[fastboot] l9 p760 p765 p768 p769

Has anyone been able to confirm whether this works on Windows 8?

jbonilla51 said:

Has anyone been able to confirm whether this works on Windows 8?

Click to expand...

Click to collapse

yes, it work

Not working on p760. After instert battery, phone show battery on screen and charging.


HELP ME!!

Hi. Can you tell what can i do ?

< waiting for the device >
sending 'x-loader' (384 KB)...
OKAY [ 0.204s]
writing 'x-loader'...
FAILED (remote: partition does not exist)
finished. total time: 0.211s
sending 'u-boot' (1024 KB)...
OKAY [ 0.536s]
writing 'u-boot'...
FAILED (remote: partition does not exist)
finished. total time: 0.543s
Done
Press any key to continue . . .

Click to expand...

Click to collapse

Always this.

I'm stuck into fastboot.

Lg p760,

Deedi said:

Not working on p760. After instert battery, phone show battery on screen and charging.

Code:

Plug USB cable
wait 4 seconds and put battery back in.

Device descriptor:
        bLength            = 18
        bDescriptorType    = 1
        bcdUSB             = 528
        bDeviceClass       = 255
        bDeviceSubClass    = 255
        bDeviceProtocol    = 255
        bMaxPacketSize0    = 64
        idVendor           = 451
        idProduct          = D00F
        bcdDevice          = 0
        iManufacturer      = 33
        iProduct           = 37
        iSerialNumber      = 0
        bNumConfigurations = 1
reading ASIC ID
usb_write 4
usb_read 81
 [*] read 0 bytes
NumOfSubblocks: 0x5
Subblock ID: 0x1
Subblock Size: 0x5
CH enabled: 0x7
ROM revision: 0x4
Checksum Subblock: 0x15
CHIP: 4430
IDEN: 4b8f0c704c184555a2663213520fb147279cf0b8
MPKH: 5f4092eccddf90fa43f546adf89508b31b9c74795e9516194c0ea6412fdcb7f6
CRC0: 9c669ad9
CRC1: 682adccf
sending 2ndstage to target... f0030002
usb_write 4
usb_write 4

wait 5-lelelel...

 [*] msg size = 4
usb_write 21552
 [*] data size = 21552
usb_close

Reopen usb...


Device descriptor:
        bLength            = 18
        bDescriptorType    = 1
        bcdUSB             = 528
        bDeviceClass       = 255
        bDeviceSubClass    = 255
        bDeviceProtocol    = 255
        bMaxPacketSize0    = 64
        idVendor           = 451
        idProduct          = D00F
        bcdDevice          = 0
        iManufacturer      = 33
        iProduct           = 37
        iSerialNumber      = 0
        bNumConfigurations = 1
waiting for 2ndstage response...
usb_read 4
usb_read got: 0, expected: 4, errno: 31
usb_read got GEN_FAILURE - got: 0, expected: 4, errno: 31
usb_read failed: 31
usb read = 0
unexpected 2ndstage response
< waiting for device >

HELP ME!!

Click to expand...

Click to collapse

I'm having this same issue, has any answer been found?

abrahammmmmmm_ said:

I'm having this same issue, has any answer been found?

Click to expand...

Click to collapse

This error is most likely caused by moving the usb cable to much. My cable and plug are faulty, and if I move the phone to much I get that error. Lay the phone face down and don't move it (even to check if the screen is inverted) or the wire during the whole process.

Sent from my LG-P769 using XDA Premium 4 mobile app

To make it short....and yes feel free to laugh at me for this huge mistake ...I ended up flashing CWM 6.0.4.5 Touch for LG P760 on my p769 but it came out backwards... me being curious and not being scared to try things i flashed the cwm touch fix from the unlocking bootloader thread. Well it didn't work jaja and now no matter if i flash a rom everything is backwards (Example: If i try tapping on message icon it ends up selecting something somewhere else) How can i fix all this? lol

Versatil2010 said:

To make it short....and yes feel free to laugh at me for this huge mistake ...I ended up flashing CWM 6.0.4.5 Touch for LG P760 on my p769 but it came out backwards... me being curious and not being scared to try things i flashed the cwm touch fix from the unlocking bootloader thread. Well it didn't work jaja and now no matter if i flash a rom everything is backwards (Example: If i try tapping on message icon it ends up selecting something somewhere else) How can i fix all this? lol

Click to expand...

Click to collapse

Install a p769 recovery, reboot into the correct recovery, then apply the touch screen fix.

Sent from my LG-P769 using XDA Premium 4 mobile app

kuma82 said:

Install a p769 recovery, reboot into the correct recovery, then apply the touch screen fix.

Sent from my LG-P769 using XDA Premium 4 mobile app

Click to expand...

Click to collapse

yeah i managed to install correct recovery again via fastboot.

So if i flash the touch fix again it will revert back?


ok all fixed now thx alot....why didnt i think of that lmao

Versatil2010 said:

yeah i managed to install correct recovery again via fastboot.

So if i flash the touch fix again it will revert back?


ok all fixed now thx alot....why didnt i think of that lmao

Click to expand...

Click to collapse

Where did you get the recovery.img and boot.img for p769? I searched everywhere but cant find it. Also, can i directly flash a KDZ file through fastboot on P769? My phone suddenly died and i am trying to fix it.

nitagro said:

Where did you get the recovery.img and boot.img for p769? I searched everywhere but cant find it. Also, can i directly flash a KDZ file through fastboot on P769? My phone suddenly died and i am trying to fix it.

Click to expand...

Click to collapse

Hey buddy here is the link for p769 recovery https://www.dropbox.com/s/nfw0a5w3r3fw6os/recovery-6.0.4.9-p769.img and if you wish to flash kdz then you should follow this http://xdaforums.com/showthread.php?t=2085344 guide by cmahendra ...

It should solve your problem...:good:

exeumc said:

< waiting for the device >
sending 'x-loader' (384 KB)...
OKAY [ 0.204s]
writing 'x-loader'...
FAILED (remote: partition does not exist)
finished. total time: 0.211s
sending 'u-boot' (1024 KB)...
OKAY [ 0.536s]
writing 'u-boot'...
FAILED (remote: partition does not exist)
finished. total time: 0.543s
Done
Press any key to continue . . .

Click to expand...

Click to collapse

Always receiving this then trying to recover my p760. Maybe someone knows how to fix it?

Click to expand...

Click to collapse

I've got the same partition error on a P760.
I've searched multiple solutions, read a lot, googled a lot, but I can't find a solution.
And I never found any tool to repartition the phone. The fastboot partition command returns a general failure.
Thing is, in fastboot you do not have lots of commands, like checking for partitions and everything.
So I'm stuck.

I even tried to reboot into a recovery from fastboot. the command tells me the download is ok, that the phone is rebooting, but that's not true.
For your information, the screen or keys never goes on. that phone is almost brain dead, only the omap and then fastboot interface seems to be working.

Try to flash kdz offline flasher to fix it may be it will fix that problem

Sent from my LG-P760 using XDA Free mobile app

nish@nish said:

Try to flash kdz offline flasher to fix it may be it will fix that problem

Sent from my LG-P760 using XDA Free mobile app

Click to expand...

Click to collapse

If phone can't enter S/W mode he can't use kdz offline flasher nor LG support tool.

Enviado desde mi bq Maxwell Plus mediante Tapatalk

FAILED (remote: partition does not exist) while flashing x-loader and u-boot

Lelus said:

I take no responsibility for any damages incurred to your phone
Please use this script only when necessary


Here is a little script I put together to fastboot L9s with ability to flash/restore ics xloader and uboot (p760, p765, p768, p769) jb (p760)

*I've only tested it on Win 7, but it should work on Vista , not sure about XP and 8

Very useful post about installing the drivers

*Some phones may need a different timing, 4 seconds won't work, worth to try between 0 to 4s and see what works best

Original thread about fastboot
http://xdaforums.com/showthread.php?t=2119090

It's based on wpark - [DEV][Bootloader] u-boot / omap4boot for P920/P720/P940 and its variant


update: file updated, mylk Thanks for catching the mistake!
update2: added p769 20f

Click to expand...

Click to collapse

Hi Lelus,

By using your tool on P765(India).I am having following error.and also there is nothing on my screen.
Initially it was showing me LG security error.but I flashed it again and dont know what happened than its keep on failing while trying to boot.
I can only get thru the fastboot only....after few seconds phone is shutdown....no recovery nothing is coming up....I am affraid tht i hv brick my phone....
I have read too many thing and now i m getting confused....
PLease help me.


ECHO is off.
Plug USB cable
wait 4 seconds and put battery back in.
waiting for OMAP44xx device...

Device descriptor:
bLength = 18
bDescriptorType = 1
bcdUSB = 528
bDeviceClass = 255
bDeviceSubClass = 255
bDeviceProtocol = 255
bMaxPacketSize0 = 64
idVendor = 451
idProduct = D00F
bcdDevice = 0
iManufacturer = 33
iProduct = 37
iSerialNumber = 0
bNumConfigurations = 1
reading ASIC ID
usb_write 4
usb_read 81
[*] read 0 bytes
NumOfSubblocks: 0x5
Subblock ID: 0x1
Subblock Size: 0x5
CH enabled: 0x7
ROM revision: 0x4
Checksum Subblock: 0x15
CHIP: 4430
IDEN: dd3d69d5f92c66e50c991aeb8a68253a66b2
MPKH: 5f4092eccddf90fa43f546adf89508b31b9c
CRC0: 9c669ad9
CRC1: 682adccf
sending 2ndstage to target... f0030002
usb_write 4
usb_write 4

wait 5-lelelel...

[*] msg size = 4
usb_write 21552
[*] data size = 21552
usb_close

Reopen usb...


Device descriptor:
bLength = 18
bDescriptorType = 1
bcdUSB = 528
bDeviceClass = 255
bDeviceSubClass = 255
bDeviceProtocol = 255
bMaxPacketSize0 = 64
idVendor = 451
idProduct = D00F
bcdDevice = 0
iManufacturer = 33
iProduct = 37
iSerialNumber = 0
bNumConfigurations = 1
waiting for 2ndstage response...
usb_read 4
usb read = aabbccdd
accepted 2ndstage response
sending image to target...
size = 246272
usb_write 4
usb_write 246272
** Done **
< waiting for device >
sending 'x-loader' (384 KB)...
OKAY [ 0.207s]
writing 'x-loader'...
FAILED (remote: partition does not exist)
finished. total time: 0.226s
sending 'u-boot' (1024 KB)...
OKAY [ 0.540s]
writing 'u-boot'...
FAILED (remote: partition does not exist)
finished. total time: 0.547s
Done
Press any key to continue . . .

Is anyone still researchin thr issue mentioned above? I have the same problem and I am able to see either a Mobile Phone - OMAP somewhat USB device or TI-Board - OMAP 4430 in the device manager in windows. Is there any way I can check the nand or the partitions maybe? I tried to fastboot erase, flash and boot and nothing worked until now. Once I could even get the LGTool to see the phone, but it aborded the process somewhen saying it cant communicate. Hope someone can help me.

Sent from my XT1052 using XDA Free mobile app

the most secure solution for partition issue is OCTOPUS BOX...

puntoazul said:

the most secure solution for partition issue is OCTOPUS BOX...

Click to expand...

Click to collapse

it just occurred to me that someone could go out and rip the software off of octopus box

bulletfreak said:

it just occurred to me that someone could go out and rip the software off of octopus box

Click to expand...

Click to collapse

you can get the software.... but you still need the box...

without the box octopus software is unusable

puntoazul said:

you can get the software.... but you still need the box...

without the box octopus software is unusable

Click to expand...

Click to collapse

Octopus box emulation