[ROM][07.05.12] SRKI's AOKP Beta 3 - Milestone 5 [Fast|Batterylife|BT|wifi|init.d]

Search This thread

guardante

Senior Member
Feb 24, 2010
124
38
Odessa
BT stereo audio fix does not work. It's stacking BT fully, and ic cannot connect to anything. When you turn off bluetooth - android reboots...
Try again, man. Waiting. I will use your great rom, when BT will work.!!Waiting man!
 

Srkineo

Senior Member
Sep 24, 2010
318
78
Geel
2bad it didnt work:( will look into it next week some more
tell me, It does connect trough BT, just audio doesnt go to the remote device?? cus if so, that gives me an idea.

I have something new, trying it out myself.. imo 3g was using to much power..
so ported as much as I can from SE ICS rom.. some more libs..

Experimental: CMW backup first.

btw, the new adreno libs dont seem to give performance increases>>I tested it in quadrants 3d test
 

Attachments

  • Sony_3g_rild_libs.zip
    149.1 KB · Views: 9
Last edited:
  • Like
Reactions: justmpm

mydegeneration

Senior Member
Apr 16, 2012
112
13
LED

How can I edit the home button led? I know the led patch is meant to stop the intense pink led but now there's no LED when home key is pressed. I would like to try a AOSP blue color for the led or just the stock white one.
 
Last edited:

Robottoe

Member
Jan 20, 2012
37
1
Hmm average 5% per hour drain in sleep mode :/ ,

using : 245,1017 and smartassv2 gov

any idea why its draining?
 

guardante

Senior Member
Feb 24, 2010
124
38
Odessa
I have almost same with BT. But in Bluetooth settings i see permanent "Connecting" status.
Yes, controls are working, but audio stream goes through phone speaker.
 

justmpm

Retired Senior Moderator
Dec 22, 2010
4,221
4,869
Jumpston Junction
thanks for the info, gonna wiggle around with the settings.. heating phones doesnt seem battery-friendly

screenshot ur battery history sometimes if you like^^ im curious

I attached a screen shot. Most of the drain is using the build prop I already posted....care to take a guess when I restored the network tweaks??

I will try your patch and let you know how it goes.

@Robottoe...make sure your phone is really going into deep sleep...sometimes it doesn't go to sleep from 245 MHz, so you can set the cpu min to 134 MHz to fix this. If you are unlucky...it might be the Network tweaks in your build.prop....which cause my battery to drain.....
 

Attachments

  • Screenshot_2012-05-05-08-46-59.jpg
    Screenshot_2012-05-05-08-46-59.jpg
    31.8 KB · Views: 107

8f86TcLjmt

Senior Member
Nov 13, 2010
119
35
Sony Xperia Z1 Compact
Xiaomi Mi A3
How can I edit the home button led? I know the led patch is meant to stop the intense pink led but now there's no LED when home key is pressed. I would like to try a AOSP blue color for the led or just the stock white one.

Don't install led patch and add the following lines to your hw_config.sh:

echo 4000 > $dev/red/max_current
echo 10000 > $dev/green/max_current
echo 10000 > $dev/blue/max_current

You'll get white LED like in Stock ROM. You can modify RGB values if you like.
 

Srkineo

Senior Member
Sep 24, 2010
318
78
Geel
I have almost same with BT. But in Bluetooth settings i see permanent "Connecting" status.
Yes, controls are working, but audio stream goes through phone speaker.

okok, I think ill be able to set some parameters that A2DP devices' audio stream gets redirected... will look into it further coming week

[edit] read something that this might be a general or common AOKP bug, also in Milestone 5, will report back when I have more time (at work atm)[/edit]
Hmm average 5% per hour drain in sleep mode :/ ,
using : 245,1017 and smartassv2 gov

any idea why its draining?

I have noticed this too, was thinking there was still a wifi drain issue or something.. but reading back in betterbatterystats.. it seems that AudioOut_1 might be the problem.. follow this guide to see if you it helps.. trying it out myself too^^ I disabled all checkboxes in sound.. straight horizontal line in battery stats atm.. will report back >> looks like this solves it! general ICS bug I think:(

I still have the zip from first screenshots battery stats, no sounds in those alpha builds.. so curious.. defo gonna solve this.. whole point of this rom is battery life in aokp setup^^ [edit] seems to be a common ICS problem.. lotsa threads about it[/edit]

Don't install led patch and add the following lines to your hw_config.sh:

echo 4000 > $dev/red/max_current
echo 10000 > $dev/green/max_current
echo 10000 > $dev/blue/max_current

You'll get white LED like in Stock ROM. You can modify RGB values if you like.

intresting, white would look good idd..might put this in next release by default with the old LED lib^^

********************************************************************************
Gonna make a new ROM based on MILESTONE 5 tonight!!:D

build 32 > milstone 5 resolves a long list of bugs, including 2g\data toggle working properly in M5!
********************************************************************************
 
Last edited:

Srkineo

Senior Member
Sep 24, 2010
318
78
Geel
Rom worked fine for a bit then wouldn't connect to any wifi

Sent from my ST18i using xda premium


sorry 2 hear that, doubt its the rom though..
I have 3 AP's in mah house and tested @ school & work today..worked ok for me.. try to Md5 check, WIPE, reflash (dont forget to also wipe dalvik cache)..

ps you are using AOKP kernel by sirkay?

btw working on milestone 5 ^^ but remodeling my work so I can upgrade more easily next time.. will be a late night\morning release
 

Ridho1

Senior Member
Dec 25, 2011
439
206
Suroboyo cok!
Xiaomi Poco X3 NFC
Oh man. I really like this ROM! Smoothest ICS ROM I have ever tried! Just replaced trebuchet with Apex Pro. Feels like Gingerbread's performance.

But how to get back APN? I cant connect over 3G. Once again, thanks!
 

Srkineo

Senior Member
Sep 24, 2010
318
78
Geel
Oh man. I really like this ROM! Smoothest ICS ROM I have ever tried! Just replaced trebuchet with Apex Pro. Feels like Gingerbread's performance.

But how to get back APN? I cant connect over 3G. Once again, thanks!

give it some time, I have 2 sim cards (NL & BE), sometimes takes a while for auto-config to kick in.

If it doesnt work: Menu>System Settings>More>Mobile Networks>Acess Point Names

you can make new ones, delete faulty ones.. Hope this works
 

Top Liked Posts

  • There are no posts matching your filters.
  • 12

    SRKI's AOKP port, build 32 by TEAM KANG

    for Xperia Ray



    2011%2B-%2B1
    47f57041-8326-872e.jpg
    attachment.php

    shot000018.png
    attachment.php
    shot000007y.png




    This Rom is built from the same base as jjdocter's & Davibs' AOKP roms, compiled by Supervenom.
    However I ported this from davibs' ARC Alessandra ROM V 0.7. He tweaked it, resulting in better battery life.

    This rom was possible, because of them! Thank you


    Working:
    V Wifi working fine with Sirkay's kernel in this ROM
    V USB
    V GPS
    V HWA
    V camera & frontcamera, incl LED flash
    V Bluetooth
    V TreBuchet with CM settings
    V Livewallpaper, Astro & Music player integrated
    V init.d working (ROMControl tweaks) !
    V Notification LED
    V USB-Tethering

    Big Bugs:
    - Wifi hotspot not working (not integrated in kernel yet)
    - Built in ASOP camera cannot do panorama or Video rec (panorama: Kernel problem, video-rec: Will have to wait for FXP to build something for SE phones)
    - If your battery drains faster than normal, see installation notes, last step!

    Minor Bugs:
    * no FM radio support yet (have to integrate sony SEMC, not a priority atm)
    * ROMControl weather function will FC, If you dont install GAPPS.
    * Power menu>reboot>recovery, Press home button to actually make the phone reboot.(framework problem, not planning on fixing this soon)
    * Caller volume bug (workaround to reach 100% volume:press [vol plus] until your at max, then [vol min] and then [vol plus]), AOKP bug.
    * A2DP Bluetooth stereo audio (BT-music headsets): audio isnt channeled to the headset, but sent to phone speaker anyone have any ideas?
    * Data and 2G toggle arent showing up, try flashing 2g data toggle patch below ROM download
    * Statusbar brightness bar might bounce a bit, general AOKP bug, dunno how to fix yet
    * Face unlock cant find camera (will try and fix this)

    TODO

    - Add&Test supercharge script (its availablefor download if you want to try it yourself, see experimental) I dont see alot of difference after flashing this, anyone noticing speed-upgrades after applying this? please report
    - Try to get Auto-Brightness to work (have to look into this, might be kernel related, not sure if its even officially supported by sony)
    - Suggestions are welcome!

    Battery Performance

    This is without using the AOKP power save 2G options screenshots is Beta 1 & Beta 2. 3rd screenshot is Beta 3 (wanted to dev again after 2 hours)
    attachment.php
    &
    attachment.php
    &
    attachment.php


    1: 1% drop, 245-1017 GOV: ondemand *********** 2: 2-3% drop, 134-1612 GOV: SmartAssV2
    3G disabled, perfect Signal ********************* 3G enabled and crappy signal

    To get these results I used:
    Baseband 70 - MD5 Hash: D5432A6019C9C668ABC7F1199DF9BCAF
    Sirkay's AOKP kernel v2 (attached) - MD5 hash: E0BCA9886F88333594C22BC73E073FE7
    DISABLING ALL SOUND CHECKBOXES, see installation steps

    Notes

    * I am not responsible for damage to your device, use at own risk!
    * Installing takes a long time, be patient:) dont forget to flash GAPPS.
    * If you experience problems, check MD5 sums(!!!!!) and Full Wipe
    * Curious about your specific idle battery usage\drains see: BetterBatteryStats
    * FXP119 kernel should also work on this rom, untested how this affects battery etc.
    * Camera-app that allows video-recording (choppy, but working apperently). Ty mydegeneration

    Installation

    1 Flash kernel (attached)
    2 Flash baseband
    3 Flash Rom
    4 Flash any fixes
    5 Flash GAPPS
    6 Very important: Go to Menu>Settings>Sound
    Set it up as follows:

    attachment.php

    If you dont set this, you will suffer battery drain, general ICS bug, it causes AudioOut_1 wakelocks

    ROM Download, see 2nd post for changelog & older versions

    Beta 3.0 - AOKP Milestone 5, (GAPPS not integrated, download below) - MD5 Hash: 6A0FAC6393E0BF9978832D136C115BEF - don't forget to flash brightness-patch after this

    Google Apps:
    Google Apps GAPPS 20120429 (Play store etc) - MD5 Hash: 7C524E1E078164F681E0AA6753180B2C

    Patches

    Brightness_Patch_beta3.zip - MD5 Hash: E6B6E2842644C9B9A9FA46753F399457 flash after Beta 3 to fix brightness-setting not getting saved
    New Google ICS Music app - MD5 hash: 97F36490116EDCDBC8B882EB87E27930

    Experimental - Before testing the following, Backup!

    ROMControl with 2G & Data Toggle, mirror - MD5 Hash: 58A00F5E578230D8558A058660729470 ***not originally designed for this rom, I dont support this***
    OOM-Priority-Charger-v1.4-aokp-m5_SRKI_beta3 - MD5 hash: 5A8D3531517B092B63D2F660CE0DC613

    I found a bug,solution or have a suggestion?!

    For bugs, please check if it's not a general AOKP bug here

    Solutions please PM me^^

    Suggestions post or if its 'HUGE', PM;)

    Need some serious JAVA DEV help with:

    - Hacked wpa_supplicant (from /system/bin) which will allow ad-hoc mode (to get wifi tethering to work)
    - Hacked Camera.apk, to get camcorder working (or porting SECM camera to AOSP)
    - Porting radio app to AOSP without using SEMC framework

    some remarkable things have been programmed by nobodyAtall, in his rom [ROM] MiniCM9-3.0.1 [2/5/12]ICS 4.0.4/CM9 port for the Χ10 mini, perhaps people can get ideas etc from his rom (he for example ported radio app without a semc framework being present!).

    His rom is based on an Xperia that is very similar to a ray in hardware, hopefully close eneugh;)

    N'Joy
    5
    got Ray's version for build 38?

    If you want build 38, it looks like you are going to have to do it yourself...but it is really really easy. If you can flash in CWM recovery then you can do it! You need to download 3 things:

    1. Download the build 38 from here: http://xdaforums.com/showthread.php?t=1609516

    You want the RC1 version and put it on your sdcard. Make sure to thank Supervenom while you are there.....

    2. Download the camcorder fix from here: http://xdaforums.com/showpost.php?p=27248035&postcount=240

    YES THE CAMCORDER IS FIXED!!!!!! Save it to the SDcard. Don't forget to thank mchj for putting together the fix...and if you are feeling really thankful don't forget to thank Aarush, who figured it out in the 1st place: http://xdaforums.com/showpost.php?p=27219644&postcount=1333 (but don't flash this one!)

    3. Download the porting patch from here: http://www.mediafire.com/?bpw79n16iixnvvi

    I won't tell you where to put it...you know!!!! Thank JJdoctor for making the original patch: http://xdaforums.com/showthread.php?t=1534656&highlight=arc+ray+port+patch


    You will need an AOKP compatible kernel. Supervenom recommends FXP124 because Sirkay's AOKP "isn't updated to last FXP sources." But, FXP124 doesn't have a working CWM recovery, so it is probably best to use Sirkay's AOKPv2.2 (it is working for me!) You can also try hot booting a kernel with CWM Recovery - if you must have FXP114. Sirkay's kernel is here: http://xdaforums.com/showpost.php?p=26251847&postcount=1229
    Don't forget to hit thanks while you are there.

    Now port the ROM (don't reboot until the end):
    1. In recovery, full wipe (factory reset, wipe dalvik cache). If you have wifi troubles, repeat the full wipe and then format the system and data partitions (find under "mounts and storage" in the main CWM menu).

    2. Flash the ROM

    3. Flash the ARCNEO2RAY_Patch.zip

    4. Flash the CAM_FIX_CWM_by_mchj.zip to fix the camcorder

    5. Flash GAPPS if you want them.

    Reboot into the ROM....enjoy the unicorness of it!

    The ARCNEO2RAY_Patch has an old build.prop of Srkineo's in it - I believe from build 32. You will probably want to check it out and make any changes you see fit. When I did this, it booted with the old AOKP boot animation. I attached the new animation, which I took from ChampionSwimmer's AOKP Beta3 build. In case you want the new animation, just replace the old bootanimation.zip with the attached one....you can find the bootanimation.zip in /system/media... make sure the permissions are rw-rw-rw- and reboot. bootanimation.zip IS NOT FLASHABLE....so don't flash it.....

    Seriously....thank the Developers who made this work....with out them we would be stuck on bloatware overloaded ICS stock wondering how much the marketing firm got paid for thinking up the name timescape.....
    4
    @ Srkino..

    Here is the Source ROM for Milestone 5 for Ray which supervenom sent me

    you look more interested in this ROM ... I will be happy if u continue it further..

    .. I am not gonna get enough time to work on it since I am quite busy and the time I get I can only spare for Hybrid ROMs.

    BT is not working but hope u already know the solution to that...

    http://www.mediafire.com/?0bcnjnmwmlihsnh

    You need any help, let me know...
    3
    How can I edit the home button led? I know the led patch is meant to stop the intense pink led but now there's no LED when home key is pressed. I would like to try a AOSP blue color for the led or just the stock white one.

    Don't install led patch and add the following lines to your hw_config.sh:

    echo 4000 > $dev/red/max_current
    echo 10000 > $dev/green/max_current
    echo 10000 > $dev/blue/max_current

    You'll get white LED like in Stock ROM. You can modify RGB values if you like.
    3
    logcat of starting camera and setting it to recording:
    Code:
    D/dalvikvm( 1556): GC_CONCURRENT freed 573K, 6% free 11417K/12103K, paused 12ms+7ms
    D/dalvikvm( 1556): GC_CONCURRENT freed 616K, 6% free 11504K/12231K, paused 2ms+9ms
    V/videocamera( 1827): startVideoRecording
    D/CameraStorage( 1827): External storage state=mounted
    V/videocamera( 1827): initializeRecorder
    E/MediaProfiles(  131): getInstance
    E/MediaProfiles(  131): getInstance f1990
    W/StagefrightRecorder(  131): Max file duration is not positive: 0 us. Disabling duration limit.
    W/StagefrightRecorder(  131): Target duration (0 us) too short to be respected
    V/videocamera( 1827): New video filename: /mnt/sdcard/DCIM/Camera/VID_20120525_215422.mp4
    I/MediaRecorderJNI( 1827): prepare: surface=0x239ec0 (identity=52)
    I/CpuGovernorService(  267): intent action: com.android.server.CpuGovernorService.action.IOBUSY_VOTE
    I/CpuGovernorService(  267): IOBUSY vote: 0
    E/MediaProfiles(  131): getCamcorderProfileParamByName: duration for camera 0, quality 0
    E/MediaProfiles(  131): Guru : quality = 0, index = 14
    E/MediaProfiles(  131): getCamcorderProfileParamByName: file.format for camera 0, quality 0
    E/MediaProfiles(  131): Guru : quality = 0, index = 14
    E/MediaProfiles(  131): getCamcorderProfileParamByName: vid.codec for camera 0, quality 0
    E/MediaProfiles(  131): Guru : quality = 0, index = 14
    E/MediaProfiles(  131): getCamcorderProfileParamByName: vid.bps for camera 0, quality 0
    E/MediaProfiles(  131): Guru : quality = 0, index = 14
    E/MediaProfiles(  131): getCamcorderProfileParamByName: vid.fps for camera 0, quality 0
    E/MediaProfiles(  131): Guru : quality = 0, index = 14
    E/MediaProfiles(  131): getCamcorderProfileParamByName: vid.width for camera 0, quality 0
    E/MediaProfiles(  131): Guru : quality = 0, index = 14
    E/MediaProfiles(  131): getCamcorderProfileParamByName: vid.height for camera 0, quality 0
    E/MediaProfiles(  131): Guru : quality = 0, index = 14
    E/MediaProfiles(  131): getCamcorderProfileParamByName: aud.codec for camera 0, quality 0
    E/MediaProfiles(  131): Guru : quality = 0, index = 14
    E/MediaProfiles(  131): getCamcorderProfileParamByName: aud.bps for camera 0, quality 0
    E/MediaProfiles(  131): Guru : quality = 0, index = 14
    E/MediaProfiles(  131): getCamcorderProfileParamByName: aud.hz for camera 0, quality 0
    E/MediaProfiles(  131): Guru : quality = 0, index = 14
    E/MediaProfiles(  131): getCamcorderProfileParamByName: aud.ch for camera 0, quality 0
    E/MediaProfiles(  131): Guru : quality = 0, index = 14
    D/CameraSource(  131): Camera does not support setVideoSize()
    W/CameraSource(  131): Invalid hfr value(-1) set from app. Disabling HFR.
    W/StagefrightRecorder(  131): Camera source supports metadata mode, create OMXCodec for metadata
    E/OMXCodec(  131): Attempting to allocate OMX node 'OMX.TI.DUCATI1.VIDEO.H264E'
    E/OMXCodec(  131): Attempting to allocate OMX node 'OMX.qcom.7x30.video.encoder.avc'
    E/OMXCodec(  131): Attempting to allocate OMX node 'OMX.qcom.video.encoder.avc'
    E/OMX-VENC-720p(  131):
    E/OMX-VENC-720p(  131):  omx_video(): Inside Constructor()
    E/OMX-VENC-720p(  131):
    E/OMX-VENC-720p(  131):  omx_venc(): Inside component_init()
    E/OMX-VENC-720p(  131): bool venc_dev::venc_validate_profile_level(OMX_U32*, OMX_U32*): Returning with eProfile = 1Level = 4
    E/OMX-VENC-720p(  131):
    E/OMX-VENC-720p(  131):  bool venc_dev::venc_open(OMX_U32)(): Init Profile/Level setting success
    E/OMX-VENC-720p(  131): vidc.venc.debug.sliceinfo value is 0
    E/OMX-VENC-720p(  131):
    E/OMX-VENC-720p(  131):  Component_init return value = 0x0
    E/OMXCodec(  131): Successfully allocated OMX node 'OMX.qcom.video.encoder.avc'
    E/OMX-VENC-720p(  131):
    E/OMX-VENC-720p(  131): WARNING: Requested i/p bufsize[38016],Driver's updated i/p bufsize = 1382400
    E/OMX-VENC-720p(  131): bool venc_dev::venc_validate_profile_level(OMX_U32*, OMX_U32*): Returning with eProfile = 1Level = 5
    E/OMX-VENC-720p(  131):
    E/OMX-VENC-720p(  131):  bool venc_dev::venc_set_param(void*, OMX_INDEXTYPE)(): Profile/Level setting success
    E/OMX-VENC-720p(  131): bool venc_dev::venc_validate_profile_level(OMX_U32*, OMX_U32*): Returning with eProfile = 1Level = 5
    E/OMX-VENC-720p(  131): Calling set level (Framerate) with 18
    E/OMX-VENC-720p(  131): bool venc_dev::venc_validate_profile_level(OMX_U32*, OMX_U32*): Returning with eProfile = 1Level = 5
    E/OMX-VENC-720p(  131): Calling set level (Bitrate) with 18
    E/OMX-VENC-720p(  131): get_parameter: OMX_IndexParamVideoProfileLevelQuerySupported for Input port returned Profile:1, Leve
    E/OMX-VENC-720p(  131): bool venc_dev::venc_validate_profile_level(OMX_U32*, OMX_U32*): Returning with eProfile = 1Level = 5
    E/OMX-VENC-720p(  131):
    E/OMX-VENC-720p(  131):  venc_set_intra_period: nPFrames = 30 nBFrames = 0
    E/OMX-VENC-720p(  131): bool venc_dev::venc_validate_profile_level(OMX_U32*, OMX_U32*): Returning with eProfile = 1Level = 5
    E/OMX-VENC-720p(  131): Calling set level (Bitrate) with 18
    W/StagefrightRecorder(  131): Intended number of audio channels (2) is too large and will be set to (1)
    V/AudioHardwareMSM7X30(  131): AudioStreamInMSM72xx::set(1, 16, 48000)
    V/AudioHardwareMSM7X30(  131): get config
    V/AudioHardwareMSM7X30(  131): set config
    V/AudioHardwareMSM7X30(  131): confirm config
    V/AudioHardwareMSM7X30(  131): buffer_size: 2048
    V/AudioHardwareMSM7X30(  131): buffer_count: 8
    V/AudioHardwareMSM7X30(  131): channel_count: 1
    V/AudioHardwareMSM7X30(  131): sample_rate: 48000
    D/AudioHardwareMSM7X30(  131): AudioStreamInMSM72xx::standby()
    V/AudioHardwareMSM7X30(  131): driver closed
    E/OMXCodec(  131): Attempting to allocate OMX node 'OMX.TI.AAC.encode'
    E/OMXCodec(  131): Attempting to allocate OMX node 'OMX.qcom.audio.encoder.aac'
    W/MPEG4Writer(  131): 32-bit file size limit (5178326912 bytes) too big. It is changed to 2147483647 bytes
    D/AudioHardwareMSM7X30(  131): AudioStreamInMSM72xx::standby()
    I/MPEG4Writer(  131): limits: 2147483647/0 bytes/us, bit rate: 6128000 bps and the estimated moov size 405000 bytes
    I/MPEG4Writer(  131): Start time offset: 700000 us
    I/caladbolg(  131):  519390137 cald_capctrl.c                    (6371)  2005 P [CAP]  519390137 + Cald_CapCtrl_FSM_Func_Sto
    I/caladbolg(  131):  519390198 cald_hal_qct.c                    (3054)  2005 P [HAL]  519390198 + Cald_Hal_Qct_If_StopPrevi
    I/caladbolg(  131):  519390748 cald_hal_qct.c                    (3087)  2005 P [HAL]  519390748 - Cald_Hal_Qct_If_StopPrevi
    I/caladbolg(  131):  519390809 cald_hal_qct.c                    (7007)  2005 P [HAL]  519390809 + Cald_Hal_Qct_If_DeleteIma
    I/caladbolg(  131):  519391236 cald_hal_qct.c                    (7036)  2005 P [HAL]  519391236 - Cald_Hal_Qct_If_DeleteIma
    I/caladbolg(  131):  519391816 cald_capctrl.c                    (6382)  2005 P [CAP]  519391816 - Cald_CapCtrl_FSM_Func_Sto
    I/caladbolg(  131):  519394745 cald_capctrl.c                    (6128)  2005 P [CAP]  519394745 + Cald_CapCtrl_FSM_Func_Sta
    I/caladbolg(  131):  519395630 cald_hal_qct.c                    (2983)  2005 P [HAL]  519395630 + Cald_Hal_Qct_If_StartPrev
    I/caladbolg(  131):  519513154 cald_hal_qct.c                    (3042)  2005 P [HAL]  519513123 - Cald_Hal_Qct_If_StartPrev
    I/caladbolg(  131):  519513215 cald_hal_qct.c                    (6612)  2005 P [HAL]  519513215 + Cald_Hal_Qct_If_CreateIma
    I/caladbolg(  131):  519514100 cald_hal_qct.c                    (6890)  2005 P [HAL]  519514100 - Cald_Hal_Qct_If_CreateIma
    I/caladbolg(  131):  519514161 cald_capctrl.c                    (6358)  2005 P [CAP]  519514161 - Cald_CapCtrl_FSM_Func_Sta
    I/caladbolg(  131):  519514344 cald_camctrl.c                   (14182)  2003 P [SVR]  519514344 + Cald_CamCtrl_FSM_Func_Fra
    I/caladbolg(  131):  519526703 cald_camctrl.c                   (14192)  2003 P [SVR]  519526673 - Cald_CamCtrl_FSM_Func_Fra
    W/OMXCodec(  131): Trying to enable metadata mode on encoder
    E/OMX-VENC-720p(  131):  Set meta buffer mode failed
    E/OMX-VENC-720p(  131):
    E/OMX-VENC-720p(  131): ERROR: set Metabuffer mode 1 fail
    E/OMXNodeInstance(  131): OMX_SetParameter() failed for StoreMetaDataInBuffers: 0x80001019
    E/OMXCodec(  131): Storing meta data in video buffers is not supported
    E/OMXCodec(  131): [OMX.qcom.video.encoder.avc] Allocate Buffer failed - error = -2147483648
    E/MediaRecorder( 1827): start failed: -2147483648
    E/videocamera( 1827): Could not start media recorder.
    E/videocamera( 1827): java.lang.RuntimeException: start failed.
    E/videocamera( 1827):   at android.media.MediaRecorder.native_start(Native Method)
    E/videocamera( 1827):   at android.media.MediaRecorder.start(MediaRecorder.java:704)
    E/videocamera( 1827):   at com.android.camera.VideoCamera.startVideoRecording(VideoCamera.java:1622)
    E/videocamera( 1827):   at com.android.camera.VideoCamera.onShutterButtonClick(VideoCamera.java:671)
    E/videocamera( 1827):   at com.android.camera.ShutterButton.performClick(ShutterButton.java:108)
    E/videocamera( 1827):   at android.view.View$PerformClick.run(View.java:14105)
    E/videocamera( 1827):   at android.os.Handler.handleCallback(Handler.java:605)
    E/videocamera( 1827):   at android.os.Handler.dispatchMessage(Handler.java:92)
    E/videocamera( 1827):   at android.os.Looper.loop(Looper.java:137)
    E/videocamera( 1827):   at android.app.ActivityThread.main(ActivityThread.java:4424)
    E/videocamera( 1827):   at java.lang.reflect.Method.invokeNative(Native Method)
    E/videocamera( 1827):   at java.lang.reflect.Method.invoke(Method.java:511)
    E/videocamera( 1827):   at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:784)
    E/videocamera( 1827):   at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:551)
    E/videocamera( 1827):   at dalvik.system.NativeStart.main(Native Method)
    V/videocamera( 1827): Releasing media recorder.
    D/MPEG4Writer(  131): Stopping writer thread
    D/MPEG4Writer(  131): 0 chunks are written in the last batch
    D/MPEG4Writer(  131): Writer thread stopped
    D/MPEG4Writer(  131): Stopping Video track
    E/MPEG4Writer(  131): Stop() called but track is not started
    E/OMX-VENC-720p(  131):
    E/OMX-VENC-720p(  131):  omx_venc(): Inside component_deinit()
    E/OMX-VENC-720p(  131): Calling m_heap_ptr.clear()
    E/OMX-VENC-720p(  131): Calling venc_close()
    E/OMX-VENC-720p(  131):
    E/OMX-VENC-720p(  131):  venc_close(): Calling VEN_IOCTL_CMD_STOP_READ_MSG
    E/OMX-VENC-720p(  131): Deleting HANDLE[0x1f688]
    E/OMX-VENC-720p(  131): OMX_Venc:Component Deinit
    E/OMX-VENC-720p(  131):
    E/OMX-VENC-720p(  131):  ~omx_video(): Inside Destructor()
    E/OMX-VENC-720p(  131): omx_video: Waiting on Msg Thread exit
    E/OMX-VENC-720p(  131): omx_video: Waiting on Async Thread exit
    E/caladbolg(  131):  520379578 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  520413453 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  520447113 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  520480805 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  520514496 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  520548188 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  520581818 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  520616944 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  520649598 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  520683320 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  520716980 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  520750672 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  520784852 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  520818604 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  520852143 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  520885865 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  520918671 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  520952301 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  520985962 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  521019654 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  521053315 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  521087006 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  521120697 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  521154908 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  521188599 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>
    E/caladbolg(  131):  521222168 cald_capctrl.c                    (7126)  2005 E [CAP] ERROR:PAL QueuePop fail <NotFound>

    hmm.. working too much lately with framework files on Sony, I found many things... rather learnt how these smali files. work.. I have a feeling I can fix this camcoder bug....:cool:...

    all this time I have been embedding AOKP methods in Sony frameowork to make AOKP things work... I dont think it will be impossible to do the reverse, i.e embedd sony methods in AOKP ...