# SUPPORT Huawei P8 Lite
Huawei P8 Lite - Install TWRP Recovery (V2, V3.0.0, V3.0.2), Full System Backup, Android Root (5 & 6) and Return to Recovery Stock - April 27, 2017 Updated.
(Works both on Android 5 and 6 with models L21 and L23).
(HiSilicon Kirin 620 processor.)
DO THIS UNDER YOUR RESPONSIBILITY!
IMPORTANT!
-If you are not sure to do this tutorial better do not do it, there is no hurry so quiet.
<< INSTALL RECOVERY TWRP (V2, V3.0.0, V3.0.2) >>
There are 3 methods to do it, through PC or through an App, which is very simple, here I explain how:
Method 1 - Using PC - Automatic Process:
Instructions for both versions:
1. Download INSTALAR RECOVERY TWRP (V2, V3.0.0, V3.0.2) HUAWEI P8 LITE.rar
2. Download adb-setup-1.4.3.rar
3. Unzip adb-setup-1.4.3.rar and run the program. (This is to install adb drivers and the pc can detect the terminal.)
You will see a blue console screen, type "and" or "accept" at all and close the window. If you ask them to restart the pc, do it and that's it.
4.Start your phone in Fastboot mode; Switch off the phone and press the "vol-" key and without releasing it connect it to the PC until the Fastboot screen appears.
5. Unzip "INSTALL RECOVERY TWRP (V2, V3.0.0, V3.0.2) HUAWEI P8 LITE.rar" and run the file "INSTALL RECOVERY TWRP (V2, V3.0.0, V3.0.2) HUAWEI P8 LITE.bat" and Follow the steps
It will not take more than 5 minutes, it's just a matter of pressing ENTER, that's it!
Files:
TWRP V2: https://mega.nz/#!SZkzlQCb!iKBl1-6arjT6_9exrp9sc2aVzp7NnuKxECz6MVJ_Oms
TWRP V3.0.0: https://mega.nz/#!CZ91RQSA!B_kl3YPn7H38nbyG-5bVk2yt6qGDSsu3A2cnGysj7u4
TWRP V3.0.2: https://mega.nz/#!rFcX3TxC!89ePFv4x9iEvv22WCO-AUHjIDeFhKw4UUIuZ4d7p7LU
ADB: https://mega.nz/#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
Method 2 - By App:
Instructions for both versions:
1.Search in the Playstore App "Flashify", Download and Install.
2.Download the RecoveryTwrp (V2, V3.0.0, V3.0.2) .zip
3. Unzip RecoveryTwrp (V2, V3.0.0, V3.0.2) .zip.
4.Start the flashify app, drop root permissions and continue.
5.Press "recovery image"> "choose a file", select the scanner of your choice, search and select the Recovery that you downloaded.
6. Click on "Yup", wait for the process to finish.
7.The App can be closed.
Files:
TWRP V2: https://mega.nz/#!PBN0DAyD!NzWAX8Kn0ZtHftJZmf1_bir4OoppThMVwjP9Q6XXK9s
TWRP V3.0.0: https://mega.nz/#!LZtUnSDS!N2dFfxiK4ed5dplkt0o9lQAeAzLVgLVxgy0pXCYeOgw
TWRP V3.0.2: https://mega.nz/#!bNNRCBBY!UdXY6yWcoryK47SgV0352_JNfFLE0oIReaXDtqwWJaI
ADB: https://mega.nz/#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
Method 3 - Using PC - Manual Process:
Instructions for both versions:
1. Download and Unzip the file minimal_adb_fastboot_v1.3.1_setup.rar.
2. Run the minimal_adb_fastboot_v1.3.1_setup.exe program and complete the installation steps.
3. Go to the installation path of the program "C: \ Program Files (x86) \ Minimal ADB and Fastboot" (depending on your operating system may vary).
4. Copy the recovery file that you want to install to the path mentioned above. Example: "RecoveryTwrpV3.0.2.img".
5. Start your Phone in Fastboot mode: Switch off the phone and press the "vol-" key and without releasing it, connect it to the PC until the Fastboot screen appears.
6. Run the program "MAF32.exe" (located in the installation path) with or without administrator permissions, a black window with the text "C: \ Program Files (x86) \ Minimal ADB and Fastboot" will appear.
7. Write the following commands without quotation marks and parentheses: "fastboot flash recovery (file name with its extension)".
Example: "fastboot flash recovery RecoveryTwrpV3.0.2.img". (without quotation marks).
8. Press "Enter or Enter" key, it will not take 1 mn to install, once finished close the window, disconnect the Phone and Restart.
Files:
Minimal_adb_fastboot_v1.3.1_setup.rar: https://mega.nz/#!fYdV0C4Y!CkdeBxpgyEc09MdJ1-WWtvI48JwXoDBrpx_ohIzT4Jc
TWRP V2: https://mega.nz/#!PBN0DAyD!NzWAX8Kn0ZtHftJZmf1_bir4OoppThMVwjP9Q6XXK9s
TWRP V3.0.0: https://mega.nz/#!LZtUnSDS!N2dFfxiK4ed5dplkt0o9lQAeAzLVgLVxgy0pXCYeOgw
TWRP V3.0.2: https://mega.nz/#!bNNRCBBY!UdXY6yWcoryK47SgV0352_JNfFLE0oIReaXDtqwWJaI
*
And that's it!
<< BACKUP >>
Instructions:
1. Turn off the Computer, Start in Recovery Mode by pressing the keys (Vol + & Power) at the same time without releasing until you enter the Recovery.
2. At the start, for the first time, a text will appear in English which says:
("Keep System as Read Only"
TWRP can leave unmodified the system partition to make it easier for you to take official updates.
Installing zips or performing adb operations can modify the system partition).
Select "Swipe to Allow Modifications" so they can install Zips or Roms or do other operations.
3. Select "Backup".
4. Check the "Cache, Boot, Data, System" boxes.
5. Press "Select Stogare", choose "MicroSDCard".
6. Select "Swipe to Backup" and wait for the process to finish, the time will depend on the size of the backup, please be patient.
And that's it!
<< ROOT ANDROID (5 & 6) >>
Instructions:
1. Download the files and save them in the SD card.
2. Start the phone in Recovery TWRP. (Vol + & Power)
3. Select Install, search for the file "BETA-SuperSU-v2.62-20151210170034.zip", and press "swipe to install", wait for the process to finish.
4. Return to the "Install" menu, look for the file "BETA-SuperSU-v2.66-20160103015024.zip", and press "swipe to install", wait for the process to finish.
5. Reboot the system. (The phone will reboot 2 times do not worry).
And ready! That would be all!
If for some reason you brickea the phone, install (flash) this file UPDATE-unSU.zip, this will solve the problem.
Files:
1. BETA-SuperSU-v2.62: https://mega.nz/#!nJ9FXAjD!Jgelz-zLHtcITrkaA2_FpyS6CoK4fcNaPT-GD2ICsxA
2. BETA-SuperSU-v2.66: https://mega.nz/#!uNsxwIbB!AXQzZL67NTL_unnU4P3cE0p14Jc-tjATIYyvrYshTsQ
3. UPDATE-unSU: https://mega.nz/#!3ZMCBDpJ!Lj9Fc1YMIrz3pGLwO0EM72xF-58Vv46ZNE-esov2Rbg
<< INSTALL RECOVERY STOCK >>
There are 3 methods to do it, through PC or through an App, which is very simple, here I explain how:
Method 1 - Using PC - Automatic Process:
1. Download INSTALAR RECOVERY STOCK HUAWEI P8Lite - Method Per PC.
2. Download adb-setup-1.4.3.rar
3. Unzip adb-setup-1.4.3.rar and run the program. (This is to install adb drivers and the pc can detect the terminal.)
You will see a blue console screen, type "and" or "accept" at all and close the window. If you ask them to restart the pc, do it and that's it.
4.Start your phone in Fastboot mode; Switch off the phone and press the "vol-" key and without releasing it connect it to the PC until the Fastboot screen appears.
5. Unzip "INSTALL RECOVERY STOCK HUAWEI P8Lite - Method Per PC" and execute the file "INSTALL RECOVERY STOCK HUAWEI P8Lite.bat" and follow the steps.
It will not take more than 5 minutes, it's just a matter of pressing ENTER, that's it!
Files:
RECOVERY STOCK: https://mega.nz/#!6E90XIYL!pHYSFN_OJKFMSmDOOhu5yFVNmh4zhS1RribCuT-9QPI
ADB: https://mega.nz/#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
Method 2 By App:
[/ B]
1.Search in the Playstore App "Flashify", Download and Install.
2.Download the Recovery Stock.
3.Start the flashify app, drop root permissions and continue.
4.Press "recovery image"> "choose a file", select the scanner of your choice, search and select the Recovery stock you downloaded.
5. Click on "Yup", wait for the process to finish.
6.The App can be closed.
Files:
STOCK RECOVERY: https://mega.nz/#!OFsAEQqD!8qr6LOM4ND6u5GB6DVqhYxEIB7OAoOSF5iOouAmM5x8
Method 3 - Using PC - Manual Process:
1. Download and Unzip the file minimal_adb_fastboot_v1.3.1_setup.rar.
2. Run the minimal_adb_fastboot_v1.3.1_setup.exe program and complete the installation steps.
3. Go to the installation path of the program "C: \ Program Files (x86) \ Minimal ADB and Fastboot" (depending on your operating system may vary).
4. Copy the recovery file that you want to install to the path mentioned above. Example: "StockRecovery.img".
5. Start your Phone in Fastboot mode: Switch off the phone and press the "vol-" key and without releasing it, connect it to the PC until the Fastboot screen appears.
6. Run the program "MAF32.exe" (located in the installation path) with or without administrator permissions, a black window with the text "C: \ Program Files (x86) \ Minimal ADB and Fastboot" will appear.
7. Write the following commands without quotation marks and parentheses: "fastboot flash recovery (file name with its extension)".
Example: "fastboot flash recovery StockRecovery.img". (without quotation marks).
8. Press "Enter or Enter" key, it will not take 1 mn to install, once finished close the window, disconnect the Phone and Restart.
Files:
Minimal_adb_fastboot_v1.3.1_setup.rar: https://mega.nz/#!fYdV0C4Y!CkdeBxpgyEc09MdJ1-WWtvI48JwXoDBrpx_ohIzT4Jc
STOCK RECOVERY: https://mega.nz/#!OFsAEQqD!8qr6LOM4ND6u5GB6DVqhYxEIB7OAoOSF5iOouAmM5x8
That is all!
<< DRIVERS EXTRAS >>
Here I leave some Extras Drivers in case the previous one does not work, the installation of each one is very simple, you just have to "next" it and restart the PC if necessary.
Files: https://mega.nz/#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
Greetings from Mordor!
Huawei P8 Lite - Install TWRP Recovery (V2, V3.0.0, V3.0.2), Full System Backup, Android Root (5 & 6) and Return to Recovery Stock - April 27, 2017 Updated.
(Works both on Android 5 and 6 with models L21 and L23).
(HiSilicon Kirin 620 processor.)
DO THIS UNDER YOUR RESPONSIBILITY!
IMPORTANT!
-If you are not sure to do this tutorial better do not do it, there is no hurry so quiet.
<< INSTALL RECOVERY TWRP (V2, V3.0.0, V3.0.2) >>
There are 3 methods to do it, through PC or through an App, which is very simple, here I explain how:
Method 1 - Using PC - Automatic Process:
Instructions for both versions:
1. Download INSTALAR RECOVERY TWRP (V2, V3.0.0, V3.0.2) HUAWEI P8 LITE.rar
2. Download adb-setup-1.4.3.rar
3. Unzip adb-setup-1.4.3.rar and run the program. (This is to install adb drivers and the pc can detect the terminal.)
You will see a blue console screen, type "and" or "accept" at all and close the window. If you ask them to restart the pc, do it and that's it.
4.Start your phone in Fastboot mode; Switch off the phone and press the "vol-" key and without releasing it connect it to the PC until the Fastboot screen appears.
5. Unzip "INSTALL RECOVERY TWRP (V2, V3.0.0, V3.0.2) HUAWEI P8 LITE.rar" and run the file "INSTALL RECOVERY TWRP (V2, V3.0.0, V3.0.2) HUAWEI P8 LITE.bat" and Follow the steps
It will not take more than 5 minutes, it's just a matter of pressing ENTER, that's it!
Files:
TWRP V2: https://mega.nz/#!SZkzlQCb!iKBl1-6arjT6_9exrp9sc2aVzp7NnuKxECz6MVJ_Oms
TWRP V3.0.0: https://mega.nz/#!CZ91RQSA!B_kl3YPn7H38nbyG-5bVk2yt6qGDSsu3A2cnGysj7u4
TWRP V3.0.2: https://mega.nz/#!rFcX3TxC!89ePFv4x9iEvv22WCO-AUHjIDeFhKw4UUIuZ4d7p7LU
ADB: https://mega.nz/#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
Method 2 - By App:
Instructions for both versions:
1.Search in the Playstore App "Flashify", Download and Install.
2.Download the RecoveryTwrp (V2, V3.0.0, V3.0.2) .zip
3. Unzip RecoveryTwrp (V2, V3.0.0, V3.0.2) .zip.
4.Start the flashify app, drop root permissions and continue.
5.Press "recovery image"> "choose a file", select the scanner of your choice, search and select the Recovery that you downloaded.
6. Click on "Yup", wait for the process to finish.
7.The App can be closed.
Files:
TWRP V2: https://mega.nz/#!PBN0DAyD!NzWAX8Kn0ZtHftJZmf1_bir4OoppThMVwjP9Q6XXK9s
TWRP V3.0.0: https://mega.nz/#!LZtUnSDS!N2dFfxiK4ed5dplkt0o9lQAeAzLVgLVxgy0pXCYeOgw
TWRP V3.0.2: https://mega.nz/#!bNNRCBBY!UdXY6yWcoryK47SgV0352_JNfFLE0oIReaXDtqwWJaI
ADB: https://mega.nz/#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
Method 3 - Using PC - Manual Process:
Instructions for both versions:
1. Download and Unzip the file minimal_adb_fastboot_v1.3.1_setup.rar.
2. Run the minimal_adb_fastboot_v1.3.1_setup.exe program and complete the installation steps.
3. Go to the installation path of the program "C: \ Program Files (x86) \ Minimal ADB and Fastboot" (depending on your operating system may vary).
4. Copy the recovery file that you want to install to the path mentioned above. Example: "RecoveryTwrpV3.0.2.img".
5. Start your Phone in Fastboot mode: Switch off the phone and press the "vol-" key and without releasing it, connect it to the PC until the Fastboot screen appears.
6. Run the program "MAF32.exe" (located in the installation path) with or without administrator permissions, a black window with the text "C: \ Program Files (x86) \ Minimal ADB and Fastboot" will appear.
7. Write the following commands without quotation marks and parentheses: "fastboot flash recovery (file name with its extension)".
Example: "fastboot flash recovery RecoveryTwrpV3.0.2.img". (without quotation marks).
8. Press "Enter or Enter" key, it will not take 1 mn to install, once finished close the window, disconnect the Phone and Restart.
Files:
Minimal_adb_fastboot_v1.3.1_setup.rar: https://mega.nz/#!fYdV0C4Y!CkdeBxpgyEc09MdJ1-WWtvI48JwXoDBrpx_ohIzT4Jc
TWRP V2: https://mega.nz/#!PBN0DAyD!NzWAX8Kn0ZtHftJZmf1_bir4OoppThMVwjP9Q6XXK9s
TWRP V3.0.0: https://mega.nz/#!LZtUnSDS!N2dFfxiK4ed5dplkt0o9lQAeAzLVgLVxgy0pXCYeOgw
TWRP V3.0.2: https://mega.nz/#!bNNRCBBY!UdXY6yWcoryK47SgV0352_JNfFLE0oIReaXDtqwWJaI
*
And that's it!
<< BACKUP >>
Instructions:
1. Turn off the Computer, Start in Recovery Mode by pressing the keys (Vol + & Power) at the same time without releasing until you enter the Recovery.
2. At the start, for the first time, a text will appear in English which says:
("Keep System as Read Only"
TWRP can leave unmodified the system partition to make it easier for you to take official updates.
Installing zips or performing adb operations can modify the system partition).
Select "Swipe to Allow Modifications" so they can install Zips or Roms or do other operations.
3. Select "Backup".
4. Check the "Cache, Boot, Data, System" boxes.
5. Press "Select Stogare", choose "MicroSDCard".
6. Select "Swipe to Backup" and wait for the process to finish, the time will depend on the size of the backup, please be patient.
And that's it!
<< ROOT ANDROID (5 & 6) >>
Instructions:
1. Download the files and save them in the SD card.
2. Start the phone in Recovery TWRP. (Vol + & Power)
3. Select Install, search for the file "BETA-SuperSU-v2.62-20151210170034.zip", and press "swipe to install", wait for the process to finish.
4. Return to the "Install" menu, look for the file "BETA-SuperSU-v2.66-20160103015024.zip", and press "swipe to install", wait for the process to finish.
5. Reboot the system. (The phone will reboot 2 times do not worry).
And ready! That would be all!
If for some reason you brickea the phone, install (flash) this file UPDATE-unSU.zip, this will solve the problem.
Files:
1. BETA-SuperSU-v2.62: https://mega.nz/#!nJ9FXAjD!Jgelz-zLHtcITrkaA2_FpyS6CoK4fcNaPT-GD2ICsxA
2. BETA-SuperSU-v2.66: https://mega.nz/#!uNsxwIbB!AXQzZL67NTL_unnU4P3cE0p14Jc-tjATIYyvrYshTsQ
3. UPDATE-unSU: https://mega.nz/#!3ZMCBDpJ!Lj9Fc1YMIrz3pGLwO0EM72xF-58Vv46ZNE-esov2Rbg
<< INSTALL RECOVERY STOCK >>
There are 3 methods to do it, through PC or through an App, which is very simple, here I explain how:
Method 1 - Using PC - Automatic Process:
1. Download INSTALAR RECOVERY STOCK HUAWEI P8Lite - Method Per PC.
2. Download adb-setup-1.4.3.rar
3. Unzip adb-setup-1.4.3.rar and run the program. (This is to install adb drivers and the pc can detect the terminal.)
You will see a blue console screen, type "and" or "accept" at all and close the window. If you ask them to restart the pc, do it and that's it.
4.Start your phone in Fastboot mode; Switch off the phone and press the "vol-" key and without releasing it connect it to the PC until the Fastboot screen appears.
5. Unzip "INSTALL RECOVERY STOCK HUAWEI P8Lite - Method Per PC" and execute the file "INSTALL RECOVERY STOCK HUAWEI P8Lite.bat" and follow the steps.
It will not take more than 5 minutes, it's just a matter of pressing ENTER, that's it!
Files:
RECOVERY STOCK: https://mega.nz/#!6E90XIYL!pHYSFN_OJKFMSmDOOhu5yFVNmh4zhS1RribCuT-9QPI
ADB: https://mega.nz/#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
Method 2 By App:
[/ B]
1.Search in the Playstore App "Flashify", Download and Install.
2.Download the Recovery Stock.
3.Start the flashify app, drop root permissions and continue.
4.Press "recovery image"> "choose a file", select the scanner of your choice, search and select the Recovery stock you downloaded.
5. Click on "Yup", wait for the process to finish.
6.The App can be closed.
Files:
STOCK RECOVERY: https://mega.nz/#!OFsAEQqD!8qr6LOM4ND6u5GB6DVqhYxEIB7OAoOSF5iOouAmM5x8
Method 3 - Using PC - Manual Process:
1. Download and Unzip the file minimal_adb_fastboot_v1.3.1_setup.rar.
2. Run the minimal_adb_fastboot_v1.3.1_setup.exe program and complete the installation steps.
3. Go to the installation path of the program "C: \ Program Files (x86) \ Minimal ADB and Fastboot" (depending on your operating system may vary).
4. Copy the recovery file that you want to install to the path mentioned above. Example: "StockRecovery.img".
5. Start your Phone in Fastboot mode: Switch off the phone and press the "vol-" key and without releasing it, connect it to the PC until the Fastboot screen appears.
6. Run the program "MAF32.exe" (located in the installation path) with or without administrator permissions, a black window with the text "C: \ Program Files (x86) \ Minimal ADB and Fastboot" will appear.
7. Write the following commands without quotation marks and parentheses: "fastboot flash recovery (file name with its extension)".
Example: "fastboot flash recovery StockRecovery.img". (without quotation marks).
8. Press "Enter or Enter" key, it will not take 1 mn to install, once finished close the window, disconnect the Phone and Restart.
Files:
Minimal_adb_fastboot_v1.3.1_setup.rar: https://mega.nz/#!fYdV0C4Y!CkdeBxpgyEc09MdJ1-WWtvI48JwXoDBrpx_ohIzT4Jc
STOCK RECOVERY: https://mega.nz/#!OFsAEQqD!8qr6LOM4ND6u5GB6DVqhYxEIB7OAoOSF5iOouAmM5x8
That is all!
<< DRIVERS EXTRAS >>
Here I leave some Extras Drivers in case the previous one does not work, the installation of each one is very simple, you just have to "next" it and restart the PC if necessary.
Files: https://mega.nz/#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
Greetings from Mordor!
Last edited:
