[KERNEL][TW][KITKAT][N900T] | ColonelX(B) R24 | 3.4.x | - 8|28|14

Search This thread

itsmikeramsay

Senior Member
Mar 25, 2009
5,343
12,239
Atlanta


Code:
#include <std_disclaimer.h>
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this kernel
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */

colnelxbanner_zps0f2ae845.png

Kernel Status: STABLE


COLONEL-X(B) FEATURES:

GENERAL:

  • N900TUVUDNF4 Base
  • Linux Kernel Updates: 3.4.103
  • Linaro 4.9.1
  • SELinux: Permissive
  • Built with NEON VFP optimization flags
  • File Systems: exFAT, FAT, NFS, NTFS, F2FS
  • SWAP: swap, frontswap, zswap, znswap
  • USB Mass Storage
  • XZ Compression
  • xConfig (Inspired by Imoseyon's lkconfig)
  • Google's Snappy Compression/Decompression Library
  • Vmalloc Savings


EXTRAS:

  • Synapse - AndreiF & apbaxel
  • USB FastCharge - yank555-lu
  • MDNIE Lite Controls - yank555-lu
  • LED Extended Controls - yank555-lu
  • Battery Life Extender (BLX) - Ezekeel
  • MSM-Hotplug - myfluxi
  • Intelliplug - faux123
  • Faux Sound - faux123
  • Bricked MPDecision - show1984
  • KThermal - Ktoonsez


GOVERNORS & SCHEDULERS, ETC:

  • Overclocked: 2.8GHz
  • OC'd L2 and Bus Bandwidth
  • Custom Voltage Table - Imoseyon
  • Voltage Minimum: 600mv
  • CPU Hardlimit 2.0 (Yank555)
  • Conservative
  • InteractiveX - Imoseyon
  • BFQ Scheduler - ayysir
  • FIOPS Scheduler - Doomlord
  • SIO Scheduler - Doomlord
  • VR Scheduler
  • ZEN Scheduler - Brandon Berhent (No username)
  • Simple GPU Gov - faux123
  • Disabled Userspace Governor



ColonelX(B) R24 Changelog

Code:
Rebased on Kitkat Build NF9
Thermal: Add Intellithermal V2
Thermal: Removed KThermal
Driver: Add Sweep2Wake and Sweep2Sleep
CPUFreq: Some changes to Smartmax
Driver: Add Custom Vibration tool



Version: R24 ColonelX | ColonelXB


Download: Old Builds


Source (Updated on Stable releases)


XDA:DevDB Information
ColonelX, Kernel for the T-Mobile Samsung Galaxy Note 3

Contributors
itsmikeramsay, itsmikeramsay
Kernel Special Features: Listed above

Version Information
Status: Stable
Current Stable Version: R24
Stable Release Date: 2014-09-19
Beta Release Date: 2014-04-09

Created 2013-11-23
Last Updated 2014-09-25
 
Last edited:

itsmikeramsay

Senior Member
Mar 25, 2009
5,343
12,239
Atlanta
[KERNEL][AOSP][N900X] | ColonelAX R11 | 3GHz | 3.4.80 | Much More!! - 2|17|14

DISREGARD THIS POST, WIP FOR ColonelAX!!!


ColonelXLogo_zpsa78f7f96.png

Kernel Status: BETA


COLONEL-AX FEATURES:

GENERAL:

  • Supports Unified Source by CyanogenMod
  • Linux Kernel Updates: 3.4.82
  • GCC 4.8.3
  • SELinux: Permissive
  • Built with NEON VFP optimization flags
  • File Systems: exFAT, FAT, NFS, NTFS
  • SWAP: swap, frontswap, zswap, znswap
  • USB Mass Storage
  • LZO Compression (Bigger file, but boots much faster)
  • Ultra Kernel Same-page Merging (UKSM) - jasmison904
  • xConfig (Inspired by Imoseyon's lkconfig)
  • Google's Snappy Compression/Decompression Library
  • Vmalloc Savings


EXTRAS:

  • USB FastCharge - yank555-lu
  • MDNIE Lite Controls - yank555-lu
  • LED Extended Controls - yank555-lu
  • TouchWake Finger/S-Pen - yank555-lu - Note1
  • Battery Life Extender (BLX) - Ezekeel
  • Bricked Mpdecision - show1978
  • FK Thermal - franciscofranco
  • Intelliplug - faux123
  • Intellithermal - faux123

Note1: Touchwake disables when you hit the power button to turn off display. YOU MUST let the screen timeout and turn off itself in order for touchwake to work for the set delay time you have configured!!


GOVERNORS & SCHEDULERS, ETC:

  • Overclocked: 3.01GHz (3GHz)
  • Underclocked: 96MHz
  • OC'd L2 and Bus Bandwidth
  • Custom Voltage Table - Imoseyon
  • Voltage Minimum: 600mv
  • ConservativeX
  • InteractiveX - Imoseyon
  • Intelliactive - faux123
  • Intellidemand - faux123
  • OndemandX - Imoseyon
  • OnDemandPLUS - boype
  • PegasusQ - ByungChang
  • Smartmax - maxwen
  • Smartmax_eps - maxwen
  • SmartassV2 - erasmux
  • WheatleyX - Based on Wheatley (Ezekeel)
  • BFQ Scheduler - ayysir
  • FIOPS Scheduler - Doomlord
  • SIO Scheduler - Doomlord
  • SIOPLUS Scheduler - boype
  • VR Scheduler
  • ZEN Scheduler - Brandon Berhent (No username)
  • Simple GPU Gov - faux123
  • Disabled Userspace & Powersave Governors



Colonel-AX R11 Changelog

Code:
Initial Release!!



Download: N900X - R11
 
Last edited:

itsmikeramsay

Senior Member
Mar 25, 2009
5,343
12,239
Atlanta
Well not true because my phone won't handle 2.96GHz at all it crashes and it crashed as well as soon as I put it to 1202mV to try to make it stable.

Sent from my SM-N900T using xda app-developers app

Sucks to know bro. These chipsets are funny.

For those that can run 2.96GHz that was the only bug so far. Those that can't run it at all, that's something we'll look into and see if we can resolve. Some just can't male it there unfortunately.
 
  • Like
Reactions: Rosli59564

XxLostSoulxX

Senior Member
May 22, 2010
3,832
457
Charlotte, NC
Sucks to know bro. These chipsets are funny.

For those that can run 2.96GHz that was the only bug so far. Those that can't run it at all, that's something we'll look into and see if we can resolve. Some just can't male it there unfortunately.

Edit to what i previously posted i guess it only happens as soon as i set the voltage to 1.2V otherwise its fine in-till benchmarking which means it just cant handle staying at those high speeds on all cores i assume?
 

itsmikeramsay

Senior Member
Mar 25, 2009
5,343
12,239
Atlanta
Edit to what i previously posted i guess it only happens as soon as i set the voltage to 1.2V otherwise its fine in-till benchmarking which means it just cant handle staying at those high speeds on all cores i assume?

That's what I'm trying to figure out now lol. Seems like the case. Its me and DJ's first kernel so we're still learning stuff. Weird it works fine til benchmarking. Hopefully we find a solution real soon.
 

XxLostSoulxX

Senior Member
May 22, 2010
3,832
457
Charlotte, NC
That's what I'm trying to figure out now lol. Seems like the case. Its me and DJ's first kernel so we're still learning stuff. Weird it works fine til benchmarking. Hopefully we find a solution real soon.

yeah but the voltage is a problem too! that could be a factor that some phones cpu isn't as good. try setting your voltage to 1.2V for 3GHz and see if it crashes.
 

OPGT

Senior Member
Dec 11, 2012
307
182
rowlett
After a day of running it seems this kernel could be a battery killer. My battery when down much faster if I we r email to use lean kernel... hmm and yes I didn't over clock and my voltages were the ones included.

Sent from my DragonMOD-N9005 using xda premium
 

itsmikeramsay

Senior Member
Mar 25, 2009
5,343
12,239
Atlanta
After a day of running it seems this kernel could be a battery killer. My battery when down much faster if I we r email to use lean kernel... hmm and yes I didn't over clock and my voltages were the ones included.

Sent from my DragonMOD-N9005 using xda premium

What governor were you using? Amd youre on 9005 right?

I gotta figure out why some 9005 users are seeing battery drain. I'll check it out today.
 
  • Like
Reactions: Rosli59564

tytechguy

Member
Aug 9, 2012
39
31
127.0.0.1
Ok, here is what I have figured out. At least with my hardware anyway. I'm using the latest version of TricksterMod and this is what I can get. I can boot up @ 3ghz with my voltage at 1.2 ONLY if I set it manually to exactly that. 1.2. If I use the incremental voltage steps it puts me at 1215. No go. It locks up and reboots. But if I manually set it to 1.2 even, it boots, and I can run Quadrant to benchmark. I have been able to successfully apply all governers with a 2.956 clock and use 2 schedulers (row and zen, so far) Seems like anything over 1.2 volts and the max clock, it locks up and reboots. Being as though no two chips are the same, somebody may get a higher voltage/clock before lock up. Who knows. Anyway, it runs great so far. Haven't had a chance to test battery life. Will post that later. I upoaded a few screenshots of my benchmarks running these freqs/voltages. So far, great work guys! This can only get better from here :good:
 

Attachments

  • Screenshot_2013-11-24-09-21-29.jpg
    Screenshot_2013-11-24-09-21-29.jpg
    133.8 KB · Views: 1,596
  • Screenshot_2013-11-24-09-22-53.jpg
    Screenshot_2013-11-24-09-22-53.jpg
    131.6 KB · Views: 1,558
  • Screenshot_2013-11-24-10-08-53.png
    Screenshot_2013-11-24-10-08-53.png
    166.8 KB · Views: 1,647
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 103


    Code:
    #include <std_disclaimer.h>
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this kernel
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     */

    colnelxbanner_zps0f2ae845.png

    Kernel Status: STABLE


    COLONEL-X(B) FEATURES:

    GENERAL:

    • N900TUVUDNF4 Base
    • Linux Kernel Updates: 3.4.103
    • Linaro 4.9.1
    • SELinux: Permissive
    • Built with NEON VFP optimization flags
    • File Systems: exFAT, FAT, NFS, NTFS, F2FS
    • SWAP: swap, frontswap, zswap, znswap
    • USB Mass Storage
    • XZ Compression
    • xConfig (Inspired by Imoseyon's lkconfig)
    • Google's Snappy Compression/Decompression Library
    • Vmalloc Savings


    EXTRAS:

    • Synapse - AndreiF & apbaxel
    • USB FastCharge - yank555-lu
    • MDNIE Lite Controls - yank555-lu
    • LED Extended Controls - yank555-lu
    • Battery Life Extender (BLX) - Ezekeel
    • MSM-Hotplug - myfluxi
    • Intelliplug - faux123
    • Faux Sound - faux123
    • Bricked MPDecision - show1984
    • KThermal - Ktoonsez


    GOVERNORS & SCHEDULERS, ETC:

    • Overclocked: 2.8GHz
    • OC'd L2 and Bus Bandwidth
    • Custom Voltage Table - Imoseyon
    • Voltage Minimum: 600mv
    • CPU Hardlimit 2.0 (Yank555)
    • Conservative
    • InteractiveX - Imoseyon
    • BFQ Scheduler - ayysir
    • FIOPS Scheduler - Doomlord
    • SIO Scheduler - Doomlord
    • VR Scheduler
    • ZEN Scheduler - Brandon Berhent (No username)
    • Simple GPU Gov - faux123
    • Disabled Userspace Governor



    ColonelX(B) R24 Changelog

    Code:
    Rebased on Kitkat Build NF9
    Thermal: Add Intellithermal V2
    Thermal: Removed KThermal
    Driver: Add Sweep2Wake and Sweep2Sleep
    CPUFreq: Some changes to Smartmax
    Driver: Add Custom Vibration tool



    Version: R24 ColonelX | ColonelXB


    Download: Old Builds


    Source (Updated on Stable releases)


    XDA:DevDB Information
    ColonelX, Kernel for the T-Mobile Samsung Galaxy Note 3

    Contributors
    itsmikeramsay, itsmikeramsay
    Kernel Special Features: Listed above

    Version Information
    Status: Stable
    Current Stable Version: R24
    Stable Release Date: 2014-09-19
    Beta Release Date: 2014-04-09

    Created 2013-11-23
    Last Updated 2014-09-25
    17
    Good morning peeps, sorry about last night. Had you guys ready for a build, but didn't deliver. It wasn't done on purpose, had issues trying to get source to compile, but I believe it's good. I'm going to test things a little today and let you all know whether or not a build will come tonight. But from the looks of it... there will be one for sure this time... Once I get it all going, I'll drop a screenshot here to verify it... Thanks for your patience and thanks for not cursing me out lol

    Edit: FINALLY: 38 files changed, 925 insertions(+), 1891 deletions(-)

    Build's definitely coming tonight!!
    17
    R18 is pretty much ready folks. Most stable build in a long time imho. I'll need you guys to confirm it as official will be released today! I'll be releasing in IRC first to make sure all boots and is well, then I'll make the official release here on XDA shortly there after. Thanks for the support peeps, I'll let you all know once things are updated and ready!
    16
    Will you keep smartmax governor?
    Nope. None of the governors will change. I won't make any mods to them unless reboot issues happen again. But I doubt they'll happen again if everyone runs Interactive, which is the default governor.

    I know some folks may not like it, but my days with the Note 3 are numbered. I'll be moving onto the Nexus 6 and want to leave something real stable before I make that move...
    15
    [KERNEL][AOSP][N900X] | ColonelAX R11 | 3GHz | 3.4.80 | Much More!! - 2|17|14

    DISREGARD THIS POST, WIP FOR ColonelAX!!!


    ColonelXLogo_zpsa78f7f96.png

    Kernel Status: BETA


    COLONEL-AX FEATURES:

    GENERAL:

    • Supports Unified Source by CyanogenMod
    • Linux Kernel Updates: 3.4.82
    • GCC 4.8.3
    • SELinux: Permissive
    • Built with NEON VFP optimization flags
    • File Systems: exFAT, FAT, NFS, NTFS
    • SWAP: swap, frontswap, zswap, znswap
    • USB Mass Storage
    • LZO Compression (Bigger file, but boots much faster)
    • Ultra Kernel Same-page Merging (UKSM) - jasmison904
    • xConfig (Inspired by Imoseyon's lkconfig)
    • Google's Snappy Compression/Decompression Library
    • Vmalloc Savings


    EXTRAS:

    • USB FastCharge - yank555-lu
    • MDNIE Lite Controls - yank555-lu
    • LED Extended Controls - yank555-lu
    • TouchWake Finger/S-Pen - yank555-lu - Note1
    • Battery Life Extender (BLX) - Ezekeel
    • Bricked Mpdecision - show1978
    • FK Thermal - franciscofranco
    • Intelliplug - faux123
    • Intellithermal - faux123

    Note1: Touchwake disables when you hit the power button to turn off display. YOU MUST let the screen timeout and turn off itself in order for touchwake to work for the set delay time you have configured!!


    GOVERNORS & SCHEDULERS, ETC:

    • Overclocked: 3.01GHz (3GHz)
    • Underclocked: 96MHz
    • OC'd L2 and Bus Bandwidth
    • Custom Voltage Table - Imoseyon
    • Voltage Minimum: 600mv
    • ConservativeX
    • InteractiveX - Imoseyon
    • Intelliactive - faux123
    • Intellidemand - faux123
    • OndemandX - Imoseyon
    • OnDemandPLUS - boype
    • PegasusQ - ByungChang
    • Smartmax - maxwen
    • Smartmax_eps - maxwen
    • SmartassV2 - erasmux
    • WheatleyX - Based on Wheatley (Ezekeel)
    • BFQ Scheduler - ayysir
    • FIOPS Scheduler - Doomlord
    • SIO Scheduler - Doomlord
    • SIOPLUS Scheduler - boype
    • VR Scheduler
    • ZEN Scheduler - Brandon Berhent (No username)
    • Simple GPU Gov - faux123
    • Disabled Userspace & Powersave Governors



    Colonel-AX R11 Changelog

    Code:
    Initial Release!!



    Download: N900X - R11