I'll see what I can do tonight, I broke its branch the other day so I'll have to do a git reset
Sent from my GT-I9100 using Tapatalk 2
[KERNEL][UNOFFICIAL BUILDS][JB/KK][Vx.43v76]DorimanX Test builds
- Thread starter eskriminal
- Start date
I'll see what I can do tonight, I broke its branch the other day so I'll have to do a git reset
Sent from my GT-I9100 using Tapatalk 2
Anyone experience high l2_hsic Wake lock on unofficial kernel?? Had did a full wipe and clean install but problem still persist.. Had no issue with slim stock kernel and official x.39 and past dorimanx?? I can't seems to figure out what the causes.. And I don't seems to have any other Wake lock as bad as l2_hsic.. :what:
Sent from my GT-I9100 using Tapatalk 4
Sent from my GT-I9100 using Tapatalk 4
Last edited:
Anyone experience high l2_hsic Wake lock on unofficial kernel?? Had did a full wipe and clean install but problem still persist.. Had no issue with slim stock kernel and official x.39 and past dorimanx?? I can't seems to figure out what the causes.. And I don't seems to have any other Wake lock as bad as l2_hsic.. :what:
Sent from my GT-I9100 using Tapatalk 4
I get like 40 seconds in an hour
Sent from my GT-I9100 using Tapatalk 2
That's was roughly what I got back then.. Still finding the root that causes it.. As my battery drains faster than previously..
Sent from my GT-I9100 using Tapatalk 4
Nope.. Was using xxms2 since aging ago.. I don't have any issues with l2_hsic before.. I had seen 2 person with similar issues on slimrom official thread.. But from what saw the 2 was related to fast dormancy.. I had my fast dormancy off as my network doesn't support..
I also have read somewhere certain Google services does trigger l2_hsic but I can't find which.. I had greenify and off all notification and sync.. My usage patterns had been the same for a few months.. I'm still digging which and what is casing the drain..
Sent from my GT-I9100 using Tapatalk 4
Eskriminal time to release v3 
zzmove is very smooth and no sod or freezes for past 13 hours :beer::thumbup:
Sent from my GT-I9100 using xda app-developers app
zzmove is very smooth and no sod or freezes for past 13 hours :beer::thumbup:Sent from my GT-I9100 using xda app-developers app
Eskriminal time to release v3
Sent from my GT-I9100 using xda app-developers app
hehe new release eta 2 hours
Sent from my GT-I9100 using Tapatalk 2
How to change build date???.....it is showing wrong dates??
Eg: if I build on 25/8 9pm build date is shown as 26/8 1 pm
Sent from my GT-I9100 using xda app-developers app
is your virtual machine set up to the right time/ date
Sent from my GT-I9100 using XDA Premium 4 mobile app
Sent from my GT-I9100 using XDA Premium 4 mobile app
Ya I changed the time and date yesterday before building but there was a lot of warnings when compiling due to the change
Sent from my GT-I9100 using xda app-developers app
Anyone experience high l2_hsic Wake lock on unofficial kernel?? Had did a full wipe and clean install but problem still persist.. Had no issue with slim stock kernel and official x.39 and past dorimanx?? I can't seems to figure out what the causes.. And I don't seems to have any other Wake lock as bad as l2_hsic.. :what:
Sent from my GT-I9100 using Tapatalk 4
If my memory serves me right, that means Google services is waking your phone up. Not much you can do without breaking the play store.
Sent from my GT-I9100 using xda app-developers app
it essentially allows more complicated security rights management and rules
I personally don't see the point in enabling it, but a few people I've seen want it enabled, don't know why
the time and date thing is pretty weird
Sent from my GT-I9100 using Tapatalk 2
new build released! running smoothly and I fixed the defconfig
8.x branch is still broken, sorry
Sent from my GT-I9100 using Tapatalk 2
8.x branch is still broken, sorry
Sent from my GT-I9100 using Tapatalk 2
flashed now....boot is fast...very fast
:good:....let's test zzmove, eh?Thanks ma8 :good:
flashed now....boot is fast...very fast
Thanks ma8 :good:
hehe yup, as usual report how it goes
Sent from my GT-I9100 using XDA Premium 4 mobile app
huh....first report.
.....zzmove update is simply awesome....it's so fast....no issues so far....battery drain is acceptable as of now....and I feel that whole system got some overal boost in terms of responsiveness and performance.....I switched I/O from ROW to CFQ for awake tho.....and zzmove in use ....the rest is intact(my settings on default profile)....I love this test builds man:good:
huh....first report.
Second report....
Sent from my GT-I9100 using xda app-developers app
---------- Post added at 02:49 PM ---------- Previous post was at 02:47 PM ----------
huh....first report.
How about bfq?? Its working good for me
Sent from my GT-I9100 using xda app-developers app
Second report....
Sent from my GT-I9100 using xda app-developers app
---------- Post added at 02:49 PM ---------- Previous post was at 02:47 PM ----------
How about bfq?? Its working good for me
Sent from my GT-I9100 using xda app-developers app
I didn't try...I had row be4 ....but yesterday I wiped my extsdcard and then I used cfq for ums mode on pc to avoid connection loss with row(mass data transfer
)....and I left it like that....and it seems that's better than row somehow Similar threads
- Locked
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
155Hey guys!
So from observations by @rkoby13 and myself, there seems to be a demand for regular builds of DorimanX's kernel!
This thread will serve as a place for logs, reports, and discussion relating to these unofficial builds by me.
Currently the plan is to compile v9 builds, whenever @dorimanx adds major updates or significant modifications to his source, however this may, and probably will, result in UNSTABLE AND EXPERIMENTAL RELEASES
Disclaimer:
Dori tests highly experimental commits prerelease, and if your device is damaged, wiped, or in any way negatively affected by these releases it's not the fault of Dorimanx, or me. In flashing these releases you accept full responsibility for any consequences of its use.
In this op, I'll have a log of which builds are most stable and which ones have bugs reported or major issues in code, and builds with extreme issues will be removed.
As x.39 was just released, the first build will be uploaded after the next major addition to the kernel sources, and every major change after that.
If there is a commit that I have not considered major but is important to you, either reply to the thread or pm me with a link to the commit, and I'll probably update the build to include it. In future, I may also build v8 kernels until their end of life, if many people show a desire for this
Finally, just a reminder not to post logs or reports/discuss these builds in any other thread, thanks
I'll also soon be adding my new and improved stweaks settings guide, nearly everything is covered now.
Source: http://github.com/dorimanx/dorimanx-SG2-I9100-Kernel
http://github.com/dorimanx/initramfs3
if anyone has a domain they'd like to offer to mirror I'd be glad (hint hint)
dorimanx has decided to help out with building sometimes, and he'll post here! and apparently no one reads whole op, is this big enough?
latest build by cybernetus http://www.dorimanx.ataliba.net
aaaaaand computoncio has a fileserver too now!
http://dorimanx.casoncia.org79Great News!
Are you ready???
Hyper Drive Online!
We are jumping to 4.4.y galaxy system!!! :highfive:
new 3 kernels uploaded to my BETA storage! before release!
we need to test the support and see if any problems!
So all goes like this:
All kernels support 4.4.y ROMS!
8.x support = STOCK, 4.1.y, 4.2.y, 4.3.y, 4.4.y maliv1(STOCK) maliv2 all the rest!
9.x support = 4.1.y, 4.2.y, 4.3.y, 4.4.y maliv2 only!
10.x support = 4.3.y, 4.4.y maliv3 only!
mali = video driver (for new users that dont care to look for answers)
This is BETA v48!
Kernel has same commits as V47 + maliv3 branch now 10.43 version
Initramfs > https://github.com/dorimanx/initramfs3/commit/d2408d668240fa0fa11f0650a96650c39de6a39c
Big thanks to @fusionjack for init scripts and hacked sql for 4.4.2
have fun testing!
(dont forget! you cant install 4.4.y ROM from my kernel recovery!)
so if you want to install ROM as SEC you will have to replace META-INF forlder
with one that i will attach here!
it's simple changing the way perms added to ROM for selinux! we dont have it, so it's not important.
Open ROM zip. push the META-INF from my zip inside, and save all back.
Install as SEC or PRI ROM.
this is for fusionjack 4.4.2 build!!!!
other roms may have other things in install script! so it's possible to compare if something missing from ORIGINAL fusionjack folder.
all changes are HERE:
META-INF\com\google\android\updater-script
i have added the ORIGINAL script for compare / revert.76soooo seems to be that we are close to awesome kernel version!
i need to sit and add support for 4.4.x android and rename maliv3 branch.
i am very busy at my job, end of year is coming and our customers very happy to spend all remaining budget on cool stuff that they not always need
so i have high pressure OC for my brain to make all done for all!
and XDA is one more customer for me
so please report if any bad things happen, and kernel is this problem, and not some app that went crazy
happy new coming year for all!62News Update!
I have FOUND and fixed:
*Fixed RO bug with 4.4.y ROMS
*Fixed parse error in SAMMY builds (need to test)
*Fixed not sticking theme, root access, timezone, lang, and other system stuff
after BOOT! :laugh::highfive:
This was HUGE bug that i was looking to solve half a year now! and finally its GONE!
*Fixed init perms on folders.
*Added all new updates from main line.
Uploaded V53 all branches to my BETA Storage!
Merry Christmas! every one!
when i have found the BUGS i was LIKE!
HHHHHAAAAAA!!!!
Kernels > https://github.com/dorimanx/Doriman...mmit/288e53a3675cad94a0bdb085e49299310b3397cd
Initramfs > https://github.com/dorimanx/initramfs3/commit/ea5a8d10e324f3d7a357ecf46989d7a35c4ddaea
Have fun testing!
DEBUG!
first boot with V53 will be:
~ # dmesg | grep property
dmesg | grep property
<6>sec-battery sec-battery: sec_bat_set_property: cable was changed(4)
<11>init: skipping insecure property file persist.sys.themePackageName (uid=0 gid=1001 nlink=1 mode=100770)
<11>init: skipping insecure property file persist.sys.usb.config (uid=0 gid=1001 nlink=1 mode=100770)
<11>init: skipping insecure property file persist.sys.ui.hw (uid=0 gid=1001 nlink=1 mode=100770)
<11>init: skipping insecure property file persist.sys.camera-sound (uid=0 gid=1001 nlink=1 mode=100770)
<11>init: skipping insecure property file persist.sys.root_access (uid=0 gid=1001 nlink=1 mode=100770)
<11>init: skipping insecure property file persist.sys.themeId (uid=0 gid=1001 nlink=1 mode=100770)
~ #
SEC BOOT and any others!
~ # dmesg | grep property
dmesg | grep property
<6>sec-battery sec-battery: sec_bat_set_property: cable was changed(4)
~ #
~ #
~ # dmesg | grep property
dmesg | grep property
<6>sec-battery sec-battery: sec_bat_set_property: cable was changed(4)
~ #
~ # dmesg | grep property
dmesg | grep property
<6>sec-battery sec-battery: sec_bat_set_property: cable was changed(4)
PEACE! Yee!56hi to fearless beta testers.
i want to address the sg2 nation
its my birthday today, and i have enoth $ to buy new device.
So as i wished i will buy new sg4 i9505 device next week.
my device will be converted to nice and simple phone, (with my kernel) and passed to my wife. so i will keep updating kernel from main line, and keep adding good stuff i will see.
so Sg4 nation will get "new" dev to boost the fun
so all who want to join me, dont wait
any way sg4 is great but very different, so its will take some time for me to learn, and start from 0.
i will release stable release for all.
and in case of recovery code from gm will be open, i will do all i can to update recovery.
happy new year my friends
Sent from my GT-I9100
