[ROM][CM11][4.4.4][Port]Xperia Honami Material Themed ROM Samsung Galaxy Y GT-S5360

Is this ROM provides 100% SONY experience?

  • Yeah

    Votes: 31 83.8%
  • Nah

    Votes: 6 16.2%

  • Total voters
    37
  • Poll closed .
Search This thread

thedeadfish59

Senior Member
May 28, 2013
1,238
2,137
Saudi Arabia
web.facebook.com
OnePlus 6T
(Updated in 17-2-2016)[Port]Sony Xperia Material Themed ROM For Samsung Galaxy Y GT-S5360

Hey there totoro users, back with a new port! Presenting the pure xperia framework based ROM ported from Galaxy Ace 5830i ( Check Here and hit Thanks to him) , took CyanoGenmod 11 for totoro as base, so lags are expected, as devs didn't solve the issues of lag, so we cant expect this ROM as 100% lagfree or smooth, however, its a lot better than stock cm11, surf to know more! :eek: As its an initial build, bugs are expected as well, feel free to report!



Features:

-Sony Z5 bootlogo
-Sony Z5 bootanimation
-Sony Z3 lockscreen
-Sony Z3 media small app
-Sony Z3 dialer
-Sony Z3 contacts
-Sony Z3 Framework
-Sony Z3 Clock and clock widgets
-Sony Z3 SystemUI (Statusbar)
-Sony Z3 Sound enhancement
-Sony Z3 Small apps
-Sony Z3 Home launcher
-Sony Z3 Stock Themes
-Sony Z5 Music (Must Install update)
-Sony Z5 Video (Must Install update)
-Sony Z3 Conversations
-Sony Z3+ Wallpapers
-Sony Z3 Sounds
-Sony Z5 Keyboard
-Sony Z3 Calendar
-Sony Z3 Calculator
-Sony xLoud
-QuickPic renamed as Album
-ViPerFX
-Amaze File Manager
-Status Bar Tint
-Lollipop Easter Egg/Game
aaaand surf to know more! :D


Installation:

Same as CM11, Repeating it for newbies

1) Turn off your galaxy Y
2)After boot in the download mode by pressing the three button combination (volume down + home + power button)
3)Connect cable and open ODIN in PC
4)Press Volume UP then . Download Recovery from Here and flash it via ODIN (PDA Section)
5)then it will reboot at recovery, In recovery, , format everything in Mounts And Storage menu except sdcard, then go to install ZIP from SDcard, flash the ported ROM (See in download section)
6)Reboot and if everything goes fine, ROM will take 6mins or more to boot
7) Update your apps from here (Specially music, sketch, notes)
8)To Enable Lollipop features, Go to Xposed and install the framework then tick on all modules
then

Go to tinted status bar
-uncheck legacy gradient mode
-overly mode none
-default settings check link status bar colors
-check respect kitkat apis
exit

Then install App Settings and activate its module in Xposed
Find MonsterUI app from here
then Turn on
then Set DPI as 90
exit
reboot

Goto MonsterUI from Settings
Choose your material color in Primary Color (In my case I chose cyan color, as original xperia lollipop )
Just Any color you want
Reboot and you are done.



To disable Navigation Bar , go here >> link
About CyanogenMod:

Code:
* Your warranty is now void.
 * Me / CM / AndroidARMv6 Team are not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at any of us for messing up your device, we will laugh at you.
 * Collectively, and at the same time.


What's working What's not (lol BUGS):

Check this link for common cm11 issues

1)Cant edit/add widget buttons in Statusbar
2)(often)Rainbow color scatters in Dialer
3)Volume control FC


DONT ASK FOR UNUSUAL FC ISSSUES , those are cm11 bugs which can be solved if you flash stock and cm11 later


others, tell me :D[/SIZE]

Flashing gapps make cm11 slow as hell, its no RECOMMENDED to flash gapps then, but if ya want, flash
,sd-ext version of gapps, check madteam's website for that

Downloads:





Build [1.0] (Very initial stage):
Link

For Youtube:​
Use this one to watch videos from Youtube in HQ >> link

For TrackID:​



Scripts to Deal with lags (RECOMMENDED):


Broadcom Booster

Adrenaline Engine Script



Custom Kernel Pinuslang Nethunter to have better performance :

Link

Then choose min clock and max clock both as 832mhz, I/O scheduler as sio, Governor as PERFORMANCE to have the best performance , it will almost fix wake up delay bug, you will have to unlock developer options to get the option menu in settings, to do that go to Settings>About> tap on build number several times and Performance menu will appear on settings menu.


Credits:

-AllahSWT
-grain24 (For making it bootable in Ace 5830i, cheers! :D )
-raisul2010.5396 (Me :p For porting it for Galaxy Y )
-psyke83
-bielt.v
-spacecaker
-ViPER520 (For ViperFX sound effects , for more check here
Reply to remind :)

and if ya like this port, just dont say thanks, hit THANKS , it will cost you nothing :p



XDA:DevDB Information
[ROM][CM11][4.4.4][Port]Xperia Honami Material Themed ROM Samsung Galaxy Y GT-S5360, ROM for the Samsung Galaxy Y GT-S5360

Contributors
raisul2010.5396
Source Code: http://github.com/androidarmv6

ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 2.6.x
ROM Firmware Required: Stock 2.3 Firmware
Based On: CyanogenMod

Version Information
Status: Stable
Current Stable Version: Build [2.0]
Stable Release Date: 2016-02-17
Current Beta Version: Build[1.0]
Beta Release Date: 2015-12-11

Created 2015-12-11
Last Updated 2016-02-17
 

thedeadfish59

Senior Member
May 28, 2013
1,238
2,137
Saudi Arabia
web.facebook.com
OnePlus 6T
Reserved

for changelog

CHANGELOG

Code:
=============================================
CHANGELOG (17-02-2016)
=============================================
1)Implemented GetUx kernel as default cause many reported thats a good kernel
2)Fixed WiFi tethering issue
3)Fixed Camera FC issue
4)Removed some unwanted files and libraries
5)Small File Manger app
6)Light File manager, deleted amaze file manager for free space
7) Fixed some FC issues
=============================================
CHANGELOG (02-01-2016)
=============================================
1)Resized and redesigned framework for better performance
2)Fixed some random force close
3)Removed Sony Setup Wizard
4)Removed Piktures app
5)Added Quickpic for faster Gallery access (renamed as Album)
6)Added MonsterUI in system and added option to access directly from Settings
7)Added Sony Video app (Force closes when you open ,access videos from File Manager)
8)Small Video app
9)Redesigned Settings, Fixed many force closes
10)Removed s2e, use your desired second partition app
11)Added swap script, 3rd partition of sdcard will automount as linux swap
12)Fixed various bugs
13)Smoother build, faster than stock cm11
14)Added Pinaslang Nethunter Kernel and Modules
 
Last edited:

thedeadfish59

Senior Member
May 28, 2013
1,238
2,137
Saudi Arabia
web.facebook.com
OnePlus 6T
Reserved

Eye Candy(Screenshots xD ) :

i98lvAi.png


HCMHyQt.png


erEAI30.png


ScMM7eX.png


rp1JDtA.png


5ODNhd7.png


k2LcXOk.png


Dw8I6Co.png


VTVBPQ1.png


gImbwby.png


2ODHJKx.png


5mqyCDn.png
 
Last edited:

thedeadfish59

Senior Member
May 28, 2013
1,238
2,137
Saudi Arabia
web.facebook.com
OnePlus 6T
Woah! Awesome new lollipop-themed cm11 rom ! Good work @raisul2010.5396 for porting even newer & better ROMs :good:.
Gonna try it ASA my gt-s5360 comes back alive (mainboard shorted & dead :( , given for servicing)

Thats sad, same ****t happened with me at 2014 while flashing with ODIN, it will be revived I hope, try it and le me know, and help me to fix bugs :D though cm11 is slow, but you definitely gonna love this ROM !
 
  • Like
Reactions: ghostrider_reborn

thedeadfish59

Senior Member
May 28, 2013
1,238
2,137
Saudi Arabia
web.facebook.com
OnePlus 6T
s2e supported

Is this ROM can manage S2E? I have problem configuring my internal storage. Any solution? PLease ..
:(

Yep this rom is s2e supported and you can manage s2e by maing a second partition and mount it properly , its tested by me so I can say s2e is completely working, for s2e settings, check @psyke83 s s2e mod thread, its explained there how you can deal with s2e partitions :)
 

thedeadfish59

Senior Member
May 28, 2013
1,238
2,137
Saudi Arabia
web.facebook.com
OnePlus 6T
Stable but laggy

Is this ROM stable enough for daily use ? How to increase internal memory so that more apps could be installed ?

As cm11 is stable but laggy, so this ROM is same , stable but laggy, this rom is stable enough for daily use , but wake up delays often make our life hell :p (kidding) you can use s2e (recommended) or link2sd plus to move apps to second partition :)
 

ackhimical

Member
Aug 6, 2015
15
3
Iligan City
Yep this rom is s2e supported and you can manage s2e by maing a second partition and mount it properly , its tested by me so I can say s2e is completely working, for s2e settings, check @psyke83 s s2e mod thread, its explained there how you can deal with s2e partitions :)
I already done partitioning via CMW but still S2E won't work, and also Link2SD is not working it says "read file only". Can you give me the link please? :)
 

thedeadfish59

Senior Member
May 28, 2013
1,238
2,137
Saudi Arabia
web.facebook.com
OnePlus 6T
I already done partitioning via CMW but still S2E won't work, and also Link2SD is not working it says "read file only". Can you give me the link please? :)

I dont prefer to repartition sdcard via cwm, use MiniTool Partition Wizard for making an ext2/3/4 partition on sdcard, howeva, u can format and reinstall the rom, check if you can deal with s2e or not,
if==yes
Good to go;
else
delete s2ereboot and install link2sd 3.5.2 plus version (via lucky patcher);
install supersu for better root access/permissions
 
  • Like
Reactions: ackhimical

ackhimical

Member
Aug 6, 2015
15
3
Iligan City
I dont prefer to repartition sdcard via cwm, use MiniTool Partition Wizard for making an ext2/3/4 partition on sdcard, howeva, u can format and reinstall the rom, check if you can deal with s2e or not,
if==yes
Good to go;
else
delete s2ereboot and install link2sd 3.5.2 plus version (via lucky patcher);
install supersu for better root access/permissions
Thanks, I'll try to install Link2SD 3.5.2 via lucky patcher.. :)
 

jonny789

Senior Member
Oct 18, 2012
235
21
Really liked this ROM. After installing Pinuslang Nethunter Kernel & Broadcom Booster, Lags are not much visible.
But I dont like buttons in bottom bar. It is taking space unnecessarily. Status bar is quite thin and info is not visible in status bar.
How to remove bottom bar ? How to add more toggles ?

---------- Post added at 09:52 PM ---------- Previous post was at 09:46 PM ----------

Thanks, I'll try to install Link2SD 3.5.2 via lucky patcher.. :)

For internel memory, I used Link2SD Extreme method. Working in this ROM.
 

thedeadfish59

Senior Member
May 28, 2013
1,238
2,137
Saudi Arabia
web.facebook.com
OnePlus 6T
Really liked this ROM. After installing Pinuslang Nethunter Kernel & Broadcom Booster, Lags are not much visible.
But I dont like buttons in bottom bar. It is taking space unnecessarily. Status bar is quite thin and info is not visible in status bar.
How to remove bottom bar ? How to add more toggles ?

---------- Post added at 09:52 PM ---------- Previous post was at 09:46 PM ----------



For internel memory, I used Link2SD Extreme method. Working in this ROM.

go to /system/build.prop and find this line

Code:
qemu.hw.mainkeys=0

change it like below


Code:
qemu.hw.mainkeys=1

reboot and report me :)
 

ackhimical

Member
Aug 6, 2015
15
3
Iligan City
go to /system/build.prop and find this line

Code:
qemu.hw.mainkeys=0

change it like below


Code:
qemu.hw.mainkeys=1

reboot and report me :)
Yes Link2SD is working! I dont have problem on my internal storage now .. Thanks :D

---------- Post added at 01:03 PM ---------- Previous post was at 12:49 PM ----------

Is this ROM stable enough for daily use ? How to increase internal memory so that more apps could be installed ?
Yes its stable. For internal storage problem download Link2SD 3.5.2 and make you have second partition on your sd.. Hope that'll help :)
 
  • Like
Reactions: thedeadfish59

Top Liked Posts

  • There are no posts matching your filters.
  • 30
    (Updated in 17-2-2016)[Port]Sony Xperia Material Themed ROM For Samsung Galaxy Y GT-S5360

    Hey there totoro users, back with a new port! Presenting the pure xperia framework based ROM ported from Galaxy Ace 5830i ( Check Here and hit Thanks to him) , took CyanoGenmod 11 for totoro as base, so lags are expected, as devs didn't solve the issues of lag, so we cant expect this ROM as 100% lagfree or smooth, however, its a lot better than stock cm11, surf to know more! :eek: As its an initial build, bugs are expected as well, feel free to report!



    Features:

    -Sony Z5 bootlogo
    -Sony Z5 bootanimation
    -Sony Z3 lockscreen
    -Sony Z3 media small app
    -Sony Z3 dialer
    -Sony Z3 contacts
    -Sony Z3 Framework
    -Sony Z3 Clock and clock widgets
    -Sony Z3 SystemUI (Statusbar)
    -Sony Z3 Sound enhancement
    -Sony Z3 Small apps
    -Sony Z3 Home launcher
    -Sony Z3 Stock Themes
    -Sony Z5 Music (Must Install update)
    -Sony Z5 Video (Must Install update)
    -Sony Z3 Conversations
    -Sony Z3+ Wallpapers
    -Sony Z3 Sounds
    -Sony Z5 Keyboard
    -Sony Z3 Calendar
    -Sony Z3 Calculator
    -Sony xLoud
    -QuickPic renamed as Album
    -ViPerFX
    -Amaze File Manager
    -Status Bar Tint
    -Lollipop Easter Egg/Game
    aaaand surf to know more! :D


    Installation:

    Same as CM11, Repeating it for newbies

    1) Turn off your galaxy Y
    2)After boot in the download mode by pressing the three button combination (volume down + home + power button)
    3)Connect cable and open ODIN in PC
    4)Press Volume UP then . Download Recovery from Here and flash it via ODIN (PDA Section)
    5)then it will reboot at recovery, In recovery, , format everything in Mounts And Storage menu except sdcard, then go to install ZIP from SDcard, flash the ported ROM (See in download section)
    6)Reboot and if everything goes fine, ROM will take 6mins or more to boot
    7) Update your apps from here (Specially music, sketch, notes)
    8)To Enable Lollipop features, Go to Xposed and install the framework then tick on all modules
    then

    Go to tinted status bar
    -uncheck legacy gradient mode
    -overly mode none
    -default settings check link status bar colors
    -check respect kitkat apis
    exit

    Then install App Settings and activate its module in Xposed
    Find MonsterUI app from here
    then Turn on
    then Set DPI as 90
    exit
    reboot

    Goto MonsterUI from Settings
    Choose your material color in Primary Color (In my case I chose cyan color, as original xperia lollipop )
    Just Any color you want
    Reboot and you are done.



    To disable Navigation Bar , go here >> link
    About CyanogenMod:

    Code:
    * Your warranty is now void.
     * Me / CM / AndroidARMv6 Team are not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at any of us for messing up your device, we will laugh at you.
     * Collectively, and at the same time.


    What's working What's not (lol BUGS):

    Check this link for common cm11 issues

    1)Cant edit/add widget buttons in Statusbar
    2)(often)Rainbow color scatters in Dialer
    3)Volume control FC


    DONT ASK FOR UNUSUAL FC ISSSUES , those are cm11 bugs which can be solved if you flash stock and cm11 later


    others, tell me :D[/SIZE]

    Flashing gapps make cm11 slow as hell, its no RECOMMENDED to flash gapps then, but if ya want, flash
    ,sd-ext version of gapps, check madteam's website for that

    Downloads:





    Build [1.0] (Very initial stage):
    Link

    For Youtube:​
    Use this one to watch videos from Youtube in HQ >> link

    For TrackID:​



    Scripts to Deal with lags (RECOMMENDED):


    Broadcom Booster

    Adrenaline Engine Script



    Custom Kernel Pinuslang Nethunter to have better performance :

    Link

    Then choose min clock and max clock both as 832mhz, I/O scheduler as sio, Governor as PERFORMANCE to have the best performance , it will almost fix wake up delay bug, you will have to unlock developer options to get the option menu in settings, to do that go to Settings>About> tap on build number several times and Performance menu will appear on settings menu.


    Credits:

    -AllahSWT
    -grain24 (For making it bootable in Ace 5830i, cheers! :D )
    -raisul2010.5396 (Me :p For porting it for Galaxy Y )
    -psyke83
    -bielt.v
    -spacecaker
    -ViPER520 (For ViperFX sound effects , for more check here
    Reply to remind :)

    and if ya like this port, just dont say thanks, hit THANKS , it will cost you nothing :p



    XDA:DevDB Information
    [ROM][CM11][4.4.4][Port]Xperia Honami Material Themed ROM Samsung Galaxy Y GT-S5360, ROM for the Samsung Galaxy Y GT-S5360

    Contributors
    raisul2010.5396
    Source Code: http://github.com/androidarmv6

    ROM OS Version: 4.4.x KitKat
    ROM Kernel: Linux 2.6.x
    ROM Firmware Required: Stock 2.3 Firmware
    Based On: CyanogenMod

    Version Information
    Status: Stable
    Current Stable Version: Build [2.0]
    Stable Release Date: 2016-02-17
    Current Beta Version: Build[1.0]
    Beta Release Date: 2015-12-11

    Created 2015-12-11
    Last Updated 2016-02-17
    8
    Really liked this ROM. After installing Pinuslang Nethunter Kernel & Broadcom Booster, Lags are not much visible.
    But I dont like buttons in bottom bar. It is taking space unnecessarily. Status bar is quite thin and info is not visible in status bar.
    How to remove bottom bar ? How to add more toggles ?

    ---------- Post added at 09:52 PM ---------- Previous post was at 09:46 PM ----------



    For internel memory, I used Link2SD Extreme method. Working in this ROM.

    go to /system/build.prop and find this line

    Code:
    qemu.hw.mainkeys=0

    change it like below


    Code:
    qemu.hw.mainkeys=1

    reboot and report me :)
    5
    New update is already built! With tethering bugfix and camera fixes, added some new stuffs as well as deleted some stuff as well, new build will be uploaded tomorrow night, stay with this thread brothers :)
    4
    Reserved

    for changelog

    CHANGELOG

    Code:
    =============================================
    CHANGELOG (17-02-2016)
    =============================================
    1)Implemented GetUx kernel as default cause many reported thats a good kernel
    2)Fixed WiFi tethering issue
    3)Fixed Camera FC issue
    4)Removed some unwanted files and libraries
    5)Small File Manger app
    6)Light File manager, deleted amaze file manager for free space
    7) Fixed some FC issues
    =============================================
    CHANGELOG (02-01-2016)
    =============================================
    1)Resized and redesigned framework for better performance
    2)Fixed some random force close
    3)Removed Sony Setup Wizard
    4)Removed Piktures app
    5)Added Quickpic for faster Gallery access (renamed as Album)
    6)Added MonsterUI in system and added option to access directly from Settings
    7)Added Sony Video app (Force closes when you open ,access videos from File Manager)
    8)Small Video app
    9)Redesigned Settings, Fixed many force closes
    10)Removed s2e, use your desired second partition app
    11)Added swap script, 3rd partition of sdcard will automount as linux swap
    12)Fixed various bugs
    13)Smoother build, faster than stock cm11
    14)Added Pinaslang Nethunter Kernel and Modules
    4
    Reserved

    Eye Candy(Screenshots xD ) :

    i98lvAi.png


    HCMHyQt.png


    erEAI30.png


    ScMM7eX.png


    rp1JDtA.png


    5ODNhd7.png


    k2LcXOk.png


    Dw8I6Co.png


    VTVBPQ1.png


    gImbwby.png


    2ODHJKx.png


    5mqyCDn.png