[ROM] [4.4.2] [OFFICIAL] LiquidSmooth v3.0 Beta

deadman96385 · Feb 23, 2014

DISCLAMER

Your warranty is now void.

I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.

LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.

Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!

While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.

We ask that you do your part to know your device and know how to recover from problems before you flash!

Liquid0624

Deadman96385

jsnweitzel

Somber73

TheBr0ken

CPA-Poke

Cdub50

Code:

Linaro 4.9 GCC Toolchain
O3 Strict-Aliasing & ISO C++11 Mode
ARM Optimized String Handling Routines
Linaro and Code Aurora Optimaztions
Slims DPI on the fly
Custom animation controls
TRDS 3.0 (Liquid Blackout in settings)
Active Display
Slims QuickSettings
Halo (Renamed to bubble in settings)
Ram Bar
T-Mobile Theme Engine
Privacy Guard
Built in SuperUser
Working wifi Tethering
Cell Broadcasts
Slims Configurable Power Menu
Slims Configurable Nav Bar
Custom animation controls (Listview)
LockScreen Notifications
And way more than this...

Code:

[url="http://pastebin.com/WNTJMS6k"]LiquidSmooth v3.0 Full list of features[/URL]

Code:

[url="http://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]

Code:

[url="http://www.drdevs.com/devs/teamliquid/Nightly/Xperia%20Z%20Tablet%20GSM/"]Pollux Download[/URL]
[url="http://www.drdevs.com/devs/teamliquid/Nightly/Xperia%20Z%20Tablet%20Wifi/"]Pollux_Windy Download [/URL]

[url="http://www.drdevs.com/devs/teamliquid/Gapps/"]Slim AIO Gapps Download[/URL]

Please Support Liquid by Donating HERE

XDA:DevDB Information
[ROM] [4.4.2] [OFFICIAL] LiquidSmooth v3.0 Beta, a ROM for the Sony Xperia Tablet Z

Contributors
deadman96385

Version Information
Status: Testing

Created 2014-03-06
Last Updated 2014-03-09

deadman96385 · Feb 23, 2014

This is a stable beta build for the Xperia Tablet Z.

Bugs:

No confirmation that Theme has been applied, requires reboot to see the theme
Pie needs a reboot to show up

Xperia Tablet Z specific bugs:

Boot Animation is not sized properly

deadman96385 · Feb 23, 2014

Mine just in case

c0llal0 · Feb 23, 2014

Hey deadman96385,

will try ur pollux_windy build tomorrow.

my build wont install through TWRecovery ... today i did a fresh build ... again installation aborted.

i ftf flashed back to stock to get rid of my fotakernel TWRecovery and tried to install my build through

cwm ... installation was ok but it wont boot.

so lets see if ur build is usable.

btw i can test the whole stuff for u and sen u some logs and error reports ef u like!

Greetings and thanks for ur help in the last days!

deadman96385 · Feb 23, 2014

c0llal0 said:
Hey deadman96385,

will try ur pollux_windy build tomorrow.

my build wont install through TWRecovery ... today i did a fresh build ... again installation aborted.

i ftf flashed back to stock to get rid of my fotakernel TWRecovery and tried to install my build through

cwm ... installation was ok but it wont boot.

so lets see if ur build is usable.

btw i can test the whole stuff for u and sen u some logs and error reports ef u like!

Greetings and thanks for ur help in the last days!

There our three methods (That may work) to try if it does not want to flash in twrp they our
1. Unmount system then flash
2. Factory Reset, reboot to recovery again then flash
3. Flash CWM and in this case try flashing a alt kernel

Edit: Windy is up

c0llal0 · Feb 23, 2014

deadman96385 said:
There our three methods (That may work) to try if it does not want to flash in twrp they our
1. Unmount system then flash
2. Factory Reset, reboot to recovery again then flash
3. Flash CWM and in this case try flashing a alt kernel

Edit: Windy is up

Seen ... downloaded and tested ...
same bug with ur build ... i get bootloops ... it wont come pass sony logo.

can anybody confirm this or is something different broken over here???

need some sleep now

deadman96385 · Feb 23, 2014

c0llal0 said:
Seen ... downloaded and tested ...
same bug with ur build ... i get bootloops ... it wont come pass sony logo.

can anybody confirm this or is something different broken over here???

need some sleep now

You sure none of those methods worked?

c0llal0 · Feb 23, 2014

Need to try third method.

I need some sleep first got to be at work in about 7 hours.

But first and second method left me behind with the same bugs i had with my build.

Sent from my C6603 using XDA Premium 4 mobile app

c0llal0 · Feb 24, 2014

I give up for now ... no chance to mek it boot over here!
maybe the fault sits in front of the tablet, don't know ...

anybody else tested to install liquidsmooth???

any feedback for deadman??? come on ...

Edit:
Going back to stock rom and try to flash again.
It must be something wrong over here, i even can't
get omni to install.

Alx31 · Feb 24, 2014

Im following u guyz on G+ nice

So cool to see liquidsmooth spreading all over xperia models...i luv this rom on Yuga and will give a shot a bit later on tonite with my polluxwindy.

So cool thank u sir!
Whenever u need testerz pm me.

Tapatalked with my Yuga

GretaLewd · Feb 24, 2014

c0llal0 said:
I give up for now ... no chance to mek it boot over here!
maybe the fault sits in front of the tablet, don't know ...

anybody else tested to install liquidsmooth???

any feedback for deadman??? come on ...

Edit:
Going back to stock rom and try to flash again.
It must be something wrong over here, i even can't
get omni to install.

Installed with no problem using TWRP 2.6.3.0 :good:

Backed up using TWRP (Was running PAC ROM android 4.3)
Factory wipe, + wipe Dalvik & cache to be sure.
Flashed LiquidSmooth
Wipe Dalvik & cache again - just incase
Reboot - no problem - running LiquidSmooth

I'm now going to flash the provided Slim Gapps zip. Will report back if there's a problem

kano45 · Feb 24, 2014

Testing beta

I will flash this rom also once i'm off work. Thanks for bringing this to the tab Z!

Jequan · Feb 24, 2014

I am curious about this rom. Does it have double tap to wake?

Alx31 · Feb 24, 2014

Not yet or i didnt see where to activate it...but double tap status bar to sleep yes :angel:

SplitView aka multiwindow is working perfect...only Pie; i had to reboot to get it work.

And getting some fc's here and there...will bring back logcats tomorrow

c0llal0 · Feb 25, 2014

GretaLewd said:
Installed with no problem using TWRP 2.6.3.0 :good:

Backed up using TWRP (Was running PAC ROM android 4.3)

Factory wipe, + wipe Dalvik & cache to be sure.

Flashed LiquidSmooth

Wipe Dalvik & cache again - just incase

Reboot - no problem - running LiquidSmooth

I'm now going to flash the provided Slim Gapps zip. Will report back if there's a problem

Thanks for that, but i know how To .... Important for me is the information that it works because for me it always ends up in bootloops ... wether lsrom or omni ....
I got some serious trouble over here. Need to flash some older stock Rom than 4.3 and try again. God damn it

Sent from my C6603 using XDA Premium 4 mobile app

lupick · Feb 25, 2014

Is tape2wake feature implemented?

GretaLewd · Feb 25, 2014

lupick said:
Is tape2wake feature implemented?

How about looking 2 posts before?

blackassassinuk · Feb 26, 2014

So far this ROM is working excellent on Pollux in Dalvik.

Been using for two days for a total of around 24 hours and not had a single major problem. Very impressed its the slickest ROM I have used yet on 4.4.
I was using cm11 fidelity, then got a random reboot halfway through a game and got stuck in bootloop so thought I'd give this a try.

For anyone having issues, I had flashed cm11 fidelity inc mods then booted into CWM, didn't reflash kernel from laptop (no access at minute) just factory reset and wiped cache and dalvik cache.

Not major but once orr twice on MX player had the common sound bug, where the sound seems to stall for half a second, didn't have this on fidelity but had it on every other 4.4 ROM. One other issue is if you get a notification with headphones in, it still plays through loudspeakers too.

Very well done with this ROM guys thank you.

Alx31 · Feb 26, 2014

I dirty flashed it and i dont know why people says to modify first post i got it first try and apparently im not the one...

Well, someone else having trouble to mount SD?
I tried then a clean install and same thing, and also tried it with omni kernel...same thing, also no sd access from rom.

Tapatalked with my Yuga

deadman96385 · Feb 27, 2014

Could someone please test this new boot animation it is sized for this tablet, it is not flashable you will need to manually replace it, rename the 2560.zip to bootanimation.zip

Download Link: https://www.dropbox.com/sh/1h0mp8ekusdz1b9/5VRu5mD9VN/2560.zip

[ROM] [4.4.2] [OFFICIAL] LiquidSmooth v3.0 Beta

Retired Forum Moderator / Recognized Developer

Retired Forum Moderator / Recognized Developer

Retired Forum Moderator / Recognized Developer

Senior Member

Retired Forum Moderator / Recognized Developer

Senior Member

Retired Forum Moderator / Recognized Developer

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Retired Forum Moderator / Recognized Developer

Similar threads

Top Liked Posts