be booted normally, or in a custom recovery (covered later). Additionally, if your device is booted normally, you need to have USB Debugging set to enabled in settings (i.e., Settings->Developer options->USB debugging).
How do I boot my device into the bootloader (i.e., fastboot mode)?
Turn off your device, hold volume down, and press and hold the power button.
What is a command prompt?
A command prompt in Windows (or terminal in Linux/MacOS) is a command line window in which you can enter commands. To open a command prompt in Windows, you can hold the shift key and right click in the directory in which you want your command prompt open. Or, in a Windows Explorer window you can go to File-><name-of-window>->Open command window here.
What is a bootloader?
Without getting into too many technicalities, the bootloader is essentially the program that gets loaded first when starting your device, and it is responsible for booting the Android kernel. Think of the bootloader as the BIOS of a computer.
What does it mean if my bootloader is locked/unlocked?
Most (if not all) devices are shipped from the manufacturer with locked bootloaders. This is for security reasons. A locked bootloader does not allow easy flashing of images, which means that it is difficult to change or modify the operating system. Unlocking a bootloader (using fastboot) on most Nexus devices results in a complete loss of all personal data from the device. Having a locked or unlocked bootloader has no bearing on the functioning of the device. Unlocking it gives you more options to play around with the OS. Additionally, an unlocked bootloader means that you can easily root your device no matter what -- unlike most non-Nexus devices, if you lose root, it is trivial to get it back.
What is “root”?
Root essentially means that you have root (or superuser) access to the file system on Android. It is similar to being “administrator” on a Windows PC. It has nothing to do with your device or the bootloader, it has to do with the Android OS (i.e., you cannot “root” your device – you root the Andoid build that you are running). To have root, you need to be booted into the Android OS that you have rooted. If you are in fastboot mode, root is irrelevant.
How do I get “root”?
If you are booted into a custom recovery (recoveries will be covered later), root is enabled by default. If you want root while booted into Android, you will need to place two files on your system partition: an “su” binary which grants root access, and a superuser app that manages that access. The two that are available are ChainsDD’s Superuser and Chainfire’s SuperSU. Usually these files are packaged up in a zip file that is flashable using a custom recovery, but they can be flashed manually using ADB. Both of these methods will be described below.
If I unlock my bootloader, is that the same as root?
No, as was mentioned above, unlocking the bootloader allows you to (among a few other things) flash images easily to the device when not booted into the Android OS. Root allows you access to manipulate the files WITHIN the Android OS.
If I unlock my bootloader, does that mean that I have to root?
No.
If I unlock my bootloader, do I have to flash a custom ROM?
No.
Do I need to root to flash a ROM?
No.
What is a ROM?
A ROM is slang for an mobile OS build.
What are the different versions of Android, and is there a difference between say 4.2 and JOP40C?
Have a look at this link for an explanation of what (for example) JOP40C means, and what version of Android that is.
What is the difference between a stock ROM and a custom ROM?
A stock ROM is a ROM that is built by Google and is signed by Google’s platform keys. Everything else is a custom ROM.
What is this AOSP I keep hearing about?
AOSP stands for Android Open Source Project, and is a repository for the source code for Android. You can build your own ROM from AOSP. Details can be found on http://source.android.com/.
What is fastboot?
Fastboot can refer to three things: the actual interface between your PC and phone; the fastboot.exe file; or the “mode” of your device. For you to be able to use fastboot commands: your device has to be booted in fastboot mode, the fastboot driver for your PC needs to be installed, and the fastboot.exe file needs to be on your PC.
What are the fastboot commands?
The list of fastboot commands can be seen by typing “fastboot” (without the quotes) in a command prompt opened in the directory where you fastboot.exe file is located. See below.
Along with these commands, there is an additional one: oem. For now, I will only cover the following commands: devices, flash, boot, erase, reboot, reboot-bootloader and oem.
These commands will work in fastboot mode, whether your bootloader is lock or unlocked:
oem: with a shipping bootloader (like what most of us have on our devices) there are two “oem” commands: “oem unlock” and “oem lock”. These commands are used to unlock and lock your bootloader, e.g., “fastboot oem unlock” will unlock your bootloader.
devices: this command checks to see if your device is properly connected to your PC in fastboot mode, e.g., “fastboot devices”
reboot: this command will reboot your device, e.g., “fastboot reboot”
reboot-bootloader: this command will reboot your device into fastboot mode, e.g., “fastboot reboot-bootloader”
These commands will only work in fastboot mode IFF your bootloader is unlocked:
flash: this command is used to flash images to partitions (partitions will be covered later) on your device. It cannot be used to “flash” individual files or .zips. For example, to flash the system partition, the command would be “fastboot flash system system.img”
boot: this command boots a kernel without flashing it to your device. For example, to boot an insecure kernel called “test.img”, the command would be “fastboot boot test.img”
erase: this command erases a specified partition. For example, to erase the cache partition, the command would be “fastboot erase cache”
The above mentioned commands are the basics for flashing your device. You should get familiar with them.
What is ADB?
ADB can refer to two things: the actual interface between your PC and phone, or the adb files (the .exe and two .dll files for Windows). For you to be able to use adb commands: the adb driver needs to be installed on your PC, the adb files need to be on your PC, and your device has to be booted either in recovery mode or booted normally into Android. Additionally, USB debugging needs to be enabled if booted into Android.
What are the ADB commands?
The list of ADB commands can be seen by typing “adb” (without the quotes) in a command prompt opened in the directory where your adb.exe file is located. See below.
copkay has written up a great guide on the use of the “backup” and “restore” commands in this thread, so I will not cover those commands here.
For now, I will only cover the following commands: devices, reboot, reboot bootloader, push, pull and shell.
devices: this command checks to see if your device is properly connected to your PC in ADB mode, e.g., “adb devices”
reboot: this command will reboot your device, e.g., “adb reboot”
reboot-bootloader: this command will reboot your device into fastboot mode, e.g., “adb reboot bootloader”
push: this command copies a file (or directory) to your device from your PC. For example, say you wanted to copy to your /sdcard folder on your device a file called junk.jpg, which is stored on your PC in c:\. The command would be “adb push c:\junk.jpg /sdcard/” (assuming the folder is mounted – to be covered later). Petrovski80 has added more details on copying files to your device in his thread here.
pull: this command copies a file (or directory) to your PC from your device. For example, say you wanted to copy to your c:\ directory on your PC a file called junk.jpg, which is stored in the /sdcard folder on your device. The command would be “adb pull /sdcard/junk.jpg c:\” (assuming the folder is mounted – to be covered later).
shell: this command opens a “shell” to your device so you can issue commands directly to the Android OS. The command is “adb shell”. Your prompt will change to “$” which means that you are now issuing commands to Android, not to your PC. (At some point, I will try to put together a list of commonly used commands, but for anyone that has used Linux, they are essentially the same.)
What are the partitions on a the N4?
A Nexus 4 has the following partitions:
modem -> /dev/block/mmcblk0p1
sbl1 -> /dev/block/mmcblk0p2
sbl2 -> /dev/block/mmcblk0p3
sbl3 -> /dev/block/mmcblk0p4
tz -> /dev/block/mmcblk0p5
boot -> /dev/block/mmcblk0p6
recovery -> /dev/block/mmcblk0p7
m9kefs1 -> /dev/block/mmcblk0p8
m9kefs2 -> /dev/block/mmcblk0p9
m9kefs3 -> /dev/block/mmcblk0p10
rpm -> /dev/block/mmcblk0p11
aboot -> /dev/block/mmcblk0p12
sbl2b -> /dev/block/mmcblk0p13
sbl3b -> /dev/block/mmcblk0p14
abootb -> /dev/block/mmcblk0p15
rpmb -> /dev/block/mmcblk0p16
tzb -> /dev/block/mmcblk0p17
metadata -> /dev/block/mmcblk0p18
misc -> /dev/block/mmcblk0p19
persist -> /dev/block/mmcblk0p20
system -> /dev/block/mmcblk0p21
cache -> /dev/block/mmcblk0p22
userdata -> /dev/block/mmcblk0p23
DDR -> /dev/block/mmcblk0p24
grow -> /dev/block/mmcblk0p25
Source here.
What does mounting mean?
In order for a device to have access to files, the partition on which those files reside needs to be “mounted”. If you are in recovery, you can easily do this by going to the mounts menu and mounting the appropriate partition. If you are booted in Android, you will need to mount the partition yourself. The /sdcard folder is already mounted by default, however.
How do I mount the system partition?
In recovery: go to the mount menu and mount /system
In Android, on your device: you need root, and a file explorer with root access
In Android, connected via ADB (root required): you need to type the following command in a command prompt:
adb shell
su
mount -o remount,rw -t ext4 /dev/block/mmcblk0p21 /system
To explain this a bit:
-o remount,rw <== this remounts a partition that is already mounted (as read-only), as read-write
-t ext4 <== this specifies to mount it as ext4
/dev/block/mmcblk0p21 <== this is the system partition
/system <== this is what you are mounting it as
What is recovery?
Recovery is like a mini OS, which allows you to perform various functions, usually related to flashing files to your device, or updating files, or backing things up, etc. The stock image has a recovery included, but its functionality is very limited. There are a number of custom recoveries available, but the two most popular for the Nexus 4 are CWM and TWRP. There are various versions of each. More details to come in this section.
I see an Android lying on its back when I boot into recovery. Why?
What you see is the main screen of the Nexus stock recovery. To access the menu, you need to push and hold power and press volume up.
I just flashed CWM, but every time I try to boot into CWM, I keep seeing the stock recovery. Why?
If you updated your Android build using an OTA update file (either manually or over-the-air), the update placed two files on your device that re-flash the stock recovery every time you reboot your device. These two files are:
/system/etc/install-recovery.sh <== this is the script that installs the patch file
/system/recovery-from-boot.p <== this is the patch
You have to rename (or delete) one or both of them, then re-flash your custom recovery. Now it will stick.
What is an insecure boot image?
An insecure boot image is one that has root enabled for the shell user (i.e, ADB) by default on boot. This means that if you have booted or flashed an insecure image, when you connect your device to a computer, and open a shell via ADB, you will be userid 0 (or root) without having to "request" root access via the su binary. This makes somethings easier -- for example, you can now use the "remount" command in ADB to mount /system without having to type the full mount command in a shell. (More to add later.)
How do I root?
As was mentioned earlier, you need to place the su binary and the superuser app into the right spots on your device. In order to do this, you need to already have root access. There are two ways: flash a root package in recovery (instructions here), or manually place the files in the appropriate spots (I will add instructions on how to do this at a later time).
After much thought (and some discussion on this thread), I’ve decided to create this thread as a compilation of FAQs, 101s, and “How-To’s” in the hopes that those coming to Android who want to learn will have another resource to help them learn. With that in mind, this thread is NOT meant to explain the quickest way to do things (you will NOT see toolkits or shortcuts discussed in this thread), nor is it meant to be a “fix-my-device” thread. It is created with for a purpose of learning, in order to expand users’ knowledge of Nexus devices and Android in general. See this post by kyphur for the general philosophy of this site, which I share.
I do not take myself to be an Android guru or developer. However, I do have a bit of knowledge to share. If you think things are missing or not accurate, I will be more than happy to add or revise anything. I will try to cover most of the basic topics related to Android, including drivers, ADB, fastboot, partitions, recoveries, bootloaders, root and reverting to stock. Again, I will not discuss toolkits, nor will I cover custom ROMs. Those have their own threads.
This will be an ongoing work-in-progress, as it takes considerable time to try and capture everything properly, and my time is limited. The order of the information will also change, as I haven't quite figured out the best way to present everything. (Currently there are some FAQs, including fastboot and ADB commands, followed by a list of reference and how-to threads.)
So, without further delay:
Frequently Asked Questions
What is Android?
Android is an open-source operating system for mobile devices. It is basically a java virtual machine running on a Linux-based kernel.
What is the Android SDK and do I need it?
SDK stands for "software development kit. Do you need it? If you are developing, then yes (but then you probably would be reading this thread now would you... ). If you are not developing, then no, you do NOT need to install it. It is just a waste of space. The only files you need (to interface with your PC) that comes from the SDK are the fastboot and adb files, and they can be found here for Windows, Linux, and MacOS.
Why do I need a driver for my Windows PC to recognize my device?
As with all hardware, Windows requires device drivers for it to be able to interface with the OS. Drivers are not required if you are using Linux or MacOS.
Where do I get the driver for my PC?
For the Nexus 4, the driver available in the SDK works. (You can get just the driver without the SDK from here.) However, I recommend using this package by 1wayjonny. It works perfectly and, unlike most other packages, 1wayjonny’s repack does not install any crapware along with it. That said, it doesn’t include an .exe file, so it needs to be installed manually from the .inf file. If you do not now how to do that, see here for instructions. Note: If you are using Windows 8, you will need to do this before you can install the driver.
Why do I need to install the driver twice?
Nexus devices use two main interfaces (there are actually a few more, but I will cover them later) to communicate with a PC. These are ADB (Android debug bridge) and fastboot, both of which will be covered later. The fastboot interface requires the N4 to be booted in fastboot (i.e., bootloader) mode. Thus, in order to install the fastboot driver, you need to boot your N4 into the bootloader. The ADB interface requires an Android kernel to be booted, i.e., your device needs to be booted normally, or in a custom recovery (covered later). Additionally, if your device is booted normally, you need to have USB Debugging set to enabled in settings (i.e., Settings->Developer options->USB debugging).
How do I boot my device into the bootloader (i.e., fastboot mode)?
Turn off your device, hold volume down, and press and hold the power button.
What is a command prompt?
A command prompt in Windows (or terminal in Linux/MacOS) is a command line window in which you can enter commands. To open a command prompt in Windows, you can hold the shift key and right click in the directory in which you want your command prompt open. Or, in a Windows Explorer window you can go to File-><name-of-window>->Open command window here.
What is a bootloader?
Without getting into too many technicalities, the bootloader is essentially the program that gets loaded first when starting your device, and it is responsible for booting the Android kernel. Think of the bootloader as the BIOS of a computer.
What does it mean if my bootloader is locked/unlocked?
Most (if not all) devices are shipped from the manufacturer with locked bootloaders. This is for security reasons. A locked bootloader does not allow easy flashing of images, which means that it is difficult to change or modify the operating system. Unlocking a bootloader (using fastboot) on most Nexus devices results in a complete loss of all personal data from the device. Having a locked or unlocked bootloader has no bearing on the functioning of the device. Unlocking it gives you more options to play around with the OS. Additionally, an unlocked bootloader means that you can easily root your device no matter what -- unlike most non-Nexus devices, if you lose root, it is trivial to get it back.
What is “root”?
Root essentially means that you have root (or superuser) access to the file system on Android. It is similar to being “administrator” on a Windows PC. It has nothing to do with your device or the bootloader, it has to do with the Android OS (i.e., you cannot “root” your device – you root the Andoid build that you are running). To have root, you need to be booted into the Android OS that you have rooted. If you are in fastboot mode, root is irrelevant.
How do I get “root”?
If you are booted into a custom recovery (recoveries will be covered later), root is enabled by default. If you want root while booted into Android, you will need to place two files on your system partition: an “su” binary which grants root access, and a superuser app that manages that access. The two that are available are ChainsDD’s Superuser and Chainfire’s SuperSU. Usually these files are packaged up in a zip file that is flashable using a custom recovery, but they can be flashed manually using ADB. Both of these methods will be described below.
If I unlock my bootloader, is that the same as root?
No, as was mentioned above, unlocking the bootloader allows you to (among a few other things) flash images easily to the device when not booted into the Android OS. Root allows you access to manipulate the files WITHIN the Android OS.
If I unlock my bootloader, does that mean that I have to root?
No.
If I unlock my bootloader, do I have to flash a custom ROM?
No.
Do I need to root to flash a ROM?
No.
What is a ROM?
A ROM is slang for an mobile OS build.
What are the different versions of Android, and is there a difference between say 4.2 and JOP40C?
Have a look at this link for an explanation of what (for example) JOP40C means, and what version of Android that is.
What is the difference between a stock ROM and a custom ROM?
A stock ROM is a ROM that is built by Google and is signed by Google’s platform keys. Everything else is a custom ROM.
What is this AOSP I keep hearing about?
AOSP stands for Android Open Source Project, and is a repository for the source code for Android. You can build your own ROM from AOSP. Details can be found on http://source.android.com/.
What is fastboot?
Fastboot can refer to three things: the actual interface between your PC and phone; the fastboot.exe file; or the “mode” of your device. For you to be able to use fastboot commands: your device has to be booted in fastboot mode, the fastboot driver for your PC needs to be installed, and the fastboot.exe file needs to be on your PC.
What are the fastboot commands?
The list of fastboot commands can be seen by typing “fastboot” (without the quotes) in a command prompt opened in the directory where you fastboot.exe file is located. See below.
Code:
fastboot
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
format <partition> format a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address
-n <page size> specify the nand page size. default: 2048
These commands will work in fastboot mode, whether your bootloader is lock or unlocked:
oem: with a shipping bootloader (like what most of us have on our devices) there are two “oem” commands: “oem unlock” and “oem lock”. These commands are used to unlock and lock your bootloader, e.g., “fastboot oem unlock” will unlock your bootloader.
devices: this command checks to see if your device is properly connected to your PC in fastboot mode, e.g., “fastboot devices”
reboot: this command will reboot your device, e.g., “fastboot reboot”
reboot-bootloader: this command will reboot your device into fastboot mode, e.g., “fastboot reboot-bootloader”
These commands will only work in fastboot mode IFF your bootloader is unlocked:
flash: this command is used to flash images to partitions (partitions will be covered later) on your device. It cannot be used to “flash” individual files or .zips. For example, to flash the system partition, the command would be “fastboot flash system system.img”
boot: this command boots a kernel without flashing it to your device. For example, to boot an insecure kernel called “test.img”, the command would be “fastboot boot test.img”
erase: this command erases a specified partition. For example, to erase the cache partition, the command would be “fastboot erase cache”
The above mentioned commands are the basics for flashing your device. You should get familiar with them.
What is ADB?
ADB can refer to two things: the actual interface between your PC and phone, or the adb files (the .exe and two .dll files for Windows). For you to be able to use adb commands: the adb driver needs to be installed on your PC, the adb files need to be on your PC, and your device has to be booted either in recovery mode or booted normally into Android. Additionally, USB debugging needs to be enabled if booted into Android.
What are the ADB commands?
The list of ADB commands can be seen by typing “adb” (without the quotes) in a command prompt opened in the directory where your adb.exe file is located. See below.
Code:
Android Debug Bridge version 1.0.29
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] <file> - push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
For now, I will only cover the following commands: devices, reboot, reboot bootloader, push, pull and shell.
devices: this command checks to see if your device is properly connected to your PC in ADB mode, e.g., “adb devices”
reboot: this command will reboot your device, e.g., “adb reboot”
reboot-bootloader: this command will reboot your device into fastboot mode, e.g., “adb reboot bootloader”
push: this command copies a file (or directory) to your device from your PC. For example, say you wanted to copy to your /sdcard folder on your device a file called junk.jpg, which is stored on your PC in c:\. The command would be “adb push c:\junk.jpg /sdcard/” (assuming the folder is mounted – to be covered later). Petrovski80 has added more details on copying files to your device in his thread here.
pull: this command copies a file (or directory) to your PC from your device. For example, say you wanted to copy to your c:\ directory on your PC a file called junk.jpg, which is stored in the /sdcard folder on your device. The command would be “adb pull /sdcard/junk.jpg c:\” (assuming the folder is mounted – to be covered later).
shell: this command opens a “shell” to your device so you can issue commands directly to the Android OS. The command is “adb shell”. Your prompt will change to “$” which means that you are now issuing commands to Android, not to your PC. (At some point, I will try to put together a list of commonly used commands, but for anyone that has used Linux, they are essentially the same.)
What are the partitions on a the N4?
A Nexus 4 has the following partitions:
modem -> /dev/block/mmcblk0p1
sbl1 -> /dev/block/mmcblk0p2
sbl2 -> /dev/block/mmcblk0p3
sbl3 -> /dev/block/mmcblk0p4
tz -> /dev/block/mmcblk0p5
boot -> /dev/block/mmcblk0p6
recovery -> /dev/block/mmcblk0p7
m9kefs1 -> /dev/block/mmcblk0p8
m9kefs2 -> /dev/block/mmcblk0p9
m9kefs3 -> /dev/block/mmcblk0p10
rpm -> /dev/block/mmcblk0p11
aboot -> /dev/block/mmcblk0p12
sbl2b -> /dev/block/mmcblk0p13
sbl3b -> /dev/block/mmcblk0p14
abootb -> /dev/block/mmcblk0p15
rpmb -> /dev/block/mmcblk0p16
tzb -> /dev/block/mmcblk0p17
metadata -> /dev/block/mmcblk0p18
misc -> /dev/block/mmcblk0p19
persist -> /dev/block/mmcblk0p20
system -> /dev/block/mmcblk0p21
cache -> /dev/block/mmcblk0p22
userdata -> /dev/block/mmcblk0p23
DDR -> /dev/block/mmcblk0p24
grow -> /dev/block/mmcblk0p25
Source here.
What does mounting mean?
In order for a device to have access to files, the partition on which those files reside needs to be “mounted”. If you are in recovery, you can easily do this by going to the mounts menu and mounting the appropriate partition. If you are booted in Android, you will need to mount the partition yourself. The /sdcard folder is already mounted by default, however.
How do I mount the system partition?
In recovery: go to the mount menu and mount /system
In Android, on your device: you need root, and a file explorer with root access
In Android, connected via ADB (root required): you need to type the following command in a command prompt:
adb shell
su
mount -o remount,rw -t ext4 /dev/block/mmcblk0p21 /system
To explain this a bit:
-o remount,rw <== this remounts a partition that is already mounted (as read-only), as read-write
-t ext4 <== this specifies to mount it as ext4
/dev/block/mmcblk0p21 <== this is the system partition
/system <== this is what you are mounting it as
What is recovery?
Recovery is like a mini OS, which allows you to perform various functions, usually related to flashing files to your device, or updating files, or backing things up, etc. The stock image has a recovery included, but its functionality is very limited. There are a number of custom recoveries available, but the two most popular for the Nexus 4 are CWM and TWRP. There are various versions of each. More details to come in this section.
I see an Android lying on its back when I boot into recovery. Why?
What you see is the main screen of the Nexus stock recovery. To access the menu, you need to push and hold power and press volume up.
I just flashed CWM, but every time I try to boot into CWM, I keep seeing the stock recovery. Why?
If you updated your Android build using an OTA update file (either manually or over-the-air), the update placed two files on your device that re-flash the stock recovery every time you reboot your device. These two files are:
/system/etc/install-recovery.sh <== this is the script that installs the patch file
/system/recovery-from-boot.p <== this is the patch
You have to rename (or delete) one or both of them, then re-flash your custom recovery. Now it will stick.
What is an insecure boot image?
An insecure boot image is one that has root enabled for the shell user (i.e, ADB) by default on boot. This means that if you have booted or flashed an insecure image, when you connect your device to a computer, and open a shell via ADB, you will be userid 0 (or root) without having to "request" root access via the su binary. This makes somethings easier -- for example, you can now use the "remount" command in ADB to mount /system without having to type the full mount command in a shell. (More to add later.)
How do I root?
As was mentioned earlier, you need to place the su binary and the superuser app into the right spots on your device. In order to do this, you need to already have root access. There are two ways: flash a root package in recovery (instructions here), or manually place the files in the appropriate spots (I will add instructions on how to do this at a later time).
Last edited: