[ROM][P769] PenberRom5 [11/21/2013 - AROMA Edition)

Search This thread

leolawliet

Senior Member
Aug 7, 2011
3,441
1,631
New York, NY
www.facebook.com
LeoLawliet presents..

- PenberRom5 -

Fine tuned and tweaked for better battery life, performance, smoothness, and responsiveness










This ROM is mainly based on PenberRom2, which I started working on at CM Forums.
To be honest the main difference between the two is PenberRom2 was based on PACman ICS 4.0.4, while PenberRom5 is based on PACman JB 4.3.
Other than that, the whole idea behind both ROMs is the same, a custom ROM based on my preference and what enhancements I use.
It's already tweaked and fine tuned, I saved you all the trouble of having to do it yourselves :p




Here's a list of what has been added:

  • Smart Launcher included
  • Replaced DSP Manager with ViPER4Android FX
  • Supercharged services.jar (launcher stays in memory + better multitasking)
  • boost in performance
  • swap2cache terminal script creates a 64mb swapfile in /cache with swappiness set to 40
  • swap2data terminal script creates a 128mb swapfile in /data with swappiness set to 40
  • increased responsiveness
  • better battery life
  • faster boot
  • zipalign apk's on boot
  • defrag databases on boot
  • entropy tweak
  • I/O scheduler tweaks
  • sleeper tweaks
  • hardware rendering tweaks
  • improved sdcard read/write speed
  • disables logger
  • disables journalism
  • disables vsync
  • ADJ tweaks
  • vm tweaks
  • ram tweaks
  • graphics rendering tweaks
  • video/music streaming tweaks
  • various useful terminal scripts (I'll mark those down)
  • custom bootanimation + UI sounds
  • increased jpeg + video recording quality
  • 3D performance enhancement tweaks
  • call tweaks
  • scripts to clean database & zipalign apps
  • cpuramcheck script to monitor CPU/RAM usage in realtime using the terminal emulator
  • Stabilized FPS through a build.prop tweak (kinda risky, comment out if you have graphic glitches. Thanks LENAROX!!)

As usual, I will leave a disclaimer. I will NOT be held responsible if this causes any damage to your device,
you are responsible for making a nandroid backup in the case that a bootloop occurs.


Credit goes out to these guys
  • AntonX - for CM10.2 ROM
  • mateo1111 - for PACrom JB 4.3 ROM
  • twinnfamous - for porting PACrom JB 4.3 with everything fully working, it's the base ROM I'm using
  • Pizza_Dox - for gm & hc scripts, 02SDCardAccel, 97ramscript, 20vmlt, 82Sleepers, RNGD, Cache_Cleaner
  • ViPER520 and zhuhang - for ViPER4Android FX
  • Chainfire - for some scripts. 01-GPU_touchrender, libncurses.so
  • ImbaWind - for Adrenaline Boost script
  • Spex - for some build.prop edits and some code from his startup scripts, I started out with his collection of tweaks
  • zeppelinrox - for services.jar patcher & terminal scripts. [vac, zepalign]
  • LENAROX - you made the cpuramcheck script possible, and you are also responsible for 20vmlt. Thanks :)
  • The rest I honestly don't remember but if you feel that you deserve credit, message me and I will give you proper credit where it should be given.
  • kuma82 - for the 90kuma script & WiFi fix :) (only needed in older builds, twinnfamous fixed the bug)
  • artit - for AROMA Installer base setup

And once again because I can't tell you how annoying it is for someone to screw up their own device for not following instructions carefully and then blame someone else..
I will NOT be held responsible if this causes any damage to your device, you are responsible for making a nandroid backup in the case that a bootloop occurs.


Enjoy :D
 
Last edited:

leolawliet

Senior Member
Aug 7, 2011
3,441
1,631
New York, NY
www.facebook.com
Downloads

HOW TO INSTALL:
Code:
* Download the Rom and Gapps

* Reboot to Recovery

* Wipe data/factory reset

* Wipe system

* Flash the ROM and then Gapps

* Reboot your phone

* Enjoy

____________________________________________________________________________________________​

HOW TO UPDATE:
Code:
* Download the latest version

* Reboot to Recovery

* Wipe dalvik cache and cache

* Wipe system

* Flash the ROM and then Gapps

* Reboot your phone

* And enjoy the latest version of PAC


____________________________________________________________________________________________​


DOWNLOADS

============================================================
ROM
============================================================​

Code:
[B][COLOR="Green"]11/21/2013[/COLOR][/B]
[B]Mirror #1[/B] [URL="http://d-h.st/9Rj"]Dev-Host[/URL] (Please use this mirror)

[B][COLOR="Green"]11/14/2013[/COLOR][/B]
[B]Mirror #1[/B] [URL="http://d-h.st/7z4"]Dev-Host[/URL] (Please use this mirror)

[B][COLOR="Green"]10/31/2013[/COLOR][/B]
[B]Mirror #1[/B]: [URL="http://d-h.st/6x1"]Dev-Host[/URL] (please use this mirror)

[B][COLOR="Green"]10/19/2013[/COLOR][/B]
[B]Mirror #1[/B]: [url="https://app.box.com/s/061mnjqso4p3g69ztj45"]Box[/url] (please use this mirror)

[B]Mirror #2[/B]: [URL="https://db.tt/DlWpG2oo"]Dropbox[/URL] (thanks DjSidEShoW)

============================================================
Google Apps & Add-ons
============================================================​

Code:
[B]Slim AROMA Gapps[/B]: Get it [URL="http://www.slimroms.net/index.php/downloads/dlsearch/viewdownload/383-addons/6370-slim-aroma-selectable-gapps-4-3-build-2"]here.[/URL] 
Install what you want, you have that option now

[B]UltraSlim Gapps[/B]: [URL="http://d-h.st/users/ronin79/?fld_id=27074#files"]here[/URL]. 
Only 11mb, no extra clutter

[B]IRS Starter Pack[/B]: for ViPER4Android FX. Get the latest files [URL="http://xdaforums.com/showthread.php?t=2216193"]here[/URL]. 
(optional)

[B]Google Home Add-on[/B]: Get it [URL="http://d-h.st/TJ8"]here[/URL].
I recommend you install Gapps first.
 
Last edited:

leolawliet

Senior Member
Aug 7, 2011
3,441
1,631
New York, NY
www.facebook.com
Misc./Discontinued

LeoLawliet presents..
- PenberEngine -
Tweaks for everyday use



These tweaks are already included in PenberRom5,
This is just for anyone who wishes to have the additional tweaks for a different device.



- Download -
10/06/2013



- build.prop tweaks -
Also included already, use on whatever ROM you like

Code:
### LeoLawliet's new tweaks 9/15/2013 ###

# Misc Tweaks
debug.gr.swapinterval=0
debug.performance.tuning=1
dev.pm.dyn_samplingrate=1
persist.adb.notify=0
persist.service.adb.enable=1
persist.sys.use_dithering=1
persist.sys.purgeable_assets=1
qemu.hw.mainkeys=0
ro.min_pointer_dur=1
ro.sec.proximity.delay=0
sys.mem.max_hidden_apps=15

# Battery Tweaks
pm.sleep_mode=1
ro.ril.disable.power.collapse=1

# Unlocks Screen using Menu Button
ro.config.hw_menu_unlockscreen=true

# Kernel Tweaks
ro.kernel.checkjni=0

# Ram Tweaks
persist.sys.purgeable_assets=1

# Kills Loging
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1

# Media Streaming Optimizations
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true

# Camera & Media Tweaks
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.dec.jpeg.memcap=20000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=75
ro.media.enc.jpeg.quality=100
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=25
ro.media.codec_priority_for_thumb=so

# CM9 Tweaks
hwui.disable_vsync=true
hwui.render_dirty_regions=false

# Voice Optimization
ro.ril.enable.amr.wideband

# Better Telephony Settings
ro.config.vc_call_vol_steps=15
ro.config.vc_call_steps=20
ro.telephony.call_ring.delay=0
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0

# Google DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4

# TCP Tweaks (might break WiFi)
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960

# Wireless Conection Tweaks (might break WiFi)
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 187000

# 3d performance 
persist.android.strictmode=0 
ro.min_pointer_dur=1 
ro.secure=0

# 16BIT Support
debug.fb.rgb565=1

# 16BIT Transparency
persist.sys.use_16bpp_alpha=1

# Graphic Tweaks
ro.product.gpu.driver=1
debug.gr.swapinterval=0

# Better scrolling responsiveness
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000 
ro.min.fling_velocity=8000

# Better Touch Responsiveness
touch.presure.scale=0.001

# Dalvik Tweaks
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.dexopt-flags=m=y,v=n,o=n
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.lockprof.threshold=500
dalvik.vm.execution-mode=int:jit
dalvik.vm.jmiopts=forcecopy
dalvik.vm.dexopt-data-only=1

# Enable Qualcomm tile rendering (Hardware Rendering)
debug.enabletr=1
persist.sys.composition.type=gpu 

# enable harware egl profile 
debug.egl.profiler=1

# FPs Booster
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20

# Graphic Optimization
debug.gr.numframebuffers=3
ro.min_pointer_dur=1

# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1

# Nitro Lagg Nullifier
ENFORCE_PROCESS_LIMIT=false
MAX_SERVICE_INACTIVITY=false
MIN_HIDDEN_APPS=false
MAX_HIDDEN_APPS=false
CONTENT_APP_IDLE_OFFSET=false
EMPTY_APP_IDLE_OFFSET=false
MAX_ACTIVITIES=false
ACTIVITY_INACTIVE_RESET_TIME=false
MAX_RECENT_TASKS=false
MIN_RECENT_TASKS=false
APP_SWITCH_DELAY_TIME=false
MAX_PROCESSES=false
PROC_START_TIMEOUT=false
CPU_MIN_CHECK_DURATION=false
GC_TIMEOUT=false
SERVICE_TIMEOUT=false
MIN_CRASH_INTERVAL=false

# Pro-Tuned ADJ 1.2 by LENAROX.
ro.FOREGROUND_APP_ADJ=0
ro.VISIBLE_APP_ADJ=4
ro.PERCEPTIBLE_APP_ADJ=3
ro.HEAVY_WEIGHT_APP_ADJ=2
ro.SECONDARY_SERVER_ADJ=1
ro.BACKUP_APP_ADJ=5
ro.HOME_APP_ADJ=6
ro.HIDDEN_APP_MIN_ADJ=7
ro.EMPTY_APP_ADJ=15
#Ultimate Assassin Mode!
#ro.SECONDARY_SERVER_ADJ=15
#ro.HIDDEN_APP_MIN_ADJ=3

# Qualcomm Display Settings (Qualcomm devices ONLY!!)
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1

# Rapid Boot Technology 1.1 (Reduces bootup time)
persist.sys.shutdown.mode=hibernate
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true

# Rendering Tweaks
debug.composition.type=c2d
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1

# Sensor Sleep Control
ro.ril.sensor.sleep.control=1

# Smoothens UI
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0

### End of LeoLawliet's new tweaks 9/15/2013 ###
 
Last edited:

leolawliet

Senior Member
Aug 7, 2011
3,441
1,631
New York, NY
www.facebook.com

It's basically PACrom JB 4.2.2 but heavily modified. It looks exactly the same.

I still need to add the finishing touches before anything. I should have it done and uploaded within the next few hours.

Edit: Uploaded and posted, check the 2nd post.

Edit2: Don't download yet, it bootloops and I know why. I'll fix it right now.
 
Last edited:

leolawliet

Senior Member
Aug 7, 2011
3,441
1,631
New York, NY
www.facebook.com
Why did You upload this without testing? BTW, Your engine is preety nice, it really boost my phone, can i add some of tweaks to my rom? :3

unn.

I did test it, I guess it's just having issues with the latest CM10.1 lol

My apologies guys, I'm gonna make this right. And glad you like the engine tweaks, yes you may use them but please link back to the engine post and give credit :)

These tweaks work 100% flawless on PenberRom5, I may just release that instead.

Sent from my LG-P769 running PACrom JB 4.3 using Tapatalk 2
 

twinnfamous

Senior Member
May 31, 2012
1,319
746
sacramento
Still working on it, I'll give you guys an update when it's working. I'm sorry, the new tweaks aren't doing so well. I might as well revert to the old ones that did work for now.

Edit: Annnndddd it works!! :D

Uploading at the moment.

Tweaks work great. I added the build prop ones first and notice improvement in antutu. So I went ahead and flashed pender engine tweaks and that made it even better. I dont use no-frills CPU tuner because the port im running has performance app built in settings with overclocking options. This is great my pac4.3 port is running greater than before. And the sounds u added to the touch is cool. I havent tried the launcher yet. Thank you for these tweaks.
 
Last edited:

leolawliet

Senior Member
Aug 7, 2011
3,441
1,631
New York, NY
www.facebook.com
My last Benchmark score

By the way, ROM released :)

Sent from my LG-P769 running PenberRom5 using Tapatalk 2
 

Attachments

  • uploadfromtaptalk1378157928054.jpg
    uploadfromtaptalk1378157928054.jpg
    51 KB · Views: 543
Last edited:
  • Like
Reactions: Dr.Molestratus

t.d

Member
Sep 8, 2010
41
6
Disabled logger, disables journalism? What are these?

Sent from my LG-P769 using Tapatalk 4
 

optimusl9

Member
Jan 28, 2013
28
3
Looks like a good ROM with all those features... have you encountered any bugs or problems so far?

Also, your download link gives an error "The user hosting this content is out of bandwidth."
 
Last edited:

leolawliet

Senior Member
Aug 7, 2011
3,441
1,631
New York, NY
www.facebook.com
Looks like a good ROM with all those features... have you encountered any bugs or problems so far?

Also, your download link gives an error "The user hosting this content is out of bandwidth."

That means my bandwidth limit was exceeded, too many downloads. I'm working on a new build probably tonight at work. Much better optimizations, this is my last benchmark :)

Sent from my LG Optimus L9 running PenberRom5 using Tapatalk 2
 

Attachments

  • uploadfromtaptalk1378599298320.jpg
    uploadfromtaptalk1378599298320.jpg
    48.9 KB · Views: 324
  • Like
Reactions: Kid_Ding

optimusl9

Member
Jan 28, 2013
28
3
That means my bandwidth limit was exceeded, too many downloads. I'm working on a new build probably tonight at work. Much better optimizations, this is my last benchmark :)

Sent from my LG Optimus L9 running PenberRom5 using Tapatalk 2

Good to hear. Please excuse me while I try the painful, stabbing myself with a knife process of unlocking the bootloader on P769. Be right back... by tomorrow... I hope.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 13
    LeoLawliet presents..

    - PenberRom5 -

    Fine tuned and tweaked for better battery life, performance, smoothness, and responsiveness










    This ROM is mainly based on PenberRom2, which I started working on at CM Forums.
    To be honest the main difference between the two is PenberRom2 was based on PACman ICS 4.0.4, while PenberRom5 is based on PACman JB 4.3.
    Other than that, the whole idea behind both ROMs is the same, a custom ROM based on my preference and what enhancements I use.
    It's already tweaked and fine tuned, I saved you all the trouble of having to do it yourselves :p




    Here's a list of what has been added:

    • Smart Launcher included
    • Replaced DSP Manager with ViPER4Android FX
    • Supercharged services.jar (launcher stays in memory + better multitasking)
    • boost in performance
    • swap2cache terminal script creates a 64mb swapfile in /cache with swappiness set to 40
    • swap2data terminal script creates a 128mb swapfile in /data with swappiness set to 40
    • increased responsiveness
    • better battery life
    • faster boot
    • zipalign apk's on boot
    • defrag databases on boot
    • entropy tweak
    • I/O scheduler tweaks
    • sleeper tweaks
    • hardware rendering tweaks
    • improved sdcard read/write speed
    • disables logger
    • disables journalism
    • disables vsync
    • ADJ tweaks
    • vm tweaks
    • ram tweaks
    • graphics rendering tweaks
    • video/music streaming tweaks
    • various useful terminal scripts (I'll mark those down)
    • custom bootanimation + UI sounds
    • increased jpeg + video recording quality
    • 3D performance enhancement tweaks
    • call tweaks
    • scripts to clean database & zipalign apps
    • cpuramcheck script to monitor CPU/RAM usage in realtime using the terminal emulator
    • Stabilized FPS through a build.prop tweak (kinda risky, comment out if you have graphic glitches. Thanks LENAROX!!)

    As usual, I will leave a disclaimer. I will NOT be held responsible if this causes any damage to your device,
    you are responsible for making a nandroid backup in the case that a bootloop occurs.


    Credit goes out to these guys
    • AntonX - for CM10.2 ROM
    • mateo1111 - for PACrom JB 4.3 ROM
    • twinnfamous - for porting PACrom JB 4.3 with everything fully working, it's the base ROM I'm using
    • Pizza_Dox - for gm & hc scripts, 02SDCardAccel, 97ramscript, 20vmlt, 82Sleepers, RNGD, Cache_Cleaner
    • ViPER520 and zhuhang - for ViPER4Android FX
    • Chainfire - for some scripts. 01-GPU_touchrender, libncurses.so
    • ImbaWind - for Adrenaline Boost script
    • Spex - for some build.prop edits and some code from his startup scripts, I started out with his collection of tweaks
    • zeppelinrox - for services.jar patcher & terminal scripts. [vac, zepalign]
    • LENAROX - you made the cpuramcheck script possible, and you are also responsible for 20vmlt. Thanks :)
    • The rest I honestly don't remember but if you feel that you deserve credit, message me and I will give you proper credit where it should be given.
    • kuma82 - for the 90kuma script & WiFi fix :) (only needed in older builds, twinnfamous fixed the bug)
    • artit - for AROMA Installer base setup

    And once again because I can't tell you how annoying it is for someone to screw up their own device for not following instructions carefully and then blame someone else..
    I will NOT be held responsible if this causes any damage to your device, you are responsible for making a nandroid backup in the case that a bootloop occurs.


    Enjoy :D
    5
    Misc./Discontinued

    LeoLawliet presents..
    - PenberEngine -
    Tweaks for everyday use



    These tweaks are already included in PenberRom5,
    This is just for anyone who wishes to have the additional tweaks for a different device.



    - Download -
    10/06/2013



    - build.prop tweaks -
    Also included already, use on whatever ROM you like

    Code:
    ### LeoLawliet's new tweaks 9/15/2013 ###
    
    # Misc Tweaks
    debug.gr.swapinterval=0
    debug.performance.tuning=1
    dev.pm.dyn_samplingrate=1
    persist.adb.notify=0
    persist.service.adb.enable=1
    persist.sys.use_dithering=1
    persist.sys.purgeable_assets=1
    qemu.hw.mainkeys=0
    ro.min_pointer_dur=1
    ro.sec.proximity.delay=0
    sys.mem.max_hidden_apps=15
    
    # Battery Tweaks
    pm.sleep_mode=1
    ro.ril.disable.power.collapse=1
    
    # Unlocks Screen using Menu Button
    ro.config.hw_menu_unlockscreen=true
    
    # Kernel Tweaks
    ro.kernel.checkjni=0
    
    # Ram Tweaks
    persist.sys.purgeable_assets=1
    
    # Kills Loging
    ro.config.htc.nocheckin=1
    ro.config.nocheckin=1
    profiler.force_disable_ulog=1
    profiler.force_disable_err_rpt=1
    
    # Media Streaming Optimizations
    media.stagefright.enable-player=true
    media.stagefright.enable-meta=true
    media.stagefright.enable-scan=true
    media.stagefright.enable-http=true
    media.stagefright.enable-aac=true
    media.stagefright.enable-qcp=true
    media.stagefright.enable-record=true
    
    # Camera & Media Tweaks
    ro.media.enc.jpeg.quality=100
    ro.media.dec.jpeg.memcap=8000000
    ro.media.dec.jpeg.memcap=20000000
    ro.media.enc.hprof.vid.bps=8000000
    ro.media.enc.hprof.vid.fps=75
    ro.media.enc.jpeg.quality=100
    ro.media.dec.aud.wma.enabled=1
    ro.media.dec.vid.wmv.enabled=1
    ro.media.cam.preview.fps=25
    ro.media.codec_priority_for_thumb=so
    
    # CM9 Tweaks
    hwui.disable_vsync=true
    hwui.render_dirty_regions=false
    
    # Voice Optimization
    ro.ril.enable.amr.wideband
    
    # Better Telephony Settings
    ro.config.vc_call_vol_steps=15
    ro.config.vc_call_steps=20
    ro.telephony.call_ring.delay=0
    ring.delay=0
    ro.lge.proximity.delay=25
    mot.proximity.delay=25
    ro.mot.buttonlight.timeout=0
    
    # Google DNS
    net.dns1=8.8.8.8
    net.dns2=8.8.4.4
    net.rmnet0.dns1=8.8.8.8
    net.rmnet0.dns2=8.8.4.4
    
    # TCP Tweaks (might break WiFi)
    net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
    net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
    net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
    net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
    net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
    net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
    net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
    
    # Wireless Conection Tweaks (might break WiFi)
    net.ipv4.ip_no_pmtu_disc=0
    net.ipv4.route.flush=1
    net.ipv4.tcp_ecn=0
    net.ipv4.tcp_fack=1
    net.ipv4.tcp_mem=187000 187000 187000
    net.ipv4.tcp_moderate_rcvbuf=1
    net.ipv4.tcp_no_metrics_save=1
    net.ipv4.tcp_rfc1337=1
    net.ipv4.tcp_rmem=4096 39000 187000
    net.ipv4.tcp_sack=1
    net.ipv4.tcp_timestamps=1
    net.ipv4.tcp_window_scaling=1
    net.ipv4.tcp_wmem=4096 39000 187000
    
    # 3d performance 
    persist.android.strictmode=0 
    ro.min_pointer_dur=1 
    ro.secure=0
    
    # 16BIT Support
    debug.fb.rgb565=1
    
    # 16BIT Transparency
    persist.sys.use_16bpp_alpha=1
    
    # Graphic Tweaks
    ro.product.gpu.driver=1
    debug.gr.swapinterval=0
    
    # Better scrolling responsiveness
    windowsmgr.max_events_per_sec=90
    ro.max.fling_velocity=12000 
    ro.min.fling_velocity=8000
    
    # Better Touch Responsiveness
    touch.presure.scale=0.001
    
    # Dalvik Tweaks
    dalvik.vm.heapstartsize=8m
    dalvik.vm.heapgrowthlimit=64m
    dalvik.vm.heapsize=256m
    dalvik.vm.dexopt-flags=m=y,v=n,o=n
    dalvik.vm.stack-trace-file=/data/anr/traces.txt
    dalvik.vm.lockprof.threshold=500
    dalvik.vm.execution-mode=int:jit
    dalvik.vm.jmiopts=forcecopy
    dalvik.vm.dexopt-data-only=1
    
    # Enable Qualcomm tile rendering (Hardware Rendering)
    debug.enabletr=1
    persist.sys.composition.type=gpu 
    
    # enable harware egl profile 
    debug.egl.profiler=1
    
    # FPs Booster
    persist.sys.NV_FPSLIMIT=60
    persist.sys.NV_POWERMODE=1
    persist.sys.NV_PROFVER=15
    persist.sys.NV_STEREOCTRL=0
    persist.sys.NV_STEREOSEPCHG=0
    persist.sys.NV_STEREOSEP=20
    
    # Graphic Optimization
    debug.gr.numframebuffers=3
    ro.min_pointer_dur=1
    
    # Hardware 2D & 3D Rendering
    hw3d.force=1
    hw2d.force=1
    
    # Nitro Lagg Nullifier
    ENFORCE_PROCESS_LIMIT=false
    MAX_SERVICE_INACTIVITY=false
    MIN_HIDDEN_APPS=false
    MAX_HIDDEN_APPS=false
    CONTENT_APP_IDLE_OFFSET=false
    EMPTY_APP_IDLE_OFFSET=false
    MAX_ACTIVITIES=false
    ACTIVITY_INACTIVE_RESET_TIME=false
    MAX_RECENT_TASKS=false
    MIN_RECENT_TASKS=false
    APP_SWITCH_DELAY_TIME=false
    MAX_PROCESSES=false
    PROC_START_TIMEOUT=false
    CPU_MIN_CHECK_DURATION=false
    GC_TIMEOUT=false
    SERVICE_TIMEOUT=false
    MIN_CRASH_INTERVAL=false
    
    # Pro-Tuned ADJ 1.2 by LENAROX.
    ro.FOREGROUND_APP_ADJ=0
    ro.VISIBLE_APP_ADJ=4
    ro.PERCEPTIBLE_APP_ADJ=3
    ro.HEAVY_WEIGHT_APP_ADJ=2
    ro.SECONDARY_SERVER_ADJ=1
    ro.BACKUP_APP_ADJ=5
    ro.HOME_APP_ADJ=6
    ro.HIDDEN_APP_MIN_ADJ=7
    ro.EMPTY_APP_ADJ=15
    #Ultimate Assassin Mode!
    #ro.SECONDARY_SERVER_ADJ=15
    #ro.HIDDEN_APP_MIN_ADJ=3
    
    # Qualcomm Display Settings (Qualcomm devices ONLY!!)
    com.qc.hardware=1
    debug.qc.hardware=true
    debug.qctwa.preservebuf=1
    debug.qctwa.statusbar=1
    
    # Rapid Boot Technology 1.1 (Reduces bootup time)
    persist.sys.shutdown.mode=hibernate
    ro.config.hw_fast_dormancy=1
    ro.config.hw_quickpoweron=true
    
    # Rendering Tweaks
    debug.composition.type=c2d
    debug.egl.hw=1
    debug.enabletr=true
    debug.overlayui.enable=1
    debug.qctwa.preservebuf=1
    debug.performance.tuning=1
    debug.sf.hw=1
    dev.pm.dyn_samplingrate=1
    hw3d.force=1
    ro.config.disable.hw_accel=false
    ro.fb.mode=1
    ro.sf.compbypass.enable=0
    ro.vold.umsdirtyratio=20
    persist.sys.composition.type=c2d
    persist.sys.ui.hw=1
    video.accelerate.hw=1
    
    # Sensor Sleep Control
    ro.ril.sensor.sleep.control=1
    
    # Smoothens UI
    persist.service.lgospd.enable=0
    persist.service.pcsync.enable=0
    
    ### End of LeoLawliet's new tweaks 9/15/2013 ###
    4
    Downloads

    HOW TO INSTALL:
    Code:
    * Download the Rom and Gapps
    
    * Reboot to Recovery
    
    * Wipe data/factory reset
    
    * Wipe system
    
    * Flash the ROM and then Gapps
    
    * Reboot your phone
    
    * Enjoy

    ____________________________________________________________________________________________​

    HOW TO UPDATE:
    Code:
    * Download the latest version
    
    * Reboot to Recovery
    
    * Wipe dalvik cache and cache
    
    * Wipe system
    
    * Flash the ROM and then Gapps
    
    * Reboot your phone
    
    * And enjoy the latest version of PAC


    ____________________________________________________________________________________________​


    DOWNLOADS

    ============================================================
    ROM
    ============================================================​

    Code:
    [B][COLOR="Green"]11/21/2013[/COLOR][/B]
    [B]Mirror #1[/B] [URL="http://d-h.st/9Rj"]Dev-Host[/URL] (Please use this mirror)
    
    [B][COLOR="Green"]11/14/2013[/COLOR][/B]
    [B]Mirror #1[/B] [URL="http://d-h.st/7z4"]Dev-Host[/URL] (Please use this mirror)
    
    [B][COLOR="Green"]10/31/2013[/COLOR][/B]
    [B]Mirror #1[/B]: [URL="http://d-h.st/6x1"]Dev-Host[/URL] (please use this mirror)
    
    [B][COLOR="Green"]10/19/2013[/COLOR][/B]
    [B]Mirror #1[/B]: [url="https://app.box.com/s/061mnjqso4p3g69ztj45"]Box[/url] (please use this mirror)
    
    [B]Mirror #2[/B]: [URL="https://db.tt/DlWpG2oo"]Dropbox[/URL] (thanks DjSidEShoW)

    ============================================================
    Google Apps & Add-ons
    ============================================================​

    Code:
    [B]Slim AROMA Gapps[/B]: Get it [URL="http://www.slimroms.net/index.php/downloads/dlsearch/viewdownload/383-addons/6370-slim-aroma-selectable-gapps-4-3-build-2"]here.[/URL] 
    Install what you want, you have that option now
    
    [B]UltraSlim Gapps[/B]: [URL="http://d-h.st/users/ronin79/?fld_id=27074#files"]here[/URL]. 
    Only 11mb, no extra clutter
    
    [B]IRS Starter Pack[/B]: for ViPER4Android FX. Get the latest files [URL="http://xdaforums.com/showthread.php?t=2216193"]here[/URL]. 
    (optional)
    
    [B]Google Home Add-on[/B]: Get it [URL="http://d-h.st/TJ8"]here[/URL].
    I recommend you install Gapps first.
    3
    Still working on it, I'll give you guys an update when it's working. I'm sorry, the new tweaks aren't doing so well. I might as well revert to the old ones that did work for now.

    Edit: Annnndddd it works!! :D

    Uploading at the moment.
    3
    Why did You upload this without testing? BTW, Your engine is preety nice, it really boost my phone, can i add some of tweaks to my rom? :3

    unn.

    I did test it, I guess it's just having issues with the latest CM10.1 lol

    My apologies guys, I'm gonna make this right. And glad you like the engine tweaks, yes you may use them but please link back to the engine post and give credit :)

    These tweaks work 100% flawless on PenberRom5, I may just release that instead.

    Sent from my LG-P769 running PACrom JB 4.3 using Tapatalk 2