[ROM] [GSM] CM7 Gingerbread Beta 2012-02-19

Search This thread
By:
Advanced…
J

julianLo

Member
Nov 23, 2010
36
6
Vienna
ayman07 said:
thats the issue, i cant ADB onto the tab. just keeps saying not found. all the basic stuff is enabled, i can only get adb working in recovery.

-the latest patch didnt fix bluetooth either
Click to expand...
Click to collapse


that's strange, adb works perfect with me. (just upgraded to the lastest package, but adb also worked well before)
in this moment i'm listening to tron legacy soundtrack on my pc via bluetooth A2DP profile, works great :)

I also could mount the internal SD (/dev/emmc) to the notebook once, but couldnt umount it again, definitely a step forward :)

edit: I can even control the playback via bluetooth, so AVRCP works too.

Headset profile for calls doesn't work :(
 
Last edited:
Technomancer

Technomancer

Retired Recognized Developer
Feb 15, 2010
562
425
SF Bay Area
julianLo said:
edit the file: vendor/cyanogen/products/AndroidProducts.mk

and remove the line:
$(LOCAL_DIR)/cyanogen_crespo.mk \

then it should work.
Click to expand...
Click to collapse

You have to nuke whole device/samsung/crespo directory, effin buildsystem finds .mk files anywhere. I have to talk to noobnl about removing it completely or otherwise wrapping in ifdefs.

don't forget to apply patches from device/samsung/galaxytab/patchit

the adb issue is strange, it works for me both in normal mode and recovery just fine. try reconnecting your tab to different usb port.

ok i will try another fix for bluetooth connecting in the next release.

BTW, keyboard doesn't fully connect but I think CM frameworks do not have full support for keyboard yet, so maybe thats the case.
I tested my headset again and it seems to suck the same as it did in CM6. I hear lots of garbage/noise, and sometime little voice. I think there are several issues. One is that the audio is probably playing back at 44KHz but headset needs 8KHz. Theoretically the WM8994 codec should be doing sample rate conversion but I am not sure this is happening.
 
Last edited:
J

julianLo

Member
Nov 23, 2010
36
6
Vienna
Technomancer said:
I tested my headset again and it seems to suck the same as it did in CM6. I hear lots of garbage/noise, and sometime little voice. I think there are several issues. One is that the audio is probably playing back at 44KHz but headset needs 8KHz. Theoretically the WM8994 codec should be doing sample rate conversion but I am not sure this is happening.
Click to expand...
Click to collapse

Did you also try A2DP, this worked fine for me.
 
J

julianLo

Member
Nov 23, 2010
36
6
Vienna
Technomancer said:
You have to nuke whole device/samsung/crespo directory, effin buildsystem finds .mk files anywhere. I have to talk to noobnl about removing it completely or otherwise wrapping in ifdefs.
Click to expand...
Click to collapse

Yeah, I lost track of the changes I made.
I tried the steps again, and can canfirm that this works:

edit the file: vendor/cyanogen/products/AndroidProducts.mk
and remove the line:
$(LOCAL_DIR)/cyanogen_crespo.mk \

remove the system/device/samsung/crespo directory.
Click to expand...
Click to collapse

Yippie, I deployed my built kernel & factoryfs to the tab and it works!!!
I will now try to investigate the voice problem :)
 
Last edited:
zaxondis

zaxondis

Senior Member
Aug 11, 2010
425
69
New York City
Just a shoutout

Shoutout to Technomancer and all of the devs working on this. I'll be following this thread religiously going forward. I'm going to do some reading on Heimdall and recovery for the tab, but for now will just watch and wait to see when the Stable comes out.

Cyanogen needs to add you to the official CM site!
 
J

jongilluley

Senior Member
Mar 19, 2008
255
53
This beta is running great on my UK tab. Only issue ihave is when in cwm.its saint it can't mount e: and as host of cache directories.

Not an issue now that gapps are included in the Tom but could be in the future maybe?

Sent from my GT-P1000 using XDA App
 
Basil 123

Basil 123

Senior Member
Nov 30, 2010
964
234
albasil.com
Watching this thread with great interest. And respect for all the hard work going into this project.
As soon as it seems stable enough (i.e. CWM works, as do all the sensors) I would love to join in on the fun!
Currently on the CM7 nightlies on my N1 and they are functional enough to use as a daily driver now, a few bugs here and there are no biggie.
Hope you get the Tab listed by Cyanogen on their website - some recognition for the good work being done.

Cheers
Baz
 
A

AlpineM3

Senior Member
Sep 22, 2010
946
39
+1

Really amazed and stoked at the dev work coming through. Seems like we are starting to see the light at the end of the tunnel

Basil 123 said:
Watching this thread with great interest. And respect for all the hard work going into this project.
As soon as it seems stable enough (i.e. CWM works, as do all the sensors) I would love to join in on the fun!
Currently on the CM7 nightlies on my N1 and they are functional enough to use as a daily driver now, a few bugs here and there are no biggie.
Hope you get the Tab listed by Cyanogen on their website - some recognition for the good work being done.

Cheers
Baz
Click to expand...
Click to collapse



Sent from my ADR6300 using XDA App
 
paulshields

paulshields

Senior Member
Nov 17, 2006
383
54
Liverpool
julianLo said:
Yeah, I lost track of the changes I made.
I tried the steps again, and can canfirm that this works:



Yippie, I deployed my built kernel & factoryfs to the tab and it works!!!
I will now try to investigate the voice problem :)
Click to expand...
Click to collapse

julian - did you succeed in making a system image from the cmsgs source? I've compiled it OK for the tab, though did run into a few hurdles on the way and not tried flashing it yet. Just wondering if you're also using cmsgs or Technomancer's git.
 
jkurl

jkurl

Senior Member
Jan 20, 2011
635
106
Fairfield, Ca
Please read the first post in this thread. All the steps are there. I am not trying to be an ass about it. You might want to wait a little while longer for this. Tech is fixing stuff daily w/ this. He is working hard to make it awesome.
 
Technomancer

Technomancer

Retired Recognized Developer
Feb 15, 2010
562
425
SF Bay Area
Hey guys with voice call sound problems. What modems do you have?
In CM7 we are using RIL from Euro JK5 ROM. Could you try using modem.bin from the same ROM. It also works on my AT&T tab with Bell I9000UGJK3 modem.
 
Last edited:
Technomancer

Technomancer

Retired Recognized Developer
Feb 15, 2010
562
425
SF Bay Area
paulshields said:
julian - did you succeed in making a system image from the cmsgs source? I've compiled it OK for the tab, though did run into a few hurdles on the way and not tried flashing it yet. Just wondering if you're also using cmsgs or Technomancer's git.
Click to expand...
Click to collapse
Paul, all my work is now in cmsgs github. Any other git trees in my github are outdated, unless you want to try my cleaned up vanilla32.6.32.9->international->international update1 tree.

Actually, I should probably delete these trees to reduce confusion. (DONE)
 
Last edited:
fasthair

fasthair

Senior Member
Sep 26, 2010
123
14
Moto G Power
Just wanted to say very cool work. I don't have a Tab but this kind of work puts it on my radar. Keep up the great work and I'll keep an eye on this as you progress. And yes I got here because of the front page announcement. Congrats.

fasthair
 
You must log in or register to reply here.

Similar threads

stimpz0r
  • Poll
[ROM] [ICS|MTD] [GSM/CDMA] AOKP SGT7 - Milestone #6 (19/09/2012)
Replies
3K
Views
1M
A
agustincordoba
alterbridge86
  • Locked
[7.July.2011][ROM][GSM][2.3.3] ◄► Overcome ROM v3.0.0-ICARUS ◄► Kernel v3.2.0 ◄►
Replies
5K
Views
930K
alterbridge86
alterbridge86
alterbridge86
[3.MAY.2011][ROM/KERNEL][GSM] ♫ Overcome ROM v1.6.4 ♫ Overcome Kernel v2.1.6 ♫
Replies
5K
Views
882K
F
fresxcv
alterbridge86
[06.JAN.12][ROM/KERNEL][GSM] ♫ Overcome 7 Series v4.1.0 ♫ Overcome Kernel v4.0.0 ♫
Replies
2K
Views
677K
mr.natural
mr.natural
spacemoose1
  • Locked
Honeycomb SGT - Alpha 2 Archive [CDMA][GSM]
Replies
3K
Views
744K
Mikey
Mikey

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 90
    Technomancer
    Technomancer
    Hi everyone,

    First, read the readme.txt in the zip file.

    You flash it at your own risk. Backup everything. Learn how to use Heimdall. If it eats your dog it's not my problem :p . Many things are broken - post about it in the thread if nobody posted before. If you have any idea how to fix things, post too or PM me.

    Requirements: GSM (Euro, US ATT/TMO tabs), with JQ1 (Gingerbread) unprotected bootloaders that can run Euro JQ1 ROM and gt-p1000_mr.pit partitioning.
    Modem versions:
    ATT: use I9000UGJK3 modem (this is what I am using)
    TMO: try JK5
    Euro: reports say that JK5, JPZ modems work
    HK: user reports JK5 modem works.
    CDMA: This ROM does not support CDMA Tabs.
    LTN: experimental kernel included.

    The archive with the build with Heimdall is here http://gtab7.nexus-lab.com/cm7sgt/tcm7beta-2012-08-05.zip
    Please use heimdall to install. This zip file is not for flashing with CWM. Unzip and read the readme.txt in the zip file. Flash using the Heimdall command line (below).

    The update zip for CWM is here http://gtab7.nexus-lab.com/cm7sgt/cm-7-20120805-UNOFFICIAL-galaxytab.zip, (GSM only, no LTN), please be sure to flash it from recovery that supports EXT4 or flash it once so it updates kernel/recovery, reboot to new recovery and flash it again. If you encounter any problems, use the Heimdall version.

    P1000L/N
    There is experimental P1000L kernel and bootloaders included in LTN directory in Heimdall package. It should work on P1000L and maybe P1000N.
    Big thanks to Humberos for patches and testing. Adventureous souls with Latin Tabs please try it and report how it worked for you. You should have Gingerbread bootloaders and partitioning done first, so it should be easy if you are already running Gingerbread on your P1000L/N.

    Installation using Heimdall

    normal update from previous CM7 version, or a flash from another Gingerbread ROM:
    Code: 
     heimdall flash --kernel zImage --factoryfs factoryfs.ext4
    full flash and repartition:
    Code: 
     heimdall flash --repartition --pit gt-p1000_mr.pit --primary-boot boot.bin --secondary-boot sbl.bin --kernel zImage --factoryfs factoryfs.ext4 --cache cache.ext4 --dbdata dbdata.ext4
    Please be careful and double check your Heimdall command line when you flash bootladers, you may brick your Tab pretty bad.

    If you get stuck on first reboot after install, or your settings aren't saved it means your data partitions need to be reformatted to ext4. This should be handled by setup_fs in init.rc.
    If it didn't happen, start adb and run
    make_ext4fs /dev/block/mmcblk0p2
    make_ext4fs /dev/block/stl10
    make_ext4fs /dev/block/stl11
    Or try full wipe in recovery.

    make_ext4fs is slightly wonky so you could use "/system/bin/mke2fs -t ext4 -m 0" instead (recovery is also using make_ext4fs internally to wipe partitions)

    Samsung apps, Swype, Gapps etc
    This is an unofficial port of CyanogenMod. I am striving to give us the pure CyanogenMod experience on Galaxy Tab.
    So, there are no Samsung apps and don't ask for them.
    There is no TouchWiz and don't ask for it.
    It comes with ADW Launcher and if you want anything else, there is plenty of launchers in the Market.
    If you want Google Apps, get it from the usual place http://goo-inside.me/gapps/ and install from recvery after flashing update.zip. The Heimdall version has Gapps integrated right now.
    There is one stupid annoyance on Google sign-in welcome screen. It asks to slide open the keyboard (which we don't have and for now I can't find this setting). So skip the whole set up and sign in to Google account from Settings->Accounts&Sync.
    Swype: there is no Swype. Since Swype has a policy of allowing Swype on modded ROMs as long as the original ROM had Swype integrated, if somebody cares to make flashable zip with Swype I can link it from OP.

    Market issues.
    Market 3.x has much stricter rules about DPI and device checks. So very often it shows apps as not compatible with CM7 on GalaxyTab.
    Just go to Settings->Applications and uninstall updated Market it will go back to 2.x for a while.
    Or try tool like OldMarket http://xdaforums.com/showthread.php?t=1240344
    You can also change build.prop yourself, you will need to change two lines:
    ro.build.tags=test-keys to ro.build.tags=release-keys
    and
    ro.sf.lcd_density=200 ro.sf.lcd_density=240
    reboot, delete Market data from Settings->Applications

    Big thanks to junkshow for investigating it.

    sources at http://github.com/cm7sgt

    How to report bugs
    If you think you have found a bug.
    - verify you can repeat it, make sure it is not caused by the fact you did not wipe the device by rebooting to recovery and using wipe when you first installed CM7. Particularly when coming from other ROMs that use ext4. When coming from RFS your partitions should have been reformatted on first boot but wiping after install will not hurt.

    Please read existing open and already closed issues at http://github.com/cm7sgt/android_device_samsung_galaxytab/issues
    If your bug is new.
    Please see if it is upstream (general CM7 not related to Tab) bug, see in CM7 issues tracker http://code.google.com/p/cyanogenmod/issues/list
    If it is already there, please stop or add a comment there.
    If the bug is about generic issue, please try to verify it it also happens on other CM7 devices. If so, you should post it in CyanogenMod issues.
    If the bug is Galaxy Tab specific, like, some hardware functionality is missing, some driver not working. Dialogs messed up because of resolution etc, this means it belongs to Galaxy Tab device issue tracer and I can fix it.
    In this case please open new issue here http://github.com/cm7sgt/android_device_samsung_galaxytab/issues
    Please use pastie.org or something like that for posting logs.

    SDCARD controversy
    By default, the real micro SD is /mnt/sdcard, the internal mmc is /mnt/sdcard/external_sd, like in Galaxy S CyanogenMod builds.
    If you don't like it, you can swap the devices, go to Settings -> CyanogenMod settings -> Application and check Use internal storage [ ] checkbox.
    Reboot, now internal will be /mnt/sdcard, external will be /mnt/sdcard/external_sd like in Samsung's Android.

    In recovery, real sdcard in /sdcard, internal sdcard (embedded MMC) is /emmc.
    If you want to flash zip from /emmc just go in recovery "install zip from sdcard" -> "choose zip from internal sdcard" -> choose whatever you want to flash.
    --
    attachment.php


    Current status:
    Voice calls: OK (make sure to use modem.bin compatible with JQ1 RIL)
    3G data: OK
    Wifi: OK
    Bluetooth: OK
    Camera: Photos OK, video encoding (movie capture) back OK, front corrupted
    Sensors: seem OK
    GPS: OK
    Recovery and initramfs: CWM, partitions get mounted, wipe works, havent tried backup/restore
    Video playback: overlay and copybit work, OMX libraries are in and decoding works.

    Changelog:
    2012-08-05 http://gtab7.nexus-lab.com/cm7sgt/tcm7beta-2012-08-05.zip http://gtab7.nexus-lab.com/cm7sgt/cm-7-20120805-UNOFFICIAL-galaxytab.zip
    Fixed Bluetooth MAC address issue. Now it is read correctly from EFS. Thanks to ableeker.

    2012-07-28 http://gtab7.nexus-lab.com/cm7sgt/tcm7beta-2012-07-28.zip http://gtab7.nexus-lab.com/cm7sgt/cm-7-20120728-UNOFFICIAL-galaxytab.zip
    Update to latest from CM7 git.

    2012-02-19 http://gtab7.nexus-lab.com/cm7sgt/tcm7beta-2012-02-19.zip http://gtab7.nexus-lab.com/cm7sgt/update-cm-7-2012-02-19-Beta-GalaxyTab-KANG-signed.zip
    Update to latest from CM7 git. set default DPI to 240 to fix market issues, advanced users can set any DPI they want anyway.
    Go back to stock dialer layout because it has changed a lot.

    2011-11-02 http://gtab7.nexus-lab.com/cm7sgt/tcm7beta-2011-11-02.zip http://gtab7.nexus-lab.com/cm7sgt/update-cm-7-2011-11-02-Beta-GalaxyTab-KANG-signed.zip
    use android socket for wpa_supplicant control interface. anyone upgrading to this version please delete their /data/misc/wifi/wpa_supplicant.conf
    thanks to jt1134, removed extra field in mfc interface in kernel which prevented it from working with aries OMX libraries
    updated media_profiles.xml to expose 1024x600 and 800x600 resolutions for camcorder. its not perfect but at least video recording works now. front cam produces broken video.

    2011-10-31 http://gtab7.nexus-lab.com/cm7sgt/tcm7beta-2011-10-31.zip http://gtab7.nexus-lab.com/cm7sgt/update-cm-7-2011-10-31-Beta-GalaxyTab-KANG-signed.zip
    update to latest from git. we are little past 7.1.0.
    fix key setting for AP mode
    new init.rc/init.gt-p1000.rc unified with CDMA device

    2011-10-09
    move download cache to /data/cache_download and system dalvik cache to data, it should fix download issues with large APKs
    fix bluetooth keyboard keypad rotation issue
    move touchscreen event rotation to kernel to to clean up frameworks/base
    use switchable pair and new stacked mounts in vold for /mnt/sdcard and and /mnt/sdcard/external_sd

    2011-09-20
    Update to latest from git.
    Merged P1000L/N kernel. P1000L kernel included in build.
    Voodoo Sound update to V10. Switch to JHASH3 hash function in kernel.
    Disabled NEW_AP in Wifi driver, fixed hotspot mode.

    2011-08-07
    Update to latest from git. Android 2.3.5.
    Added BLN kernel driver and LIGHT_ID_NOTIFICATIONS -> /sys/class/misc/backlightnotification/notification_led device to liblights. Big thanks to Neldar.
    Fix geolocation/networklocation settings in props and frameworks' config.xml
    Update EGL driver and pvrsvrkm kernel driver to latest from EF17 Sprint GB release.

    2011-07-20
    Update to latest from git.
    Merge changes from Sprint GB kernel source release. Merge relevant kernel changes to up to 2.6.35.10.

    2011-06-21
    Enable CRT screen off/on animation.
    Add virtual flag to capacitive buttons to enable vibration when they are pressed.
    Increase HCI baud rate to 3M, hopefully this will help A2DP issues with BT keyboards.

    2011-06-13
    Rotary Lockscreen bitmaps and Twelve Key Dialer portrait and landscape layouts have been fixed by Fabrizio. Big thanks!
    Fixed wrong parameter to ril->setCallVolume, hopefully will make call audio better.
    Switched to use Samsung's binary brcm_patchram_plus with the same parameters in init.rc. Bluetooth SCO works now. Magic?

    2011-06-06
    Add attribute for available frequencies, fix cpufreq sysfs permissions so CMParts can access it.
    Change compile options for kernel to cortex-a8. Enable Tiny RCU.
    Fixed calls from other places in the kernel that used olde speed levels and caused frequency spikes to 1.2GHz.
    Fixed Low Power Mode (it properly starts /lpm.rc and displays charging animation).

    2011-06-05
    Added 10-point Multitouch to kernel (thanks to The_Double and hoss_n2)
    Added overclock (1.4GHz) and undevolt (thanks to Richard Trip and Koxudaxi)
    Added Voodoo Sound V9 (thanks to Supercurio and Richard Trip)
    Switched to (some) Crespo EGL SOs, hopefully will fix some OpenGL issues.

    2011-06-03
    Add usb_connected switch to kernel, fixes usb mounting and usb connection detection.
    Use mke2fs instead of make_ext4 for formatting in OTA and setup_fs. Should be more reliable.
    Added download mode to reboot menu.

    2011-05-30
    Fix problems with headphones/headsets and libaudio, kanged common-aries libaudio.
    Added OMX libraries and overlay from common-aries.

    2011-05-28r2
    Fixed setup_fs so it properly formats partitions.
    Enabled more tablet tweaks (soft buttons).
    Removed format for .android_secure in recovery, should fix wipe.

    2011-05-28
    Switched to Gingerbread kernel 2.6.35.7 recently released by Samsung.
    Use JQ1 binary drivers for OpenGL, sensors, lights, copybit, overylay, camera etc, so they all work!
    Portrait is default orientation now, ro.sf.hwrotation=90 is set and touchscreen events are rotated in input layer so they match.

    <cut short, more in readme.txt>

    Big thanks to noobnl, coolya, codeworkx, rotohammer, KhasMek, deodexed, captainkrtek, lilstevie, a_snowman, frusso, humberos, koxudaxi, spacemoose, oldmacnut and others for help, advice, testing etc etc.

    DEVS ONLY HERE ---------------------------------------

    How to build CYanogenMod 7 for Galaxy Tab GT-P1000
    First, please read this article http://wiki.cyanogenmod.com/index.php?title=Compile_CyanogenMod_for_CaptivateMTD

    You will need the same prerequisites.

    Then

    Get repo as described there. I put mine in /usr/local/bin

    Sync Android tree. You need to use manifest from cm7sgt github.
    (If you have more/less than 4 cores modify your -j4 accordingly)

    Create a directory for your Android, you will need oer 10GB of free space. It helps a lot to put it on SSD.

    repo init -u git://github.com/cm7sgt/android.git -b gingerbread

    since kernel.org gits are still down, until they are back up you need to sync repo tool from github, so use this command line, thanks to Disgustipated for pointing it out.
    curl https://raw.github.com/android/tools_repo/master/repo > ~/bin/repo
    chmod a+x ~/bin/repo
    repo init -u git://github.com/cm7sgt/android.git -b gingerbread --repo-url=git://github.com/android/tools_repo.git

    repo sync -j4

    Grab Rom Manager as described.

    You can't (no script) and don't need to copy proprietary files, everything is already included in vendor git.

    Setup your android build environment and choose device to build:
    . build/envsetup.sh
    lunch cyanogen_galaxytab-eng
    make -j4

    There, it should build with no issues. Sometimes it will complain about API changes, run make update-api then.

    From here you have two options.

    1. Build Heimdall images. You will need kernel with loop support, losetup, ext4 tools (mkfs.ext4).
    cd device/samsung/galaxytab/tools
    ./buildimage
    it will grab stuff from out and create ext4 images. Flash with Heimdall.

    2. Build update.zip
    make -j4 bacon

    How to build kernel
    First, you will need the arm toolchain from CodeSourcery. You need arm-2009q3-68-arm-none-eabi-i686-pc-linux-gnu.tar.bz2

    From http://www.codesourcery.com/sgpp/li...q3-68-arm-none-eabi-i686-pc-linux-gnu.tar.bz2

    Unpack it in /opt/toolchains. as root
    mkdir -p /opt/toolchains
    cd /opt/toolchains
    tar -xjvf arm-2009q3-68-arm-none-eabi-i686-pc-linux-gnu.tar.bz2

    Then in your CM7 tree
    BEFORE YOU BUILD CM7 TREE
    cd device/samsung/galaxytab
    ./kernel.sh defconfig
    ./kernel.sh modules

    This will configure the kernel and build and copy modules to prebuilt directories. The kernel build directory is out/target/product/galaxytab/kernel_build

    Build your android tree normally so initramfs is created.

    Then again
    cd device/samsung/galaxytab
    ./kernel.sh kernel
    This will build the kernel using the initramfs in recovery/root and update prebuilt kernel image.

    (for Latin kernel use kernel_ltn.sh script and use kernel_ltn file it produces)
    Now you need to run make on your android tree again so boot.img is updated.

    And proceed to buildimage or make bacon as usual.
    View
    10
    Technomancer
    Technomancer
    Little update

    Hi guys,

    I haven't been doing much with CM7 recently, but here is a little update that should bring you up to date with current CM7 tree and set default DPI to 240 to solve market issues.

    2012-02-19 http://gtab7.nexus-lab.com/cm7sgt/tcm7beta-2012-02-19.zip http://gtab7.nexus-lab.com/cm7sgt/update-cm-7-2012-02-19-Beta-GalaxyTab-KANG-signed.zip
    Update to latest from CM7 git. set default DPI to 240 to fix market issues, advanced users can set any DPI they want anyway.
    Go back to stock dialer layout because it has changed a lot.





    Also, I looked into the disappearing files issue some people have reported. From quick Google search it seems other people see it on other CyanogenMod devices too. It could be caused by errors on SD cards maybe? With fsck deleting the files after the card has been corrupted?

    There is also this Android bug, but it seems to have been fixed http://code.google.com/p/android/issues/detail?id=3692

    Also, if you have problems with disappearing files, what setting do you use for this? Settings -> CyanogenMod Settings -> Application settings -> Use internal storage
    This setting is used for swapping mount points for /mnt/sdcard and /mnt/sdcard/external_sd
    View
    8
    Technomancer
    Technomancer
    Update 2011-11-02

    This should fix wifi issues from previous update, but make sure to delete /data/misc/wifi/wpa_supplicant.conf and reboot.
    yes, you will lose your stored APs but it is necessary because the config template changed.
    2011-11-02
    use android socket for wpa_supplicant control interface. anyone upgrading to this version please delete their /data/misc/wifi/wpa_supplicant.conf
    thanks to jt1134, removed extra field in mfc interface in kernel which prevented it from working with aries OMX libraries
    updated media_profiles.xml to expose 1024x600 and 800x600 resolutions for camcorder. its not perfect but at least video recording works now. front cam produces broken video.
    View
    6
    Technomancer
    Technomancer
    Fabrizio fixed layout for landscape dialer and rotary lockscreen, they will be included in the next release.
    View
    6
    TheGrammarFreak
    TheGrammarFreak
    gomezzz said:
    hi all,

    could somebody help me out please? I just can't install the ROM. I'm using Heimdall Frontend 1.3.0; downloaded the tcm7beta-2011-08-07.zip; extracted this .zip file; phone is detected by Heimdall in download mode; loaded the factoryfs.ext4 under "Load package", but after extraction finished, I'm getting this error message: "firmware.xml" is missing from the package.

    I've downloaded and extracted the tcm7beta-2011-08-07.zip again but I'm getting the same error message. start button in Heimdall is not active, can't flash...

    when I'm trying to load zImage, I'm getting this error from Heimdall: "Tar header contained an invalid file size."

    what am I doing wrong? why it's not working for me? please help me.
    thank you.
    Click to expand...
    Click to collapse

    The new version of Heimdall is a little funny.

    What you want to do is extract the zip you have downloaded to a known directory, then open up heimdall. Click on the "Flash" tab then click on the browse button next to the PIT file option. Navigate to the pit file supplied with the ROM and select it. Now, underneath the box to the right you need to click on Add. When you do this a drop down menu to the left will become active. Change the highlighted option to Kernel, then underneath it click browse. navigate to the extracted zImage and select it. Now click add again, change the dropdown to factoryfs then click browse, select "factoryfs.ext4". Heimdall will issue a warning about the extension, just ignore it and carry on. Do the same process for cache (cache.ext4), and dbdatafs (dbdata.ext4). It will issue the warning for both of them, just ignore it and carry on.

    Once done the flash button becomes active, and you can go!

    If you need/want pictures, let me know. I'll update this post :D
    View

New posts