{X10}[DEVELOPMENT] -FXP130- CM7.2.0 - RELEASED - FreeXperia Project

Hzu · Mar 11, 2012

Alright, here's a quick report (there's not much to be said):
- Camera, same as always.
- Performance, a lot better. I feel it's a lot snappier, and faster. Scrolling is very smooth. UI animations are very smooth.
- Battery, goes down a little bit faster than usual, maybe a little bit faster than FXP109.

That's all I have to report.

szo · Mar 12, 2012

Like hzu say, all is good in the rom,
with the lib for camero from fxp107, camero is ok,
But i have, like many other, deep sleep issue.
Any idea?
I have kill all running app but no deep slepp ...

TAL333 · Mar 12, 2012

szo said:
Like hzu say, all is good in the rom,
with the lib for camero from fxp107, camero is ok,
But i have, like many other, deep sleep issue.
Any idea?
I have kill all running app but no deep slepp ...

try smartass governor. Unplugged it enters deep sleep in 1 minute 35 seconds.

maikinho10 · Mar 12, 2012

szo said:
Like hzu say, all is good in the rom,
with the lib for camero from fxp107, camero is ok,
But i have, like many other, deep sleep issue.
Any idea?
I have kill all running app but no deep slepp ...

TAL333 said:
try smartass governor. Unplugged it enters deep sleep in 1 minute 35 seconds.

Reboot--CWM Recovery--Wipe Partition--wipe dalvik cache!

NOW Deep sleep works!

greets m10

Skorvy · Mar 12, 2012

szo said:
No deep sleep in smartass for me

Try turn off automatic sync if u have on and automatic clock. do not use cpu master or no-frills cpu control or any app for cpu.

maikinho10 · Mar 12, 2012

szo said:
No deep sleep in smartass for me

Skorvy said:
Try turn off automatic sync if u have on and automatic clock. do not use cpu master or no-frills cpu control or any app for cpu.

Hi,

hmm... it isnt the Issue, the Problem is Partition and Cache is not "empty"

Clear these and all is fine

(look two posts before..)

greets

m10

lunarjetman1 · Mar 12, 2012

bengtner said:
I have finally decided to try CM7.2 and 9.0, unlocked my bootloader etc. to prepare for this. However, I have ended up with a problem with the build.prop and I can't load the file. Read all relevant posts about this but I don't really get how to fix this. First I tried to delete the assert line in update.script. I managed to load CM9.0 with this change, but ROM did not get up running. Got stuck on the Sony Ericsson logo. Had to install stock ROM with SEUS and start all over again.

Then I tried to copy build.prop from stock rom and replaced this file in the new ROM before loading it. Ended up with the same assert problem as with my first attempt.

I'm a bit tired playing around with this now. How come this ROM is built with the wrong files for X10? Please come back with a clear instruction how to solve this issue.

You shouldn't be seeing the sony erricson logo unless you haven't flashed the correct kernel.

Go to the cm9/cm7.2 thread in general section for help.

Sent from my Xperia X10 using XDA

licha26 · Mar 12, 2012

http://uploaded.to/file/0pl4fdwk/from/fmicch
this one my friend

the kernel is in flashtool-0.6.8/firmwares and its name is X10_CUSTOM.ftf but you just have to start the flashtool provided in the .7z and flash it like doom one. Good luck and enjoy CM !

Hzu · Mar 13, 2012

Dep sleep is working fine here. I'll put up a screenshot later (gonna record for a second time). Yesterday's record was like 2 hours, but then no more, because I my brother played it, and had to recharge it again. But I can confirm that it works fine.

Hzu · Mar 13, 2012

Alakasam said:
Yep, I can also confirm with Hzu, deep sleep works fine! No problemo

To prove it, here's a screenshot. My CPU clock is set to 128 - 1036Mhz, with the INTERACTIVE governor. And I use the built-in CyanogenMod settings to change these values, I don't use any other external applications like SetCPU or No-frill CPU since they're completely unnecessary because of the CM Settings menu.

Olli80 · Mar 14, 2012

Hi there,

want to setle over to the FXP Rom but whats up here????

Code:

[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-anzu-KANG-signed.zip
92,17 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-coconut-KANG-signed.zip
87,34 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-es209ra-KANG-signed.zip
89,37 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-hallon-KANG-signed.zip
92,14 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-iyokan-KANG-signed.zip
92,14 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-mango-KANG-signed.zip
87,48 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-satsuma-KANG-signed.zip
87,35 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-smultron-KANG-signed.zip
87,34 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-urushi-KANG-signed.zip
91,94 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-zeus-KANG-signed.zip
90,88 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-zeusc-KANG-signed.zip
90,50 MB

How do deal with those different downloads? Which one i need?

Other point is at #1 post:

Baseband 64 (recomanded for 2011 devices)
SEMC BASEBAND 64 - http://ul.to/folder/yrqfhn

but clicking on the link brings me to baseband 62 downlaod ??????

So can anyone clearify those problems please!!???

Thanks a lot! FXP im comming!!!

riginal · Mar 14, 2012

Olli80 said:

Hi there,

want to setle over to the FXP Rom but whats up here????

Code:

[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-anzu-KANG-signed.zip
92,17 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-coconut-KANG-signed.zip
87,34 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-es209ra-KANG-signed.zip
89,37 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-hallon-KANG-signed.zip
92,14 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-iyokan-KANG-signed.zip
92,14 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-mango-KANG-signed.zip
87,48 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-satsuma-KANG-signed.zip
87,35 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-smultron-KANG-signed.zip
87,34 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-urushi-KANG-signed.zip
91,94 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-zeus-KANG-signed.zip
90,88 MB
[Direktdownload-Funktion ist ausgeschaltet] 	
update-cm-7.2.0-RC0-zeusc-KANG-signed.zip
90,50 MB

How do deal with those different downloads? Which one i need?

Other point is at #1 post:

but clicking on the link brings me to baseband 62 downlaod ??????

So can anyone clearify those problems please!!???

Thanks a lot! FXP im comming!!!

Download the one containing "es209ra" which is the code name for X10

Dunno about your second question but why do you even bother about that? it's for 2011 xperia line not x10

lunarjetman1 · Mar 15, 2012

You need the kernel from fxp. Go to -
http://xdaforums.com/showthread.php?t=1322837

{X10} [Discussion Room] CyanogenMod by Team FreeXperia
For more info. This is development only.

Sent from my X10i using XDA

9Lukas5 · Mar 16, 2012

alforno said:
Hi,

I was on unlocked bootloader (bootlogo was experia and everything went well), then I tried to install CM9.0 RC0 and now my X10 only shows the Sony Ericsson screen and nothing more.

I tried Kernel Downgrade, baseband, stock with xrecovery, DoomKernel v06, M&M MiUI with flashtool 0.6.8.0, 0.2.9.1, 0.3, but nothing brings it up again.

With kernel downgrade I can see that it goes until 95% and ends, and I get the message everything is OK, but the boot ends with the Sony Ericsson screen.

And with the other kernels I get this message:

Please, can anybody help???

haha, the kernel downgrade is a android 2.1 sony ericsson kernel. Ofcourse you're getting a se logo.

patrik@xda · Mar 16, 2012

very fast and smooth, great job fxp!

Sent from my X10i using XDA

chikencito12 · Mar 18, 2012

And kernel?

Please give me the link

Hzu · Mar 18, 2012

chikencito12 said:
And kernel?

Please give me the link

Some people just never bothered to try and read few pages back since FXP's last post (announcement of FXP111 released), huh?

Very well, if you're that lazy, I will tell you. Use the kernel from FXP109. If you don't have it, download it from FXP's signature.

jerpelea · Mar 18, 2012

FXP112 released

patrik@xda · Mar 18, 2012

FXP 112 says there that the new adreno libs have been added for us but only in CM9, does this mean we already have these new libs in CM7? which leads me to me question of how to boost graphics performance on our X10? i got a misserable score of 7 fps in nena mark 2 :/
Sent from my CM7 powered Xperia X10

alexs790 · Mar 18, 2012

patrik@xda said:
FXP 112 says there that the new adreno libs have been added for us but only in CM9, does this mean we already have these new libs in CM7?

This is only for ICS. See here. Pay attention to "Adreno 2xx User-mode Android ICS Graphics Driver".

patrik@xda said:
how to boost graphics performance on our X10? i got a misserable score of 7 fps in nena mark 2 :/

Probably no way. Adreno200 is a very old and weak graphics accelerator.

{X10}[DEVELOPMENT] -FXP130- CM7.2.0 - RELEASED - FreeXperia Project

Senior Member

Senior Member

Senior Member

Inactive Recognized Contributor

Senior Member

Inactive Recognized Contributor

Senior Member

Senior Member

Senior Member

Senior Member

Attachments

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Recognized Developer

Senior Member

Senior Member

Similar threads

Top Liked Posts