Hi guys,
Now that several lagfixes are using the ext4 filesystem, perhaps we should look at optimizing ext4 for performance and lifespan of the flash memory.
One of the main things we can change is the journaling method to data=writeback. This should reduce writes and improve performance at a slight expense of reliability. Quote:
"In data=writeback mode, ext4 does not journal data at all. This mode provides a similar level of journaling as that of XFS, JFS, and ReiserFS in its default mode - metadata journaling. A crash+recovery can cause incorrect data to appear in files which were written shortly before the crash. This mode will typically provide the best ext4 performance."
One explanation here:
http://blog.smartlogicsolutions.com...ions-to-improve-ext4-file-system-performance/
Reference here:
http://git.kernel.org/?p=linux/kern...02ac5fa36d7f4c07856fe9cf89391e08986f7;hb=HEAD
HOW TO
1. Change the default mount option of the partition using tune2fs. You need to use a version of tune2fs that supports ext4, the one in busybox 1.17 does NOT. A working version is attached to this post.
- Push the tune2fs file to the phone's SD CARD:
adb push tune2fs /sdcard/
- Copy the tune2fs file to /data/
adb shell
su
cp /sdcard/tune2fs /data/
Now change the options:
/data/tune2fs -o journal_data_writeback /dev/block/mmcblk0p2
To verify:
/data/tune2fs -l /dev/block/mmcblk0p2
Look for the line that says:
Default mount options: journal_data_writeback
* Repeat the above for all other ext4 partitions.
It should take effect after a reboot. The next time it will be mounted automatically with data=writeback. You might have to do the tune2fs settings and reboot twice to get it to stick - I'm not sure why, but I had to.
You can verify this using the mount command:
# busybox mount | grep ext4
/dev/block/mmcblk0p2 on /data type ext4 (rw,noatime,barrier=0,nobh,data=writeback,noauto_da_alloc)
/dev/block/stl10 on /dbdata type ext4 (rw,noatime,barrier=0,nobh,data=writeback,noauto_da_alloc)
2. In addition to that, you can also edit the mount options to include the nobh option, which is a further minor optimization for data=writeback mode.
I personally use the options noatime,barrier=0,nobh,data=writeback. Voodoo already uses some of them like noatime and barrier=0.
I do it using a startup script (you need to know how to use/modify a startup script), with the following commands:
for k in $(busybox mount | grep ext4 | cut -d " " -f3)
do
sync
busybox mount -o remount,barrier=0,nobh $k
done
EDIT: Attached tune2fs that supports ext4. Works on Froyo kernels with ext4 support.
Now that several lagfixes are using the ext4 filesystem, perhaps we should look at optimizing ext4 for performance and lifespan of the flash memory.
One of the main things we can change is the journaling method to data=writeback. This should reduce writes and improve performance at a slight expense of reliability. Quote:
"In data=writeback mode, ext4 does not journal data at all. This mode provides a similar level of journaling as that of XFS, JFS, and ReiserFS in its default mode - metadata journaling. A crash+recovery can cause incorrect data to appear in files which were written shortly before the crash. This mode will typically provide the best ext4 performance."
One explanation here:
http://blog.smartlogicsolutions.com...ions-to-improve-ext4-file-system-performance/
Reference here:
http://git.kernel.org/?p=linux/kern...02ac5fa36d7f4c07856fe9cf89391e08986f7;hb=HEAD
HOW TO
1. Change the default mount option of the partition using tune2fs. You need to use a version of tune2fs that supports ext4, the one in busybox 1.17 does NOT. A working version is attached to this post.
- Push the tune2fs file to the phone's SD CARD:
adb push tune2fs /sdcard/
- Copy the tune2fs file to /data/
adb shell
su
cp /sdcard/tune2fs /data/
Now change the options:
/data/tune2fs -o journal_data_writeback /dev/block/mmcblk0p2
To verify:
/data/tune2fs -l /dev/block/mmcblk0p2
Look for the line that says:
Default mount options: journal_data_writeback
* Repeat the above for all other ext4 partitions.
It should take effect after a reboot. The next time it will be mounted automatically with data=writeback. You might have to do the tune2fs settings and reboot twice to get it to stick - I'm not sure why, but I had to.
You can verify this using the mount command:
# busybox mount | grep ext4
/dev/block/mmcblk0p2 on /data type ext4 (rw,noatime,barrier=0,nobh,data=writeback,noauto_da_alloc)
/dev/block/stl10 on /dbdata type ext4 (rw,noatime,barrier=0,nobh,data=writeback,noauto_da_alloc)
2. In addition to that, you can also edit the mount options to include the nobh option, which is a further minor optimization for data=writeback mode.
I personally use the options noatime,barrier=0,nobh,data=writeback. Voodoo already uses some of them like noatime and barrier=0.
I do it using a startup script (you need to know how to use/modify a startup script), with the following commands:
for k in $(busybox mount | grep ext4 | cut -d " " -f3)
do
sync
busybox mount -o remount,barrier=0,nobh $k
done
EDIT: Attached tune2fs that supports ext4. Works on Froyo kernels with ext4 support.
Attachments
Last edited: