Try it from a fresh Windows. Do nothing for drivers. Just plug the phone in, wait for Windows update to find proper drivers and then just adb driver install from s1c.
Try it from a fresh Windows. Do nothing for drivers. Just plug the phone in, wait for Windows update to find proper drivers and then just adb driver install from s1c.
Last edited:
i tried that, and still not luck :S
BTW i tried manually way, but there is a part that says: Permition denied when i do this:
$ alcapwn (enter)
when i do that, it says permition denied and dont let me continue :S
---------- Post added at 11:17 PM ---------- Previous post was at 11:08 PM ----------
People!
I press ROOT and it stops on:
failed to symlink bug report > alcapwn
what is wrong??
You need to chmod it to 755 first, e.g. 'chmod 755 alcapwn'.
As many have succeeded in rooting via OneSuperClick, I recommend you use that method. Try running 'adb shell "rm /data/local/tmp/bugreport /data/local/tmp/alcapwn", that should remove any leftover files of an earlier attempt.
explain me better how i do that please, sorry im soo noob xD
i wrote that on Command and nothing.. it says not valid etc etc...
Last edited:
Last edited:
Guys, since we have a root and we're already talking about developing for ALCATEL One Touch 995, I think we should ask the admins to make a seperate section for our phone on the forum. Anyone knows how to do this?
I've asked them using the contact form on the Alcatel mobile site, and received the following reply:
Feel free to take your own stab at it..
not works
for me---------- Post added at 09:23 AM ---------- Previous post was at 09:17 AM ----------
it works!!!!!! first change DPI
second let me see .... try to recoveryI just posted '+1 for ALCATEL One Touch 995' on this topic: http://xdaforums.com/showthread.php?t=1660354
It would be nice if all OT-995 users could do this, so we might get a separate section
It would be nice if all OT-995 users could do this, so we might get a separate section
For what its worth, the Alcatel OT-995 is actually the TCL A998.
http://www.google.nl/search?hl=nl&q=tcl+a998&bav=on.2,or.r_gc.r_pw.r_qf.,cf.osb&biw=1366&bih=667&um=1&ie=UTF-8&tbm=isch&source=og&sa=N&tab=wi&ei=w7fDT8erGKKy0QX0irDCCg
Perhaps it helps in the search for new firmware, upgrades, source files, etc..
http://www.google.nl/search?hl=nl&q=tcl+a998&bav=on.2,or.r_gc.r_pw.r_qf.,cf.osb&biw=1366&bih=667&um=1&ie=UTF-8&tbm=isch&source=og&sa=N&tab=wi&ei=w7fDT8erGKKy0QX0irDCCg
Perhaps it helps in the search for new firmware, upgrades, source files, etc..
Last edited:
I always get "daemon not running. starting it now on port 5037" when I try to use superonclick. any ideas?
edit: problem solved
edit: problem solved
Last edited:
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
36So, here you go, an ICS backup flashable using CWM - works on any bootloader version.
1. Flash or boot CWM
2. Backup your existing firmware (important)
3. Download: CWM-flashable ICS FR
4. Store the alcatel_ics_fr directory on SD as /clockworkmod/backup/alcatel_ics_fr/
5. Use CWM's backup and restore -> restore -> alcatel_ics_fr to restore the image
6. Choose data/factory reset to clear your data partition
Edit: the old warning about WiFi nvram is not an issue.
Rooting hint: the zip also contains boot_root.img, boot it using fastboot (fastboot boot boot_root.img) to get an easy adb root shell.
Many thanks to Lymnoreia for the clean backup.201917After some silence, I'm here to give you something, guys. Jinxxed did it, again. A brand new build of CM-11.0, fresh from the oven, with his own kernel (version was stuck at 3.0.101 for some reason, but it is actually 3.5, contains updated drivers, no more outdated legacy stuff), reworked most of the stuff, etc.
Pretty good scores on Antutu (6321 on first try).
Download:
CM11 | Mirror
GApps | Mirror
Please note that this is still in Alpha, and a lot of changes will come in the future. If you find any bugs, please report!17H1N1 Reloaded ROM with Kernel V3 (for ICS/GB bootloader)
H1N1 ROM official topic - everywhere inside!
------------------------------------------------------------------------------
H1N1 Reloaded ROM & Kernel V3 released (with Aroma™ installer*)
*if you updated your phone to ICS with OTU, you have ICS bootloader, follow Aroma™ installer instructions
H1N1 Reloaded changelog:
- corrected symlinks inside boot.img
- added crt off animation
- fully deodexed & merged & optimized apks for the optimized speed & better stability
- removed bloatware stuff
- custpack is only functioning for storing gapps
- prerooted
Kernel V3 changelog:
- boot with stock 1,4GHz but able to up to 1,8GHz at your own risk!
- AXI/GPU OC removed because of battery/overheat problems
- voltage table revised/optimalisations (UV for more battery life)
- ArmV7 kernel optimalisations
- added zRam (continously 100-180MB free RAM)
- Audio buffer set to 64k instead default 16k (no more crackling)
- removed unnecessary kernel moduls (for debug)
- added governors: SmartassV2 / Smartass / interactiveX / Lagfree
- added new I/O schedulers: SIO / VR
- touch optimalisation (Smoothness...)
Installation instructions:
1., Download CWM recovery and ROM file from here: http://d-h.st/users/heimdallr75
2., Copy H1N1_reloaded_aroma.zip to SDcard
3.a, Reboot phone to CWM recovery (turn on phone in fastboot mode - power on+volume down + connect USB cable - then in command prompt run fastboot boot recovery_machfix-2012.06.09.img )
3.b, If you dont like push buttons, type to command prompt, simply download this package, extract it then connect USB cable to phone and run recovery.bat
4., MAKE BACKUP if needed.
5., run Wipe data/factory reset
6., under advanced run Wipe dalvik-cache
7., Install zip from sd card menu then select H1N1_reloaded_aroma.zip and follow instructions
No mirrors allowed, and please, post your build.prop mods/file delete lists instead more hipertweaked versions and everyone able to modify own system! All credits to bagyusz & Heimdallr75 & qltsar (from pH!). :highfive:
