[GT-I930x/T/N][SHV-E210*][SHW-M440S] CF-Auto-Root

Search This thread

vampyren

Senior Member
May 14, 2011
197
32
Re: [2012.12.04] CF-Auto-Root [GT-I930x/T/N][SHV-E210*][SHW-M440S]

Thanks for confirming.

Sent from my GT-I9305 using Tapatalk 2
 

NaabKing

Senior Member
Dec 2, 2010
685
95
@Chainfire
THANKS for you'r great work, i installed CF-Root just now, previous i had you'r CWM, now i'll just flash .zip files with Mobile ODIN.

If you would have iPhone, would you still wanna Root access and jailbreak it alone? xD
 

Ozeki

New member
Dec 16, 2005
3
0
HELP !

Please help me !!! I made a mistake and instead of CF-Auto-Root for gt-i9000 flashed CF-Auto-Root-t03g-t03gxx-gtn7100.tar for Note 2 !!!! Stupid mistake ((
Phone is working , OS booting normaly but screen is not respond my finger.
I did reboot , reflash CF-Auto-Root for gt-i9000 , try new stock ROM ... nothing helps (
Please tel me how can repear it ?
 

yinhaoliew

Member
Dec 16, 2010
21
0
Re: [2012.12.04] CF-Auto-Root [GT-I930x/T/N][SHV-E210*][SHW-M440S]

Please help me !!! I made a mistake and instead of CF-Auto-Root for gt-i9000 flashed CF-Auto-Root-t03g-t03gxx-gtn7100.tar for Note 2 !!!! Stupid mistake ((
Phone is working , OS booting normaly but screen is not respond my finger.
I did reboot , reflash CF-Auto-Root for gt-i9000 , try new stock ROM ... nothing helps (
Please tel me how can repear it ?

May be you can try flash the stock/official firmware using odin.

Sent from my GT-I9100G using xda app-developers app
 

polesp

Senior Member
Aug 1, 2010
106
12
Please help me !!! I made a mistake and instead of CF-Auto-Root for gt-i9000 flashed CF-Auto-Root-t03g-t03gxx-gtn7100.tar for Note 2 !!!! Stupid mistake ((
Phone is working , OS booting normaly but screen is not respond my finger.
I did reboot , reflash CF-Auto-Root for gt-i9000 , try new stock ROM ... nothing helps (
Please tel me how can repear it ?

Sorry but I bear bad news, watch this video the same happened here :S
http://www.youtube.com/watch?v=oMG-_26NgXM
 

FrancescoGato

Senior Member
May 24, 2012
52
5
R: [2012.12.04] CF-Auto-Root [GT-I930x/T/N][SHV-E210*][SHW-M440S]

Successfully flashed it via heimdall 1.3.1 on GT-i9300

Sent from my GT-I9300 using xda app-developers app
 

NaabKing

Senior Member
Dec 2, 2010
685
95
Since i installed Auto-Root and have stock recovery, which program do you guys suggest that i should make backup of the whole system with? So that i can try to install some things and then restore if something goes wrong? Before i could do that in CWM recovery.
 

FrancescoGato

Senior Member
May 24, 2012
52
5
Since i installed Auto-Root and have stock recovery, which program do you guys suggest that i should make backup of the whole system with? So that i can try to install some things and then restore if something goes wrong? Before i could do that in CWM recovery.
If you felt good with CWM then flash CWM again or another CWM based recovery (I use Phil Touch), if not, you could use TWRP or, if you don't want to backup via recovery, you could try this app https://play.google.com/store/apps/details?id=com.h3r3t1c.onnandbup or Titanium Backup.
Just my 2 cents.
 

JkJ76

New member
Feb 22, 2009
2
0
Landskrona
I flashed CF-Auto-Root-m0-m0xx-gti9300.tar.md5 via Odin and ran TriangleAway, still the counter stats 1...?

Any ideas to reset it?
 

pikul

Senior Member
Jul 1, 2009
298
49
Guatemala
Re: [2013.02.20] CF-Auto-Root [GT-I930x/T/N][SHV-E210*][SHW-M440S]

I updated to 4.1.2 today, can i flash this?

Sent from my GT-I9300 using Tapatalk 2
 

NaabKing

Senior Member
Dec 2, 2010
685
95
If i'm using this recovery, how should i flash the newest Sammy ROM (4.2.1), Mobile ODIN? Which option should i choose?

@Chainfire
Are you planing to do a program like "CWM Manager", with which we could do backup-s and restore of the Firmwares? (= Cuz if we have Stock Recovery (using CF-Auto Root) we cant do that, but i would really like to backup my system and try some things to flash (=
 

Top Liked Posts

  • There are no posts matching your filters.
  • 632
    Check your device model ! Settings -> About device -> Model number. See the third post for exact supported model numbers. If your device is a totally different model, it will not work (may even brick) !



    CF-Root is the root for "rooting beginners" and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root.

    Donate
    CF-Root has been available for many devices and has clocked over 8 million downloads. This is not even counting custom ROMs that already include it. Don't be a leech, buy me a beer (and use the "Thanks" button!). Imagine if every CF-Root user has donated me $1...

    What's installed
    - SuperSU binary and APK
    - Stock recovery

    Installation and usage
    Flash the CF-Auto-Root package as PDA in ODIN (details on how to do that are in next post), and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.

    If you don't get to the red Android logo, boot into recovery manually ("adb reboot recovery", or boot while holding Power+VolUp+Home).

    Using this root increases your flash counter. You should run Triangle Away (see below) after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

    Did you see the red Android logo during rooting, but SuperSU does not appear? This may sometimes occur due to left-over files and settings, however, you can usually install SuperSU from Google Play at this stage and it'll just work.

    Not included - Triangle Away
    Triangle Away can be used to reset the flash counter after installing CF-Root. The flash counter keeps track of how many custom firmwares you have flashed, as this voids warranty. (No idea what this about ? Read up on it, you will want to use this !)

    Not included - adbd Insecure
    As this CF-Root does not include a custom kernel, adb shell does not have root access by default (you can still get it by typing su inside the shell), nor is adb remount supported, nor will adb push and adb pull work on system files. adbd Insecure can be used to remedy this situation. (No idea what this is about ? Don't worry about it !)

    CF-Auto-Root homepage
    http://autoroot.chainfire.eu/

    CF-Auto-Root main thread
    [CENTRAL] CF-Auto-Root
    For requests for new roots and generic discussion - please keep device specific discussion in the thread you are viewing now.

    No CWM and such ?
    I have personally moved away from permanent custom recoveries, and I am no longer supporting them. On newer devices they cause flash counter and OTA flashing issues. If you really want one, others do provide versions of CWM and TWRP for most devices. Personally I just use Mobile ODIN to install ZIPs and Titanium Backup for my backup/restore needs. I do always want root though, and as such I'm still supporting CF-Auto-Root as quick way to root.
    309
    ODIN Installation (detailed)

    - Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
    - Unzip the attached Odin3-vX.X.zip file
    - Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
    - If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
    - (USB) Disconnect your phone from your computer
    - Start Odin3-vX.X.exe
    - Click the PDA button, and select CF-Auto-Root-....tar.md5
    - Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
    - (USB) Connect the phone to your computer
    - Make sure Repartition is NOT checked
    - Click the Start button
    - Wait for Android to boot
    - Done (if it took you more than 30 seconds, you need practise!)

    - NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process.

    New to Samsung? Unfamiliar with Odin? Think all the above is a hassle? Get used to it. It's very simple, and us Samsung folk use Odin (or Mobile ODIN ;)) for everything! It's so very very convenient once you get used to it. Notice the 30 second comment above? For experienced users, the entire process indeed takes only 30 seconds!

    You may now optionally want to install and run Triangle Away to reset the flash counter.
    266
    2013.05.20 --- CF-Auto-Root

    SuperSU: v1.30

    Download:

    GT-I9300: CF-Auto-Root-m0-m0xx-gti9300.zip
    GT-I9300T: CF-Auto-Root-m0-m0du-gti9300t.zip
    GT-I9305: CF-Auto-Root-m3-m3zh-gti9305.zip
    GT-I9305T: CF-Auto-Root-m3-m3dv-gti9305t.zip
    GT-I9305N: CF-Auto-Root-m3-m3swexx-gti9305n.zip

    SHV-E210K: CF-Auto-Root-c1ktt-c1ktt-shve210k.zip
    SHV-E210L: CF-Auto-Root-c1lgt-c1lgt-shve210l.zip
    SHV-E210S: CF-Auto-Root-c1skt-c1skt-shve210s.zip

    SHW-M440S: CF-Auto-Root-m0skt-m0skt-shwm440s.zip

    --- History ---

    2013.05.20: SuperSU v1.30
    2013.02.20: SuperSU v1.05
    2012.12.02: SuperSU v0.98
    2012.10.26: SuperSU v0.96
    29
    I've updated the I9300 download with the ELLC recovery.
    13
    All CF-Auto-Root's have been updated with SuperSU v1.05 today !